McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 73

Question 720

Within Operational Monitoring and Maintenance, a technician selects this approach: Use monitor traffic interface with appropriate capture scope and safety controls. Which original requirement or fault would most directly justify it?

  1. A fiber uplink shows intermittent packet corruption with no routing adjacency drop.
  2. A remote destination is unreachable and the team must identify the point at which path responses stop.
  3. A packet-level mismatch requires inspecting traffic as it enters an interface on a lab device.
  4. An operator needs a quick table of port administrative state, link state, and configured IP addresses.

Explanation

Correct Answer

C:

Packet capture can reveal protocol headers and observed packet direction for troubleshooting. This meets the stated need for capture interface packets.

Incorrect Answers

A:

The interface packet-error counters scenario has a different requirement: Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses. It does not directly meet the capture interface packets need in this question.

B:

The traceroute intermediate hops scenario has a different requirement: Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. It does not directly meet the capture interface packets need in this question.

D:

The show interface terse status scenario has a different requirement: The terse interface command summarizes interface states and logical address information without full detail. It does not directly meet the capture interface packets need in this question.

Question 721

An uplink is congested and the engineer needs live interface traffic measurements. Which configuration or troubleshooting action most directly meets the need?

  1. Run show route extensive for the affected destination.
  2. Run request system power-off where supported and follow the platform's shutdown procedure.
  3. Use monitor interface traffic on the supported Junos platform.
  4. Run show system commit and correlate its entries with the incident window.

Explanation

Correct Answer

C:

Interface traffic monitoring displays changing packet and byte rates to help diagnose congestion. This meets the stated need for live interface traffic rates.

Incorrect Answers

A:

The detailed route attributes scenario has a different requirement: Detailed route output provides attributes that help explain why a particular path is selected. It does not directly meet the live interface traffic rates need in this question.

B:

The controlled device power-off scenario has a different requirement: An orderly power-off command prepares the operating system for controlled removal of power. It does not directly meet the live interface traffic rates need in this question.

D:

The inspect commit history scenario has a different requirement: Commit history records previous configuration-change events and associated user or time details. It does not directly meet the live interface traffic rates need in this question.

Question 722

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Use monitor interface traffic on the supported Junos platform. Which concept or operating procedure is best illustrated?

  1. Detailed route attributes
  2. Controlled device power-off
  3. Inspect commit history
  4. Live interface traffic rates

Explanation

Correct Answer

D:

Interface traffic monitoring displays changing packet and byte rates to help diagnose congestion. This meets the stated need for live interface traffic rates.

Incorrect Answers

A:

The detailed route attributes scenario has a different requirement: Detailed route output provides attributes that help explain why a particular path is selected. It does not directly meet the live interface traffic rates need in this question.

B:

The controlled device power-off scenario has a different requirement: An orderly power-off command prepares the operating system for controlled removal of power. It does not directly meet the live interface traffic rates need in this question.

C:

The inspect commit history scenario has a different requirement: Commit history records previous configuration-change events and associated user or time details. It does not directly meet the live interface traffic rates need in this question.

Question 723

An uplink is congested and the engineer needs live interface traffic measurements. The proposed response is: Use monitor interface traffic on the supported Junos platform. Which explanation most accurately supports this response?

  1. Interface traffic monitoring displays changing packet and byte rates to help diagnose congestion.
  2. Detailed route output provides attributes that help explain why a particular path is selected.
  3. An orderly power-off command prepares the operating system for controlled removal of power.
  4. Commit history records previous configuration-change events and associated user or time details.

Explanation

Correct Answer

A:

Interface traffic monitoring displays changing packet and byte rates to help diagnose congestion. This meets the stated need for live interface traffic rates.

Incorrect Answers

B:

The detailed route attributes scenario has a different requirement: Detailed route output provides attributes that help explain why a particular path is selected. It does not directly meet the live interface traffic rates need in this question.

C:

The controlled device power-off scenario has a different requirement: An orderly power-off command prepares the operating system for controlled removal of power. It does not directly meet the live interface traffic rates need in this question.

D:

The inspect commit history scenario has a different requirement: Commit history records previous configuration-change events and associated user or time details. It does not directly meet the live interface traffic rates need in this question.

Question 724

Within Operational Monitoring and Maintenance, a technician selects this approach: Use monitor interface traffic on the supported Junos platform. Which original requirement or fault would most directly justify it?

  1. An uplink is congested and the engineer needs live interface traffic measurements.
  2. A route exists but the engineer needs its preference, protocol, and selection details.
  3. A chassis must be safely shut down before planned hardware replacement.
  4. A routing change began shortly after a configuration commit and the engineer needs author and time.

Explanation

Correct Answer

A:

Interface traffic monitoring displays changing packet and byte rates to help diagnose congestion. This meets the stated need for live interface traffic rates.

Incorrect Answers

B:

The detailed route attributes scenario has a different requirement: Detailed route output provides attributes that help explain why a particular path is selected. It does not directly meet the live interface traffic rates need in this question.

C:

The controlled device power-off scenario has a different requirement: An orderly power-off command prepares the operating system for controlled removal of power. It does not directly meet the live interface traffic rates need in this question.

D:

The inspect commit history scenario has a different requirement: Commit history records previous configuration-change events and associated user or time details. It does not directly meet the live interface traffic rates need in this question.

Question 725

A routing change began shortly after a configuration commit and the engineer needs author and time. Which configuration or troubleshooting action most directly meets the need?

  1. Run show system commit and correlate its entries with the incident window.
  2. Inspect show system processes extensive for CPU-intensive tasks.
  3. Run request system reboot at the authorized time and verify recovery.
  4. Run show route and examine the candidate and active route entries.

Explanation

Correct Answer

A:

Commit history records previous configuration-change events and associated user or time details. This meets the stated need for inspect commit history.

Incorrect Answers

B:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the inspect commit history need in this question.

C:

The controlled device reboot scenario has a different requirement: The reboot operation restarts the system and must be coordinated to manage service interruption. It does not directly meet the inspect commit history need in this question.

D:

The inspect routing table scenario has a different requirement: Show route exposes route destinations, protocol origins, preference, and next-hop information. It does not directly meet the inspect commit history need in this question.

Question 726

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Run show system commit and correlate its entries with the incident window. Which concept or operating procedure is best illustrated?

  1. Routing Engine process load
  2. Controlled device reboot
  3. Inspect routing table
  4. Inspect commit history

Explanation

Correct Answer

D:

Commit history records previous configuration-change events and associated user or time details. This meets the stated need for inspect commit history.

Incorrect Answers

A:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the inspect commit history need in this question.

B:

The controlled device reboot scenario has a different requirement: The reboot operation restarts the system and must be coordinated to manage service interruption. It does not directly meet the inspect commit history need in this question.

C:

The inspect routing table scenario has a different requirement: Show route exposes route destinations, protocol origins, preference, and next-hop information. It does not directly meet the inspect commit history need in this question.

Question 727

A routing change began shortly after a configuration commit and the engineer needs author and time. The proposed response is: Run show system commit and correlate its entries with the incident window. Which explanation most accurately supports this response?

  1. The process display helps identify software tasks consuming Routing Engine resources.
  2. Commit history records previous configuration-change events and associated user or time details.
  3. The reboot operation restarts the system and must be coordinated to manage service interruption.
  4. Show route exposes route destinations, protocol origins, preference, and next-hop information.

Explanation

Correct Answer

B:

Commit history records previous configuration-change events and associated user or time details. This meets the stated need for inspect commit history.

Incorrect Answers

A:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the inspect commit history need in this question.

C:

The controlled device reboot scenario has a different requirement: The reboot operation restarts the system and must be coordinated to manage service interruption. It does not directly meet the inspect commit history need in this question.

D:

The inspect routing table scenario has a different requirement: Show route exposes route destinations, protocol origins, preference, and next-hop information. It does not directly meet the inspect commit history need in this question.

Question 728

Within Operational Monitoring and Maintenance, a technician selects this approach: Run show system commit and correlate its entries with the incident window. Which original requirement or fault would most directly justify it?

  1. SSH feels slow and an engineer suspects excessive CPU use by Junos processes.
  2. A post-upgrade step requires restarting a Junos router under an approved maintenance plan.
  3. Traffic appears to take the wrong route and an engineer wants to see active destination routes.
  4. A routing change began shortly after a configuration commit and the engineer needs author and time.

Explanation

Correct Answer

D:

Commit history records previous configuration-change events and associated user or time details. This meets the stated need for inspect commit history.

Incorrect Answers

A:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the inspect commit history need in this question.

B:

The controlled device reboot scenario has a different requirement: The reboot operation restarts the system and must be coordinated to manage service interruption. It does not directly meet the inspect commit history need in this question.

C:

The inspect routing table scenario has a different requirement: Show route exposes route destinations, protocol origins, preference, and next-hop information. It does not directly meet the inspect commit history need in this question.

Question 729

A support engineer needs a concise text export of effective configuration statements for a ticket. Which configuration or troubleshooting action most directly meets the need?

  1. Run show configuration | display set in operational mode.
  2. Use monitor start messages in the operational CLI.
  3. Run file list /var/log in operational mode.
  4. Follow Juniper's documented console-based root-password recovery procedure for the exact platform.

Explanation

Correct Answer

A:

Displaying configuration as set commands makes hierarchy statements easier to search and compare. This meets the stated need for display configuration as set.

Incorrect Answers

B:

The live system log monitor scenario has a different requirement: Monitor start follows updates to the selected log file so new events become visible promptly. It does not directly meet the display configuration as set need in this question.

C:

The list log directory files scenario has a different requirement: Listing the log directory identifies log files available for further inspection. It does not directly meet the display configuration as set need in this question.

D:

The console password recovery scenario has a different requirement: Password recovery is a controlled maintenance workflow requiring console access and platform-specific recovery steps. It does not directly meet the display configuration as set need in this question.

Question 730

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Run show configuration | display set in operational mode. Which concept or operating procedure is best illustrated?

  1. Live system log monitor
  2. List log directory files
  3. Display configuration as set
  4. Console password recovery

Explanation

Correct Answer

C:

Displaying configuration as set commands makes hierarchy statements easier to search and compare. This meets the stated need for display configuration as set.

Incorrect Answers

A:

The live system log monitor scenario has a different requirement: Monitor start follows updates to the selected log file so new events become visible promptly. It does not directly meet the display configuration as set need in this question.

B:

The list log directory files scenario has a different requirement: Listing the log directory identifies log files available for further inspection. It does not directly meet the display configuration as set need in this question.

D:

The console password recovery scenario has a different requirement: Password recovery is a controlled maintenance workflow requiring console access and platform-specific recovery steps. It does not directly meet the display configuration as set need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests