McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 17

Question 160

At Baystone Municipal Networks, while committing an SR Linux configuration change, the data center fabric team observes: An operator inspects an IPv4 route in a tenant instance but checks the default IPv4 table. Which review gate should be added to prevent the same error?

  1. Include routing-instance names in troubleshooting artifacts
  2. Update physical-to-logical interface mappings after hardware changes
  3. Keep an optics and interface compatibility checklist for replacements
  4. Serialize conflicting maintenance or require peer review of candidate differences

Explanation

Correct Answer

A:

At Baystone Municipal Networks, while committing an SR Linux configuration change, the preventive control is: Include routing-instance names in troubleshooting artifacts. It catches the same mechanism (The diagnostic omits the selected network instance during route lookup) before the symptom recurs. An appropriate regression observation is: The test prefix and its selected next hops appear only in the expected routing instance.

Incorrect Answers

B:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: Update physical-to-logical interface mappings after hardware changes. The option describes a different failure mode: A fabric team applies a new interface description to the wrong port after a chassis replacement. It would address The old physical port mapping was reused without reconciling current interface identifiers, but here the case reports An operator inspects an IPv4 route in a tenant instance but checks the default IPv4 table. The current required evidence is: The test prefix and its selected next hops appear only in the expected routing instance.

C:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: Keep an optics and interface compatibility checklist for replacements. That choice would be more relevant when this different symptom occurs: A 100G uplink remains down after an optics swap despite a valid peer port. The present scenario instead points to: The diagnostic omits the selected network instance during route lookup. The correct resolution has its own verification outcome: The test prefix and its selected next hops appear only in the expected routing instance.

D:

At Baystone Municipal Networks, while committing an SR Linux configuration change, this option proposes: Serialize conflicting maintenance or require peer review of candidate differences. This is a valid category of fabric maintenance for another scenario (Two administrators apply incompatible pending edits to the same SR Linux device), not the targeted action for Baystone Municipal Networks. The distinction is the actual cause: The diagnostic omits the selected network instance during route lookup.

Question 161

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, the data center fabric team observes: An API client repeatedly sends configuration changes but the switch does not reflect them. What configuration or operational change should the engineer prioritize?

  1. Review transaction status and apply the supported commit or update semantics
  2. Use a narrower filter and inspect the complete model subtree required for the diagnosis
  3. Investigate attachment topology and apply supported MAC-move controls without globally suppressing learning
  4. Set and verify required execution context explicitly or use a self-contained model path

Explanation

Correct Answer

A:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, review transaction status and apply the supported commit or update semantics. This addresses the specific failure mechanism (The API transaction is not completing or being committed according to the supported datastore workflow) rather than treating only the visible alarm. The required acceptance evidence is: A subsequent state read shows the intended committed configuration and effect.

Incorrect Answers

B:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, this option proposes: Use a narrower filter and inspect the complete model subtree required for the diagnosis. This is a valid category of fabric maintenance for another scenario (A management query returns incomplete output because an operator filters out relevant configuration branches), not the targeted action for Seabrook Rail Logistics. The distinction is the actual cause: The API transaction is not completing or being committed according to the supported datastore workflow.

C:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, this option proposes: Investigate attachment topology and apply supported MAC-move controls without globally suppressing learning. Although related to SR Linux CLI, model configuration and interfaces, the proposed change fits another mechanism: The endpoint is reachable through unstable Layer 2 paths or has been incorrectly dual-attached. The evidence in the current case requires a different result: A subsequent state read shows the intended committed configuration and effect.

D:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, this option proposes: Set and verify required execution context explicitly or use a self-contained model path. Using that approach would investigate A script relies on an environment variable that is unset in automated CLI sessions instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The API transaction is not completing or being committed according to the supported datastore workflow.

Question 162

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, the data center fabric team observes: An API client repeatedly sends configuration changes but the switch does not reflect them. What test result proves the affected fabric function now works?

  1. A subsequent state read shows the intended committed configuration and effect
  2. The MAC location stabilizes and legitimate endpoint traffic remains forwarded
  3. Link status and physical error counters are healthy on both ends of a supported connection
  4. Tagged and untagged test frames enter their designated network instances

Explanation

Correct Answer

A:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, this result is the relevant closure evidence: A subsequent state read shows the intended committed configuration and effect. It checks the effect of: Review transaction status and apply the supported commit or update semantics. The underlying issue was: The API transaction is not completing or being committed according to the supported datastore workflow.

Incorrect Answers

B:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, this option proposes: The MAC location stabilizes and legitimate endpoint traffic remains forwarded. Although related to SR Linux CLI, model configuration and interfaces, the proposed change fits another mechanism: The endpoint is reachable through unstable Layer 2 paths or has been incorrectly dual-attached. The evidence in the current case requires a different result: A subsequent state read shows the intended committed configuration and effect.

C:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, this option proposes: Link status and physical error counters are healthy on both ends of a supported connection. Using that approach would investigate A 100G uplink remains down after an optics swap despite a valid peer port instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The API transaction is not completing or being committed according to the supported datastore workflow.

D:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, this option proposes: Tagged and untagged test frames enter their designated network instances. The alternative focuses on The subinterface classification is configured for the wrong tagged or untagged traffic type, not on the stated defect. For this scenario the expected acceptance result would be: A subsequent state read shows the intended committed configuration and effect.

Question 163

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, the data center fabric team observes: An API client repeatedly sends configuration changes but the switch does not reflect them. What specific misconfiguration or design error is most likely?

  1. The intended SR Linux CLI is YANG model-driven and has a different configuration hierarchy
  2. The diagnostic session lacks filtering or structured output for the relevant field
  3. The subinterface classification is configured for the wrong tagged or untagged traffic type
  4. The API transaction is not completing or being committed according to the supported datastore workflow

Explanation

Correct Answer

D:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, the API transaction is not completing or being committed according to the supported datastore workflow. That is the cause of the described failure, and a corrective check should demonstrate: A subsequent state read shows the intended committed configuration and effect.

Incorrect Answers

A:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, this option proposes: The intended SR Linux CLI is YANG model-driven and has a different configuration hierarchy. Although related to SR Linux CLI, model configuration and interfaces, the proposed change fits another mechanism: The intended SR Linux CLI is YANG model-driven and has a different configuration hierarchy. The evidence in the current case requires a different result: A subsequent state read shows the intended committed configuration and effect.

B:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, this option proposes: The diagnostic session lacks filtering or structured output for the relevant field. Using that approach would investigate A CLI command displays a long output and the engineer misses the failed interface line instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The API transaction is not completing or being committed according to the supported datastore workflow.

C:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, this option proposes: The subinterface classification is configured for the wrong tagged or untagged traffic type. The alternative focuses on The subinterface classification is configured for the wrong tagged or untagged traffic type, not on the stated defect. For this scenario the expected acceptance result would be: A subsequent state read shows the intended committed configuration and effect.

Question 164

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, the data center fabric team observes: An API client repeatedly sends configuration changes but the switch does not reflect them. What repeatable acceptance check would reduce recurrence?

  1. Maintain both physical and logical interface visibility in fabric monitoring
  2. Keep release-specific command examples and avoid vendor CLI substitution
  3. Implement transaction result and read-after-write checks in automation
  4. Standardize filtered state queries for repeated fabric diagnostics

Explanation

Correct Answer

C:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, for Seabrook Rail Logistics, include the safeguard: Implement transaction result and read-after-write checks in automation. It reduces repeat risk from the original mechanism and complements a validation of: A subsequent state read shows the intended committed configuration and effect.

Incorrect Answers

A:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, this option proposes: Maintain both physical and logical interface visibility in fabric monitoring. Using that approach would investigate An interface statistics report aggregates multiple subinterfaces and hides the affected VLAN instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The API transaction is not completing or being committed according to the supported datastore workflow.

B:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, this option proposes: Keep release-specific command examples and avoid vendor CLI substitution. The alternative focuses on The intended SR Linux CLI is YANG model-driven and has a different configuration hierarchy, not on the stated defect. For this scenario the expected acceptance result would be: A subsequent state read shows the intended committed configuration and effect.

D:

At Seabrook Rail Logistics, while auditing the model-driven CLI hierarchy, this option proposes: Standardize filtered state queries for repeated fabric diagnostics. It tests a different symptom: A CLI command displays a long output and the engineer misses the failed interface line. For the observed case, the relevant distinction is The API transaction is not completing or being committed according to the supported datastore workflow, with verification: A subsequent state read shows the intended committed configuration and effect.

Question 165

At Woodcrest Municipal Networks, while reviewing interface counters, the data center fabric team observes: A native untagged frame is unexpectedly treated as a tagged tenant service. Which action resolves the identified fabric-management issue?

  1. Use the supported model-driven JSON output or management API with named fields
  2. Investigate attachment topology and apply supported MAC-move controls without globally suppressing learning
  3. Create an approved SR Linux configuration checkpoint before applying the controlled change
  4. Correct the subinterface match for untagged ingress while preserving other tagged services

Explanation

Correct Answer

D:

At Woodcrest Municipal Networks, while reviewing interface counters, the targeted correction is: Correct the subinterface match for untagged ingress while preserving other tagged services. The reported symptom is explained by: The subinterface classification is configured for the wrong tagged or untagged traffic type. Confirm the change by testing this outcome: Tagged and untagged test frames enter their designated network instances.

Incorrect Answers

A:

At Woodcrest Municipal Networks, while reviewing interface counters, this option proposes: Use the supported model-driven JSON output or management API with named fields. This option assumes the other problem (A configuration automation script breaks after parsing human-formatted CLI tables) is present. The case instead describes A native untagged frame is unexpectedly treated as a tagged tenant service, for which the causal issue is The subinterface classification is configured for the wrong tagged or untagged traffic type.

B:

At Woodcrest Municipal Networks, while reviewing interface counters, this option proposes: Investigate attachment topology and apply supported MAC-move controls without globally suppressing learning. It tests a different symptom: A device reports repeated MAC moves between two attachment points during a suspected Layer 2 loop. For the observed case, the relevant distinction is The subinterface classification is configured for the wrong tagged or untagged traffic type, with verification: Tagged and untagged test frames enter their designated network instances.

C:

At Woodcrest Municipal Networks, while reviewing interface counters, this option proposes: Create an approved SR Linux configuration checkpoint before applying the controlled change. The option describes a different failure mode: An engineer makes a risky multi-node edit without saving a known-good baseline. It would address The change procedure omitted configuration checkpoints and rollback criteria, but here the case reports A native untagged frame is unexpectedly treated as a tagged tenant service. The current required evidence is: Tagged and untagged test frames enter their designated network instances.

Question 166

At Woodcrest Municipal Networks, while reviewing interface counters, the data center fabric team observes: A native untagged frame is unexpectedly treated as a tagged tenant service. Which result would establish that the original defect has been corrected?

  1. The CLI reports a successful commit and the running datastore reflects the correction
  2. Tagged and untagged test frames enter their designated network instances
  3. The report includes both the intended setting and relevant dependent operational state
  4. A corrected link maintains stable operational status with no recurring error growth

Explanation

Correct Answer

B:

At Woodcrest Municipal Networks, while reviewing interface counters, for Woodcrest Municipal Networks, accept the repair only after this observation: Tagged and untagged test frames enter their designated network instances. The test distinguishes real recovery from a superficial status change.

Incorrect Answers

A:

At Woodcrest Municipal Networks, while reviewing interface counters, this option proposes: The CLI reports a successful commit and the running datastore reflects the correction. It tests a different symptom: An SR Linux configuration commit is rejected but the engineer assumes the failed change is active. For the observed case, the relevant distinction is The subinterface classification is configured for the wrong tagged or untagged traffic type, with verification: Tagged and untagged test frames enter their designated network instances.

C:

At Woodcrest Municipal Networks, while reviewing interface counters, this option proposes: The report includes both the intended setting and relevant dependent operational state. That choice would be more relevant when this different symptom occurs: A management query returns incomplete output because an operator filters out relevant configuration branches. The present scenario instead points to: The subinterface classification is configured for the wrong tagged or untagged traffic type. The correct resolution has its own verification outcome: Tagged and untagged test frames enter their designated network instances.

D:

At Woodcrest Municipal Networks, while reviewing interface counters, this option proposes: A corrected link maintains stable operational status with no recurring error growth. This is a valid category of fabric maintenance for another scenario (A high-speed interface shows rapidly increasing errors while routing sessions still intermittently recover), not the targeted action for Woodcrest Municipal Networks. The distinction is the actual cause: The subinterface classification is configured for the wrong tagged or untagged traffic type.

Question 167

At Woodcrest Municipal Networks, while reviewing interface counters, the data center fabric team observes: A native untagged frame is unexpectedly treated as a tagged tenant service. Which root cause fits the reported state?

  1. An interactive command shortcut has been confused with configuration datastore content
  2. The change process lacks candidate-change coordination and effective-diff review
  3. The endpoint is reachable through unstable Layer 2 paths or has been incorrectly dual-attached
  4. The subinterface classification is configured for the wrong tagged or untagged traffic type

Explanation

Correct Answer

D:

At Woodcrest Municipal Networks, while reviewing interface counters, the subinterface classification is configured for the wrong tagged or untagged traffic type. That is the cause of the described failure, and a corrective check should demonstrate: Tagged and untagged test frames enter their designated network instances.

Incorrect Answers

A:

At Woodcrest Municipal Networks, while reviewing interface counters, this option proposes: An interactive command shortcut has been confused with configuration datastore content. The option describes a different failure mode: An engineer expects a CLI alias to change the persistent device configuration. It would address An interactive command shortcut has been confused with configuration datastore content, but here the case reports A native untagged frame is unexpectedly treated as a tagged tenant service. The current required evidence is: Tagged and untagged test frames enter their designated network instances.

B:

At Woodcrest Municipal Networks, while reviewing interface counters, this option proposes: The change process lacks candidate-change coordination and effective-diff review. That choice would be more relevant when this different symptom occurs: Two administrators apply incompatible pending edits to the same SR Linux device. The present scenario instead points to: The subinterface classification is configured for the wrong tagged or untagged traffic type. The correct resolution has its own verification outcome: Tagged and untagged test frames enter their designated network instances.

C:

At Woodcrest Municipal Networks, while reviewing interface counters, this option proposes: The endpoint is reachable through unstable Layer 2 paths or has been incorrectly dual-attached. This is a valid category of fabric maintenance for another scenario (A device reports repeated MAC moves between two attachment points during a suspected Layer 2 loop), not the targeted action for Woodcrest Municipal Networks. The distinction is the actual cause: The subinterface classification is configured for the wrong tagged or untagged traffic type.

Question 168

At Woodcrest Municipal Networks, while reviewing interface counters, the data center fabric team observes: A native untagged frame is unexpectedly treated as a tagged tenant service. Which recurring validation best prevents this failure mode?

  1. Alert on abnormal MAC-move events while reviewing multi-homing designs
  2. Serialize conflicting maintenance or require peer review of candidate differences
  3. Separate operator shell conveniences from device configuration policy
  4. Test both default and explicit VLAN classification after port changes

Explanation

Correct Answer

D:

At Woodcrest Municipal Networks, while reviewing interface counters, use this repeatable control: Test both default and explicit VLAN classification after port changes. Its scope is the problem (The subinterface classification is configured for the wrong tagged or untagged traffic type), not an unrelated network maintenance procedure.

Incorrect Answers

A:

At Woodcrest Municipal Networks, while reviewing interface counters, this option proposes: Alert on abnormal MAC-move events while reviewing multi-homing designs. That choice would be more relevant when this different symptom occurs: A device reports repeated MAC moves between two attachment points during a suspected Layer 2 loop. The present scenario instead points to: The subinterface classification is configured for the wrong tagged or untagged traffic type. The correct resolution has its own verification outcome: Tagged and untagged test frames enter their designated network instances.

B:

At Woodcrest Municipal Networks, while reviewing interface counters, this option proposes: Serialize conflicting maintenance or require peer review of candidate differences. This is a valid category of fabric maintenance for another scenario (Two administrators apply incompatible pending edits to the same SR Linux device), not the targeted action for Woodcrest Municipal Networks. The distinction is the actual cause: The subinterface classification is configured for the wrong tagged or untagged traffic type.

C:

At Woodcrest Municipal Networks, while reviewing interface counters, this option proposes: Separate operator shell conveniences from device configuration policy. Although related to SR Linux CLI, model configuration and interfaces, the proposed change fits another mechanism: An interactive command shortcut has been confused with configuration datastore content. The evidence in the current case requires a different result: Tagged and untagged test frames enter their designated network instances.

Question 169

At Northpoint Energy Services, while reviewing interface counters, the data center fabric team observes: An engineer places an IP interface in a default network instance instead of the assigned tenant VRF. Which targeted adjustment best corrects this behavior?

  1. Set and verify required execution context explicitly or use a self-contained model path
  2. Locate the capability in the SR Linux native model hierarchy and validate its supported configuration path
  3. Investigate attachment topology and apply supported MAC-move controls without globally suppressing learning
  4. Bind the approved interface to the intended IP-VRF and check the resulting routes

Explanation

Correct Answer

D:

At Northpoint Energy Services, while reviewing interface counters, the targeted correction is: Bind the approved interface to the intended IP-VRF and check the resulting routes. The reported symptom is explained by: The interface-to-network-instance binding does not follow the tenancy design. Confirm the change by testing this outcome: Traffic sourced in the tenant VRF follows its own lookup table without appearing in unrelated VRFs.

Incorrect Answers

A:

At Northpoint Energy Services, while reviewing interface counters, this option proposes: Set and verify required execution context explicitly or use a self-contained model path. Although related to SR Linux CLI, model configuration and interfaces, the proposed change fits another mechanism: The automation copied an interactive environment assumption that does not exist in the scheduled context. The evidence in the current case requires a different result: Traffic sourced in the tenant VRF follows its own lookup table without appearing in unrelated VRFs.

B:

At Northpoint Energy Services, while reviewing interface counters, this option proposes: Locate the capability in the SR Linux native model hierarchy and validate its supported configuration path. Using that approach would investigate A junior operator tries to use a command copied from a different network operating system instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The interface-to-network-instance binding does not follow the tenancy design.

C:

At Northpoint Energy Services, while reviewing interface counters, this option proposes: Investigate attachment topology and apply supported MAC-move controls without globally suppressing learning. The alternative focuses on The endpoint is reachable through unstable Layer 2 paths or has been incorrectly dual-attached, not on the stated defect. For this scenario the expected acceptance result would be: Traffic sourced in the tenant VRF follows its own lookup table without appearing in unrelated VRFs.

Question 170

At Northpoint Energy Services, while reviewing interface counters, the data center fabric team observes: An engineer places an IP interface in a default network instance instead of the assigned tenant VRF. What observation should be required before this case is closed?

  1. The final committed diff contains both approved intents and no overwritten change
  2. The report includes both the intended setting and relevant dependent operational state
  3. Traffic sourced in the tenant VRF follows its own lookup table without appearing in unrelated VRFs
  4. The intended port displays the approved description and the neighbor mapping is correct

Explanation

Correct Answer

C:

At Northpoint Energy Services, while reviewing interface counters, the decisive validation is: Traffic sourced in the tenant VRF follows its own lookup table without appearing in unrelated VRFs. It verifies that the change (Bind the approved interface to the intended IP-VRF and check the resulting routes) resolved the mechanism: The interface-to-network-instance binding does not follow the tenancy design.

Incorrect Answers

A:

At Northpoint Energy Services, while reviewing interface counters, this option proposes: The final committed diff contains both approved intents and no overwritten change. Using that approach would investigate Two administrators apply incompatible pending edits to the same SR Linux device instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The interface-to-network-instance binding does not follow the tenancy design.

B:

At Northpoint Energy Services, while reviewing interface counters, this option proposes: The report includes both the intended setting and relevant dependent operational state. The alternative focuses on A broad CLI match filter excludes dependent configuration or state fields, not on the stated defect. For this scenario the expected acceptance result would be: Traffic sourced in the tenant VRF follows its own lookup table without appearing in unrelated VRFs.

D:

At Northpoint Energy Services, while reviewing interface counters, this option proposes: The intended port displays the approved description and the neighbor mapping is correct. It tests a different symptom: A fabric team applies a new interface description to the wrong port after a chassis replacement. For the observed case, the relevant distinction is The interface-to-network-instance binding does not follow the tenancy design, with verification: Traffic sourced in the tenant VRF follows its own lookup table without appearing in unrelated VRFs.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests