McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 75

Question 740

Within Operational Monitoring and Maintenance, a technician selects this approach: Run request system reboot at the authorized time and verify recovery. Which original requirement or fault would most directly justify it?

  1. Traffic to a workstation floods unexpectedly and the switch may not be learning the host MAC.
  2. A post-upgrade step requires restarting a Junos router under an approved maintenance plan.
  3. A chassis must be safely shut down before planned hardware replacement.
  4. A technician needs to identify the remote peer of an uplink using locally documented labels.

Explanation

Correct Answer

B:

The reboot operation restarts the system and must be coordinated to manage service interruption. This meets the stated need for controlled device reboot.

Incorrect Answers

A:

The ethernet mac learning table scenario has a different requirement: The Ethernet switching table reveals learned source MAC addresses and egress port associations. It does not directly meet the controlled device reboot need in this question.

C:

The controlled device power-off scenario has a different requirement: An orderly power-off command prepares the operating system for controlled removal of power. It does not directly meet the controlled device reboot need in this question.

D:

The inspect interface description scenario has a different requirement: Interface descriptions provide human-maintained connectivity hints alongside live link status. It does not directly meet the controlled device reboot need in this question.

Question 741

A chassis must be safely shut down before planned hardware replacement. Which configuration or troubleshooting action most directly meets the need?

  1. Run request system reboot at the authorized time and verify recovery.
  2. Run show interfaces extensive for the affected interface.
  3. Run request system power-off where supported and follow the platform's shutdown procedure.
  4. Use request system configuration rescue save after verifying the current configuration.

Explanation

Correct Answer

C:

An orderly power-off command prepares the operating system for controlled removal of power. This meets the stated need for controlled device power-off.

Incorrect Answers

A:

The controlled device reboot scenario has a different requirement: The reboot operation restarts the system and must be coordinated to manage service interruption. It does not directly meet the controlled device power-off need in this question.

B:

The show interface extensive errors scenario has a different requirement: Extensive interface output includes detailed operational attributes and counters useful for troubleshooting. It does not directly meet the controlled device power-off need in this question.

D:

The save rescue baseline scenario has a different requirement: The rescue-save operation retains a known-good baseline for later recovery. It does not directly meet the controlled device power-off need in this question.

Question 742

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Run request system power-off where supported and follow the platform's shutdown procedure. Which concept or operating procedure is best illustrated?

  1. Controlled device reboot
  2. Show interface extensive errors
  3. Save rescue baseline
  4. Controlled device power-off

Explanation

Correct Answer

D:

An orderly power-off command prepares the operating system for controlled removal of power. This meets the stated need for controlled device power-off.

Incorrect Answers

A:

The controlled device reboot scenario has a different requirement: The reboot operation restarts the system and must be coordinated to manage service interruption. It does not directly meet the controlled device power-off need in this question.

B:

The show interface extensive errors scenario has a different requirement: Extensive interface output includes detailed operational attributes and counters useful for troubleshooting. It does not directly meet the controlled device power-off need in this question.

C:

The save rescue baseline scenario has a different requirement: The rescue-save operation retains a known-good baseline for later recovery. It does not directly meet the controlled device power-off need in this question.

Question 743

A chassis must be safely shut down before planned hardware replacement. The proposed response is: Run request system power-off where supported and follow the platform's shutdown procedure. Which explanation most accurately supports this response?

  1. An orderly power-off command prepares the operating system for controlled removal of power.
  2. The reboot operation restarts the system and must be coordinated to manage service interruption.
  3. Extensive interface output includes detailed operational attributes and counters useful for troubleshooting.
  4. The rescue-save operation retains a known-good baseline for later recovery.

Explanation

Correct Answer

A:

An orderly power-off command prepares the operating system for controlled removal of power. This meets the stated need for controlled device power-off.

Incorrect Answers

B:

The controlled device reboot scenario has a different requirement: The reboot operation restarts the system and must be coordinated to manage service interruption. It does not directly meet the controlled device power-off need in this question.

C:

The show interface extensive errors scenario has a different requirement: Extensive interface output includes detailed operational attributes and counters useful for troubleshooting. It does not directly meet the controlled device power-off need in this question.

D:

The save rescue baseline scenario has a different requirement: The rescue-save operation retains a known-good baseline for later recovery. It does not directly meet the controlled device power-off need in this question.

Question 744

Within Operational Monitoring and Maintenance, a technician selects this approach: Run request system power-off where supported and follow the platform's shutdown procedure. Which original requirement or fault would most directly justify it?

  1. A post-upgrade step requires restarting a Junos router under an approved maintenance plan.
  2. A link is up but traffic is failing and the operator needs detailed counters and interface flags.
  3. A working configuration was validated and a field technician wants a recovery point.
  4. A chassis must be safely shut down before planned hardware replacement.

Explanation

Correct Answer

D:

An orderly power-off command prepares the operating system for controlled removal of power. This meets the stated need for controlled device power-off.

Incorrect Answers

A:

The controlled device reboot scenario has a different requirement: The reboot operation restarts the system and must be coordinated to manage service interruption. It does not directly meet the controlled device power-off need in this question.

B:

The show interface extensive errors scenario has a different requirement: Extensive interface output includes detailed operational attributes and counters useful for troubleshooting. It does not directly meet the controlled device power-off need in this question.

C:

The save rescue baseline scenario has a different requirement: The rescue-save operation retains a known-good baseline for later recovery. It does not directly meet the controlled device power-off need in this question.

Question 745

A working configuration was validated and a field technician wants a recovery point. Which configuration or troubleshooting action most directly meets the need?

  1. Use request system configuration rescue save after verifying the current configuration.
  2. Use monitor interface traffic on the supported Junos platform.
  3. Inspect show system processes extensive for CPU-intensive tasks.
  4. Run ping to the destination and inspect echo reply loss and latency.

Explanation

Correct Answer

A:

The rescue-save operation retains a known-good baseline for later recovery. This meets the stated need for save rescue baseline.

Incorrect Answers

B:

The live interface traffic rates scenario has a different requirement: Interface traffic monitoring displays changing packet and byte rates to help diagnose congestion. It does not directly meet the save rescue baseline need in this question.

C:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the save rescue baseline need in this question.

D:

The ping target reachability scenario has a different requirement: Ping uses echo requests to test IP reachability and estimate round-trip timing. It does not directly meet the save rescue baseline need in this question.

Question 746

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Use request system configuration rescue save after verifying the current configuration. Which concept or operating procedure is best illustrated?

  1. Live interface traffic rates
  2. Save rescue baseline
  3. Routing Engine process load
  4. Ping target reachability

Explanation

Correct Answer

B:

The rescue-save operation retains a known-good baseline for later recovery. This meets the stated need for save rescue baseline.

Incorrect Answers

A:

The live interface traffic rates scenario has a different requirement: Interface traffic monitoring displays changing packet and byte rates to help diagnose congestion. It does not directly meet the save rescue baseline need in this question.

C:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the save rescue baseline need in this question.

D:

The ping target reachability scenario has a different requirement: Ping uses echo requests to test IP reachability and estimate round-trip timing. It does not directly meet the save rescue baseline need in this question.

Question 747

A working configuration was validated and a field technician wants a recovery point. The proposed response is: Use request system configuration rescue save after verifying the current configuration. Which explanation most accurately supports this response?

  1. Interface traffic monitoring displays changing packet and byte rates to help diagnose congestion.
  2. The process display helps identify software tasks consuming Routing Engine resources.
  3. Ping uses echo requests to test IP reachability and estimate round-trip timing.
  4. The rescue-save operation retains a known-good baseline for later recovery.

Explanation

Correct Answer

D:

The rescue-save operation retains a known-good baseline for later recovery. This meets the stated need for save rescue baseline.

Incorrect Answers

A:

The live interface traffic rates scenario has a different requirement: Interface traffic monitoring displays changing packet and byte rates to help diagnose congestion. It does not directly meet the save rescue baseline need in this question.

B:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the save rescue baseline need in this question.

C:

The ping target reachability scenario has a different requirement: Ping uses echo requests to test IP reachability and estimate round-trip timing. It does not directly meet the save rescue baseline need in this question.

Question 748

Within Operational Monitoring and Maintenance, a technician selects this approach: Use request system configuration rescue save after verifying the current configuration. Which original requirement or fault would most directly justify it?

  1. An uplink is congested and the engineer needs live interface traffic measurements.
  2. SSH feels slow and an engineer suspects excessive CPU use by Junos processes.
  3. A working configuration was validated and a field technician wants a recovery point.
  4. An operator needs to verify that a destination IPv4 address responds at the IP layer.

Explanation

Correct Answer

C:

The rescue-save operation retains a known-good baseline for later recovery. This meets the stated need for save rescue baseline.

Incorrect Answers

A:

The live interface traffic rates scenario has a different requirement: Interface traffic monitoring displays changing packet and byte rates to help diagnose congestion. It does not directly meet the save rescue baseline need in this question.

B:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the save rescue baseline need in this question.

D:

The ping target reachability scenario has a different requirement: Ping uses echo requests to test IP reachability and estimate round-trip timing. It does not directly meet the save rescue baseline need in this question.

Question 749

A vendor support case requests a broad diagnostic bundle from the router. Which configuration or troubleshooting action most directly meets the need?

  1. Run request support information, or the supported platform equivalent, with sensitive-data handling.
  2. Use request system configuration rescue save after verifying the current configuration.
  3. Use monitor interface traffic on the supported Junos platform.
  4. Check show system storage to inspect filesystem capacity and usage.

Explanation

Correct Answer

A:

The support-information command collects varied operational details to aid vendor troubleshooting. This meets the stated need for collect support diagnostics.

Incorrect Answers

B:

The save rescue baseline scenario has a different requirement: The rescue-save operation retains a known-good baseline for later recovery. It does not directly meet the collect support diagnostics need in this question.

C:

The live interface traffic rates scenario has a different requirement: Interface traffic monitoring displays changing packet and byte rates to help diagnose congestion. It does not directly meet the collect support diagnostics need in this question.

D:

The local storage usage scenario has a different requirement: System storage output shows mounted filesystem space, helping identify whether filesystems are full. It does not directly meet the collect support diagnostics need in this question.

Question 750

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Run request support information, or the supported platform equivalent, with sensitive-data handling. Which concept or operating procedure is best illustrated?

  1. Save rescue baseline
  2. Collect support diagnostics
  3. Live interface traffic rates
  4. Local storage usage

Explanation

Correct Answer

B:

The support-information command collects varied operational details to aid vendor troubleshooting. This meets the stated need for collect support diagnostics.

Incorrect Answers

A:

The save rescue baseline scenario has a different requirement: The rescue-save operation retains a known-good baseline for later recovery. It does not directly meet the collect support diagnostics need in this question.

C:

The live interface traffic rates scenario has a different requirement: Interface traffic monitoring displays changing packet and byte rates to help diagnose congestion. It does not directly meet the collect support diagnostics need in this question.

D:

The local storage usage scenario has a different requirement: System storage output shows mounted filesystem space, helping identify whether filesystems are full. It does not directly meet the collect support diagnostics need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests