McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 29

Question 280

At Pinebrook Health Systems, while commissioning a routed spine uplink, the data center fabric team observes: Two fabric peers have BGP configured but the session stays Idle with no TCP connection. Which recurring validation best prevents this failure mode?

  1. Monitor unresolved next hops separately from BGP state
  2. Maintain explicit management-prefix exclusion tests
  3. Include peer transport checks before tuning route policies
  4. Use positive and negative prefix fixtures when revising route policy

Explanation

Correct Answer

C:

At Pinebrook Health Systems, while commissioning a routed spine uplink, for Pinebrook Health Systems, include the safeguard: Include peer transport checks before tuning route policies. It reduces repeat risk from the original mechanism and complements a validation of: The BGP TCP session establishes and the peer reaches the expected state.

Incorrect Answers

A:

At Pinebrook Health Systems, while commissioning a routed spine uplink, this option proposes: Monitor unresolved next hops separately from BGP state. The alternative focuses on The received route's next hop cannot be resolved in the relevant routing instance, not on the stated defect. For this scenario the expected acceptance result would be: The BGP TCP session establishes and the peer reaches the expected state.

B:

At Pinebrook Health Systems, while commissioning a routed spine uplink, this option proposes: Maintain explicit management-prefix exclusion tests. This option assumes the other problem (A leaf exports its connected management subnet into tenant-visible fabric routing) is present. The case instead describes Two fabric peers have BGP configured but the session stays Idle with no TCP connection, for which the causal issue is The peer address is unreachable or TCP 179 is blocked by the underlay policy.

D:

At Pinebrook Health Systems, while commissioning a routed spine uplink, this option proposes: Use positive and negative prefix fixtures when revising route policy. The option describes a different failure mode: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. It would address A prefix match was broader than the approved route-exchange scope, but here the case reports Two fabric peers have BGP configured but the session stays Idle with no TCP connection. The current required evidence is: The BGP TCP session establishes and the peer reaches the expected state.

Question 281

At Cedarview Energy Services, while planning a link-failure test, the data center fabric team observes: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. Which targeted adjustment best corrects this behavior?

  1. Correct the tagged subinterface binding and validate neighbor-layer connectivity before BGP changes
  2. Restrict the route policy to explicitly approved loopback or underlay prefixes
  3. Verify peer addressing, routing and permitted control-plane connectivity
  4. Correct the next-hop-group membership and adjacency reachability

Explanation

Correct Answer

B:

At Cedarview Energy Services, while planning a link-failure test, for Cedarview Energy Services, the applicable change is: Restrict the route policy to explicitly approved loopback or underlay prefixes. The causal issue is: A prefix match was broader than the approved route-exchange scope. A successful validation would show: A policy test exports required fabric routes but denies representative tenant prefixes.

Incorrect Answers

A:

At Cedarview Energy Services, while planning a link-failure test, this option proposes: Correct the tagged subinterface binding and validate neighbor-layer connectivity before BGP changes. It tests a different symptom: Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes. For the observed case, the relevant distinction is A prefix match was broader than the approved route-exchange scope, with verification: A policy test exports required fabric routes but denies representative tenant prefixes.

C:

Two fabric peers have BGP configured but the session stays Idle with no TCP connection. Here, a prefix match was broader than the approved route-exchange scope.

D:

At Cedarview Energy Services, while planning a link-failure test, this option proposes: Correct the next-hop-group membership and adjacency reachability. This is a valid category of fabric maintenance for another scenario (A static default route appears in configuration but never forwards traffic), not the targeted action for Cedarview Energy Services. The distinction is the actual cause: A prefix match was broader than the approved route-exchange scope.

Question 282

At Cedarview Energy Services, while planning a link-failure test, the data center fabric team observes: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. What observation should be required before this case is closed?

  1. A policy test exports required fabric routes but denies representative tenant prefixes
  2. The session stays stable during acceptable variations and detects actual link failure within objective
  3. The interface is up and its expected control-plane session establishes
  4. The forwarding table matches the approved spine preference and still has required backup paths

Explanation

Correct Answer

A:

At Cedarview Energy Services, while planning a link-failure test, this result is the relevant closure evidence: A policy test exports required fabric routes but denies representative tenant prefixes. It checks the effect of: Restrict the route policy to explicitly approved loopback or underlay prefixes. The underlying issue was: A prefix match was broader than the approved route-exchange scope.

Incorrect Answers

B:

At Cedarview Energy Services, while planning a link-failure test, this option proposes: The session stays stable during acceptable variations and detects actual link failure within objective. That choice would be more relevant when this different symptom occurs: A leaf's BGP session resets repeatedly after a minor interface disturbance. The present scenario instead points to: A prefix match was broader than the approved route-exchange scope. The correct resolution has its own verification outcome: A policy test exports required fabric routes but denies representative tenant prefixes.

C:

At Cedarview Energy Services, while planning a link-failure test, this option proposes: The interface is up and its expected control-plane session establishes. This is a valid category of fabric maintenance for another scenario (A routing incident is blamed on BGP even though an interface has no operational carrier), not the targeted action for Cedarview Energy Services. The distinction is the actual cause: A prefix match was broader than the approved route-exchange scope.

D:

At Cedarview Energy Services, while planning a link-failure test, this option proposes: The forwarding table matches the approved spine preference and still has required backup paths. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The path preference or BGP route attributes changed without validating selected forwarding paths. The evidence in the current case requires a different result: A policy test exports required fabric routes but denies representative tenant prefixes.

Question 283

At Cedarview Energy Services, while planning a link-failure test, the data center fabric team observes: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. What causal finding should the investigation prioritize?

  1. A prefix match was broader than the approved route-exchange scope
  2. BFD connectivity or session parameters are incompatible across the peer pair
  3. The BGP or static route belongs to an incorrect network instance
  4. The path preference or BGP route attributes changed without validating selected forwarding paths

Explanation

Correct Answer

A:

At Cedarview Energy Services, while planning a link-failure test, for Cedarview Energy Services, investigate this cause first: A prefix match was broader than the approved route-exchange scope. It is directly linked to the observed symptom rather than another service issue.

Incorrect Answers

B:

At Cedarview Energy Services, while planning a link-failure test, this option proposes: BFD connectivity or session parameters are incompatible across the peer pair. This is a valid category of fabric maintenance for another scenario (A BFD session shows Down while the BGP peer continues waiting for its normal hold timer), not the targeted action for Cedarview Energy Services. The distinction is the actual cause: A prefix match was broader than the approved route-exchange scope.

C:

At Cedarview Energy Services, while planning a link-failure test, this option proposes: The BGP or static route belongs to an incorrect network instance. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The BGP or static route belongs to an incorrect network instance. The evidence in the current case requires a different result: A policy test exports required fabric routes but denies representative tenant prefixes.

D:

At Cedarview Energy Services, while planning a link-failure test, this option proposes: The path preference or BGP route attributes changed without validating selected forwarding paths. Using that approach would investigate Traffic follows an unexpected spine after a route-policy update instead. No evidence for that separate failure is supplied here; the reported case is consistent with: A prefix match was broader than the approved route-exchange scope.

Question 284

At Cedarview Energy Services, while planning a link-failure test, the data center fabric team observes: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. What ongoing operational safeguard directly addresses this root issue?

  1. Check data-plane path programming whenever peer counts change
  2. Monitor next-hop resolution, not merely static-route configuration presence
  3. Use positive and negative prefix fixtures when revising route policy
  4. Validate symmetric reachability across fabric-to-external boundaries

Explanation

Correct Answer

C:

At Cedarview Energy Services, while planning a link-failure test, for Cedarview Energy Services, include the safeguard: Use positive and negative prefix fixtures when revising route policy. It reduces repeat risk from the original mechanism and complements a validation of: A policy test exports required fabric routes but denies representative tenant prefixes.

Incorrect Answers

A:

At Cedarview Energy Services, while planning a link-failure test, this option proposes: Check data-plane path programming whenever peer counts change. This is a valid category of fabric maintenance for another scenario (A network engineer assumes multiple BGP peers automatically imply load-balanced traffic), not the targeted action for Cedarview Energy Services. The distinction is the actual cause: A prefix match was broader than the approved route-exchange scope.

B:

At Cedarview Energy Services, while planning a link-failure test, this option proposes: Monitor next-hop resolution, not merely static-route configuration presence. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The referenced next-hop group has no reachable selected member. The evidence in the current case requires a different result: A policy test exports required fabric routes but denies representative tenant prefixes.

D:

At Cedarview Energy Services, while planning a link-failure test, this option proposes: Validate symmetric reachability across fabric-to-external boundaries. The alternative focuses on The fabric edge lacks a route toward the external destination or the return subnet, not on the stated defect. For this scenario the expected acceptance result would be: A policy test exports required fabric routes but denies representative tenant prefixes.

Question 285

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, the data center fabric team observes: A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. Which supported remediation most directly addresses the stated failure?

  1. Restrict the route policy to explicitly approved loopback or underlay prefixes
  2. Commit and verify persistent underlay routing configuration prior to controlled reboot
  3. Restrict route origination and export to the required network-service prefixes
  4. Check peer BFD configuration and physical path before adjusting detection policy

Explanation

Correct Answer

D:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, the targeted correction is: Check peer BFD configuration and physical path before adjusting detection policy. The reported symptom is explained by: BFD connectivity or session parameters are incompatible across the peer pair. Confirm the change by testing this outcome: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

Incorrect Answers

A:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, this option proposes: Restrict the route policy to explicitly approved loopback or underlay prefixes. Using that approach would investigate A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes instead. No evidence for that separate failure is supplied here; the reported case is consistent with: BFD connectivity or session parameters are incompatible across the peer pair.

B:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, this option proposes: Commit and verify persistent underlay routing configuration prior to controlled reboot. The alternative focuses on The required routing configuration existed only in uncommitted candidate state, not on the stated defect. For this scenario the expected acceptance result would be: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

C:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, this option proposes: Restrict route origination and export to the required network-service prefixes. This option assumes the other problem (A leaf exports its connected management subnet into tenant-visible fabric routing) is present. The case instead describes A BFD session shows Down while the BGP peer continues waiting for its normal hold timer, for which the causal issue is BFD connectivity or session parameters are incompatible across the peer pair.

Question 286

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, the data center fabric team observes: A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. Which evidence directly validates the intended repair?

  1. The forwarding state lists the intended next-hop set for the test destination
  2. The approved route enters the intended route table without leaking unwanted prefixes
  3. The remote route resolves to a usable forwarding next hop without fallback leakage
  4. BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction

Explanation

Correct Answer

D:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, bFD establishes and a controlled path failure triggers the intended rapid adjacency reaction. This is linked directly to the observed symptom (A BFD session shows Down while the BGP peer continues waiting for its normal hold timer) and cannot be replaced by an unrelated healthy dashboard.

Incorrect Answers

A:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, this option proposes: The forwarding state lists the intended next-hop set for the test destination. The alternative focuses on The active forwarding table has only one selected path despite several control-plane peers, not on the stated defect. For this scenario the expected acceptance result would be: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

B:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, this option proposes: The approved route enters the intended route table without leaking unwanted prefixes. This option assumes the other problem (A leaf receives an underlay route but it is rejected from the active routing table) is present. The case instead describes A BFD session shows Down while the BGP peer continues waiting for its normal hold timer, for which the causal issue is BFD connectivity or session parameters are incompatible across the peer pair.

C:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, this option proposes: The remote route resolves to a usable forwarding next hop without fallback leakage. It tests a different symptom: A neighbor's BGP Established state masks a missing remote gateway next hop. For the observed case, the relevant distinction is BFD connectivity or session parameters are incompatible across the peer pair, with verification: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

Question 287

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, the data center fabric team observes: A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. Which underlying mechanism best accounts for this symptom?

  1. The control-plane frames do not reach the intended tagged subinterface
  2. An unintended discard next-hop or blackhole action was selected
  3. An import policy or preference calculation rejects the proposed route
  4. BFD connectivity or session parameters are incompatible across the peer pair

Explanation

Correct Answer

D:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, bFD connectivity or session parameters are incompatible across the peer pair. That is the cause of the described failure, and a corrective check should demonstrate: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

Incorrect Answers

A:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, this option proposes: The control-plane frames do not reach the intended tagged subinterface. This option assumes the other problem (Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes) is present. The case instead describes A BFD session shows Down while the BGP peer continues waiting for its normal hold timer, for which the causal issue is BFD connectivity or session parameters are incompatible across the peer pair.

B:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, this option proposes: An unintended discard next-hop or blackhole action was selected. It tests a different symptom: A static route sends production traffic into a blackhole after an emergency change. For the observed case, the relevant distinction is BFD connectivity or session parameters are incompatible across the peer pair, with verification: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

C:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, this option proposes: An import policy or preference calculation rejects the proposed route. The option describes a different failure mode: A leaf receives an underlay route but it is rejected from the active routing table. It would address An import policy or preference calculation rejects the proposed route, but here the case reports A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. The current required evidence is: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

Question 288

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, the data center fabric team observes: A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. Which review gate should be added to prevent the same error?

  1. Validate symmetric reachability across fabric-to-external boundaries
  2. Monitor next-hop resolution, not merely static-route configuration presence
  3. Test BFD and BGP failure handling together in maintenance drills
  4. Maintain explicit management-prefix exclusion tests

Explanation

Correct Answer

C:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, for Cedarview Municipal Networks, include the safeguard: Test BFD and BGP failure handling together in maintenance drills. It reduces repeat risk from the original mechanism and complements a validation of: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

Incorrect Answers

A:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, this option proposes: Validate symmetric reachability across fabric-to-external boundaries. It tests a different symptom: A new server subnet cannot reach external routed services although its gateway replies. For the observed case, the relevant distinction is BFD connectivity or session parameters are incompatible across the peer pair, with verification: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

B:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, this option proposes: Monitor next-hop resolution, not merely static-route configuration presence. The option describes a different failure mode: A static default route appears in configuration but never forwards traffic. It would address The referenced next-hop group has no reachable selected member, but here the case reports A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. The current required evidence is: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

D:

At Cedarview Municipal Networks, while validating IPv4 and IPv6 route state, this option proposes: Maintain explicit management-prefix exclusion tests. This is a valid category of fabric maintenance for another scenario (A leaf exports its connected management subnet into tenant-visible fabric routing), not the targeted action for Cedarview Municipal Networks. The distinction is the actual cause: BFD connectivity or session parameters are incompatible across the peer pair.

Question 289

At Stonegate Energy Services, while verifying multiple equal-cost paths, the data center fabric team observes: An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit. What configuration or operational change should the engineer prioritize?

  1. Commit and verify persistent underlay routing configuration prior to controlled reboot
  2. Review next-hop resolution and use appropriate tracked or dynamic routing for failover
  3. Provide appropriate next-hop reachability or correct the permitted next-hop treatment
  4. Check peer BFD configuration and physical path before adjusting detection policy

Explanation

Correct Answer

A:

At Stonegate Energy Services, while verifying multiple equal-cost paths, commit and verify persistent underlay routing configuration prior to controlled reboot. This addresses the specific failure mechanism (The required routing configuration existed only in uncommitted candidate state) rather than treating only the visible alarm. The required acceptance evidence is: The route and BGP state return automatically after restart under approved config.

Incorrect Answers

B:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: Review next-hop resolution and use appropriate tracked or dynamic routing for failover. This is a valid category of fabric maintenance for another scenario (A route remains installed after its intended physical next hop fails), not the targeted action for Stonegate Energy Services. The distinction is the actual cause: The required routing configuration existed only in uncommitted candidate state.

C:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: Provide appropriate next-hop reachability or correct the permitted next-hop treatment. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The received route's next hop cannot be resolved in the relevant routing instance. The evidence in the current case requires a different result: The route and BGP state return automatically after restart under approved config.

D:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: Check peer BFD configuration and physical path before adjusting detection policy. Using that approach would investigate A BFD session shows Down while the BGP peer continues waiting for its normal hold timer instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The required routing configuration existed only in uncommitted candidate state.

Question 290

At Stonegate Energy Services, while verifying multiple equal-cost paths, the data center fabric team observes: An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit. What test result proves the affected fabric function now works?

  1. The route and BGP state return automatically after restart under approved config
  2. The remote peer sees the expected source and the session reaches Established
  3. Both peers reach Established using the approved AS assignment
  4. The test destination is reached while the blackhole action is absent from the route

Explanation

Correct Answer

A:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this result is the relevant closure evidence: The route and BGP state return automatically after restart under approved config. It checks the effect of: Commit and verify persistent underlay routing configuration prior to controlled reboot. The underlying issue was: The required routing configuration existed only in uncommitted candidate state.

Incorrect Answers

B:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: The remote peer sees the expected source and the session reaches Established. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The session's source address does not match the remote peer definition and route reachability. The evidence in the current case requires a different result: The route and BGP state return automatically after restart under approved config.

C:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: Both peers reach Established using the approved AS assignment. Using that approach would investigate A BGP neighbor remains stuck due to a mismatched local or peer autonomous system instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The required routing configuration existed only in uncommitted candidate state.

D:

At Stonegate Energy Services, while verifying multiple equal-cost paths, this option proposes: The test destination is reached while the blackhole action is absent from the route. The alternative focuses on An unintended discard next-hop or blackhole action was selected, not on the stated defect. For this scenario the expected acceptance result would be: The route and BGP state return automatically after restart under approved config.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests