McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 71

Question 700

Within Operational Monitoring and Maintenance, a technician selects this approach: Inspect show ethernet-switching table for VLAN and MAC-to-port entries on supported devices. Which original requirement or fault would most directly justify it?

  1. A technician needs to identify the remote peer of an uplink using locally documented labels.
  2. An operator needs to verify that a destination IPv4 address responds at the IP layer.
  3. Traffic to a workstation floods unexpectedly and the switch may not be learning the host MAC.
  4. A router can ping some local IPv6 peers but not a newly connected neighbor.

Explanation

Correct Answer

C:

The Ethernet switching table reveals learned source MAC addresses and egress port associations. This meets the stated need for ethernet mac learning table.

Incorrect Answers

A:

The inspect interface description scenario has a different requirement: Interface descriptions provide human-maintained connectivity hints alongside live link status. It does not directly meet the ethernet mac learning table need in this question.

B:

The ping target reachability scenario has a different requirement: Ping uses echo requests to test IP reachability and estimate round-trip timing. It does not directly meet the ethernet mac learning table need in this question.

D:

The ipv6 neighbor table scenario has a different requirement: The IPv6 neighbor table exposes addresses learned through Neighbor Discovery. It does not directly meet the ethernet mac learning table need in this question.

Question 701

A fiber uplink shows intermittent packet corruption with no routing adjacency drop. Which configuration or troubleshooting action most directly meets the need?

  1. Run show system users to identify active user logins.
  2. Inspect interface input and output error counters and physical status.
  3. Inspect show system processes extensive for CPU-intensive tasks.
  4. Run show system commit and correlate its entries with the incident window.

Explanation

Correct Answer

B:

Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses. This meets the stated need for interface packet-error counters.

Incorrect Answers

A:

The logged-in user sessions scenario has a different requirement: The user-session display lists accounts currently connected to the device. It does not directly meet the interface packet-error counters need in this question.

C:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the interface packet-error counters need in this question.

D:

The inspect commit history scenario has a different requirement: Commit history records previous configuration-change events and associated user or time details. It does not directly meet the interface packet-error counters need in this question.

Question 702

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Inspect interface input and output error counters and physical status. Which concept or operating procedure is best illustrated?

  1. Logged-in user sessions
  2. Routing Engine process load
  3. Inspect commit history
  4. Interface packet-error counters

Explanation

Correct Answer

D:

Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses. This meets the stated need for interface packet-error counters.

Incorrect Answers

A:

The logged-in user sessions scenario has a different requirement: The user-session display lists accounts currently connected to the device. It does not directly meet the interface packet-error counters need in this question.

B:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the interface packet-error counters need in this question.

C:

The inspect commit history scenario has a different requirement: Commit history records previous configuration-change events and associated user or time details. It does not directly meet the interface packet-error counters need in this question.

Question 703

A fiber uplink shows intermittent packet corruption with no routing adjacency drop. The proposed response is: Inspect interface input and output error counters and physical status. Which explanation most accurately supports this response?

  1. The user-session display lists accounts currently connected to the device.
  2. Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses.
  3. The process display helps identify software tasks consuming Routing Engine resources.
  4. Commit history records previous configuration-change events and associated user or time details.

Explanation

Correct Answer

B:

Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses. This meets the stated need for interface packet-error counters.

Incorrect Answers

A:

The logged-in user sessions scenario has a different requirement: The user-session display lists accounts currently connected to the device. It does not directly meet the interface packet-error counters need in this question.

C:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the interface packet-error counters need in this question.

D:

The inspect commit history scenario has a different requirement: Commit history records previous configuration-change events and associated user or time details. It does not directly meet the interface packet-error counters need in this question.

Question 704

Within Operational Monitoring and Maintenance, a technician selects this approach: Inspect interface input and output error counters and physical status. Which original requirement or fault would most directly justify it?

  1. A change window begins and the lead needs to know who currently has an interactive session.
  2. A fiber uplink shows intermittent packet corruption with no routing adjacency drop.
  3. SSH feels slow and an engineer suspects excessive CPU use by Junos processes.
  4. A routing change began shortly after a configuration commit and the engineer needs author and time.

Explanation

Correct Answer

B:

Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses. This meets the stated need for interface packet-error counters.

Incorrect Answers

A:

The logged-in user sessions scenario has a different requirement: The user-session display lists accounts currently connected to the device. It does not directly meet the interface packet-error counters need in this question.

C:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the interface packet-error counters need in this question.

D:

The inspect commit history scenario has a different requirement: Commit history records previous configuration-change events and associated user or time details. It does not directly meet the interface packet-error counters need in this question.

Question 705

An operator needs to verify that a destination IPv4 address responds at the IP layer. Which configuration or troubleshooting action most directly meets the need?

  1. Run show route and examine the candidate and active route entries.
  2. Inspect show system processes extensive for CPU-intensive tasks.
  3. Inspect show ethernet-switching table for VLAN and MAC-to-port entries on supported devices.
  4. Run ping to the destination and inspect echo reply loss and latency.

Explanation

Correct Answer

D:

Ping uses echo requests to test IP reachability and estimate round-trip timing. This meets the stated need for ping target reachability.

Incorrect Answers

A:

The inspect routing table scenario has a different requirement: Show route exposes route destinations, protocol origins, preference, and next-hop information. It does not directly meet the ping target reachability need in this question.

B:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the ping target reachability need in this question.

C:

The ethernet mac learning table scenario has a different requirement: The Ethernet switching table reveals learned source MAC addresses and egress port associations. It does not directly meet the ping target reachability need in this question.

Question 706

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Run ping to the destination and inspect echo reply loss and latency. Which concept or operating procedure is best illustrated?

  1. Inspect routing table
  2. Ping target reachability
  3. Routing Engine process load
  4. Ethernet MAC learning table

Explanation

Correct Answer

B:

Ping uses echo requests to test IP reachability and estimate round-trip timing. This meets the stated need for ping target reachability.

Incorrect Answers

A:

The inspect routing table scenario has a different requirement: Show route exposes route destinations, protocol origins, preference, and next-hop information. It does not directly meet the ping target reachability need in this question.

C:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the ping target reachability need in this question.

D:

The ethernet mac learning table scenario has a different requirement: The Ethernet switching table reveals learned source MAC addresses and egress port associations. It does not directly meet the ping target reachability need in this question.

Question 707

An operator needs to verify that a destination IPv4 address responds at the IP layer. The proposed response is: Run ping to the destination and inspect echo reply loss and latency. Which explanation most accurately supports this response?

  1. Show route exposes route destinations, protocol origins, preference, and next-hop information.
  2. Ping uses echo requests to test IP reachability and estimate round-trip timing.
  3. The process display helps identify software tasks consuming Routing Engine resources.
  4. The Ethernet switching table reveals learned source MAC addresses and egress port associations.

Explanation

Correct Answer

B:

Ping uses echo requests to test IP reachability and estimate round-trip timing. This meets the stated need for ping target reachability.

Incorrect Answers

A:

The inspect routing table scenario has a different requirement: Show route exposes route destinations, protocol origins, preference, and next-hop information. It does not directly meet the ping target reachability need in this question.

C:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the ping target reachability need in this question.

D:

The ethernet mac learning table scenario has a different requirement: The Ethernet switching table reveals learned source MAC addresses and egress port associations. It does not directly meet the ping target reachability need in this question.

Question 708

Within Operational Monitoring and Maintenance, a technician selects this approach: Run ping to the destination and inspect echo reply loss and latency. Which original requirement or fault would most directly justify it?

  1. Traffic appears to take the wrong route and an engineer wants to see active destination routes.
  2. SSH feels slow and an engineer suspects excessive CPU use by Junos processes.
  3. An operator needs to verify that a destination IPv4 address responds at the IP layer.
  4. Traffic to a workstation floods unexpectedly and the switch may not be learning the host MAC.

Explanation

Correct Answer

C:

Ping uses echo requests to test IP reachability and estimate round-trip timing. This meets the stated need for ping target reachability.

Incorrect Answers

A:

The inspect routing table scenario has a different requirement: Show route exposes route destinations, protocol origins, preference, and next-hop information. It does not directly meet the ping target reachability need in this question.

B:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the ping target reachability need in this question.

D:

The ethernet mac learning table scenario has a different requirement: The Ethernet switching table reveals learned source MAC addresses and egress port associations. It does not directly meet the ping target reachability need in this question.

Question 709

A remote destination is unreachable and the team must identify the point at which path responses stop. Which configuration or troubleshooting action most directly meets the need?

  1. Run request system power-off where supported and follow the platform's shutdown procedure.
  2. Run traceroute to observe responses from successive hops where permitted.
  3. Run show system users to identify active user logins.
  4. Use show log messages and filter for the relevant service or time.

Explanation

Correct Answer

B:

Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. This meets the stated need for traceroute intermediate hops.

Incorrect Answers

A:

The controlled device power-off scenario has a different requirement: An orderly power-off command prepares the operating system for controlled removal of power. It does not directly meet the traceroute intermediate hops need in this question.

C:

The logged-in user sessions scenario has a different requirement: The user-session display lists accounts currently connected to the device. It does not directly meet the traceroute intermediate hops need in this question.

D:

The read primary system log scenario has a different requirement: The messages log records selected system events and process notices for later investigation. It does not directly meet the traceroute intermediate hops need in this question.

Question 710

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Run traceroute to observe responses from successive hops where permitted. Which concept or operating procedure is best illustrated?

  1. Controlled device power-off
  2. Logged-in user sessions
  3. Traceroute intermediate hops
  4. Read primary system log

Explanation

Correct Answer

C:

Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. This meets the stated need for traceroute intermediate hops.

Incorrect Answers

A:

The controlled device power-off scenario has a different requirement: An orderly power-off command prepares the operating system for controlled removal of power. It does not directly meet the traceroute intermediate hops need in this question.

B:

The logged-in user sessions scenario has a different requirement: The user-session display lists accounts currently connected to the device. It does not directly meet the traceroute intermediate hops need in this question.

D:

The read primary system log scenario has a different requirement: The messages log records selected system events and process notices for later investigation. It does not directly meet the traceroute intermediate hops need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests