McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 70

Question 690

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Run show arp to verify the neighbor IP-to-MAC mappings. Which concept or operating procedure is best illustrated?

  1. IPv4 ARP neighbors
  2. Interface packet-error counters
  3. Live system log monitor
  4. System alarm inspection

Explanation

Correct Answer

A:

The ARP table reveals resolved IPv4 neighbors and associated link-layer addresses. This meets the stated need for ipv4 arp neighbors.

Incorrect Answers

B:

The interface packet-error counters scenario has a different requirement: Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses. It does not directly meet the ipv4 arp neighbors need in this question.

C:

The live system log monitor scenario has a different requirement: Monitor start follows updates to the selected log file so new events become visible promptly. It does not directly meet the ipv4 arp neighbors need in this question.

D:

The system alarm inspection scenario has a different requirement: System alarm output identifies active operating-system alarm conditions that need operational attention. It does not directly meet the ipv4 arp neighbors need in this question.

Question 691

An IPv4 host is unreachable on a directly attached Ethernet subnet despite a correct route. The proposed response is: Run show arp to verify the neighbor IP-to-MAC mappings. Which explanation most accurately supports this response?

  1. Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses.
  2. Monitor start follows updates to the selected log file so new events become visible promptly.
  3. System alarm output identifies active operating-system alarm conditions that need operational attention.
  4. The ARP table reveals resolved IPv4 neighbors and associated link-layer addresses.

Explanation

Correct Answer

D:

The ARP table reveals resolved IPv4 neighbors and associated link-layer addresses. This meets the stated need for ipv4 arp neighbors.

Incorrect Answers

A:

The interface packet-error counters scenario has a different requirement: Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses. It does not directly meet the ipv4 arp neighbors need in this question.

B:

The live system log monitor scenario has a different requirement: Monitor start follows updates to the selected log file so new events become visible promptly. It does not directly meet the ipv4 arp neighbors need in this question.

C:

The system alarm inspection scenario has a different requirement: System alarm output identifies active operating-system alarm conditions that need operational attention. It does not directly meet the ipv4 arp neighbors need in this question.

Question 692

Within Operational Monitoring and Maintenance, a technician selects this approach: Run show arp to verify the neighbor IP-to-MAC mappings. Which original requirement or fault would most directly justify it?

  1. A fiber uplink shows intermittent packet corruption with no routing adjacency drop.
  2. An incident responder needs to watch new system log entries appear during a maintenance test.
  3. An IPv4 host is unreachable on a directly attached Ethernet subnet despite a correct route.
  4. Administrators need to determine why the Junos system alarm indicator is active.

Explanation

Correct Answer

C:

The ARP table reveals resolved IPv4 neighbors and associated link-layer addresses. This meets the stated need for ipv4 arp neighbors.

Incorrect Answers

A:

The interface packet-error counters scenario has a different requirement: Interface errors and drops can identify link-quality or physical-layer problems that protocol state alone misses. It does not directly meet the ipv4 arp neighbors need in this question.

B:

The live system log monitor scenario has a different requirement: Monitor start follows updates to the selected log file so new events become visible promptly. It does not directly meet the ipv4 arp neighbors need in this question.

D:

The system alarm inspection scenario has a different requirement: System alarm output identifies active operating-system alarm conditions that need operational attention. It does not directly meet the ipv4 arp neighbors need in this question.

Question 693

A router can ping some local IPv6 peers but not a newly connected neighbor. Which configuration or troubleshooting action most directly meets the need?

  1. Inspect show system processes extensive for CPU-intensive tasks.
  2. Inspect show ipv6 neighbors for address-resolution and reachability state.
  3. Use monitor traffic interface with appropriate capture scope and safety controls.
  4. Run traceroute to observe responses from successive hops where permitted.

Explanation

Correct Answer

B:

The IPv6 neighbor table exposes addresses learned through Neighbor Discovery. This meets the stated need for ipv6 neighbor table.

Incorrect Answers

A:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the ipv6 neighbor table need in this question.

C:

The capture interface packets scenario has a different requirement: Packet capture can reveal protocol headers and observed packet direction for troubleshooting. It does not directly meet the ipv6 neighbor table need in this question.

D:

The traceroute intermediate hops scenario has a different requirement: Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. It does not directly meet the ipv6 neighbor table need in this question.

Question 694

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Inspect show ipv6 neighbors for address-resolution and reachability state. Which concept or operating procedure is best illustrated?

  1. Routing Engine process load
  2. Capture interface packets
  3. Traceroute intermediate hops
  4. IPv6 neighbor table

Explanation

Correct Answer

D:

The IPv6 neighbor table exposes addresses learned through Neighbor Discovery. This meets the stated need for ipv6 neighbor table.

Incorrect Answers

A:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the ipv6 neighbor table need in this question.

B:

The capture interface packets scenario has a different requirement: Packet capture can reveal protocol headers and observed packet direction for troubleshooting. It does not directly meet the ipv6 neighbor table need in this question.

C:

The traceroute intermediate hops scenario has a different requirement: Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. It does not directly meet the ipv6 neighbor table need in this question.

Question 695

A router can ping some local IPv6 peers but not a newly connected neighbor. The proposed response is: Inspect show ipv6 neighbors for address-resolution and reachability state. Which explanation most accurately supports this response?

  1. The IPv6 neighbor table exposes addresses learned through Neighbor Discovery.
  2. The process display helps identify software tasks consuming Routing Engine resources.
  3. Packet capture can reveal protocol headers and observed packet direction for troubleshooting.
  4. Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path.

Explanation

Correct Answer

A:

The IPv6 neighbor table exposes addresses learned through Neighbor Discovery. This meets the stated need for ipv6 neighbor table.

Incorrect Answers

B:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the ipv6 neighbor table need in this question.

C:

The capture interface packets scenario has a different requirement: Packet capture can reveal protocol headers and observed packet direction for troubleshooting. It does not directly meet the ipv6 neighbor table need in this question.

D:

The traceroute intermediate hops scenario has a different requirement: Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. It does not directly meet the ipv6 neighbor table need in this question.

Question 696

Within Operational Monitoring and Maintenance, a technician selects this approach: Inspect show ipv6 neighbors for address-resolution and reachability state. Which original requirement or fault would most directly justify it?

  1. SSH feels slow and an engineer suspects excessive CPU use by Junos processes.
  2. A packet-level mismatch requires inspecting traffic as it enters an interface on a lab device.
  3. A router can ping some local IPv6 peers but not a newly connected neighbor.
  4. A remote destination is unreachable and the team must identify the point at which path responses stop.

Explanation

Correct Answer

C:

The IPv6 neighbor table exposes addresses learned through Neighbor Discovery. This meets the stated need for ipv6 neighbor table.

Incorrect Answers

A:

The routing engine process load scenario has a different requirement: The process display helps identify software tasks consuming Routing Engine resources. It does not directly meet the ipv6 neighbor table need in this question.

B:

The capture interface packets scenario has a different requirement: Packet capture can reveal protocol headers and observed packet direction for troubleshooting. It does not directly meet the ipv6 neighbor table need in this question.

D:

The traceroute intermediate hops scenario has a different requirement: Traceroute varies packet TTL or hop limit to reveal responsive intermediate routers along a path. It does not directly meet the ipv6 neighbor table need in this question.

Question 697

Traffic to a workstation floods unexpectedly and the switch may not be learning the host MAC. Which configuration or troubleshooting action most directly meets the need?

  1. Run show interfaces descriptions or inspect the configured interface description.
  2. Run ping to the destination and inspect echo reply loss and latency.
  3. Inspect show ethernet-switching table for VLAN and MAC-to-port entries on supported devices.
  4. Inspect show ipv6 neighbors for address-resolution and reachability state.

Explanation

Correct Answer

C:

The Ethernet switching table reveals learned source MAC addresses and egress port associations. This meets the stated need for ethernet mac learning table.

Incorrect Answers

A:

The inspect interface description scenario has a different requirement: Interface descriptions provide human-maintained connectivity hints alongside live link status. It does not directly meet the ethernet mac learning table need in this question.

B:

The ping target reachability scenario has a different requirement: Ping uses echo requests to test IP reachability and estimate round-trip timing. It does not directly meet the ethernet mac learning table need in this question.

D:

The ipv6 neighbor table scenario has a different requirement: The IPv6 neighbor table exposes addresses learned through Neighbor Discovery. It does not directly meet the ethernet mac learning table need in this question.

Question 698

Within Operational Monitoring and Maintenance, a Junos engineer proposes the following response: Inspect show ethernet-switching table for VLAN and MAC-to-port entries on supported devices. Which concept or operating procedure is best illustrated?

  1. Inspect interface description
  2. Ping target reachability
  3. IPv6 neighbor table
  4. Ethernet MAC learning table

Explanation

Correct Answer

D:

The Ethernet switching table reveals learned source MAC addresses and egress port associations. This meets the stated need for ethernet mac learning table.

Incorrect Answers

A:

The inspect interface description scenario has a different requirement: Interface descriptions provide human-maintained connectivity hints alongside live link status. It does not directly meet the ethernet mac learning table need in this question.

B:

The ping target reachability scenario has a different requirement: Ping uses echo requests to test IP reachability and estimate round-trip timing. It does not directly meet the ethernet mac learning table need in this question.

C:

The ipv6 neighbor table scenario has a different requirement: The IPv6 neighbor table exposes addresses learned through Neighbor Discovery. It does not directly meet the ethernet mac learning table need in this question.

Question 699

Traffic to a workstation floods unexpectedly and the switch may not be learning the host MAC. The proposed response is: Inspect show ethernet-switching table for VLAN and MAC-to-port entries on supported devices. Which explanation most accurately supports this response?

  1. The Ethernet switching table reveals learned source MAC addresses and egress port associations.
  2. Interface descriptions provide human-maintained connectivity hints alongside live link status.
  3. Ping uses echo requests to test IP reachability and estimate round-trip timing.
  4. The IPv6 neighbor table exposes addresses learned through Neighbor Discovery.

Explanation

Correct Answer

A:

The Ethernet switching table reveals learned source MAC addresses and egress port associations. This meets the stated need for ethernet mac learning table.

Incorrect Answers

B:

The inspect interface description scenario has a different requirement: Interface descriptions provide human-maintained connectivity hints alongside live link status. It does not directly meet the ethernet mac learning table need in this question.

C:

The ping target reachability scenario has a different requirement: Ping uses echo requests to test IP reachability and estimate round-trip timing. It does not directly meet the ethernet mac learning table need in this question.

D:

The ipv6 neighbor table scenario has a different requirement: The IPv6 neighbor table exposes addresses learned through Neighbor Discovery. It does not directly meet the ethernet mac learning table need in this question.

Question 700

Within Operational Monitoring and Maintenance, a technician selects this approach: Inspect show ethernet-switching table for VLAN and MAC-to-port entries on supported devices. Which original requirement or fault would most directly justify it?

  1. A technician needs to identify the remote peer of an uplink using locally documented labels.
  2. An operator needs to verify that a destination IPv4 address responds at the IP layer.
  3. Traffic to a workstation floods unexpectedly and the switch may not be learning the host MAC.
  4. A router can ping some local IPv6 peers but not a newly connected neighbor.

Explanation

Correct Answer

C:

The Ethernet switching table reveals learned source MAC addresses and egress port associations. This meets the stated need for ethernet mac learning table.

Incorrect Answers

A:

The inspect interface description scenario has a different requirement: Interface descriptions provide human-maintained connectivity hints alongside live link status. It does not directly meet the ethernet mac learning table need in this question.

B:

The ping target reachability scenario has a different requirement: Ping uses echo requests to test IP reachability and estimate round-trip timing. It does not directly meet the ethernet mac learning table need in this question.

D:

The ipv6 neighbor table scenario has a different requirement: The IPv6 neighbor table exposes addresses learned through Neighbor Discovery. It does not directly meet the ethernet mac learning table need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests