McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 31

Question 300

At Northpoint Health Systems, while restoring an underlay BGP adjacency, the data center fabric team observes: Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes. What ongoing operational safeguard directly addresses this root issue?

  1. Validate symmetric reachability across fabric-to-external boundaries
  2. Use positive and negative prefix fixtures when revising route policy
  3. Check encapsulation and interface state before route-policy adjustments
  4. Maintain explicit management-prefix exclusion tests

Explanation

Correct Answer

C:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, for Northpoint Health Systems, include the safeguard: Check encapsulation and interface state before route-policy adjustments. It reduces repeat risk from the original mechanism and complements a validation of: The appropriate Layer 3 adjacency forms and exchanges required routes.

Incorrect Answers

A:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: Validate symmetric reachability across fabric-to-external boundaries. This option assumes the other problem (A new server subnet cannot reach external routed services although its gateway replies) is present. The case instead describes Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes, for which the causal issue is The control-plane frames do not reach the intended tagged subinterface.

B:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: Use positive and negative prefix fixtures when revising route policy. It tests a different symptom: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. For the observed case, the relevant distinction is The control-plane frames do not reach the intended tagged subinterface, with verification: The appropriate Layer 3 adjacency forms and exchanges required routes.

D:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: Maintain explicit management-prefix exclusion tests. That choice would be more relevant when this different symptom occurs: A leaf exports its connected management subnet into tenant-visible fabric routing. The present scenario instead points to: The control-plane frames do not reach the intended tagged subinterface. The correct resolution has its own verification outcome: The appropriate Layer 3 adjacency forms and exchanges required routes.

Question 301

At Winterfield Energy Services, while investigating next-hop reachability, the data center fabric team observes: A routing incident is blamed on BGP even though an interface has no operational carrier. Which supported remediation most directly addresses the stated failure?

  1. Inspect rejected path attributes and the configured import policy before making a scoped correction
  2. Restrict route origination and export to the required network-service prefixes
  3. Restore physical interface health and then review peer and route state
  4. Remove the unintended discard action and install the approved reachable next-hop group

Explanation

Correct Answer

C:

At Winterfield Energy Services, while investigating next-hop reachability, choose this remediation because it targets the mechanism: Troubleshooting began at the protocol layer without validating lower-layer status. The supported corrective action is: Restore physical interface health and then review peer and route state. Verification requires: The interface is up and its expected control-plane session establishes.

Incorrect Answers

A:

An import policy or preference calculation rejects the proposed route, but here the case reports A routing incident is blamed on BGP even though an interface has no operational carrier. Here, troubleshooting began at the protocol layer without validating lower-layer status.

B:

A leaf exports its connected management subnet into tenant-visible fabric routing. Here, troubleshooting began at the protocol layer without validating lower-layer status.

D:

At Winterfield Energy Services, while investigating next-hop reachability, this option proposes: Remove the unintended discard action and install the approved reachable next-hop group. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: An unintended discard next-hop or blackhole action was selected. The evidence in the current case requires a different result: The interface is up and its expected control-plane session establishes.

Question 302

At Winterfield Energy Services, while investigating next-hop reachability, the data center fabric team observes: A routing incident is blamed on BGP even though an interface has no operational carrier. Which evidence directly validates the intended repair?

  1. Both peers reach Established using the approved AS assignment
  2. The test destination is reached while the blackhole action is absent from the route
  3. The interface is up and its expected control-plane session establishes
  4. The remote peer sees the expected source and the session reaches Established

Explanation

Correct Answer

C:

At Winterfield Energy Services, while investigating next-hop reachability, the decisive validation is: The interface is up and its expected control-plane session establishes. It verifies that the change (Restore physical interface health and then review peer and route state) resolved the mechanism: Troubleshooting began at the protocol layer without validating lower-layer status.

Incorrect Answers

A:

A BGP neighbor remains stuck due to a mismatched local or peer autonomous system. Here, troubleshooting began at the protocol layer without validating lower-layer status.

B:

At Winterfield Energy Services, while investigating next-hop reachability, this option proposes: The test destination is reached while the blackhole action is absent from the route. This is a valid category of fabric maintenance for another scenario (A static route sends production traffic into a blackhole after an emergency change), not the targeted action for Winterfield Energy Services. The distinction is the actual cause: Troubleshooting began at the protocol layer without validating lower-layer status.

D:

At Winterfield Energy Services, while investigating next-hop reachability, this option proposes: The remote peer sees the expected source and the session reaches Established. Using that approach would investigate An eBGP leaf peering configuration uses an incorrect update source for loopback peering instead. No evidence for that separate failure is supplied here; the reported case is consistent with: Troubleshooting began at the protocol layer without validating lower-layer status.

Question 303

At Winterfield Energy Services, while investigating next-hop reachability, the data center fabric team observes: A routing incident is blamed on BGP even though an interface has no operational carrier. Which underlying mechanism best accounts for this symptom?

  1. The learned routes differ in preference or multipath eligibility
  2. The destination prefix length does not cover the intended address range
  3. The fabric edge lacks a route toward the external destination or the return subnet
  4. Troubleshooting began at the protocol layer without validating lower-layer status

Explanation

Correct Answer

D:

At Winterfield Energy Services, while investigating next-hop reachability, troubleshooting began at the protocol layer without validating lower-layer status. That is the cause of the described failure, and a corrective check should demonstrate: The interface is up and its expected control-plane session establishes.

Incorrect Answers

A:

At Winterfield Energy Services, while investigating next-hop reachability, this option proposes: The learned routes differ in preference or multipath eligibility. This is a valid category of fabric maintenance for another scenario (All spine-to-leaf BGP sessions exist but one leaf uses a single path instead of ECMP), not the targeted action for Winterfield Energy Services. The distinction is the actual cause: Troubleshooting began at the protocol layer without validating lower-layer status.

B:

At Winterfield Energy Services, while investigating next-hop reachability, this option proposes: The destination prefix length does not cover the intended address range. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The destination prefix length does not cover the intended address range. The evidence in the current case requires a different result: The interface is up and its expected control-plane session establishes.

C:

At Winterfield Energy Services, while investigating next-hop reachability, this option proposes: The fabric edge lacks a route toward the external destination or the return subnet. Using that approach would investigate A new server subnet cannot reach external routed services although its gateway replies instead. No evidence for that separate failure is supplied here; the reported case is consistent with: Troubleshooting began at the protocol layer without validating lower-layer status.

Question 304

At Winterfield Energy Services, while investigating next-hop reachability, the data center fabric team observes: A routing incident is blamed on BGP even though an interface has no operational carrier. Which review gate should be added to prevent the same error?

  1. Start routing incident triage with local interface and next-hop checks
  2. Test BFD and BGP failure handling together in maintenance drills
  3. Validate symmetric reachability across fabric-to-external boundaries
  4. Include post-reboot persistence in routing change acceptance

Explanation

Correct Answer

A:

At Winterfield Energy Services, while investigating next-hop reachability, the preventive control is: Start routing incident triage with local interface and next-hop checks. It catches the same mechanism (Troubleshooting began at the protocol layer without validating lower-layer status) before the symptom recurs. An appropriate regression observation is: The interface is up and its expected control-plane session establishes.

Incorrect Answers

B:

At Winterfield Energy Services, while investigating next-hop reachability, this option proposes: Test BFD and BGP failure handling together in maintenance drills. Using that approach would investigate A BFD session shows Down while the BGP peer continues waiting for its normal hold timer instead. No evidence for that separate failure is supplied here; the reported case is consistent with: Troubleshooting began at the protocol layer without validating lower-layer status.

C:

At Winterfield Energy Services, while investigating next-hop reachability, this option proposes: Validate symmetric reachability across fabric-to-external boundaries. The alternative focuses on The fabric edge lacks a route toward the external destination or the return subnet, not on the stated defect. For this scenario the expected acceptance result would be: The interface is up and its expected control-plane session establishes.

D:

At Winterfield Energy Services, while investigating next-hop reachability, this option proposes: Include post-reboot persistence in routing change acceptance. This option assumes the other problem (An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit) is present. The case instead describes A routing incident is blamed on BGP even though an interface has no operational carrier, for which the causal issue is Troubleshooting began at the protocol layer without validating lower-layer status.

Question 305

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, the data center fabric team observes: An underlay peer advertises only IPv4 while an expected IPv6 reachability test fails. What configuration or operational change should the engineer prioritize?

  1. Correct the tagged subinterface binding and validate neighbor-layer connectivity before BGP changes
  2. Configure the required IPv6 address family and approved prefix advertisements
  3. Restore physical interface health and then review peer and route state
  4. Check peer BFD configuration and physical path before adjusting detection policy

Explanation

Correct Answer

B:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, for Maplebridge Digital Commerce, the applicable change is: Configure the required IPv6 address family and approved prefix advertisements. The causal issue is: IPv6 family activation or transport address configuration is missing on that adjacency. A successful validation would show: The IPv6 peer learns the intended network and forwards a controlled IPv6 packet.

Incorrect Answers

A:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, this option proposes: Correct the tagged subinterface binding and validate neighbor-layer connectivity before BGP changes. The alternative focuses on The control-plane frames do not reach the intended tagged subinterface, not on the stated defect. For this scenario the expected acceptance result would be: The IPv6 peer learns the intended network and forwards a controlled IPv6 packet.

C:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, this option proposes: Restore physical interface health and then review peer and route state. It tests a different symptom: A routing incident is blamed on BGP even though an interface has no operational carrier. For the observed case, the relevant distinction is IPv6 family activation or transport address configuration is missing on that adjacency, with verification: The IPv6 peer learns the intended network and forwards a controlled IPv6 packet.

D:

BFD connectivity or session parameters are incompatible across the peer pair, but here the case reports An underlay peer advertises only IPv4 while an expected IPv6 reachability test fails. Here, iPv6 family activation or transport address configuration is missing on that adjacency.

Question 306

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, the data center fabric team observes: An underlay peer advertises only IPv4 while an expected IPv6 reachability test fails. What test result proves the affected fabric function now works?

  1. An end-to-end test succeeds with routes present in both forward and return directions
  2. The IPv6 peer learns the intended network and forwards a controlled IPv6 packet
  3. The selected route exposes multiple valid next hops and a link-loss test preserves access
  4. The forwarding table matches the approved spine preference and still has required backup paths

Explanation

Correct Answer

B:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, for Maplebridge Digital Commerce, accept the repair only after this observation: The IPv6 peer learns the intended network and forwards a controlled IPv6 packet. The test distinguishes real recovery from a superficial status change.

Incorrect Answers

A:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, this option proposes: An end-to-end test succeeds with routes present in both forward and return directions. This option assumes the other problem (A new server subnet cannot reach external routed services although its gateway replies) is present. The case instead describes An underlay peer advertises only IPv4 while an expected IPv6 reachability test fails, for which the causal issue is IPv6 family activation or transport address configuration is missing on that adjacency.

C:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, this option proposes: The selected route exposes multiple valid next hops and a link-loss test preserves access. The option describes a different failure mode: All spine-to-leaf BGP sessions exist but one leaf uses a single path instead of ECMP. It would address The learned routes differ in preference or multipath eligibility, but here the case reports An underlay peer advertises only IPv4 while an expected IPv6 reachability test fails. The current required evidence is: The IPv6 peer learns the intended network and forwards a controlled IPv6 packet.

D:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, this option proposes: The forwarding table matches the approved spine preference and still has required backup paths. That choice would be more relevant when this different symptom occurs: Traffic follows an unexpected spine after a route-policy update. The present scenario instead points to: IPv6 family activation or transport address configuration is missing on that adjacency. The correct resolution has its own verification outcome: The IPv6 peer learns the intended network and forwards a controlled IPv6 packet.

Question 307

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, the data center fabric team observes: An underlay peer advertises only IPv4 while an expected IPv6 reachability test fails. What specific misconfiguration or design error is most likely?

  1. The referenced next-hop group has no reachable selected member
  2. An unintended discard next-hop or blackhole action was selected
  3. Troubleshooting began at the protocol layer without validating lower-layer status
  4. IPv6 family activation or transport address configuration is missing on that adjacency

Explanation

Correct Answer

D:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, iPv6 family activation or transport address configuration is missing on that adjacency. That is the cause of the described failure, and a corrective check should demonstrate: The IPv6 peer learns the intended network and forwards a controlled IPv6 packet.

Incorrect Answers

A:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, this option proposes: The referenced next-hop group has no reachable selected member. It tests a different symptom: A static default route appears in configuration but never forwards traffic. For the observed case, the relevant distinction is IPv6 family activation or transport address configuration is missing on that adjacency, with verification: The IPv6 peer learns the intended network and forwards a controlled IPv6 packet.

B:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, this option proposes: An unintended discard next-hop or blackhole action was selected. The option describes a different failure mode: A static route sends production traffic into a blackhole after an emergency change. It would address An unintended discard next-hop or blackhole action was selected, but here the case reports An underlay peer advertises only IPv4 while an expected IPv6 reachability test fails. The current required evidence is: The IPv6 peer learns the intended network and forwards a controlled IPv6 packet.

C:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, this option proposes: Troubleshooting began at the protocol layer without validating lower-layer status. That choice would be more relevant when this different symptom occurs: A routing incident is blamed on BGP even though an interface has no operational carrier. The present scenario instead points to: IPv6 family activation or transport address configuration is missing on that adjacency. The correct resolution has its own verification outcome: The IPv6 peer learns the intended network and forwards a controlled IPv6 packet.

Question 308

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, the data center fabric team observes: An underlay peer advertises only IPv4 while an expected IPv6 reachability test fails. What repeatable acceptance check would reduce recurrence?

  1. Check data-plane path programming whenever peer counts change
  2. Start routing incident triage with local interface and next-hop checks
  3. Include discard-route inspection before promoting static changes
  4. Validate AFI/SAFI and IPv6 routes independently from IPv4

Explanation

Correct Answer

D:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, use this repeatable control: Validate AFI/SAFI and IPv6 routes independently from IPv4. Its scope is the problem (IPv6 family activation or transport address configuration is missing on that adjacency), not an unrelated network maintenance procedure.

Incorrect Answers

A:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, this option proposes: Check data-plane path programming whenever peer counts change. The option describes a different failure mode: A network engineer assumes multiple BGP peers automatically imply load-balanced traffic. It would address The active forwarding table has only one selected path despite several control-plane peers, but here the case reports An underlay peer advertises only IPv4 while an expected IPv6 reachability test fails. The current required evidence is: The IPv6 peer learns the intended network and forwards a controlled IPv6 packet.

B:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, this option proposes: Start routing incident triage with local interface and next-hop checks. That choice would be more relevant when this different symptom occurs: A routing incident is blamed on BGP even though an interface has no operational carrier. The present scenario instead points to: IPv6 family activation or transport address configuration is missing on that adjacency. The correct resolution has its own verification outcome: The IPv6 peer learns the intended network and forwards a controlled IPv6 packet.

C:

At Maplebridge Digital Commerce, while commissioning a routed spine uplink, this option proposes: Include discard-route inspection before promoting static changes. This is a valid category of fabric maintenance for another scenario (A static route sends production traffic into a blackhole after an emergency change), not the targeted action for Maplebridge Digital Commerce. The distinction is the actual cause: IPv6 family activation or transport address configuration is missing on that adjacency.

Question 309

At Cresthaven Energy Services, while planning a link-failure test, the data center fabric team observes: A static route sends production traffic into a blackhole after an emergency change. Which action resolves the identified fabric-management issue?

  1. Provide correct loopback reachability through the intended routing design
  2. Correct the local and peer AS values to match the fabric plan
  3. Remove the unintended discard action and install the approved reachable next-hop group
  4. Review BGP path attributes and ECMP configuration to permit only equivalent eligible paths

Explanation

Correct Answer

C:

At Cresthaven Energy Services, while planning a link-failure test, choose this remediation because it targets the mechanism: An unintended discard next-hop or blackhole action was selected. The supported corrective action is: Remove the unintended discard action and install the approved reachable next-hop group. Verification requires: The test destination is reached while the blackhole action is absent from the route.

Incorrect Answers

A:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: Provide correct loopback reachability through the intended routing design. This is a valid category of fabric maintenance for another scenario (A leaf can reach its directly connected spine but not the loopback used for BGP sessions), not the targeted action for Cresthaven Energy Services. The distinction is the actual cause: An unintended discard next-hop or blackhole action was selected.

B:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: Correct the local and peer AS values to match the fabric plan. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The two sides disagree on the expected remote AS number. The evidence in the current case requires a different result: The test destination is reached while the blackhole action is absent from the route.

D:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: Review BGP path attributes and ECMP configuration to permit only equivalent eligible paths. The alternative focuses on The learned routes differ in preference or multipath eligibility, not on the stated defect. For this scenario the expected acceptance result would be: The test destination is reached while the blackhole action is absent from the route.

Question 310

At Cresthaven Energy Services, while planning a link-failure test, the data center fabric team observes: A static route sends production traffic into a blackhole after an emergency change. Which result would establish that the original defect has been corrected?

  1. The test destination is reached while the blackhole action is absent from the route
  2. Tenant route tables exclude the management network while underlay reachability remains
  3. BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction
  4. The interface is up and its expected control-plane session establishes

Explanation

Correct Answer

A:

At Cresthaven Energy Services, while planning a link-failure test, this result is the relevant closure evidence: The test destination is reached while the blackhole action is absent from the route. It checks the effect of: Remove the unintended discard action and install the approved reachable next-hop group. The underlying issue was: An unintended discard next-hop or blackhole action was selected.

Incorrect Answers

B:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: Tenant route tables exclude the management network while underlay reachability remains. Using that approach would investigate A leaf exports its connected management subnet into tenant-visible fabric routing instead. No evidence for that separate failure is supplied here; the reported case is consistent with: An unintended discard next-hop or blackhole action was selected.

C:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction. The alternative focuses on BFD connectivity or session parameters are incompatible across the peer pair, not on the stated defect. For this scenario the expected acceptance result would be: The test destination is reached while the blackhole action is absent from the route.

D:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: The interface is up and its expected control-plane session establishes. This option assumes the other problem (A routing incident is blamed on BGP even though an interface has no operational carrier) is present. The case instead describes A static route sends production traffic into a blackhole after an emergency change, for which the causal issue is An unintended discard next-hop or blackhole action was selected.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests