McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 17

Question 160

Within Junos OS Fundamentals, a technician selects this approach: Locate routing protocol and management processing on the Routing Engine. Which original requirement or fault would most directly justify it?

  1. A packet needs an egress decision from the set of selected routes rather than all protocol candidates.
  2. A router itself creates an ICMP echo request to test an adjacent gateway.
  3. An engineer must investigate the process coordinating BGP and OSPF route calculation in Junos.
  4. An administrator needs to identify which Junos component calculates routes and runs the control-plane protocols.

Explanation

Correct Answer

D:

The Routing Engine executes control-plane functions such as routing protocols and maintains routing knowledge. This meets the stated need for routing engine control plane.

Incorrect Answers

A:

The forwarding information base scenario has a different requirement: A forwarding table contains information optimized for packet forwarding rather than every route candidate. It does not directly meet the routing engine control plane need in this question.

B:

The local-originated ping scenario has a different requirement: A packet generated by the router originates on its host/control plane rather than arriving as transit traffic. It does not directly meet the routing engine control plane need in this question.

C:

The routing protocol daemon rpd scenario has a different requirement: The rpd process participates in routing-protocol operation and route selection within Junos's control plane. It does not directly meet the routing engine control plane need in this question.

Question 161

A received transit packet must be forwarded at hardware speed without a full control-plane lookup on every packet. Which configuration or troubleshooting action most directly meets the need?

  1. Use the Packet Forwarding Engine for normal packet forwarding decisions.
  2. Handle the expired-TTL condition as an exception that may generate an ICMP time-exceeded message.
  3. Apply a supported classifier so the forwarding plane maps packets to the intended class of service.
  4. Resolve the next-hop adjacency so the PFE can transmit frames on the outgoing link.

Explanation

Correct Answer

A:

The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations. This meets the stated need for packet forwarding engine data plane.

Incorrect Answers

B:

The control-plane path after pfe exception scenario has a different requirement: TTL expiration requires exception processing and possible router-originated control traffic rather than successful normal transit forwarding. It does not directly meet the packet forwarding engine data plane need in this question.

C:

The cos classification and marking scenario has a different requirement: Forwarding-class selection influences packet queue treatment and potentially egress marking in the data plane. It does not directly meet the packet forwarding engine data plane need in this question.

D:

The forwarding interface resolution scenario has a different requirement: Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery. It does not directly meet the packet forwarding engine data plane need in this question.

Question 162

Within Junos OS Fundamentals, a Junos engineer proposes the following response: Use the Packet Forwarding Engine for normal packet forwarding decisions. Which concept or operating procedure is best illustrated?

  1. Control-plane path after PFE exception
  2. Packet Forwarding Engine data plane
  3. CoS classification and marking
  4. Forwarding interface resolution

Explanation

Correct Answer

B:

The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations. This meets the stated need for packet forwarding engine data plane.

Incorrect Answers

A:

The control-plane path after pfe exception scenario has a different requirement: TTL expiration requires exception processing and possible router-originated control traffic rather than successful normal transit forwarding. It does not directly meet the packet forwarding engine data plane need in this question.

C:

The cos classification and marking scenario has a different requirement: Forwarding-class selection influences packet queue treatment and potentially egress marking in the data plane. It does not directly meet the packet forwarding engine data plane need in this question.

D:

The forwarding interface resolution scenario has a different requirement: Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery. It does not directly meet the packet forwarding engine data plane need in this question.

Question 163

A received transit packet must be forwarded at hardware speed without a full control-plane lookup on every packet. The proposed response is: Use the Packet Forwarding Engine for normal packet forwarding decisions. Which explanation most accurately supports this response?

  1. TTL expiration requires exception processing and possible router-originated control traffic rather than successful normal transit forwarding.
  2. Forwarding-class selection influences packet queue treatment and potentially egress marking in the data plane.
  3. The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations.
  4. Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery.

Explanation

Correct Answer

C:

The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations. This meets the stated need for packet forwarding engine data plane.

Incorrect Answers

A:

The control-plane path after pfe exception scenario has a different requirement: TTL expiration requires exception processing and possible router-originated control traffic rather than successful normal transit forwarding. It does not directly meet the packet forwarding engine data plane need in this question.

B:

The cos classification and marking scenario has a different requirement: Forwarding-class selection influences packet queue treatment and potentially egress marking in the data plane. It does not directly meet the packet forwarding engine data plane need in this question.

D:

The forwarding interface resolution scenario has a different requirement: Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery. It does not directly meet the packet forwarding engine data plane need in this question.

Question 164

Within Junos OS Fundamentals, a technician selects this approach: Use the Packet Forwarding Engine for normal packet forwarding decisions. Which original requirement or fault would most directly justify it?

  1. An arriving packet has a time-to-live that expires at the router.
  2. A received transit packet must be forwarded at hardware speed without a full control-plane lookup on every packet.
  3. Packets enter a Junos interface and must be assigned appropriate forwarding classes before queuing.
  4. The route points at a next hop on a directly attached Ethernet network and needs a deliverable link-layer address.

Explanation

Correct Answer

B:

The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations. This meets the stated need for packet forwarding engine data plane.

Incorrect Answers

A:

The control-plane path after pfe exception scenario has a different requirement: TTL expiration requires exception processing and possible router-originated control traffic rather than successful normal transit forwarding. It does not directly meet the packet forwarding engine data plane need in this question.

C:

The cos classification and marking scenario has a different requirement: Forwarding-class selection influences packet queue treatment and potentially egress marking in the data plane. It does not directly meet the packet forwarding engine data plane need in this question.

D:

The forwarding interface resolution scenario has a different requirement: Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery. It does not directly meet the packet forwarding engine data plane need in this question.

Question 165

A data center operator wants a device architecture that decouples route calculations from routine traffic handling. Which configuration or troubleshooting action most directly meets the need?

  1. Use its modular daemon-based architecture to isolate protocol and management responsibilities.
  2. Resolve the next-hop adjacency so the PFE can transmit frames on the outgoing link.
  3. Use Junos separation between the Routing Engine and Packet Forwarding Engine.
  4. Distinguish Routing Engine CPU utilization from PFE forwarding throughput.

Explanation

Correct Answer

C:

Separating control functions from forwarding helps hardware continue high-speed packet processing as protocols run. This meets the stated need for separate control and forwarding planes.

Incorrect Answers

A:

The modular process isolation scenario has a different requirement: Separate system processes reduce coupling between routing, management, and other operating-system functions. It does not directly meet the separate control and forwarding planes need in this question.

B:

The forwarding interface resolution scenario has a different requirement: Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery. It does not directly meet the separate control and forwarding planes need in this question.

D:

The re cpu versus transit throughput scenario has a different requirement: Normal transit forwarding can be hardware accelerated, so control-plane CPU use does not directly equal port forwarding load. It does not directly meet the separate control and forwarding planes need in this question.

Question 166

Within Junos OS Fundamentals, a Junos engineer proposes the following response: Use Junos separation between the Routing Engine and Packet Forwarding Engine. Which concept or operating procedure is best illustrated?

  1. Modular process isolation
  2. Forwarding interface resolution
  3. RE CPU versus transit throughput
  4. Separate control and forwarding planes

Explanation

Correct Answer

D:

Separating control functions from forwarding helps hardware continue high-speed packet processing as protocols run. This meets the stated need for separate control and forwarding planes.

Incorrect Answers

A:

The modular process isolation scenario has a different requirement: Separate system processes reduce coupling between routing, management, and other operating-system functions. It does not directly meet the separate control and forwarding planes need in this question.

B:

The forwarding interface resolution scenario has a different requirement: Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery. It does not directly meet the separate control and forwarding planes need in this question.

C:

The re cpu versus transit throughput scenario has a different requirement: Normal transit forwarding can be hardware accelerated, so control-plane CPU use does not directly equal port forwarding load. It does not directly meet the separate control and forwarding planes need in this question.

Question 167

A data center operator wants a device architecture that decouples route calculations from routine traffic handling. The proposed response is: Use Junos separation between the Routing Engine and Packet Forwarding Engine. Which explanation most accurately supports this response?

  1. Separating control functions from forwarding helps hardware continue high-speed packet processing as protocols run.
  2. Separate system processes reduce coupling between routing, management, and other operating-system functions.
  3. Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery.
  4. Normal transit forwarding can be hardware accelerated, so control-plane CPU use does not directly equal port forwarding load.

Explanation

Correct Answer

A:

Separating control functions from forwarding helps hardware continue high-speed packet processing as protocols run. This meets the stated need for separate control and forwarding planes.

Incorrect Answers

B:

The modular process isolation scenario has a different requirement: Separate system processes reduce coupling between routing, management, and other operating-system functions. It does not directly meet the separate control and forwarding planes need in this question.

C:

The forwarding interface resolution scenario has a different requirement: Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery. It does not directly meet the separate control and forwarding planes need in this question.

D:

The re cpu versus transit throughput scenario has a different requirement: Normal transit forwarding can be hardware accelerated, so control-plane CPU use does not directly equal port forwarding load. It does not directly meet the separate control and forwarding planes need in this question.

Question 168

Within Junos OS Fundamentals, a technician selects this approach: Use Junos separation between the Routing Engine and Packet Forwarding Engine. Which original requirement or fault would most directly justify it?

  1. A networking team asks why Junos divides functions into specialized system processes.
  2. The route points at a next hop on a directly attached Ethernet network and needs a deliverable link-layer address.
  3. A router's management CPU is busy, yet ordinary transit flows continue at expected hardware rate.
  4. A data center operator wants a device architecture that decouples route calculations from routine traffic handling.

Explanation

Correct Answer

D:

Separating control functions from forwarding helps hardware continue high-speed packet processing as protocols run. This meets the stated need for separate control and forwarding planes.

Incorrect Answers

A:

The modular process isolation scenario has a different requirement: Separate system processes reduce coupling between routing, management, and other operating-system functions. It does not directly meet the separate control and forwarding planes need in this question.

B:

The forwarding interface resolution scenario has a different requirement: Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery. It does not directly meet the separate control and forwarding planes need in this question.

C:

The re cpu versus transit throughput scenario has a different requirement: Normal transit forwarding can be hardware accelerated, so control-plane CPU use does not directly equal port forwarding load. It does not directly meet the separate control and forwarding planes need in this question.

Question 169

A packet arrives on one router interface and exits another without being addressed to the router itself. Which configuration or troubleshooting action most directly meets the need?

  1. Use a routing table or RIB to represent learned and configured routes.
  2. Classify it as transit traffic normally processed by the forwarding plane.
  3. Check control-plane protocol sessions and route state rather than assuming the Ethernet hardware failed.
  4. Identify the PFE's forwarding hardware or ASIC lookup stage.

Explanation

Correct Answer

B:

Transit packets pass through the device and are normally handled by PFE forwarding logic. This meets the stated need for transit packet path.

Incorrect Answers

A:

The routing information base scenario has a different requirement: The RIB retains route candidates and active route decisions used to derive forwarding state. It does not directly meet the transit packet path need in this question.

C:

The routing process recovery scenario has a different requirement: Routing-daemon disruption primarily affects protocol state and route learning, though forwarded traffic can be affected later. It does not directly meet the transit packet path need in this question.

D:

The forwarding asic lookup scenario has a different requirement: The packet-forwarding system uses preinstalled lookup state to select egress interfaces and next hops. It does not directly meet the transit packet path need in this question.

Question 170

Within Junos OS Fundamentals, a Junos engineer proposes the following response: Classify it as transit traffic normally processed by the forwarding plane. Which concept or operating procedure is best illustrated?

  1. Routing Information Base
  2. Transit packet path
  3. Routing process recovery
  4. Forwarding ASIC lookup

Explanation

Correct Answer

B:

Transit packets pass through the device and are normally handled by PFE forwarding logic. This meets the stated need for transit packet path.

Incorrect Answers

A:

The routing information base scenario has a different requirement: The RIB retains route candidates and active route decisions used to derive forwarding state. It does not directly meet the transit packet path need in this question.

C:

The routing process recovery scenario has a different requirement: Routing-daemon disruption primarily affects protocol state and route learning, though forwarded traffic can be affected later. It does not directly meet the transit packet path need in this question.

D:

The forwarding asic lookup scenario has a different requirement: The packet-forwarding system uses preinstalled lookup state to select egress interfaces and next hops. It does not directly meet the transit packet path need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests