McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 96

Question 950

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Define ordered terms within a policy-statement using from conditions and then actions. Which concept or operating procedure is best illustrated?

  1. Firewall source-address match
  2. Policy statement terms
  3. Firewall destination-address match
  4. Prefix-list policy match

Explanation

Correct Answer

B:

Junos routing policy statements use ordered terms that match route attributes and specify actions. This meets the stated need for policy statement terms.

Incorrect Answers

A:

The firewall source-address match scenario has a different requirement: A source-address condition evaluates the source IP field of matching packets. It does not directly meet the policy statement terms need in this question.

C:

The firewall destination-address match scenario has a different requirement: A destination-address condition selects packets by the address of the intended recipient. It does not directly meet the policy statement terms need in this question.

D:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the policy statement terms need in this question.

Question 951

A routing policy must apply different actions to different route categories. The proposed response is: Define ordered terms within a policy-statement using from conditions and then actions. Which explanation most accurately supports this response?

  1. Junos routing policy statements use ordered terms that match route attributes and specify actions.
  2. A source-address condition evaluates the source IP field of matching packets.
  3. A destination-address condition selects packets by the address of the intended recipient.
  4. A prefix list groups prefixes so route-matching policies can share a maintained set of network entries.

Explanation

Correct Answer

A:

Junos routing policy statements use ordered terms that match route attributes and specify actions. This meets the stated need for policy statement terms.

Incorrect Answers

B:

The firewall source-address match scenario has a different requirement: A source-address condition evaluates the source IP field of matching packets. It does not directly meet the policy statement terms need in this question.

C:

The firewall destination-address match scenario has a different requirement: A destination-address condition selects packets by the address of the intended recipient. It does not directly meet the policy statement terms need in this question.

D:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the policy statement terms need in this question.

Question 952

Within Routing Policy and Firewall Filters, a technician selects this approach: Define ordered terms within a policy-statement using from conditions and then actions. Which original requirement or fault would most directly justify it?

  1. A routing policy must apply different actions to different route categories.
  2. An ingress IPv4 filter should act only on packets from 192.0.2.0/24.
  3. An IPv4 filter should restrict traffic directed to server 198.51.100.20.
  4. Several approved customer prefixes should be reused by more than one routing policy.

Explanation

Correct Answer

A:

Junos routing policy statements use ordered terms that match route attributes and specify actions. This meets the stated need for policy statement terms.

Incorrect Answers

B:

The firewall source-address match scenario has a different requirement: A source-address condition evaluates the source IP field of matching packets. It does not directly meet the policy statement terms need in this question.

C:

The firewall destination-address match scenario has a different requirement: A destination-address condition selects packets by the address of the intended recipient. It does not directly meet the policy statement terms need in this question.

D:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the policy statement terms need in this question.

Question 953

Two routing policy terms match overlapping route sets and give conflicting actions. Which configuration or troubleshooting action most directly meets the need?

  1. Use route-filter 198.51.100.0/24 orlonger.
  2. Place the most specific intended term before the broader fallback term.
  3. Use supported loose unicast reverse-path verification where appropriate.
  4. Use a supported next-hop action in the correct routing policy context.

Explanation

Correct Answer

B:

Policy terms are evaluated in configured order, so earlier terminating actions can prevent later terms being reached. This meets the stated need for policy term evaluation order.

Incorrect Answers

A:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the policy term evaluation order need in this question.

C:

The unicast rpf loose mode scenario has a different requirement: Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry. It does not directly meet the policy term evaluation order need in this question.

D:

The policy next-hop action scenario has a different requirement: Routing policy can alter eligible route attributes, including supported next-hop behavior. It does not directly meet the policy term evaluation order need in this question.

Question 954

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Place the most specific intended term before the broader fallback term. Which concept or operating procedure is best illustrated?

  1. Orlonger route-filter match
  2. Unicast RPF loose mode
  3. Policy next-hop action
  4. Policy term evaluation order

Explanation

Correct Answer

D:

Policy terms are evaluated in configured order, so earlier terminating actions can prevent later terms being reached. This meets the stated need for policy term evaluation order.

Incorrect Answers

A:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the policy term evaluation order need in this question.

B:

The unicast rpf loose mode scenario has a different requirement: Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry. It does not directly meet the policy term evaluation order need in this question.

C:

The policy next-hop action scenario has a different requirement: Routing policy can alter eligible route attributes, including supported next-hop behavior. It does not directly meet the policy term evaluation order need in this question.

Question 955

Two routing policy terms match overlapping route sets and give conflicting actions. The proposed response is: Place the most specific intended term before the broader fallback term. Which explanation most accurately supports this response?

  1. The orlonger operator matches the named prefix and more-specific routes beneath it.
  2. Policy terms are evaluated in configured order, so earlier terminating actions can prevent later terms being reached.
  3. Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry.
  4. Routing policy can alter eligible route attributes, including supported next-hop behavior.

Explanation

Correct Answer

B:

Policy terms are evaluated in configured order, so earlier terminating actions can prevent later terms being reached. This meets the stated need for policy term evaluation order.

Incorrect Answers

A:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the policy term evaluation order need in this question.

C:

The unicast rpf loose mode scenario has a different requirement: Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry. It does not directly meet the policy term evaluation order need in this question.

D:

The policy next-hop action scenario has a different requirement: Routing policy can alter eligible route attributes, including supported next-hop behavior. It does not directly meet the policy term evaluation order need in this question.

Question 956

Within Routing Policy and Firewall Filters, a technician selects this approach: Place the most specific intended term before the broader fallback term. Which original requirement or fault would most directly justify it?

  1. A routing policy should match 198.51.100.0/24 and any of its more-specific routes.
  2. A multihomed edge sees asymmetric paths but should still drop packets with wholly unroutable source addresses.
  3. A policy needs to set an appropriate routing next-hop attribute for selected eligible routes.
  4. Two routing policy terms match overlapping route sets and give conflicting actions.

Explanation

Correct Answer

D:

Policy terms are evaluated in configured order, so earlier terminating actions can prevent later terms being reached. This meets the stated need for policy term evaluation order.

Incorrect Answers

A:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the policy term evaluation order need in this question.

B:

The unicast rpf loose mode scenario has a different requirement: Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry. It does not directly meet the policy term evaluation order need in this question.

C:

The policy next-hop action scenario has a different requirement: Routing policy can alter eligible route attributes, including supported next-hop behavior. It does not directly meet the policy term evaluation order need in this question.

Question 957

An export policy must treat static routes differently from OSPF-learned routes. Which configuration or troubleshooting action most directly meets the need?

  1. Apply a carefully designed input firewall filter to the lo0 interface as supported.
  2. Combine protocol tcp with destination-port 22 in the relevant filter term.
  3. Apply the intended firewall filter in the interface's output direction.
  4. Use a policy from protocol static match condition for the static-route term.

Explanation

Correct Answer

D:

The from protocol match selects routes based on their protocol origin. This meets the stated need for policy match protocol.

Incorrect Answers

A:

The protect routing engine lo0 scenario has a different requirement: A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges. It does not directly meet the policy match protocol need in this question.

B:

The firewall destination-port match scenario has a different requirement: A destination-port match identifies the transport service being requested by the packet. It does not directly meet the policy match protocol need in this question.

C:

The egress firewall filter scenario has a different requirement: An output filter evaluates eligible packets on egress rather than at ingress. It does not directly meet the policy match protocol need in this question.

Question 958

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use a policy from protocol static match condition for the static-route term. Which concept or operating procedure is best illustrated?

  1. Protect Routing Engine lo0
  2. Policy match protocol
  3. Firewall destination-port match
  4. Egress firewall filter

Explanation

Correct Answer

B:

The from protocol match selects routes based on their protocol origin. This meets the stated need for policy match protocol.

Incorrect Answers

A:

The protect routing engine lo0 scenario has a different requirement: A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges. It does not directly meet the policy match protocol need in this question.

C:

The firewall destination-port match scenario has a different requirement: A destination-port match identifies the transport service being requested by the packet. It does not directly meet the policy match protocol need in this question.

D:

The egress firewall filter scenario has a different requirement: An output filter evaluates eligible packets on egress rather than at ingress. It does not directly meet the policy match protocol need in this question.

Question 959

An export policy must treat static routes differently from OSPF-learned routes. The proposed response is: Use a policy from protocol static match condition for the static-route term. Which explanation most accurately supports this response?

  1. A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges.
  2. A destination-port match identifies the transport service being requested by the packet.
  3. The from protocol match selects routes based on their protocol origin.
  4. An output filter evaluates eligible packets on egress rather than at ingress.

Explanation

Correct Answer

C:

The from protocol match selects routes based on their protocol origin. This meets the stated need for policy match protocol.

Incorrect Answers

A:

The protect routing engine lo0 scenario has a different requirement: A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges. It does not directly meet the policy match protocol need in this question.

B:

The firewall destination-port match scenario has a different requirement: A destination-port match identifies the transport service being requested by the packet. It does not directly meet the policy match protocol need in this question.

D:

The egress firewall filter scenario has a different requirement: An output filter evaluates eligible packets on egress rather than at ingress. It does not directly meet the policy match protocol need in this question.

Question 960

Within Routing Policy and Firewall Filters, a technician selects this approach: Use a policy from protocol static match condition for the static-route term. Which original requirement or fault would most directly justify it?

  1. A router's management and routing-protocol traffic should be restricted to approved control-plane sources.
  2. An interface filter should identify TCP traffic intended for the SSH service on port 22.
  3. A traffic policy should classify or restrict packets as they leave the interface toward a downstream network.
  4. An export policy must treat static routes differently from OSPF-learned routes.

Explanation

Correct Answer

D:

The from protocol match selects routes based on their protocol origin. This meets the stated need for policy match protocol.

Incorrect Answers

A:

The protect routing engine lo0 scenario has a different requirement: A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges. It does not directly meet the policy match protocol need in this question.

B:

The firewall destination-port match scenario has a different requirement: A destination-port match identifies the transport service being requested by the packet. It does not directly meet the policy match protocol need in this question.

C:

The egress firewall filter scenario has a different requirement: An output filter evaluates eligible packets on egress rather than at ingress. It does not directly meet the policy match protocol need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests