McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 30

Question 290

At Stonegate Energy Services, while verifying multiple equal-cost paths, the data center fabric team observes: An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit. What test result proves the affected fabric function now works?

  1. The route and BGP state return automatically after restart under approved config
  2. The remote peer sees the expected source and the session reaches Established
  3. Both peers reach Established using the approved AS assignment
  4. The test destination is reached while the blackhole action is absent from the route

Explanation

Correct Answer

A:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this result is the relevant closure evidence: The route and BGP state return automatically after restart under approved config. It checks the effect of: Commit and verify persistent underlay routing configuration prior to controlled reboot. The underlying issue was: The required routing configuration existed only in uncommitted candidate state.

Incorrect Answers

B:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: The remote peer sees the expected source and the session reaches Established. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The session's source address does not match the remote peer definition and route reachability. The evidence in the current case requires a different result: The route and BGP state return automatically after restart under approved config.

C:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: Both peers reach Established using the approved AS assignment. Using that approach would investigate A BGP neighbor remains stuck due to a mismatched local or peer autonomous system instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The required routing configuration existed only in uncommitted candidate state.

D:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: The test destination is reached while the blackhole action is absent from the route. The alternative focuses on An unintended discard next-hop or blackhole action was selected, not on the stated defect. For this scenario the expected acceptance result would be: The route and BGP state return automatically after restart under approved config.

Question 291

At Stonegate Energy Services, while verifying multiple equal-cost paths, the data center fabric team observes: An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit. What specific misconfiguration or design error is most likely?

  1. Troubleshooting began at the protocol layer without validating lower-layer status
  2. The required routing configuration existed only in uncommitted candidate state
  3. The path preference or BGP route attributes changed without validating selected forwarding paths
  4. A prefix match was broader than the approved route-exchange scope

Explanation

Correct Answer

B:

At Stonegate Energy Services, while verifying multiple equal-cost paths, the specific mechanism is: The required routing configuration existed only in uncommitted candidate state. It explains the reported state: An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit. The targeted corrective action is: Commit and verify persistent underlay routing configuration prior to controlled reboot.

Incorrect Answers

A:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: Troubleshooting began at the protocol layer without validating lower-layer status. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: Troubleshooting began at the protocol layer without validating lower-layer status. The evidence in the current case requires a different result: The route and BGP state return automatically after restart under approved config.

C:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: The path preference or BGP route attributes changed without validating selected forwarding paths. The alternative focuses on The path preference or BGP route attributes changed without validating selected forwarding paths, not on the stated defect. For this scenario the expected acceptance result would be: The route and BGP state return automatically after restart under approved config.

D:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: A prefix match was broader than the approved route-exchange scope. This option assumes the other problem (A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes) is present. The case instead describes An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit, for which the causal issue is The required routing configuration existed only in uncommitted candidate state.

Question 292

At Stonegate Energy Services, while verifying multiple equal-cost paths, the data center fabric team observes: An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit. What repeatable acceptance check would reduce recurrence?

  1. Exercise next-hop failure against all critical static routes
  2. Check data-plane path programming whenever peer counts change
  3. Validate symmetric reachability across fabric-to-external boundaries
  4. Include post-reboot persistence in routing change acceptance

Explanation

Correct Answer

D:

At Stonegate Energy Services, while verifying multiple equal-cost paths, use this repeatable control: Include post-reboot persistence in routing change acceptance. Its scope is the problem (The required routing configuration existed only in uncommitted candidate state), not an unrelated network maintenance procedure.

Incorrect Answers

A:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: Exercise next-hop failure against all critical static routes. Using that approach would investigate A route remains installed after its intended physical next hop fails instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The required routing configuration existed only in uncommitted candidate state.

B:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: Check data-plane path programming whenever peer counts change. The alternative focuses on The active forwarding table has only one selected path despite several control-plane peers, not on the stated defect. For this scenario the expected acceptance result would be: The route and BGP state return automatically after restart under approved config.

C:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: Validate symmetric reachability across fabric-to-external boundaries. This option assumes the other problem (A new server subnet cannot reach external routed services although its gateway replies) is present. The case instead describes An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit, for which the causal issue is The required routing configuration existed only in uncommitted candidate state.

Question 293

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, the data center fabric team observes: All spine-to-leaf BGP sessions exist but one leaf uses a single path instead of ECMP. Which action resolves the identified fabric-management issue?

  1. Review BGP path attributes and ECMP configuration to permit only equivalent eligible paths
  2. Correct the next-hop-group membership and adjacency reachability
  3. Remove the unintended discard action and install the approved reachable next-hop group
  4. Check peer BFD configuration and physical path before adjusting detection policy

Explanation

Correct Answer

A:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, review BGP path attributes and ECMP configuration to permit only equivalent eligible paths. This addresses the specific failure mechanism (The learned routes differ in preference or multipath eligibility) rather than treating only the visible alarm. The required acceptance evidence is: The selected route exposes multiple valid next hops and a link-loss test preserves access.

Incorrect Answers

B:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, this option proposes: Correct the next-hop-group membership and adjacency reachability. It tests a different symptom: A static default route appears in configuration but never forwards traffic. For the observed case, the relevant distinction is The learned routes differ in preference or multipath eligibility, with verification: The selected route exposes multiple valid next hops and a link-loss test preserves access.

C:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, this option proposes: Remove the unintended discard action and install the approved reachable next-hop group. The option describes a different failure mode: A static route sends production traffic into a blackhole after an emergency change. It would address An unintended discard next-hop or blackhole action was selected, but here the case reports All spine-to-leaf BGP sessions exist but one leaf uses a single path instead of ECMP. The current required evidence is: The selected route exposes multiple valid next hops and a link-loss test preserves access.

D:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, this option proposes: Check peer BFD configuration and physical path before adjusting detection policy. That choice would be more relevant when this different symptom occurs: A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. The present scenario instead points to: The learned routes differ in preference or multipath eligibility. The correct resolution has its own verification outcome: The selected route exposes multiple valid next hops and a link-loss test preserves access.

Question 294

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, the data center fabric team observes: All spine-to-leaf BGP sessions exist but one leaf uses a single path instead of ECMP. Which result would establish that the original defect has been corrected?

  1. The IPv6 peer learns the intended network and forwards a controlled IPv6 packet
  2. The selected route exposes multiple valid next hops and a link-loss test preserves access
  3. The remote route resolves to a usable forwarding next hop without fallback leakage
  4. The default route resolves to an active next hop and controlled traffic reaches the gateway

Explanation

Correct Answer

B:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, for Eastfield Energy Services, accept the repair only after this observation: The selected route exposes multiple valid next hops and a link-loss test preserves access. The test distinguishes real recovery from a superficial status change.

Incorrect Answers

A:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, this option proposes: The IPv6 peer learns the intended network and forwards a controlled IPv6 packet. It tests a different symptom: An underlay peer advertises only IPv4 while an expected IPv6 reachability test fails. For the observed case, the relevant distinction is The learned routes differ in preference or multipath eligibility, with verification: The selected route exposes multiple valid next hops and a link-loss test preserves access.

C:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, this option proposes: The remote route resolves to a usable forwarding next hop without fallback leakage. That choice would be more relevant when this different symptom occurs: A neighbor's BGP Established state masks a missing remote gateway next hop. The present scenario instead points to: The learned routes differ in preference or multipath eligibility. The correct resolution has its own verification outcome: The selected route exposes multiple valid next hops and a link-loss test preserves access.

D:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, this option proposes: The default route resolves to an active next hop and controlled traffic reaches the gateway. This is a valid category of fabric maintenance for another scenario (A static default route appears in configuration but never forwards traffic), not the targeted action for Eastfield Energy Services. The distinction is the actual cause: The learned routes differ in preference or multipath eligibility.

Question 295

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, the data center fabric team observes: All spine-to-leaf BGP sessions exist but one leaf uses a single path instead of ECMP. Which root cause fits the reported state?

  1. The fabric edge lacks a route toward the external destination or the return subnet
  2. A prefix match was broader than the approved route-exchange scope
  3. The referenced next-hop group has no reachable selected member
  4. The learned routes differ in preference or multipath eligibility

Explanation

Correct Answer

D:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, the learned routes differ in preference or multipath eligibility. That is the cause of the described failure, and a corrective check should demonstrate: The selected route exposes multiple valid next hops and a link-loss test preserves access.

Incorrect Answers

A:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, this option proposes: The fabric edge lacks a route toward the external destination or the return subnet. The option describes a different failure mode: A new server subnet cannot reach external routed services although its gateway replies. It would address The fabric edge lacks a route toward the external destination or the return subnet, but here the case reports All spine-to-leaf BGP sessions exist but one leaf uses a single path instead of ECMP. The current required evidence is: The selected route exposes multiple valid next hops and a link-loss test preserves access.

B:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, this option proposes: A prefix match was broader than the approved route-exchange scope. That choice would be more relevant when this different symptom occurs: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. The present scenario instead points to: The learned routes differ in preference or multipath eligibility. The correct resolution has its own verification outcome: The selected route exposes multiple valid next hops and a link-loss test preserves access.

C:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, this option proposes: The referenced next-hop group has no reachable selected member. This is a valid category of fabric maintenance for another scenario (A static default route appears in configuration but never forwards traffic), not the targeted action for Eastfield Energy Services. The distinction is the actual cause: The learned routes differ in preference or multipath eligibility.

Question 296

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, the data center fabric team observes: All spine-to-leaf BGP sessions exist but one leaf uses a single path instead of ECMP. Which recurring validation best prevents this failure mode?

  1. Review fast-detection timers against real network jitter and loss
  2. Validate ASN topology and peer definitions when adding leaves
  3. Maintain explicit management-prefix exclusion tests
  4. Measure equal-cost route installation after underlay changes

Explanation

Correct Answer

D:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, use this repeatable control: Measure equal-cost route installation after underlay changes. Its scope is the problem (The learned routes differ in preference or multipath eligibility), not an unrelated network maintenance procedure.

Incorrect Answers

A:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, this option proposes: Review fast-detection timers against real network jitter and loss. That choice would be more relevant when this different symptom occurs: A leaf's BGP session resets repeatedly after a minor interface disturbance. The present scenario instead points to: The learned routes differ in preference or multipath eligibility. The correct resolution has its own verification outcome: The selected route exposes multiple valid next hops and a link-loss test preserves access.

B:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, this option proposes: Validate ASN topology and peer definitions when adding leaves. This is a valid category of fabric maintenance for another scenario (A BGP neighbor remains stuck due to a mismatched local or peer autonomous system), not the targeted action for Eastfield Energy Services. The distinction is the actual cause: The learned routes differ in preference or multipath eligibility.

C:

At Eastfield Energy Services, while validating IPv4 and IPv6 route state, this option proposes: Maintain explicit management-prefix exclusion tests. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The route export policy fails to distinguish infrastructure and tenant prefixes. The evidence in the current case requires a different result: The selected route exposes multiple valid next hops and a link-loss test preserves access.

Question 297

At Northpoint Health Systems, while restoring an underlay BGP adjacency, the data center fabric team observes: Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes. Which targeted adjustment best corrects this behavior?

  1. Check peer BFD configuration and physical path before adjusting detection policy
  2. Restore physical interface health and then review peer and route state
  3. Correct the tagged subinterface binding and validate neighbor-layer connectivity before BGP changes
  4. Review next-hop resolution and use appropriate tracked or dynamic routing for failover

Explanation

Correct Answer

C:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, choose this remediation because it targets the mechanism: The control-plane frames do not reach the intended tagged subinterface. The supported corrective action is: Correct the tagged subinterface binding and validate neighbor-layer connectivity before BGP changes. Verification requires: The appropriate Layer 3 adjacency forms and exchanges required routes.

Incorrect Answers

A:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: Check peer BFD configuration and physical path before adjusting detection policy. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: BFD connectivity or session parameters are incompatible across the peer pair. The evidence in the current case requires a different result: The appropriate Layer 3 adjacency forms and exchanges required routes.

B:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: Restore physical interface health and then review peer and route state. Using that approach would investigate A routing incident is blamed on BGP even though an interface has no operational carrier instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The control-plane frames do not reach the intended tagged subinterface.

D:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: Review next-hop resolution and use appropriate tracked or dynamic routing for failover. This option assumes the other problem (A route remains installed after its intended physical next hop fails) is present. The case instead describes Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes, for which the causal issue is The control-plane frames do not reach the intended tagged subinterface.

Question 298

At Northpoint Health Systems, while restoring an underlay BGP adjacency, the data center fabric team observes: Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes. What observation should be required before this case is closed?

  1. The failed path leaves the forwarding set while a healthy path remains selected
  2. The appropriate Layer 3 adjacency forms and exchanges required routes
  3. The default route resolves to an active next hop and controlled traffic reaches the gateway
  4. An end-to-end test succeeds with routes present in both forward and return directions

Explanation

Correct Answer

B:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, for Northpoint Health Systems, accept the repair only after this observation: The appropriate Layer 3 adjacency forms and exchanges required routes. The test distinguishes real recovery from a superficial status change.

Incorrect Answers

A:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: The failed path leaves the forwarding set while a healthy path remains selected. Using that approach would investigate A route remains installed after its intended physical next hop fails instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The control-plane frames do not reach the intended tagged subinterface.

C:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: The default route resolves to an active next hop and controlled traffic reaches the gateway. This option assumes the other problem (A static default route appears in configuration but never forwards traffic) is present. The case instead describes Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes, for which the causal issue is The control-plane frames do not reach the intended tagged subinterface.

D:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: An end-to-end test succeeds with routes present in both forward and return directions. It tests a different symptom: A new server subnet cannot reach external routed services although its gateway replies. For the observed case, the relevant distinction is The control-plane frames do not reach the intended tagged subinterface, with verification: The appropriate Layer 3 adjacency forms and exchanges required routes.

Question 299

At Northpoint Health Systems, while restoring an underlay BGP adjacency, the data center fabric team observes: Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes. What causal finding should the investigation prioritize?

  1. The fabric edge lacks a route toward the external destination or the return subnet
  2. The control-plane frames do not reach the intended tagged subinterface
  3. Troubleshooting began at the protocol layer without validating lower-layer status
  4. An unintended discard next-hop or blackhole action was selected

Explanation

Correct Answer

B:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, the specific mechanism is: The control-plane frames do not reach the intended tagged subinterface. It explains the reported state: Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes. The targeted corrective action is: Correct the tagged subinterface binding and validate neighbor-layer connectivity before BGP changes.

Incorrect Answers

A:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: The fabric edge lacks a route toward the external destination or the return subnet. The alternative focuses on The fabric edge lacks a route toward the external destination or the return subnet, not on the stated defect. For this scenario the expected acceptance result would be: The appropriate Layer 3 adjacency forms and exchanges required routes.

C:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: Troubleshooting began at the protocol layer without validating lower-layer status. It tests a different symptom: A routing incident is blamed on BGP even though an interface has no operational carrier. For the observed case, the relevant distinction is The control-plane frames do not reach the intended tagged subinterface, with verification: The appropriate Layer 3 adjacency forms and exchanges required routes.

D:

An unintended discard next-hop or blackhole action was selected, but here the case reports Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes. Here, the control-plane frames do not reach the intended tagged subinterface.

Question 300

At Northpoint Health Systems, while restoring an underlay BGP adjacency, the data center fabric team observes: Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes. What ongoing operational safeguard directly addresses this root issue?

  1. Validate symmetric reachability across fabric-to-external boundaries
  2. Use positive and negative prefix fixtures when revising route policy
  3. Check encapsulation and interface state before route-policy adjustments
  4. Maintain explicit management-prefix exclusion tests

Explanation

Correct Answer

C:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, for Northpoint Health Systems, include the safeguard: Check encapsulation and interface state before route-policy adjustments. It reduces repeat risk from the original mechanism and complements a validation of: The appropriate Layer 3 adjacency forms and exchanges required routes.

Incorrect Answers

A:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: Validate symmetric reachability across fabric-to-external boundaries. This option assumes the other problem (A new server subnet cannot reach external routed services although its gateway replies) is present. The case instead describes Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes, for which the causal issue is The control-plane frames do not reach the intended tagged subinterface.

B:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: Use positive and negative prefix fixtures when revising route policy. It tests a different symptom: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. For the observed case, the relevant distinction is The control-plane frames do not reach the intended tagged subinterface, with verification: The appropriate Layer 3 adjacency forms and exchanges required routes.

D:

At Northpoint Health Systems, while restoring an underlay BGP adjacency, this option proposes: Maintain explicit management-prefix exclusion tests. That choice would be more relevant when this different symptom occurs: A leaf exports its connected management subnet into tenant-visible fabric routing. The present scenario instead points to: The control-plane frames do not reach the intended tagged subinterface. The correct resolution has its own verification outcome: The appropriate Layer 3 adjacency forms and exchanges required routes.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests