McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 15

Question 140

At Riverbend Rail Logistics, while reviewing interface counters, the data center fabric team observes: A CLI command displays a long output and the engineer misses the failed interface line. What ongoing operational safeguard directly addresses this root issue?

  1. Check interface admin state during turn-up acceptance
  2. Require both instance creation and attachment evidence during deployment
  3. Record candidate versus running datastore state in every change ticket
  4. Standardize filtered state queries for repeated fabric diagnostics

Explanation

Correct Answer

D:

At Riverbend Rail Logistics, while reviewing interface counters, use this repeatable control: Standardize filtered state queries for repeated fabric diagnostics. Its scope is the problem (The diagnostic session lacks filtering or structured output for the relevant field), not an unrelated network maintenance procedure.

Incorrect Answers

A:

At Riverbend Rail Logistics, while reviewing interface counters, this option proposes: Check interface admin state during turn-up acceptance. This option assumes the other problem (A new network interface is administratively disabled although optics and cabling are healthy) is present. The case instead describes A CLI command displays a long output and the engineer misses the failed interface line, for which the causal issue is The diagnostic session lacks filtering or structured output for the relevant field.

B:

At Riverbend Rail Logistics, while reviewing interface counters, this option proposes: Require both instance creation and attachment evidence during deployment. It tests a different symptom: A configured network instance is present but has no usable attached interfaces. For the observed case, the relevant distinction is The diagnostic session lacks filtering or structured output for the relevant field, with verification: The structured query returns the target interface and its actual operational status without truncation.

C:

At Riverbend Rail Logistics, while reviewing interface counters, this option proposes: Record candidate versus running datastore state in every change ticket. The option describes a different failure mode: An operator edits SR Linux candidate configuration but sees no change in live forwarding. It would address The configuration was staged in a candidate datastore without a committed activation, but here the case reports A CLI command displays a long output and the engineer misses the failed interface line. The current required evidence is: The structured query returns the target interface and its actual operational status without truncation.

Question 141

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, the data center fabric team observes: An interface statistics report aggregates multiple subinterfaces and hides the affected VLAN. Which supported remediation most directly addresses the stated failure?

  1. Inspect the IPv4 route table in the correct IP-VRF context
  2. Use aliases for supported operational shortcuts and apply persistent changes through candidate configuration
  3. Collect supported counters for the specific logical interface and correlate with parent link statistics
  4. Use a narrower filter and inspect the complete model subtree required for the diagnosis

Explanation

Correct Answer

C:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, choose this remediation because it targets the mechanism: The monitoring system measures only parent port counters when per-subinterface visibility is needed. The supported corrective action is: Collect supported counters for the specific logical interface and correlate with parent link statistics. Verification requires: Only the affected subinterface shows the relevant error or traffic delta.

Incorrect Answers

A:

The diagnostic omits the selected network instance during route lookup, but here the case reports An interface statistics report aggregates multiple subinterfaces and hides the affected VLAN. Here, the monitoring system measures only parent port counters when per-subinterface visibility is needed.

B:

An engineer expects a CLI alias to change the persistent device configuration. Here, the monitoring system measures only parent port counters when per-subinterface visibility is needed.

D:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, this option proposes: Use a narrower filter and inspect the complete model subtree required for the diagnosis. Although related to SR Linux CLI, model configuration and interfaces, the proposed change fits another mechanism: A broad CLI match filter excludes dependent configuration or state fields. The evidence in the current case requires a different result: Only the affected subinterface shows the relevant error or traffic delta.

Question 142

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, the data center fabric team observes: An interface statistics report aggregates multiple subinterfaces and hides the affected VLAN. Which evidence directly validates the intended repair?

  1. Only the affected subinterface shows the relevant error or traffic delta
  2. The intended leaf setting appears under the correct model and passes a controlled commit
  3. A rehearsal restores the known-good state if the change acceptance test fails
  4. The structured query returns the target interface and its actual operational status without truncation

Explanation

Correct Answer

A:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, this result is the relevant closure evidence: Only the affected subinterface shows the relevant error or traffic delta. It checks the effect of: Collect supported counters for the specific logical interface and correlate with parent link statistics. The underlying issue was: The monitoring system measures only parent port counters when per-subinterface visibility is needed.

Incorrect Answers

B:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, this option proposes: The intended leaf setting appears under the correct model and passes a controlled commit. This is a valid category of fabric maintenance for another scenario (A junior operator tries to use a command copied from a different network operating system), not the targeted action for Bluehaven Municipal Networks. The distinction is the actual cause: The monitoring system measures only parent port counters when per-subinterface visibility is needed.

C:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, this option proposes: A rehearsal restores the known-good state if the change acceptance test fails. Although related to SR Linux CLI, model configuration and interfaces, the proposed change fits another mechanism: The change procedure omitted configuration checkpoints and rollback criteria. The evidence in the current case requires a different result: Only the affected subinterface shows the relevant error or traffic delta.

D:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, this option proposes: The structured query returns the target interface and its actual operational status without truncation. Using that approach would investigate A CLI command displays a long output and the engineer misses the failed interface line instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The monitoring system measures only parent port counters when per-subinterface visibility is needed.

Question 143

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, the data center fabric team observes: An interface statistics report aggregates multiple subinterfaces and hides the affected VLAN. Which underlying mechanism best accounts for this symptom?

  1. The change process lacks candidate-change coordination and effective-diff review
  2. The endpoint is reachable through unstable Layer 2 paths or has been incorrectly dual-attached
  3. The monitoring system measures only parent port counters when per-subinterface visibility is needed
  4. The integration assumes display column positions are a stable machine-readable interface

Explanation

Correct Answer

C:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, the evidence points to: The monitoring system measures only parent port counters when per-subinterface visibility is needed. The follow-up test (Only the affected subinterface shows the relevant error or traffic delta) distinguishes this mechanism from a separate fabric fault.

Incorrect Answers

A:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, this option proposes: The change process lacks candidate-change coordination and effective-diff review. This is a valid category of fabric maintenance for another scenario (Two administrators apply incompatible pending edits to the same SR Linux device), not the targeted action for Bluehaven Municipal Networks. The distinction is the actual cause: The monitoring system measures only parent port counters when per-subinterface visibility is needed.

B:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, this option proposes: The endpoint is reachable through unstable Layer 2 paths or has been incorrectly dual-attached. Although related to SR Linux CLI, model configuration and interfaces, the proposed change fits another mechanism: The endpoint is reachable through unstable Layer 2 paths or has been incorrectly dual-attached. The evidence in the current case requires a different result: Only the affected subinterface shows the relevant error or traffic delta.

D:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, this option proposes: The integration assumes display column positions are a stable machine-readable interface. The alternative focuses on The integration assumes display column positions are a stable machine-readable interface, not on the stated defect. For this scenario the expected acceptance result would be: Only the affected subinterface shows the relevant error or traffic delta.

Question 144

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, the data center fabric team observes: An interface statistics report aggregates multiple subinterfaces and hides the affected VLAN. Which review gate should be added to prevent the same error?

  1. Prefer schema-backed data for automated state collection
  2. Maintain both physical and logical interface visibility in fabric monitoring
  3. Include network-instance binding in interface peer reviews
  4. Alert on abnormal MAC-move events while reviewing multi-homing designs

Explanation

Correct Answer

B:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, maintain both physical and logical interface visibility in fabric monitoring. This ongoing review specifically addresses: The monitoring system measures only parent port counters when per-subinterface visibility is needed. It should remain part of change acceptance, not only incident closure.

Incorrect Answers

A:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, this option proposes: Prefer schema-backed data for automated state collection. Although related to SR Linux CLI, model configuration and interfaces, the proposed change fits another mechanism: The integration assumes display column positions are a stable machine-readable interface. The evidence in the current case requires a different result: Only the affected subinterface shows the relevant error or traffic delta.

C:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, this option proposes: Include network-instance binding in interface peer reviews. The alternative focuses on The interface-to-network-instance binding does not follow the tenancy design, not on the stated defect. For this scenario the expected acceptance result would be: Only the affected subinterface shows the relevant error or traffic delta.

D:

At Bluehaven Municipal Networks, while auditing the model-driven CLI hierarchy, this option proposes: Alert on abnormal MAC-move events while reviewing multi-homing designs. This option assumes the other problem (A device reports repeated MAC moves between two attachment points during a suspected Layer 2 loop) is present. The case instead describes An interface statistics report aggregates multiple subinterfaces and hides the affected VLAN, for which the causal issue is The monitoring system measures only parent port counters when per-subinterface visibility is needed.

Question 145

At Summitline Municipal Networks, while reviewing interface counters, the data center fabric team observes: A configuration automation script breaks after parsing human-formatted CLI tables. What configuration or operational change should the engineer prioritize?

  1. Use the supported model-driven JSON output or management API with named fields
  2. Bind the approved interface to the intended IP-VRF and check the resulting routes
  3. Investigate attachment topology and apply supported MAC-move controls without globally suppressing learning
  4. Correct the interface hierarchy and apply the intended Layer 3 address to the approved subinterface

Explanation

Correct Answer

A:

At Summitline Municipal Networks, while reviewing interface counters, use the supported model-driven JSON output or management API with named fields. This addresses the specific failure mechanism (The integration assumes display column positions are a stable machine-readable interface) rather than treating only the visible alarm. The required acceptance evidence is: The parser reads the required values after output formatting changes without field misalignment.

Incorrect Answers

B:

At Summitline Municipal Networks, while reviewing interface counters, this option proposes: Bind the approved interface to the intended IP-VRF and check the resulting routes. This option assumes the other problem (An engineer places an IP interface in a default network instance instead of the assigned tenant VRF) is present. The case instead describes A configuration automation script breaks after parsing human-formatted CLI tables, for which the causal issue is The integration assumes display column positions are a stable machine-readable interface.

C:

At Summitline Municipal Networks, while reviewing interface counters, this option proposes: Investigate attachment topology and apply supported MAC-move controls without globally suppressing learning. It tests a different symptom: A device reports repeated MAC moves between two attachment points during a suspected Layer 2 loop. For the observed case, the relevant distinction is The integration assumes display column positions are a stable machine-readable interface, with verification: The parser reads the required values after output formatting changes without field misalignment.

D:

At Summitline Municipal Networks, while reviewing interface counters, this option proposes: Correct the interface hierarchy and apply the intended Layer 3 address to the approved subinterface. The option describes a different failure mode: A routed port is configured with an IP address under an unexpected subinterface context. It would address The IP addressing change was attached to the wrong interface or subinterface scope, but here the case reports A configuration automation script breaks after parsing human-formatted CLI tables. The current required evidence is: The parser reads the required values after output formatting changes without field misalignment.

Question 146

At Summitline Municipal Networks, while reviewing interface counters, the data center fabric team observes: A configuration automation script breaks after parsing human-formatted CLI tables. What test result proves the affected fabric function now works?

  1. The parser reads the required values after output formatting changes without field misalignment
  2. The tenant service remains active on its intended replacement attachment
  3. A rehearsal restores the known-good state if the change acceptance test fails
  4. The intended port displays the approved description and the neighbor mapping is correct

Explanation

Correct Answer

A:

At Summitline Municipal Networks, while reviewing interface counters, this result is the relevant closure evidence: The parser reads the required values after output formatting changes without field misalignment. It checks the effect of: Use the supported model-driven JSON output or management API with named fields. The underlying issue was: The integration assumes display column positions are a stable machine-readable interface.

Incorrect Answers

B:

At Summitline Municipal Networks, while reviewing interface counters, this option proposes: The tenant service remains active on its intended replacement attachment. It tests a different symptom: An operator deletes an SR Linux subinterface that still carries an active tenant service. For the observed case, the relevant distinction is The integration assumes display column positions are a stable machine-readable interface, with verification: The parser reads the required values after output formatting changes without field misalignment.

C:

At Summitline Municipal Networks, while reviewing interface counters, this option proposes: A rehearsal restores the known-good state if the change acceptance test fails. The option describes a different failure mode: An engineer makes a risky multi-node edit without saving a known-good baseline. It would address The change procedure omitted configuration checkpoints and rollback criteria, but here the case reports A configuration automation script breaks after parsing human-formatted CLI tables. The current required evidence is: The parser reads the required values after output formatting changes without field misalignment.

D:

At Summitline Municipal Networks, while reviewing interface counters, this option proposes: The intended port displays the approved description and the neighbor mapping is correct. That choice would be more relevant when this different symptom occurs: A fabric team applies a new interface description to the wrong port after a chassis replacement. The present scenario instead points to: The integration assumes display column positions are a stable machine-readable interface. The correct resolution has its own verification outcome: The parser reads the required values after output formatting changes without field misalignment.

Question 147

At Summitline Municipal Networks, while reviewing interface counters, the data center fabric team observes: A configuration automation script breaks after parsing human-formatted CLI tables. What specific misconfiguration or design error is most likely?

  1. The integration assumes display column positions are a stable machine-readable interface
  2. The IP addressing change was attached to the wrong interface or subinterface scope
  3. The change procedure omitted configuration checkpoints and rollback criteria
  4. The transceiver type or physical settings do not match the approved platform and link capabilities

Explanation

Correct Answer

A:

At Summitline Municipal Networks, while reviewing interface counters, for Summitline Municipal Networks, investigate this cause first: The integration assumes display column positions are a stable machine-readable interface. It is directly linked to the observed symptom rather than another service issue.

Incorrect Answers

B:

At Summitline Municipal Networks, while reviewing interface counters, this option proposes: The IP addressing change was attached to the wrong interface or subinterface scope. The option describes a different failure mode: A routed port is configured with an IP address under an unexpected subinterface context. It would address The IP addressing change was attached to the wrong interface or subinterface scope, but here the case reports A configuration automation script breaks after parsing human-formatted CLI tables. The current required evidence is: The parser reads the required values after output formatting changes without field misalignment.

C:

At Summitline Municipal Networks, while reviewing interface counters, this option proposes: The change procedure omitted configuration checkpoints and rollback criteria. That choice would be more relevant when this different symptom occurs: An engineer makes a risky multi-node edit without saving a known-good baseline. The present scenario instead points to: The integration assumes display column positions are a stable machine-readable interface. The correct resolution has its own verification outcome: The parser reads the required values after output formatting changes without field misalignment.

D:

At Summitline Municipal Networks, while reviewing interface counters, this option proposes: The transceiver type or physical settings do not match the approved platform and link capabilities. This is a valid category of fabric maintenance for another scenario (A 100G uplink remains down after an optics swap despite a valid peer port), not the targeted action for Summitline Municipal Networks. The distinction is the actual cause: The integration assumes display column positions are a stable machine-readable interface.

Question 148

At Summitline Municipal Networks, while reviewing interface counters, the data center fabric team observes: A configuration automation script breaks after parsing human-formatted CLI tables. What repeatable acceptance check would reduce recurrence?

  1. Include routing-instance names in troubleshooting artifacts
  2. Prefer schema-backed data for automated state collection
  3. Review physical error counters in underlay adjacency investigations
  4. Test both default and explicit VLAN classification after port changes

Explanation

Correct Answer

B:

At Summitline Municipal Networks, while reviewing interface counters, prefer schema-backed data for automated state collection. This ongoing review specifically addresses: The integration assumes display column positions are a stable machine-readable interface. It should remain part of change acceptance, not only incident closure.

Incorrect Answers

A:

At Summitline Municipal Networks, while reviewing interface counters, this option proposes: Include routing-instance names in troubleshooting artifacts. The option describes a different failure mode: An operator inspects an IPv4 route in a tenant instance but checks the default IPv4 table. It would address The diagnostic omits the selected network instance during route lookup, but here the case reports A configuration automation script breaks after parsing human-formatted CLI tables. The current required evidence is: The parser reads the required values after output formatting changes without field misalignment.

C:

At Summitline Municipal Networks, while reviewing interface counters, this option proposes: Review physical error counters in underlay adjacency investigations. This is a valid category of fabric maintenance for another scenario (A high-speed interface shows rapidly increasing errors while routing sessions still intermittently recover), not the targeted action for Summitline Municipal Networks. The distinction is the actual cause: The integration assumes display column positions are a stable machine-readable interface.

D:

At Summitline Municipal Networks, while reviewing interface counters, this option proposes: Test both default and explicit VLAN classification after port changes. Although related to SR Linux CLI, model configuration and interfaces, the proposed change fits another mechanism: The subinterface classification is configured for the wrong tagged or untagged traffic type. The evidence in the current case requires a different result: The parser reads the required values after output formatting changes without field misalignment.

Question 149

At Oakline Digital Commerce, while checking a network-instance assignment, the data center fabric team observes: A service has healthy IPv4 reachability but its IPv6 traffic fails due to missing local addressing. Which action resolves the identified fabric-management issue?

  1. Investigate attachment topology and apply supported MAC-move controls without globally suppressing learning
  2. Validate the installed port inventory and update the configuration target to the actual new interface
  3. Check IPv6 addressing and table state separately from IPv4 and complete the missing configuration
  4. Inspect interface error counters, signal diagnostics and peer physical settings before tuning routing

Explanation

Correct Answer

C:

At Oakline Digital Commerce, while checking a network-instance assignment, choose this remediation because it targets the mechanism: The subinterface or IP-VRF lacks the intended IPv6 address or route information. The supported corrective action is: Check IPv6 addressing and table state separately from IPv4 and complete the missing configuration. Verification requires: A controlled IPv6 path succeeds through the correct network instance.

Incorrect Answers

A:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: Investigate attachment topology and apply supported MAC-move controls without globally suppressing learning. This is a valid category of fabric maintenance for another scenario (A device reports repeated MAC moves between two attachment points during a suspected Layer 2 loop), not the targeted action for Oakline Digital Commerce. The distinction is the actual cause: The subinterface or IP-VRF lacks the intended IPv6 address or route information.

B:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: Validate the installed port inventory and update the configuration target to the actual new interface. Although related to SR Linux CLI, model configuration and interfaces, the proposed change fits another mechanism: The old physical port mapping was reused without reconciling current interface identifiers. The evidence in the current case requires a different result: A controlled IPv6 path succeeds through the correct network instance.

D:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: Inspect interface error counters, signal diagnostics and peer physical settings before tuning routing. The alternative focuses on The fault is in the physical link or transceiver rather than solely in routing policy, not on the stated defect. For this scenario the expected acceptance result would be: A controlled IPv6 path succeeds through the correct network instance.

Question 150

At Oakline Digital Commerce, while checking a network-instance assignment, the data center fabric team observes: A service has healthy IPv4 reachability but its IPv6 traffic fails due to missing local addressing. Which result would establish that the original defect has been corrected?

  1. A controlled IPv6 path succeeds through the correct network instance
  2. A corrected link maintains stable operational status with no recurring error growth
  3. The report includes both the intended setting and relevant dependent operational state
  4. The automated query succeeds in fresh sessions without hidden interactive state

Explanation

Correct Answer

A:

At Oakline Digital Commerce, while checking a network-instance assignment, this result is the relevant closure evidence: A controlled IPv6 path succeeds through the correct network instance. It checks the effect of: Check IPv6 addressing and table state separately from IPv4 and complete the missing configuration. The underlying issue was: The subinterface or IP-VRF lacks the intended IPv6 address or route information.

Incorrect Answers

B:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: A corrected link maintains stable operational status with no recurring error growth. Using that approach would investigate A high-speed interface shows rapidly increasing errors while routing sessions still intermittently recover instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The subinterface or IP-VRF lacks the intended IPv6 address or route information.

C:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: The report includes both the intended setting and relevant dependent operational state. The alternative focuses on A broad CLI match filter excludes dependent configuration or state fields, not on the stated defect. For this scenario the expected acceptance result would be: A controlled IPv6 path succeeds through the correct network instance.

D:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: The automated query succeeds in fresh sessions without hidden interactive state. This option assumes the other problem (A script relies on an environment variable that is unset in automated CLI sessions) is present. The case instead describes A service has healthy IPv4 reachability but its IPv6 traffic fails due to missing local addressing, for which the causal issue is The subinterface or IP-VRF lacks the intended IPv6 address or route information.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests