McAfee-Secured Website

Exam Bundle

Exam Code: 350-501

Exam Name Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Certification Provider: Cisco

Corresponding Certifications: CCIE Service Provider , CCNP Service Provider

Cisco 350-501 Bundle $28.79

100% Cisco 350-501 Guaranteed Success With Testking Training Materials

Get Real 350-501 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-501 Questions & Answers

    528 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-501 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-501 Video Course

    350-501 Video Course

    253 Video Lectures

    350-501 Video Course is developed by Cisco Professionals to help you pass the 350-501 exam.

    Description

    This course will improve your knowledge and skills required to pass Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) exam.
  • Study Guide

    350-501 Study Guide

    1160 PDF Pages

    Developed by industry experts, this 1160-page guide spells out in painstaking detail all of the information you need to ace 350-501 exam.

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $189.97
Bundle Price: $161.18

Purchase Individually

  • Questions & Answers

    Questions & Answers

    528 Questions

    $124.99
  • 350-501 Video Course

    Video Course

    253 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1160 PDF Pages

    $24.99

Cisco 350-501 Practice Test 49

Question 480

To prevent recurrence of this provider network issue: A remote customer site can send packets toward the Internet exit in a shared services VRF but the exit has no return route for the private customer prefix. Which control should be retained?

  1. Retest primary and backup preference whenever CE prefixes change.
  2. Include stale route and next-hop cleanup in VPN site migrations.
  3. Include forward and return path checks in shared-services acceptance.
  4. Review RPL ownership and ring state during ring expansion.

Explanation

Correct Answer

C:

Include forward and return path checks in shared-services acceptance. This helps prevent recurrence of the issue: A remote customer site can send packets toward the Internet exit in a shared services VRF but the exit has no return route for the private customer prefix. Acceptance evidence should be: An approved Internet test flow completes both directions without exposing other tenants' internal networks.

Incorrect Answers

A:

Retest primary and backup preference whenever CE prefixes change. That is a sensible control for ANOTHER scenario: A customer VRF needs dual-homed connectivity yet the provider sets local preference to favor the backup for all customer routes, causing avoidable transit cost. It is less targeted to this issue than: Include forward and return path checks in shared-services acceptance.

B:

Include stale route and next-hop cleanup in VPN site migrations. That is a sensible control for ANOTHER scenario: A carrier moves an enterprise's primary VPN site but retains an old CE static route in the remote VRF, steering packets to the retired PE. It is less targeted to this issue than: Include forward and return path checks in shared-services acceptance.

D:

Review RPL ownership and ring state during ring expansion. That is a sensible control for ANOTHER scenario: A G.8032 Ethernet ring sees a broadcast storm after a ring protection link is accidentally forwarding on both sides of a stable ring. It is less targeted to this issue than: Include forward and return path checks in shared-services acceptance.

Question 481

At an optical transport engineering team, an engineering review finds: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners. Which change most directly corrects the service problem?

  1. Inspect and configure MLD listener state for IPv6 independently from IPv4 IGMP.
  2. Align PIM-BIDIR group range and designated-forwarder/RP behavior for the supported multicast domain.
  3. Use IGMPv3 source-specific membership where required and align PIM-SSM source/group forwarding.
  4. Assign service-specific route targets and restrict import policy to the approved tenant set.

Explanation

Correct Answer

A:

Inspect and configure MLD listener state for IPv6 independently from IPv4 IGMP. This directly addresses the fictional service-provider network case: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners. The technical mechanism is: IGMP controls IPv4 multicast listener membership, while MLD performs the analogous role for IPv6. Verify success by: An IPv6 test host produces the expected MLDv2 source/group membership and receives the authorized stream.

Incorrect Answers

B:

Align PIM-BIDIR group range and designated-forwarder/RP behavior for the supported multicast domain. This would respond to a DIFFERENT fictional service-provider network issue: A bidirectional multicast service accidentally enables ordinary PIM-SM source register processing for a BIDIR group, creating duplicate replication. It does not directly address the current situation: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners.

C:

Use IGMPv3 source-specific membership where required and align PIM-SSM source/group forwarding. This would respond to a DIFFERENT fictional service-provider network issue: A multicast source sends video to an SSM group, but an access router uses IGMPv2 joins without source specification and receivers see no stream. It does not directly address the current situation: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners.

D:

Assign service-specific route targets and restrict import policy to the approved tenant set. This would respond to a DIFFERENT fictional service-provider network issue: A provider advertises the same extranet shared-services prefix into two tenants, but a third tenant unexpectedly imports it because a generic RT is reused globally. It does not directly address the current situation: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners.

Question 482

For an optical transport engineering team, operators addressed: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners. What is the strongest acceptance evidence?

  1. One intended DR is elected and the shared LAN emits the expected controlled PIM behavior.
  2. An IPv6 test host produces the expected MLDv2 source/group membership and receives the authorized stream.
  3. Controlled traffic from multiple sources reaches receivers without duplicated registration-path forwarding.
  4. Only the contracted retail access endpoints exchange frames while unrelated handoffs stay isolated.

Explanation

Correct Answer

B:

An IPv6 test host produces the expected MLDv2 source/group membership and receives the authorized stream. This confirms the approved response: Inspect and configure MLD listener state for IPv6 independently from IPv4 IGMP. It is relevant because: IGMP controls IPv4 multicast listener membership, while MLD performs the analogous role for IPv6.

Incorrect Answers

A:

One intended DR is elected and the shared LAN emits the expected controlled PIM behavior. This would validate ANOTHER scenario: Two multicast access routers each act as designated router for the same LAN after a timer mismatch and receivers see repeated source register behavior. The specific correction here is: Inspect and configure MLD listener state for IPv6 independently from IPv4 IGMP.

C:

Controlled traffic from multiple sources reaches receivers without duplicated registration-path forwarding. This would validate ANOTHER scenario: A bidirectional multicast service accidentally enables ordinary PIM-SM source register processing for a BIDIR group, creating duplicate replication. The specific correction here is: Inspect and configure MLD listener state for IPv6 independently from IPv4 IGMP.

D:

Only the contracted retail access endpoints exchange frames while unrelated handoffs stay isolated. This would validate ANOTHER scenario: An E-Access wholesale demarcation connects one retail provider UNI to a distant operator UNI, but the order is provisioned as an open multipoint LAN across all sites. The specific correction here is: Inspect and configure MLD listener state for IPv6 independently from IPv4 IGMP.

Question 483

Which network protocol or forwarding behavior explains the following issue: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners.

  1. PIM designated-router election affects which router performs certain source and join responsibilities on a shared LAN.
  2. Source-Specific Multicast relies on explicit source/group membership signaling rather than any-source group joins.
  3. IGMP controls IPv4 multicast listener membership, while MLD performs the analogous role for IPv6.
  4. EVPN Type-5 routes distribute IP prefix reachability and require appropriate service import policy.

Explanation

Correct Answer

C:

IGMP controls IPv4 multicast listener membership, while MLD performs the analogous role for IPv6. This explains the investigated issue: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners. The approved corrective response is: Inspect and configure MLD listener state for IPv6 independently from IPv4 IGMP.

Incorrect Answers

A:

PIM designated-router election affects which router performs certain source and join responsibilities on a shared LAN. That explains a DIFFERENT scenario: Two multicast access routers each act as designated router for the same LAN after a timer mismatch and receivers see repeated source register behavior. The mechanism to prioritize for this question is: IGMP controls IPv4 multicast listener membership, while MLD performs the analogous role for IPv6.

B:

Source-Specific Multicast relies on explicit source/group membership signaling rather than any-source group joins. That explains a DIFFERENT scenario: A multicast source sends video to an SSM group, but an access router uses IGMPv2 joins without source specification and receivers see no stream. The mechanism to prioritize for this question is: IGMP controls IPv4 multicast listener membership, while MLD performs the analogous role for IPv6.

D:

EVPN Type-5 routes distribute IP prefix reachability and require appropriate service import policy. That explains a DIFFERENT scenario: A provider imports an EVPN Type-5 IP prefix into the wrong VRF because a route-target policy matches a customer label instead of the service's approved tenant RT. The mechanism to prioritize for this question is: IGMP controls IPv4 multicast listener membership, while MLD performs the analogous role for IPv6.

Question 484

A core network change board wants to avoid: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners. Which ongoing safeguard fits best?

  1. Test DR state when changing multicast LAN interfaces.
  2. Validate host and router IGMPv3 compatibility before deploying SSM services.
  3. Validate CE route reception, VPN export and remote import as three separate checks.
  4. Include both IGMP and MLD listener tests on dual-stack access nodes.

Explanation

Correct Answer

D:

Include both IGMP and MLD listener tests on dual-stack access nodes. This helps prevent recurrence of the issue: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners. Acceptance evidence should be: An IPv6 test host produces the expected MLDv2 source/group membership and receives the authorized stream.

Incorrect Answers

A:

Test DR state when changing multicast LAN interfaces. That is a sensible control for ANOTHER scenario: Two multicast access routers each act as designated router for the same LAN after a timer mismatch and receivers see repeated source register behavior. It is less targeted to this issue than: Include both IGMP and MLD listener tests on dual-stack access nodes.

B:

Validate host and router IGMPv3 compatibility before deploying SSM services. That is a sensible control for ANOTHER scenario: A multicast source sends video to an SSM group, but an access router uses IGMPv2 joins without source specification and receivers see no stream. It is less targeted to this issue than: Include both IGMP and MLD listener tests on dual-stack access nodes.

C:

Validate CE route reception, VPN export and remote import as three separate checks. That is a sensible control for ANOTHER scenario: A CE-PE BGP session successfully exchanges routes but a newly provisioned customer VRF has no route targets and none of its routes propagate to distant PEs. It is less targeted to this issue than: Include both IGMP and MLD listener tests on dual-stack access nodes.

Question 485

A carrier service activation check discovers: A high-volume backup class is placed in the same strict-priority queue as voice, starving the provider's control and ordinary traffic. Which action best restores the intended behavior?

  1. Recalculate shaping rate and burst parameters from the service contract and platform queue behavior.
  2. Classify backup traffic into an appropriate weighted queue and limit the priority queue to approved delay-sensitive flows.
  3. Use shaping where buffering is appropriate or retune policing burst allowances to the intended contract.
  4. Correct the CFM maintenance domain, association and MEP identifiers for the intended service.

Explanation

Correct Answer

B:

Classify backup traffic into an appropriate weighted queue and limit the priority queue to approved delay-sensitive flows. This directly addresses the fictional service-provider network case: A high-volume backup class is placed in the same strict-priority queue as voice, starving the provider's control and ordinary traffic. The technical mechanism is: Unbounded strict priority can starve nonpriority classes during persistent overload. Verify success by: Mixed-traffic tests meet voice latency while other classes retain minimum forwarding service.

Incorrect Answers

A:

Recalculate shaping rate and burst parameters from the service contract and platform queue behavior. This would respond to a DIFFERENT fictional service-provider network issue: A traffic shaper is configured with a committed rate lower than the contracted customer rate and drops bursts even though physical uplink capacity is idle. It does not directly address the current situation: A high-volume backup class is placed in the same strict-priority queue as voice, starving the provider's control and ordinary traffic.

C:

Use shaping where buffering is appropriate or retune policing burst allowances to the intended contract. This would respond to a DIFFERENT fictional service-provider network issue: An access policy applies a strict policer to interactive traffic and expects it to smooth bursts like a shaper, resulting in avoidable packet discards. It does not directly address the current situation: A high-volume backup class is placed in the same strict-priority queue as voice, starving the provider's control and ordinary traffic.

D:

Correct the CFM maintenance domain, association and MEP identifiers for the intended service. This would respond to a DIFFERENT fictional service-provider network issue: An Ethernet OAM continuity check reports an unexpected remote maintenance endpoint and operators trust the wrong circuit when troubleshooting an outage. It does not directly address the current situation: A high-volume backup class is placed in the same strict-priority queue as voice, starving the provider's control and ordinary traffic.

Question 486

Following a supported configuration correction, the original issue was: A high-volume backup class is placed in the same strict-priority queue as voice, starving the provider's control and ordinary traffic. Which observation verifies success?

  1. During deliberate congestion, both sites show the intended class distribution and measurable queuing behavior.
  2. Customer test packets receive the contracted class, and provider protocol packets retain protected control priority.
  3. Mixed-traffic tests meet voice latency while other classes retain minimum forwarding service.
  4. Two test customers using the same group address receive only their own authorized source streams.

Explanation

Correct Answer

C:

Mixed-traffic tests meet voice latency while other classes retain minimum forwarding service. This confirms the approved response: Classify backup traffic into an appropriate weighted queue and limit the priority queue to approved delay-sensitive flows. It is relevant because: Unbounded strict priority can starve nonpriority classes during persistent overload.

Incorrect Answers

A:

During deliberate congestion, both sites show the intended class distribution and measurable queuing behavior. This would validate ANOTHER scenario: Two sites use identical DSCP values but only one interface applies a queue scheduler, and the team assumes packet marking alone guarantees bandwidth on both links. The specific correction here is: Classify backup traffic into an appropriate weighted queue and limit the priority queue to approved delay-sensitive flows.

B:

Customer test packets receive the contracted class, and provider protocol packets retain protected control priority. This would validate ANOTHER scenario: A customer sends traffic marked CS6 from its access port and expects unlimited priority throughout the provider despite not purchasing a network-control service class. The specific correction here is: Classify backup traffic into an appropriate weighted queue and limit the priority queue to approved delay-sensitive flows.

D:

Two test customers using the same group address receive only their own authorized source streams. This would validate ANOTHER scenario: A multicast VPN customer uses overlapping group addresses with another tenant, and the service provider combines the flows into one global multicast state. The specific correction here is: Classify backup traffic into an appropriate weighted queue and limit the priority queue to approved delay-sensitive flows.

Question 487

At a carrier automation platform team, an engineer examines: A high-volume backup class is placed in the same strict-priority queue as voice, starving the provider's control and ordinary traffic. Which technical principle is most applicable?

  1. Classification and marking label traffic, but congestion handling depends on actual queue and scheduling policies at bottlenecks.
  2. Trust boundaries stop customers from impersonating carrier routing and control-plane QoS markings.
  3. L3VPN shared services are built with intentional route leaking and must not automatically merge entire tenant routing tables.
  4. Unbounded strict priority can starve nonpriority classes during persistent overload.

Explanation

Correct Answer

D:

Unbounded strict priority can starve nonpriority classes during persistent overload. This explains the investigated issue: A high-volume backup class is placed in the same strict-priority queue as voice, starving the provider's control and ordinary traffic. The approved corrective response is: Classify backup traffic into an appropriate weighted queue and limit the priority queue to approved delay-sensitive flows.

Incorrect Answers

A:

Classification and marking label traffic, but congestion handling depends on actual queue and scheduling policies at bottlenecks. That explains a DIFFERENT scenario: Two sites use identical DSCP values but only one interface applies a queue scheduler, and the team assumes packet marking alone guarantees bandwidth on both links. The mechanism to prioritize for this question is: Unbounded strict priority can starve nonpriority classes during persistent overload.

B:

Trust boundaries stop customers from impersonating carrier routing and control-plane QoS markings. That explains a DIFFERENT scenario: A customer sends traffic marked CS6 from its access port and expects unlimited priority throughout the provider despite not purchasing a network-control service class. The mechanism to prioritize for this question is: Unbounded strict priority can starve nonpriority classes during persistent overload.

C:

L3VPN shared services are built with intentional route leaking and must not automatically merge entire tenant routing tables. That explains a DIFFERENT scenario: A shared-services DNS VRF must serve three customer VRFs, but engineers import full customer route tables into the DNS VRF and unintentionally create broad extranet connectivity. The mechanism to prioritize for this question is: Unbounded strict priority can starve nonpriority classes during persistent overload.

Question 488

For a carrier automation platform team, the change record describes: A high-volume backup class is placed in the same strict-priority queue as voice, starving the provider's control and ordinary traffic. What preventive validation should be standard?

  1. Test queue fairness and priority traffic caps at oversubscription.
  2. Include untrusted DSCP abuse tests at provider access interfaces.
  3. Verify deployed service policies on every physical and logical egress bottleneck.
  4. Verify tag stacking and pop/push symmetry at access handoffs.

Explanation

Correct Answer

A:

Test queue fairness and priority traffic caps at oversubscription. This helps prevent recurrence of the issue: A high-volume backup class is placed in the same strict-priority queue as voice, starving the provider's control and ordinary traffic. Acceptance evidence should be: Mixed-traffic tests meet voice latency while other classes retain minimum forwarding service.

Incorrect Answers

B:

Include untrusted DSCP abuse tests at provider access interfaces. That is a sensible control for ANOTHER scenario: A customer sends traffic marked CS6 from its access port and expects unlimited priority throughout the provider despite not purchasing a network-control service class. It is less targeted to this issue than: Test queue fairness and priority traffic caps at oversubscription.

C:

Verify deployed service policies on every physical and logical egress bottleneck. That is a sensible control for ANOTHER scenario: Two sites use identical DSCP values but only one interface applies a queue scheduler, and the team assumes packet marking alone guarantees bandwidth on both links. It is less targeted to this issue than: Test queue fairness and priority traffic caps at oversubscription.

D:

Verify tag stacking and pop/push symmetry at access handoffs. That is a sensible control for ANOTHER scenario: A wholesale Ethernet access provider uses an 802.1ad QinQ handoff but pops both tags before the customer PE, collapsing two independent service instances. It is less targeted to this issue than: Test queue fairness and priority traffic caps at oversubscription.

Question 489

For a multi-tenant data transport provider, the failure is: A provider builds an optical routed backbone but still treats every DWDM wavelength change as independent from IP restoration, creating contradictory failover policies. Which authorized correction best addresses it?

  1. Engineer the xhaul path using the documented latency, synchronization, capacity and isolation targets for the radio architecture.
  2. Place an explicit supported SRv6-to-MPLS interworking function at the technology boundary or constrain the SRv6 path to capable nodes.
  3. Coordinate optical restoration and IP-layer convergence objectives using a documented routed-optical failure strategy.
  4. Persist required configuration in a supported durable data service or mounted volume and redeploy from versioned desired state.

Explanation

Correct Answer

C:

Coordinate optical restoration and IP-layer convergence objectives using a documented routed-optical failure strategy. This directly addresses the fictional service-provider network case: A provider builds an optical routed backbone but still treats every DWDM wavelength change as independent from IP restoration, creating contradictory failover policies. The technical mechanism is: Optical and packet layers can both repair failures, and uncoordinated timers may cause oscillation or unnecessarily prolonged reconvergence. Verify success by: Link-down and lightpath-loss tests select the intended restoration layer without persistent forwarding loops.

Incorrect Answers

A:

Engineer the xhaul path using the documented latency, synchronization, capacity and isolation targets for the radio architecture. This would respond to a DIFFERENT fictional service-provider network issue: A 5G fronthaul transport team treats a RAN radio-to-distributed-unit path as an ordinary best-effort internet uplink and sees timing instability during peak load. It does not directly address the current situation: A provider builds an optical routed backbone but still treats every DWDM wavelength change as independent from IP restoration, creating contradictory failover policies.

B:

Place an explicit supported SRv6-to-MPLS interworking function at the technology boundary or constrain the SRv6 path to capable nodes. This would respond to a DIFFERENT fictional service-provider network issue: A core team routes an SRv6 service through legacy MPLS-only nodes without defining an interworking point, so traffic loses its intended segment behavior. It does not directly address the current situation: A provider builds an optical routed backbone but still treats every DWDM wavelength change as independent from IP restoration, creating contradictory failover policies.

D:

Persist required configuration in a supported durable data service or mounted volume and redeploy from versioned desired state. This would respond to a DIFFERENT fictional service-provider network issue: A provider stores a VNF configuration exclusively on the ephemeral container filesystem and loses subscriber policy after an orchestrator restarts the instance. It does not directly address the current situation: A provider builds an optical routed backbone but still treats every DWDM wavelength change as independent from IP restoration, creating contradictory failover policies.

Question 490

After fixing the following network problem, what should the team verify: A provider builds an optical routed backbone but still treats every DWDM wavelength change as independent from IP restoration, creating contradictory failover policies.

  1. A test frame sent between the two UNI endpoints retains the required service VLAN attributes and does not reach any unapproved site.
  2. Synthetic timing and delay tests remain within the RAN interface limits at full traffic load.
  3. A capability check selects a valid interface for each device and rejects models not advertised by the platform.
  4. Link-down and lightpath-loss tests select the intended restoration layer without persistent forwarding loops.

Explanation

Correct Answer

D:

Link-down and lightpath-loss tests select the intended restoration layer without persistent forwarding loops. This confirms the approved response: Coordinate optical restoration and IP-layer convergence objectives using a documented routed-optical failure strategy. It is relevant because: Optical and packet layers can both repair failures, and uncoordinated timers may cause oscillation or unnecessarily prolonged reconvergence.

Incorrect Answers

A:

A test frame sent between the two UNI endpoints retains the required service VLAN attributes and does not reach any unapproved site. This would validate ANOTHER scenario: A metro aggregation design places a latency-sensitive enterprise E-Line directly across an IP core with no documented Ethernet service handoff, leading to mismatched expectations for transparent VLAN carriage. The specific correction here is: Coordinate optical restoration and IP-layer convergence objectives using a documented routed-optical failure strategy.

B:

Synthetic timing and delay tests remain within the RAN interface limits at full traffic load. This would validate ANOTHER scenario: A 5G fronthaul transport team treats a RAN radio-to-distributed-unit path as an ordinary best-effort internet uplink and sees timing instability during peak load. The specific correction here is: Coordinate optical restoration and IP-layer convergence objectives using a documented routed-optical failure strategy.

C:

A capability check selects a valid interface for each device and rejects models not advertised by the platform. This would validate ANOTHER scenario: A mixed fleet automation job expects an IOS XE NETCONF configuration schema to map identically to all classic IOS software releases. The specific correction here is: Coordinate optical restoration and IP-layer convergence objectives using a documented routed-optical failure strategy.