McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 34

Question 330

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, the data center fabric team observes: A leaf can reach its directly connected spine but not the loopback used for BGP sessions. What observation should be required before this case is closed?

  1. The forwarding table matches the approved spine preference and still has required backup paths
  2. The remote route resolves to a usable forwarding next hop without fallback leakage
  3. The loopback addresses ping in the underlay and the corresponding BGP transport succeeds
  4. A policy test exports required fabric routes but denies representative tenant prefixes

Explanation

Correct Answer

C:

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, the decisive validation is: The loopback addresses ping in the underlay and the corresponding BGP transport succeeds. It verifies that the change (Provide correct loopback reachability through the intended routing design) resolved the mechanism: The underlay lacks a route to the remote loopback or its advertised prefix.

Incorrect Answers

A:

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, this option proposes: The forwarding table matches the approved spine preference and still has required backup paths. Using that approach would investigate Traffic follows an unexpected spine after a route-policy update instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The underlay lacks a route to the remote loopback or its advertised prefix.

B:

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, this option proposes: The remote route resolves to a usable forwarding next hop without fallback leakage. The alternative focuses on The received route's next hop cannot be resolved in the relevant routing instance, not on the stated defect. For this scenario the expected acceptance result would be: The loopback addresses ping in the underlay and the corresponding BGP transport succeeds.

D:

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, this option proposes: A policy test exports required fabric routes but denies representative tenant prefixes. It tests a different symptom: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. For the observed case, the relevant distinction is The underlay lacks a route to the remote loopback or its advertised prefix, with verification: The loopback addresses ping in the underlay and the corresponding BGP transport succeeds.

Question 331

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, the data center fabric team observes: A leaf can reach its directly connected spine but not the loopback used for BGP sessions. What causal finding should the investigation prioritize?

  1. The remaining path was omitted from routing adjacencies or next-hop eligibility
  2. A prefix match was broader than the approved route-exchange scope
  3. The underlay lacks a route to the remote loopback or its advertised prefix
  4. The destination prefix length does not cover the intended address range

Explanation

Correct Answer

C:

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, the evidence points to: The underlay lacks a route to the remote loopback or its advertised prefix. The follow-up test (The loopback addresses ping in the underlay and the corresponding BGP transport succeeds) distinguishes this mechanism from a separate fabric fault.

Incorrect Answers

A:

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, this option proposes: The remaining path was omitted from routing adjacencies or next-hop eligibility. The alternative focuses on The remaining path was omitted from routing adjacencies or next-hop eligibility, not on the stated defect. For this scenario the expected acceptance result would be: The loopback addresses ping in the underlay and the corresponding BGP transport succeeds.

B:

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, this option proposes: A prefix match was broader than the approved route-exchange scope. This option assumes the other problem (A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes) is present. The case instead describes A leaf can reach its directly connected spine but not the loopback used for BGP sessions, for which the causal issue is The underlay lacks a route to the remote loopback or its advertised prefix.

D:

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, this option proposes: The destination prefix length does not cover the intended address range. The option describes a different failure mode: An engineer configures a static route destination as a host when an entire subnet is needed. It would address The destination prefix length does not cover the intended address range, but here the case reports A leaf can reach its directly connected spine but not the loopback used for BGP sessions. The current required evidence is: The loopback addresses ping in the underlay and the corresponding BGP transport succeeds.

Question 332

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, the data center fabric team observes: A leaf can reach its directly connected spine but not the loopback used for BGP sessions. What ongoing operational safeguard directly addresses this root issue?

  1. Include discard-route inspection before promoting static changes
  2. Start routing incident triage with local interface and next-hop checks
  3. Verify loopback reachability before activating overlay peers
  4. Monitor unresolved next hops separately from BGP state

Explanation

Correct Answer

C:

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, for Meadowridge Municipal Networks, include the safeguard: Verify loopback reachability before activating overlay peers. It reduces repeat risk from the original mechanism and complements a validation of: The loopback addresses ping in the underlay and the corresponding BGP transport succeeds.

Incorrect Answers

A:

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, this option proposes: Include discard-route inspection before promoting static changes. This option assumes the other problem (A static route sends production traffic into a blackhole after an emergency change) is present. The case instead describes A leaf can reach its directly connected spine but not the loopback used for BGP sessions, for which the causal issue is The underlay lacks a route to the remote loopback or its advertised prefix.

B:

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, this option proposes: Start routing incident triage with local interface and next-hop checks. It tests a different symptom: A routing incident is blamed on BGP even though an interface has no operational carrier. For the observed case, the relevant distinction is The underlay lacks a route to the remote loopback or its advertised prefix, with verification: The loopback addresses ping in the underlay and the corresponding BGP transport succeeds.

D:

At Meadowridge Municipal Networks, while verifying multiple equal-cost paths, this option proposes: Monitor unresolved next hops separately from BGP state. That choice would be more relevant when this different symptom occurs: A neighbor's BGP Established state masks a missing remote gateway next hop. The present scenario instead points to: The underlay lacks a route to the remote loopback or its advertised prefix. The correct resolution has its own verification outcome: The loopback addresses ping in the underlay and the corresponding BGP transport succeeds.

Question 333

At Suncrest Health Systems, while restoring an underlay BGP adjacency, the data center fabric team observes: A static route sends production traffic into a blackhole after an emergency change. Which supported remediation most directly addresses the stated failure?

  1. Remove the unintended discard action and install the approved reachable next-hop group
  2. Correct the local and peer AS values to match the fabric plan
  3. Commit and verify persistent underlay routing configuration prior to controlled reboot
  4. Align the BGP source address, peer target and required routing path

Explanation

Correct Answer

A:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, remove the unintended discard action and install the approved reachable next-hop group. This addresses the specific failure mechanism (An unintended discard next-hop or blackhole action was selected) rather than treating only the visible alarm. The required acceptance evidence is: The test destination is reached while the blackhole action is absent from the route.

Incorrect Answers

B:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, this option proposes: Correct the local and peer AS values to match the fabric plan. That choice would be more relevant when this different symptom occurs: A BGP neighbor remains stuck due to a mismatched local or peer autonomous system. The present scenario instead points to: An unintended discard next-hop or blackhole action was selected. The correct resolution has its own verification outcome: The test destination is reached while the blackhole action is absent from the route.

C:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, this option proposes: Commit and verify persistent underlay routing configuration prior to controlled reboot. This is a valid category of fabric maintenance for another scenario (An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit), not the targeted action for Suncrest Health Systems. The distinction is the actual cause: An unintended discard next-hop or blackhole action was selected.

D:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, this option proposes: Align the BGP source address, peer target and required routing path. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The session's source address does not match the remote peer definition and route reachability. The evidence in the current case requires a different result: The test destination is reached while the blackhole action is absent from the route.

Question 334

At Suncrest Health Systems, while restoring an underlay BGP adjacency, the data center fabric team observes: A static route sends production traffic into a blackhole after an emergency change. Which evidence directly validates the intended repair?

  1. The test destination is reached while the blackhole action is absent from the route
  2. The approved route enters the intended route table without leaking unwanted prefixes
  3. The forwarding table matches the approved spine preference and still has required backup paths
  4. The BGP TCP session establishes and the peer reaches the expected state

Explanation

Correct Answer

A:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, this result is the relevant closure evidence: The test destination is reached while the blackhole action is absent from the route. It checks the effect of: Remove the unintended discard action and install the approved reachable next-hop group. The underlying issue was: An unintended discard next-hop or blackhole action was selected.

Incorrect Answers

B:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, this option proposes: The approved route enters the intended route table without leaking unwanted prefixes. This is a valid category of fabric maintenance for another scenario (A leaf receives an underlay route but it is rejected from the active routing table), not the targeted action for Suncrest Health Systems. The distinction is the actual cause: An unintended discard next-hop or blackhole action was selected.

C:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, this option proposes: The forwarding table matches the approved spine preference and still has required backup paths. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The path preference or BGP route attributes changed without validating selected forwarding paths. The evidence in the current case requires a different result: The test destination is reached while the blackhole action is absent from the route.

D:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, this option proposes: The BGP TCP session establishes and the peer reaches the expected state. Using that approach would investigate Two fabric peers have BGP configured but the session stays Idle with no TCP connection instead. No evidence for that separate failure is supplied here; the reported case is consistent with: An unintended discard next-hop or blackhole action was selected.

Question 335

At Suncrest Health Systems, while restoring an underlay BGP adjacency, the data center fabric team observes: A static route sends production traffic into a blackhole after an emergency change. Which underlying mechanism best accounts for this symptom?

  1. An unintended discard next-hop or blackhole action was selected
  2. The required routing configuration existed only in uncommitted candidate state
  3. The path preference or BGP route attributes changed without validating selected forwarding paths
  4. The underlay lacks a route to the remote loopback or its advertised prefix

Explanation

Correct Answer

A:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, for Suncrest Health Systems, investigate this cause first: An unintended discard next-hop or blackhole action was selected. It is directly linked to the observed symptom rather than another service issue.

Incorrect Answers

B:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, this option proposes: The required routing configuration existed only in uncommitted candidate state. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The required routing configuration existed only in uncommitted candidate state. The evidence in the current case requires a different result: The test destination is reached while the blackhole action is absent from the route.

C:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, this option proposes: The path preference or BGP route attributes changed without validating selected forwarding paths. Using that approach would investigate Traffic follows an unexpected spine after a route-policy update instead. No evidence for that separate failure is supplied here; the reported case is consistent with: An unintended discard next-hop or blackhole action was selected.

D:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, this option proposes: The underlay lacks a route to the remote loopback or its advertised prefix. The alternative focuses on The underlay lacks a route to the remote loopback or its advertised prefix, not on the stated defect. For this scenario the expected acceptance result would be: The test destination is reached while the blackhole action is absent from the route.

Question 336

At Suncrest Health Systems, while restoring an underlay BGP adjacency, the data center fabric team observes: A static route sends production traffic into a blackhole after an emergency change. Which review gate should be added to prevent the same error?

  1. Check encapsulation and interface state before route-policy adjustments
  2. Review BGP source-interface assumptions for multihop peering
  3. Include discard-route inspection before promoting static changes
  4. Maintain explicit management-prefix exclusion tests

Explanation

Correct Answer

C:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, for Suncrest Health Systems, include the safeguard: Include discard-route inspection before promoting static changes. It reduces repeat risk from the original mechanism and complements a validation of: The test destination is reached while the blackhole action is absent from the route.

Incorrect Answers

A:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, this option proposes: Check encapsulation and interface state before route-policy adjustments. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The control-plane frames do not reach the intended tagged subinterface. The evidence in the current case requires a different result: The test destination is reached while the blackhole action is absent from the route.

B:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, this option proposes: Review BGP source-interface assumptions for multihop peering. Using that approach would investigate An eBGP leaf peering configuration uses an incorrect update source for loopback peering instead. No evidence for that separate failure is supplied here; the reported case is consistent with: An unintended discard next-hop or blackhole action was selected.

D:

At Suncrest Health Systems, while restoring an underlay BGP adjacency, this option proposes: Maintain explicit management-prefix exclusion tests. This option assumes the other problem (A leaf exports its connected management subnet into tenant-visible fabric routing) is present. The case instead describes A static route sends production traffic into a blackhole after an emergency change, for which the causal issue is An unintended discard next-hop or blackhole action was selected.

Question 337

At Highcrest Rail Logistics, while planning a link-failure test, the data center fabric team observes: A static default route appears in configuration but never forwards traffic. What configuration or operational change should the engineer prioritize?

  1. Inspect rejected path attributes and the configured import policy before making a scoped correction
  2. Correct the next-hop-group membership and adjacency reachability
  3. Align the BGP source address, peer target and required routing path
  4. Correct the approved fabric edge route exchange and return-path policy

Explanation

Correct Answer

B:

At Highcrest Rail Logistics, while planning a link-failure test, for Highcrest Rail Logistics, the applicable change is: Correct the next-hop-group membership and adjacency reachability. The causal issue is: The referenced next-hop group has no reachable selected member. A successful validation would show: The default route resolves to an active next hop and controlled traffic reaches the gateway.

Incorrect Answers

A:

At Highcrest Rail Logistics, while planning a link-failure test, this option proposes: Inspect rejected path attributes and the configured import policy before making a scoped correction. The alternative focuses on An import policy or preference calculation rejects the proposed route, not on the stated defect. For this scenario the expected acceptance result would be: The default route resolves to an active next hop and controlled traffic reaches the gateway.

C:

At Highcrest Rail Logistics, while planning a link-failure test, this option proposes: Align the BGP source address, peer target and required routing path. It tests a different symptom: An eBGP leaf peering configuration uses an incorrect update source for loopback peering. For the observed case, the relevant distinction is The referenced next-hop group has no reachable selected member, with verification: The default route resolves to an active next hop and controlled traffic reaches the gateway.

D:

The fabric edge lacks a route toward the external destination or the return subnet, but here the case reports A static default route appears in configuration but never forwards traffic. Here, the referenced next-hop group has no reachable selected member.

Question 338

At Highcrest Rail Logistics, while planning a link-failure test, the data center fabric team observes: A static default route appears in configuration but never forwards traffic. What test result proves the affected fabric function now works?

  1. The appropriate Layer 3 adjacency forms and exchanges required routes
  2. A policy test exports required fabric routes but denies representative tenant prefixes
  3. The interface is up and its expected control-plane session establishes
  4. The default route resolves to an active next hop and controlled traffic reaches the gateway

Explanation

Correct Answer

D:

At Highcrest Rail Logistics, while planning a link-failure test, the default route resolves to an active next hop and controlled traffic reaches the gateway. This is linked directly to the observed symptom (A static default route appears in configuration but never forwards traffic) and cannot be replaced by an unrelated healthy dashboard.

Incorrect Answers

A:

At Highcrest Rail Logistics, while planning a link-failure test, this option proposes: The appropriate Layer 3 adjacency forms and exchanges required routes. This option assumes the other problem (Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes) is present. The case instead describes A static default route appears in configuration but never forwards traffic, for which the causal issue is The referenced next-hop group has no reachable selected member.

B:

At Highcrest Rail Logistics, while planning a link-failure test, this option proposes: A policy test exports required fabric routes but denies representative tenant prefixes. It tests a different symptom: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. For the observed case, the relevant distinction is The referenced next-hop group has no reachable selected member, with verification: The default route resolves to an active next hop and controlled traffic reaches the gateway.

C:

At Highcrest Rail Logistics, while planning a link-failure test, this option proposes: The interface is up and its expected control-plane session establishes. The option describes a different failure mode: A routing incident is blamed on BGP even though an interface has no operational carrier. It would address Troubleshooting began at the protocol layer without validating lower-layer status, but here the case reports A static default route appears in configuration but never forwards traffic. The current required evidence is: The default route resolves to an active next hop and controlled traffic reaches the gateway.

Question 339

At Highcrest Rail Logistics, while planning a link-failure test, the data center fabric team observes: A static default route appears in configuration but never forwards traffic. What specific misconfiguration or design error is most likely?

  1. The two sides disagree on the expected remote AS number
  2. BFD detection values are too aggressive for the observed link characteristics
  3. The referenced next-hop group has no reachable selected member
  4. The path preference or BGP route attributes changed without validating selected forwarding paths

Explanation

Correct Answer

C:

At Highcrest Rail Logistics, while planning a link-failure test, the evidence points to: The referenced next-hop group has no reachable selected member. The follow-up test (The default route resolves to an active next hop and controlled traffic reaches the gateway) distinguishes this mechanism from a separate fabric fault.

Incorrect Answers

A:

At Highcrest Rail Logistics, while planning a link-failure test, this option proposes: The two sides disagree on the expected remote AS number. It tests a different symptom: A BGP neighbor remains stuck due to a mismatched local or peer autonomous system. For the observed case, the relevant distinction is The referenced next-hop group has no reachable selected member, with verification: The default route resolves to an active next hop and controlled traffic reaches the gateway.

B:

At Highcrest Rail Logistics, while planning a link-failure test, this option proposes: BFD detection values are too aggressive for the observed link characteristics. The option describes a different failure mode: A leaf's BGP session resets repeatedly after a minor interface disturbance. It would address BFD detection values are too aggressive for the observed link characteristics, but here the case reports A static default route appears in configuration but never forwards traffic. The current required evidence is: The default route resolves to an active next hop and controlled traffic reaches the gateway.

D:

At Highcrest Rail Logistics, while planning a link-failure test, this option proposes: The path preference or BGP route attributes changed without validating selected forwarding paths. This is a valid category of fabric maintenance for another scenario (Traffic follows an unexpected spine after a route-policy update), not the targeted action for Highcrest Rail Logistics. The distinction is the actual cause: The referenced next-hop group has no reachable selected member.

Question 340

At Highcrest Rail Logistics, while planning a link-failure test, the data center fabric team observes: A static default route appears in configuration but never forwards traffic. What repeatable acceptance check would reduce recurrence?

  1. Check data-plane path programming whenever peer counts change
  2. Include post-reboot persistence in routing change acceptance
  3. Monitor next-hop resolution, not merely static-route configuration presence
  4. Include peer transport checks before tuning route policies

Explanation

Correct Answer

C:

At Highcrest Rail Logistics, while planning a link-failure test, for Highcrest Rail Logistics, include the safeguard: Monitor next-hop resolution, not merely static-route configuration presence. It reduces repeat risk from the original mechanism and complements a validation of: The default route resolves to an active next hop and controlled traffic reaches the gateway.

Incorrect Answers

A:

At Highcrest Rail Logistics, while planning a link-failure test, this option proposes: Check data-plane path programming whenever peer counts change. The option describes a different failure mode: A network engineer assumes multiple BGP peers automatically imply load-balanced traffic. It would address The active forwarding table has only one selected path despite several control-plane peers, but here the case reports A static default route appears in configuration but never forwards traffic. The current required evidence is: The default route resolves to an active next hop and controlled traffic reaches the gateway.

B:

At Highcrest Rail Logistics, while planning a link-failure test, this option proposes: Include post-reboot persistence in routing change acceptance. That choice would be more relevant when this different symptom occurs: An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit. The present scenario instead points to: The referenced next-hop group has no reachable selected member. The correct resolution has its own verification outcome: The default route resolves to an active next hop and controlled traffic reaches the gateway.

D:

At Highcrest Rail Logistics, while planning a link-failure test, this option proposes: Include peer transport checks before tuning route policies. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The peer address is unreachable or TCP 179 is blocked by the underlay policy. The evidence in the current case requires a different result: The default route resolves to an active next hop and controlled traffic reaches the gateway.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests