McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 16

Question 150

At Oakline Digital Commerce, while checking a network-instance assignment, the data center fabric team observes: A service has healthy IPv4 reachability but its IPv6 traffic fails due to missing local addressing. Which result would establish that the original defect has been corrected?

  1. A controlled IPv6 path succeeds through the correct network instance
  2. A corrected link maintains stable operational status with no recurring error growth
  3. The report includes both the intended setting and relevant dependent operational state
  4. The automated query succeeds in fresh sessions without hidden interactive state

Explanation

Correct Answer

A:

At Oakline Digital Commerce, while checking a network-instance assignment, this result is the relevant closure evidence: A controlled IPv6 path succeeds through the correct network instance. It checks the effect of: Check IPv6 addressing and table state separately from IPv4 and complete the missing configuration. The underlying issue was: The subinterface or IP-VRF lacks the intended IPv6 address or route information.

Incorrect Answers

B:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: A corrected link maintains stable operational status with no recurring error growth. Using that approach would investigate A high-speed interface shows rapidly increasing errors while routing sessions still intermittently recover instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The subinterface or IP-VRF lacks the intended IPv6 address or route information.

C:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: The report includes both the intended setting and relevant dependent operational state. The alternative focuses on A broad CLI match filter excludes dependent configuration or state fields, not on the stated defect. For this scenario the expected acceptance result would be: A controlled IPv6 path succeeds through the correct network instance.

D:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: The automated query succeeds in fresh sessions without hidden interactive state. This option assumes the other problem (A script relies on an environment variable that is unset in automated CLI sessions) is present. The case instead describes A service has healthy IPv4 reachability but its IPv6 traffic fails due to missing local addressing, for which the causal issue is The subinterface or IP-VRF lacks the intended IPv6 address or route information.

Question 151

At Oakline Digital Commerce, while checking a network-instance assignment, the data center fabric team observes: A service has healthy IPv4 reachability but its IPv6 traffic fails due to missing local addressing. Which root cause fits the reported state?

  1. The transceiver type or physical settings do not match the approved platform and link capabilities
  2. The old physical port mapping was reused without reconciling current interface identifiers
  3. The diagnostic session lacks filtering or structured output for the relevant field
  4. The subinterface or IP-VRF lacks the intended IPv6 address or route information

Explanation

Correct Answer

D:

At Oakline Digital Commerce, while checking a network-instance assignment, the subinterface or IP-VRF lacks the intended IPv6 address or route information. That is the cause of the described failure, and a corrective check should demonstrate: A controlled IPv6 path succeeds through the correct network instance.

Incorrect Answers

A:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: The transceiver type or physical settings do not match the approved platform and link capabilities. Using that approach would investigate A 100G uplink remains down after an optics swap despite a valid peer port instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The subinterface or IP-VRF lacks the intended IPv6 address or route information.

B:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: The old physical port mapping was reused without reconciling current interface identifiers. The alternative focuses on The old physical port mapping was reused without reconciling current interface identifiers, not on the stated defect. For this scenario the expected acceptance result would be: A controlled IPv6 path succeeds through the correct network instance.

C:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: The diagnostic session lacks filtering or structured output for the relevant field. This option assumes the other problem (A CLI command displays a long output and the engineer misses the failed interface line) is present. The case instead describes A service has healthy IPv4 reachability but its IPv6 traffic fails due to missing local addressing, for which the causal issue is The subinterface or IP-VRF lacks the intended IPv6 address or route information.

Question 152

At Oakline Digital Commerce, while checking a network-instance assignment, the data center fabric team observes: A service has healthy IPv4 reachability but its IPv6 traffic fails due to missing local addressing. Which recurring validation best prevents this failure mode?

  1. Standardize filtered state queries for repeated fabric diagnostics
  2. Test scripts in a clean noninteractive execution environment
  3. Implement transaction result and read-after-write checks in automation
  4. Test dual-stack families independently on every service turn-up

Explanation

Correct Answer

D:

At Oakline Digital Commerce, while checking a network-instance assignment, use this repeatable control: Test dual-stack families independently on every service turn-up. Its scope is the problem (The subinterface or IP-VRF lacks the intended IPv6 address or route information), not an unrelated network maintenance procedure.

Incorrect Answers

A:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: Standardize filtered state queries for repeated fabric diagnostics. The alternative focuses on The diagnostic session lacks filtering or structured output for the relevant field, not on the stated defect. For this scenario the expected acceptance result would be: A controlled IPv6 path succeeds through the correct network instance.

B:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: Test scripts in a clean noninteractive execution environment. This option assumes the other problem (A script relies on an environment variable that is unset in automated CLI sessions) is present. The case instead describes A service has healthy IPv4 reachability but its IPv6 traffic fails due to missing local addressing, for which the causal issue is The subinterface or IP-VRF lacks the intended IPv6 address or route information.

C:

At Oakline Digital Commerce, while checking a network-instance assignment, this option proposes: Implement transaction result and read-after-write checks in automation. It tests a different symptom: An API client repeatedly sends configuration changes but the switch does not reflect them. For the observed case, the relevant distinction is The subinterface or IP-VRF lacks the intended IPv6 address or route information, with verification: A controlled IPv6 path succeeds through the correct network instance.

Question 153

At Silverridge Rail Logistics, while checking a network-instance assignment, the data center fabric team observes: An SR Linux configuration commit is rejected but the engineer assumes the failed change is active. Which targeted adjustment best corrects this behavior?

  1. Move the logical attachment to the correct MAC-VRF and validate tenant separation
  2. Check supported optics, lane settings, cabling and peer configuration before changing routing
  3. Read the commit failure details, fix the invalid model fields and commit an approved valid change
  4. Check IPv6 addressing and table state separately from IPv4 and complete the missing configuration

Explanation

Correct Answer

C:

At Silverridge Rail Logistics, while checking a network-instance assignment, choose this remediation because it targets the mechanism: The candidate change did not pass required schema or configuration validation. The supported corrective action is: Read the commit failure details, fix the invalid model fields and commit an approved valid change. Verification requires: The CLI reports a successful commit and the running datastore reflects the correction.

Incorrect Answers

A:

At Silverridge Rail Logistics, while checking a network-instance assignment, this option proposes: Move the logical attachment to the correct MAC-VRF and validate tenant separation. It tests a different symptom: MAC learning occurs in one MAC-VRF while a server belongs to another tenant. For the observed case, the relevant distinction is The candidate change did not pass required schema or configuration validation, with verification: The CLI reports a successful commit and the running datastore reflects the correction.

B:

The transceiver type or physical settings do not match the approved platform and link capabilities, but here the case reports An SR Linux configuration commit is rejected but the engineer assumes the failed change is active. Here, the candidate change did not pass required schema or configuration validation.

D:

At Silverridge Rail Logistics, while checking a network-instance assignment, this option proposes: Check IPv6 addressing and table state separately from IPv4 and complete the missing configuration. This is a valid category of fabric maintenance for another scenario (A service has healthy IPv4 reachability but its IPv6 traffic fails due to missing local addressing), not the targeted action for Silverridge Rail Logistics. The distinction is the actual cause: The candidate change did not pass required schema or configuration validation.

Question 154

At Silverridge Rail Logistics, while checking a network-instance assignment, the data center fabric team observes: An SR Linux configuration commit is rejected but the engineer assumes the failed change is active. What observation should be required before this case is closed?

  1. The intended service learns the test MAC while other MAC-VRF tables remain unchanged
  2. The report includes both the intended setting and relevant dependent operational state
  3. A rehearsal restores the known-good state if the change acceptance test fails
  4. The CLI reports a successful commit and the running datastore reflects the correction

Explanation

Correct Answer

D:

At Silverridge Rail Logistics, while checking a network-instance assignment, the CLI reports a successful commit and the running datastore reflects the correction. This is linked directly to the observed symptom (An SR Linux configuration commit is rejected but the engineer assumes the failed change is active) and cannot be replaced by an unrelated healthy dashboard.

Incorrect Answers

A:

At Silverridge Rail Logistics, while checking a network-instance assignment, this option proposes: The intended service learns the test MAC while other MAC-VRF tables remain unchanged. The option describes a different failure mode: MAC learning occurs in one MAC-VRF while a server belongs to another tenant. It would address The bridge subinterface was attached to the wrong MAC-VRF service context, but here the case reports An SR Linux configuration commit is rejected but the engineer assumes the failed change is active. The current required evidence is: The CLI reports a successful commit and the running datastore reflects the correction.

B:

At Silverridge Rail Logistics, while checking a network-instance assignment, this option proposes: The report includes both the intended setting and relevant dependent operational state. That choice would be more relevant when this different symptom occurs: A management query returns incomplete output because an operator filters out relevant configuration branches. The present scenario instead points to: The candidate change did not pass required schema or configuration validation. The correct resolution has its own verification outcome: The CLI reports a successful commit and the running datastore reflects the correction.

C:

At Silverridge Rail Logistics, while checking a network-instance assignment, this option proposes: A rehearsal restores the known-good state if the change acceptance test fails. This is a valid category of fabric maintenance for another scenario (An engineer makes a risky multi-node edit without saving a known-good baseline), not the targeted action for Silverridge Rail Logistics. The distinction is the actual cause: The candidate change did not pass required schema or configuration validation.

Question 155

At Silverridge Rail Logistics, while checking a network-instance assignment, the data center fabric team observes: An SR Linux configuration commit is rejected but the engineer assumes the failed change is active. What causal finding should the investigation prioritize?

  1. The intended SR Linux CLI is YANG model-driven and has a different configuration hierarchy
  2. The automation copied an interactive environment assumption that does not exist in the scheduled context
  3. The candidate change did not pass required schema or configuration validation
  4. The IP addressing change was attached to the wrong interface or subinterface scope

Explanation

Correct Answer

C:

At Silverridge Rail Logistics, while checking a network-instance assignment, the evidence points to: The candidate change did not pass required schema or configuration validation. The follow-up test (The CLI reports a successful commit and the running datastore reflects the correction) distinguishes this mechanism from a separate fabric fault.

Incorrect Answers

A:

At Silverridge Rail Logistics, while checking a network-instance assignment, this option proposes: The intended SR Linux CLI is YANG model-driven and has a different configuration hierarchy. That choice would be more relevant when this different symptom occurs: A junior operator tries to use a command copied from a different network operating system. The present scenario instead points to: The candidate change did not pass required schema or configuration validation. The correct resolution has its own verification outcome: The CLI reports a successful commit and the running datastore reflects the correction.

B:

At Silverridge Rail Logistics, while checking a network-instance assignment, this option proposes: The automation copied an interactive environment assumption that does not exist in the scheduled context. This is a valid category of fabric maintenance for another scenario (A script relies on an environment variable that is unset in automated CLI sessions), not the targeted action for Silverridge Rail Logistics. The distinction is the actual cause: The candidate change did not pass required schema or configuration validation.

D:

At Silverridge Rail Logistics, while checking a network-instance assignment, this option proposes: The IP addressing change was attached to the wrong interface or subinterface scope. Using that approach would investigate A routed port is configured with an IP address under an unexpected subinterface context instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The candidate change did not pass required schema or configuration validation.

Question 156

At Silverridge Rail Logistics, while checking a network-instance assignment, the data center fabric team observes: An SR Linux configuration commit is rejected but the engineer assumes the failed change is active. What ongoing operational safeguard directly addresses this root issue?

  1. Inspect full interface paths when reviewing routed interface changes
  2. Keep source and filter expressions alongside captured troubleshooting output
  3. Test both default and explicit VLAN classification after port changes
  4. Treat commit success as a separate acceptance gate from successful typing

Explanation

Correct Answer

D:

At Silverridge Rail Logistics, while checking a network-instance assignment, use this repeatable control: Treat commit success as a separate acceptance gate from successful typing. Its scope is the problem (The candidate change did not pass required schema or configuration validation), not an unrelated network maintenance procedure.

Incorrect Answers

A:

At Silverridge Rail Logistics, while checking a network-instance assignment, this option proposes: Inspect full interface paths when reviewing routed interface changes. This is a valid category of fabric maintenance for another scenario (A routed port is configured with an IP address under an unexpected subinterface context), not the targeted action for Silverridge Rail Logistics. The distinction is the actual cause: The candidate change did not pass required schema or configuration validation.

B:

At Silverridge Rail Logistics, while checking a network-instance assignment, this option proposes: Keep source and filter expressions alongside captured troubleshooting output. Although related to SR Linux CLI, model configuration and interfaces, the proposed change fits another mechanism: A broad CLI match filter excludes dependent configuration or state fields. The evidence in the current case requires a different result: The CLI reports a successful commit and the running datastore reflects the correction.

C:

At Silverridge Rail Logistics, while checking a network-instance assignment, this option proposes: Test both default and explicit VLAN classification after port changes. Using that approach would investigate A native untagged frame is unexpectedly treated as a tagged tenant service instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The candidate change did not pass required schema or configuration validation.

Question 157

At Baystone Municipal Networks, while committing an SR Linux configuration change, the data center fabric team observes: An operator inspects an IPv4 route in a tenant instance but checks the default IPv4 table. Which supported remediation most directly addresses the stated failure?

  1. Use the supported model-driven JSON output or management API with named fields
  2. Inspect the IPv4 route table in the correct IP-VRF context
  3. Check supported optics, lane settings, cabling and peer configuration before changing routing
  4. Investigate attachment topology and apply supported MAC-move controls without globally suppressing learning

Explanation

Correct Answer

B:

At Baystone Municipal Networks, while committing an SR Linux configuration change, for Baystone Municipal Networks, the applicable change is: Inspect the IPv4 route table in the correct IP-VRF context. The causal issue is: The diagnostic omits the selected network instance during route lookup. A successful validation would show: The test prefix and its selected next hops appear only in the expected routing instance.

Incorrect Answers

A:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: Use the supported model-driven JSON output or management API with named fields. Using that approach would investigate A configuration automation script breaks after parsing human-formatted CLI tables instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The diagnostic omits the selected network instance during route lookup.

C:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: Check supported optics, lane settings, cabling and peer configuration before changing routing. This option assumes the other problem (A 100G uplink remains down after an optics swap despite a valid peer port) is present. The case instead describes An operator inspects an IPv4 route in a tenant instance but checks the default IPv4 table, for which the causal issue is The diagnostic omits the selected network instance during route lookup.

D:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: Investigate attachment topology and apply supported MAC-move controls without globally suppressing learning. It tests a different symptom: A device reports repeated MAC moves between two attachment points during a suspected Layer 2 loop. For the observed case, the relevant distinction is The diagnostic omits the selected network instance during route lookup, with verification: The test prefix and its selected next hops appear only in the expected routing instance.

Question 158

At Baystone Municipal Networks, while committing an SR Linux configuration change, the data center fabric team observes: An operator inspects an IPv4 route in a tenant instance but checks the default IPv4 table. Which evidence directly validates the intended repair?

  1. The test prefix and its selected next hops appear only in the expected routing instance
  2. The parser reads the required values after output formatting changes without field misalignment
  3. A new session retains committed network settings regardless of interactive alias availability
  4. Only the affected subinterface shows the relevant error or traffic delta

Explanation

Correct Answer

A:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this result is the relevant closure evidence: The test prefix and its selected next hops appear only in the expected routing instance. It checks the effect of: Inspect the IPv4 route table in the correct IP-VRF context. The underlying issue was: The diagnostic omits the selected network instance during route lookup.

Incorrect Answers

B:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: The parser reads the required values after output formatting changes without field misalignment. This option assumes the other problem (A configuration automation script breaks after parsing human-formatted CLI tables) is present. The case instead describes An operator inspects an IPv4 route in a tenant instance but checks the default IPv4 table, for which the causal issue is The diagnostic omits the selected network instance during route lookup.

C:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: A new session retains committed network settings regardless of interactive alias availability. It tests a different symptom: An engineer expects a CLI alias to change the persistent device configuration. For the observed case, the relevant distinction is The diagnostic omits the selected network instance during route lookup, with verification: The test prefix and its selected next hops appear only in the expected routing instance.

D:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: Only the affected subinterface shows the relevant error or traffic delta. The option describes a different failure mode: An interface statistics report aggregates multiple subinterfaces and hides the affected VLAN. It would address The monitoring system measures only parent port counters when per-subinterface visibility is needed, but here the case reports An operator inspects an IPv4 route in a tenant instance but checks the default IPv4 table. The current required evidence is: The test prefix and its selected next hops appear only in the expected routing instance.

Question 159

At Baystone Municipal Networks, while committing an SR Linux configuration change, the data center fabric team observes: An operator inspects an IPv4 route in a tenant instance but checks the default IPv4 table. Which underlying mechanism best accounts for this symptom?

  1. The automation copied an interactive environment assumption that does not exist in the scheduled context
  2. The integration assumes display column positions are a stable machine-readable interface
  3. The diagnostic omits the selected network instance during route lookup
  4. The change procedure omitted configuration checkpoints and rollback criteria

Explanation

Correct Answer

C:

At Baystone Municipal Networks, while committing an SR Linux configuration change, the evidence points to: The diagnostic omits the selected network instance during route lookup. The follow-up test (The test prefix and its selected next hops appear only in the expected routing instance) distinguishes this mechanism from a separate fabric fault.

Incorrect Answers

A:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: The automation copied an interactive environment assumption that does not exist in the scheduled context. This option assumes the other problem (A script relies on an environment variable that is unset in automated CLI sessions) is present. The case instead describes An operator inspects an IPv4 route in a tenant instance but checks the default IPv4 table, for which the causal issue is The diagnostic omits the selected network instance during route lookup.

B:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: The integration assumes display column positions are a stable machine-readable interface. It tests a different symptom: A configuration automation script breaks after parsing human-formatted CLI tables. For the observed case, the relevant distinction is The diagnostic omits the selected network instance during route lookup, with verification: The test prefix and its selected next hops appear only in the expected routing instance.

D:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: The change procedure omitted configuration checkpoints and rollback criteria. That choice would be more relevant when this different symptom occurs: An engineer makes a risky multi-node edit without saving a known-good baseline. The present scenario instead points to: The diagnostic omits the selected network instance during route lookup. The correct resolution has its own verification outcome: The test prefix and its selected next hops appear only in the expected routing instance.

Question 160

At Baystone Municipal Networks, while committing an SR Linux configuration change, the data center fabric team observes: An operator inspects an IPv4 route in a tenant instance but checks the default IPv4 table. Which review gate should be added to prevent the same error?

  1. Include routing-instance names in troubleshooting artifacts
  2. Update physical-to-logical interface mappings after hardware changes
  3. Keep an optics and interface compatibility checklist for replacements
  4. Serialize conflicting maintenance or require peer review of candidate differences

Explanation

Correct Answer

A:

At Baystone Municipal Networks, while committing an SR Linux configuration change, the preventive control is: Include routing-instance names in troubleshooting artifacts. It catches the same mechanism (The diagnostic omits the selected network instance during route lookup) before the symptom recurs. An appropriate regression observation is: The test prefix and its selected next hops appear only in the expected routing instance.

Incorrect Answers

B:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: Update physical-to-logical interface mappings after hardware changes. The option describes a different failure mode: A fabric team applies a new interface description to the wrong port after a chassis replacement. It would address The old physical port mapping was reused without reconciling current interface identifiers, but here the case reports An operator inspects an IPv4 route in a tenant instance but checks the default IPv4 table. The current required evidence is: The test prefix and its selected next hops appear only in the expected routing instance.

C:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: Keep an optics and interface compatibility checklist for replacements. That choice would be more relevant when this different symptom occurs: A 100G uplink remains down after an optics swap despite a valid peer port. The present scenario instead points to: The diagnostic omits the selected network instance during route lookup. The correct resolution has its own verification outcome: The test prefix and its selected next hops appear only in the expected routing instance.

D:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: Serialize conflicting maintenance or require peer review of candidate differences. This is a valid category of fabric maintenance for another scenario (Two administrators apply incompatible pending edits to the same SR Linux device), not the targeted action for Baystone Municipal Networks. The distinction is the actual cause: The diagnostic omits the selected network instance during route lookup.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests