McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 72

Question 710

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Run traceroute to observe responses from successive hops where permitted. Which concept or operating procedure is best illustrated?

  1. Controlled device power-off
  2. Logged-in user sessions
  3. Traceroute intermediate hops
  4. Read primary system log

Explanation

Correct Answer

C:

Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. This meets the stated need for traceroute intermediate hops.

Incorrect Answers

A:

The controlled device power-off scenario has a different requirement: An orderly power-off command prepares the operating system for controlled removal of power. It does not directly meet the traceroute intermediate hops need in this question.

B:

The logged-in user sessions scenario has a different requirement: The user-session display lists accounts currently connected to the device. It does not directly meet the traceroute intermediate hops need in this question.

D:

The read primary system log scenario has a different requirement: The messages log records selected system events and process notices for later investigation. It does not directly meet the traceroute intermediate hops need in this question.

Question 711

A remote destination is unreachable and the team must identify the point at which path responses stop. The proposed response is: Run traceroute to observe responses from successive hops where permitted. Which explanation most accurately supports this response?

  1. An orderly power-off command prepares the operating system for controlled removal of power.
  2. Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path.
  3. The user-session display lists accounts currently connected to the device.
  4. The messages log records selected system events and process notices for later investigation.

Explanation

Correct Answer

B:

Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. This meets the stated need for traceroute intermediate hops.

Incorrect Answers

A:

The controlled device power-off scenario has a different requirement: An orderly power-off command prepares the operating system for controlled removal of power. It does not directly meet the traceroute intermediate hops need in this question.

C:

The logged-in user sessions scenario has a different requirement: The user-session display lists accounts currently connected to the device. It does not directly meet the traceroute intermediate hops need in this question.

D:

The read primary system log scenario has a different requirement: The messages log records selected system events and process notices for later investigation. It does not directly meet the traceroute intermediate hops need in this question.

Question 712

Within Operational Monitoring and Maintenance, a technician selects this approach: Run traceroute to observe responses from successive hops where permitted. Which original requirement or fault would most directly justify it?

  1. A remote destination is unreachable and the team must identify the point at which path responses stop.
  2. A chassis must be safely shut down before planned hardware replacement.
  3. A change window begins and the lead needs to know who currently has an interactive session.
  4. A routing restart occurred overnight and the engineer wants its messages from the standard device log.

Explanation

Correct Answer

A:

Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. This meets the stated need for traceroute intermediate hops.

Incorrect Answers

B:

The controlled device power-off scenario has a different requirement: An orderly power-off command prepares the operating system for controlled removal of power. It does not directly meet the traceroute intermediate hops need in this question.

C:

The logged-in user sessions scenario has a different requirement: The user-session display lists accounts currently connected to the device. It does not directly meet the traceroute intermediate hops need in this question.

D:

The read primary system log scenario has a different requirement: The messages log records selected system events and process notices for later investigation. It does not directly meet the traceroute intermediate hops need in this question.

Question 713

Management packets reach an adjacent device but operators need to confirm remote CLI login works. Which configuration or troubleshooting action most directly meets the need?

  1. Run show chassis alarms to identify active chassis-related alarm conditions.
  2. Run show arp to verify the neighbor IP-to-MAC mappings.
  3. Inspect show ethernet-switching table for VLAN and MAC-to-port entries on supported devices.
  4. Attempt an authorized SSH connection to the target management address.

Explanation

Correct Answer

D:

SSH tests encrypted management connectivity and authenticates a remote interactive CLI session. This meets the stated need for test remote ssh connectivity.

Incorrect Answers

A:

The chassis hardware alarms scenario has a different requirement: Chassis alarm output summarizes hardware platform conditions such as supported fan, power, or environmental faults. It does not directly meet the test remote ssh connectivity need in this question.

B:

The ipv4 arp neighbors scenario has a different requirement: The ARP table reveals resolved IPv4 neighbors and associated link-layer addresses. It does not directly meet the test remote ssh connectivity need in this question.

C:

The ethernet mac learning table scenario has a different requirement: The Ethernet switching table reveals learned source MAC addresses and egress port associations. It does not directly meet the test remote ssh connectivity need in this question.

Question 714

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Attempt an authorized SSH connection to the target management address. Which concept or operating procedure is best illustrated?

  1. Test remote SSH connectivity
  2. Chassis hardware alarms
  3. IPv4 ARP neighbors
  4. Ethernet MAC learning table

Explanation

Correct Answer

A:

SSH tests encrypted management connectivity and authenticates a remote interactive CLI session. This meets the stated need for test remote ssh connectivity.

Incorrect Answers

B:

The chassis hardware alarms scenario has a different requirement: Chassis alarm output summarizes hardware platform conditions such as supported fan, power, or environmental faults. It does not directly meet the test remote ssh connectivity need in this question.

C:

The ipv4 arp neighbors scenario has a different requirement: The ARP table reveals resolved IPv4 neighbors and associated link-layer addresses. It does not directly meet the test remote ssh connectivity need in this question.

D:

The ethernet mac learning table scenario has a different requirement: The Ethernet switching table reveals learned source MAC addresses and egress port associations. It does not directly meet the test remote ssh connectivity need in this question.

Question 715

Management packets reach an adjacent device but operators need to confirm remote CLI login works. The proposed response is: Attempt an authorized SSH connection to the target management address. Which explanation most accurately supports this response?

  1. Chassis alarm output summarizes hardware platform conditions such as supported fan, power, or environmental faults.
  2. The ARP table reveals resolved IPv4 neighbors and associated link-layer addresses.
  3. The Ethernet switching table reveals learned source MAC addresses and egress port associations.
  4. SSH tests encrypted management connectivity and authenticates a remote interactive CLI session.

Explanation

Correct Answer

D:

SSH tests encrypted management connectivity and authenticates a remote interactive CLI session. This meets the stated need for test remote ssh connectivity.

Incorrect Answers

A:

The chassis hardware alarms scenario has a different requirement: Chassis alarm output summarizes hardware platform conditions such as supported fan, power, or environmental faults. It does not directly meet the test remote ssh connectivity need in this question.

B:

The ipv4 arp neighbors scenario has a different requirement: The ARP table reveals resolved IPv4 neighbors and associated link-layer addresses. It does not directly meet the test remote ssh connectivity need in this question.

C:

The ethernet mac learning table scenario has a different requirement: The Ethernet switching table reveals learned source MAC addresses and egress port associations. It does not directly meet the test remote ssh connectivity need in this question.

Question 716

Within Operational Monitoring and Maintenance, a technician selects this approach: Attempt an authorized SSH connection to the target management address. Which original requirement or fault would most directly justify it?

  1. A router reports a red hardware alarm after a fan failure.
  2. An IPv4 host is unreachable on a directly attached Ethernet subnet despite a correct route.
  3. Traffic to a workstation floods unexpectedly and the switch may not be learning the host MAC.
  4. Management packets reach an adjacent device but operators need to confirm remote CLI login works.

Explanation

Correct Answer

D:

SSH tests encrypted management connectivity and authenticates a remote interactive CLI session. This meets the stated need for test remote ssh connectivity.

Incorrect Answers

A:

The chassis hardware alarms scenario has a different requirement: Chassis alarm output summarizes hardware platform conditions such as supported fan, power, or environmental faults. It does not directly meet the test remote ssh connectivity need in this question.

B:

The ipv4 arp neighbors scenario has a different requirement: The ARP table reveals resolved IPv4 neighbors and associated link-layer addresses. It does not directly meet the test remote ssh connectivity need in this question.

C:

The ethernet mac learning table scenario has a different requirement: The Ethernet switching table reveals learned source MAC addresses and egress port associations. It does not directly meet the test remote ssh connectivity need in this question.

Question 717

A packet-level mismatch requires inspecting traffic as it enters an interface on a lab device. Which configuration or troubleshooting action most directly meets the need?

  1. Inspect interface input and output error counters and physical status.
  2. Use monitor traffic interface with appropriate capture scope and safety controls.
  3. Run traceroute to observe responses from successive hops where permitted.
  4. Run show interfaces terse and inspect the relevant interface entries.

Explanation

Correct Answer

B:

Packet capture can reveal protocol headers and observed packet direction for troubleshooting. This meets the stated need for capture interface packets.

Incorrect Answers

A:

The interface packet-error counters scenario has a different requirement: Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses. It does not directly meet the capture interface packets need in this question.

C:

The traceroute intermediate hops scenario has a different requirement: Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. It does not directly meet the capture interface packets need in this question.

D:

The show interface terse status scenario has a different requirement: The terse interface command summarizes interface states and logical address information without full detail. It does not directly meet the capture interface packets need in this question.

Question 718

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Use monitor traffic interface with appropriate capture scope and safety controls. Which concept or operating procedure is best illustrated?

  1. Interface packet-error counters
  2. Capture interface packets
  3. Traceroute intermediate hops
  4. Show interface terse status

Explanation

Correct Answer

B:

Packet capture can reveal protocol headers and observed packet direction for troubleshooting. This meets the stated need for capture interface packets.

Incorrect Answers

A:

The interface packet-error counters scenario has a different requirement: Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses. It does not directly meet the capture interface packets need in this question.

C:

The traceroute intermediate hops scenario has a different requirement: Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. It does not directly meet the capture interface packets need in this question.

D:

The show interface terse status scenario has a different requirement: The terse interface command summarizes interface states and logical address information without full detail. It does not directly meet the capture interface packets need in this question.

Question 719

A packet-level mismatch requires inspecting traffic as it enters an interface on a lab device. The proposed response is: Use monitor traffic interface with appropriate capture scope and safety controls. Which explanation most accurately supports this response?

  1. Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses.
  2. Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path.
  3. The terse interface command summarizes interface states and logical address information without full detail.
  4. Packet capture can reveal protocol headers and observed packet direction for troubleshooting.

Explanation

Correct Answer

D:

Packet capture can reveal protocol headers and observed packet direction for troubleshooting. This meets the stated need for capture interface packets.

Incorrect Answers

A:

The interface packet-error counters scenario has a different requirement: Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses. It does not directly meet the capture interface packets need in this question.

B:

The traceroute intermediate hops scenario has a different requirement: Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. It does not directly meet the capture interface packets need in this question.

C:

The show interface terse status scenario has a different requirement: The terse interface command summarizes interface states and logical address information without full detail. It does not directly meet the capture interface packets need in this question.

Question 720

Within Operational Monitoring and Maintenance, a technician selects this approach: Use monitor traffic interface with appropriate capture scope and safety controls. Which original requirement or fault would most directly justify it?

  1. A fiber uplink shows intermittent packet corruption with no routing adjacency drop.
  2. A remote destination is unreachable and the team must identify the point at which path responses stop.
  3. A packet-level mismatch requires inspecting traffic as it enters an interface on a lab device.
  4. An operator needs a quick table of port administrative state, link state, and configured IP addresses.

Explanation

Correct Answer

C:

Packet capture can reveal protocol headers and observed packet direction for troubleshooting. This meets the stated need for capture interface packets.

Incorrect Answers

A:

The interface packet-error counters scenario has a different requirement: Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses. It does not directly meet the capture interface packets need in this question.

B:

The traceroute intermediate hops scenario has a different requirement: Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. It does not directly meet the capture interface packets need in this question.

D:

The show interface terse status scenario has a different requirement: The terse interface command summarizes interface states and logical address information without full detail. It does not directly meet the capture interface packets need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests