Question 490
After fixing the following network problem, what should the team verify: A provider builds an optical routed backbone but still treats every DWDM wavelength change as independent from IP restoration, creating contradictory failover policies.
Explanation
Correct Answer
Link-down and lightpath-loss tests select the intended restoration layer without persistent forwarding loops. This confirms the approved response: Coordinate optical restoration and IP-layer convergence objectives using a documented routed-optical failure strategy. It is relevant because: Optical and packet layers can both repair failures, and uncoordinated timers may cause oscillation or unnecessarily prolonged reconvergence.
Incorrect Answers
A test frame sent between the two UNI endpoints retains the required service VLAN attributes and does not reach any unapproved site. This would validate ANOTHER scenario: A metro aggregation design places a latency-sensitive enterprise E-Line directly across an IP core with no documented Ethernet service handoff, leading to mismatched expectations for transparent VLAN carriage. The specific correction here is: Coordinate optical restoration and IP-layer convergence objectives using a documented routed-optical failure strategy.
Synthetic timing and delay tests remain within the RAN interface limits at full traffic load. This would validate ANOTHER scenario: A 5G fronthaul transport team treats a RAN radio-to-distributed-unit path as an ordinary best-effort internet uplink and sees timing instability during peak load. The specific correction here is: Coordinate optical restoration and IP-layer convergence objectives using a documented routed-optical failure strategy.
A capability check selects a valid interface for each device and rejects models not advertised by the platform. This would validate ANOTHER scenario: A mixed fleet automation job expects an IOS XE NETCONF configuration schema to map identically to all classic IOS software releases. The specific correction here is: Coordinate optical restoration and IP-layer convergence objectives using a documented routed-optical failure strategy.