McAfee-Secured Website

Exam Bundle

Exam Code: 350-501

Exam Name Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Certification Provider: Cisco

Corresponding Certifications: CCIE Service Provider , CCNP Service Provider

Cisco 350-501 Bundle $28.79

100% Cisco 350-501 Guaranteed Success With Testking Training Materials

Get Real 350-501 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-501 Questions & Answers

    528 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-501 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-501 Video Course

    350-501 Video Course

    253 Video Lectures

    350-501 Video Course is developed by Cisco Professionals to help you pass the 350-501 exam.

    Description

    This course will improve your knowledge and skills required to pass Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) exam.
  • Study Guide

    350-501 Study Guide

    1160 PDF Pages

    Developed by industry experts, this 1160-page guide spells out in painstaking detail all of the information you need to ace 350-501 exam.

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $189.97
Bundle Price: $161.18

Purchase Individually

  • Questions & Answers

    Questions & Answers

    528 Questions

    $124.99
  • 350-501 Video Course

    Video Course

    253 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1160 PDF Pages

    $24.99

Cisco 350-501 Practice Test 1

Question 1

At a regional service-provider operations center, an engineering review finds: A metro aggregation design places a latency-sensitive enterprise E-Line directly across an IP core with no documented Ethernet service handoff, leading to mismatched expectations for transparent VLAN carriage. Which change most directly corrects the service problem?

  1. Define the Carrier Ethernet E-Line service demarcation and use an appropriate provider Ethernet or pseudowire transport between the designated endpoints.
  2. Engineer the xhaul path using the documented latency, synchronization, capacity and isolation targets for the radio architecture.
  3. Place an explicit supported SRv6-to-MPLS interworking function at the technology boundary or constrain the SRv6 path to capable nodes.
  4. Use supported IOS XR process or application recovery procedures and verify expected route-processing behavior without a blanket chassis reload.

Explanation

Correct Answer

A:

Define the Carrier Ethernet E-Line service demarcation and use an appropriate provider Ethernet or pseudowire transport between the designated endpoints. This directly addresses the fictional service-provider network case: A metro aggregation design places a latency-sensitive enterprise E-Line directly across an IP core with no documented Ethernet service handoff, leading to mismatched expectations for transparent VLAN carriage. The technical mechanism is: An E-Line is a point-to-point Ethernet service whose service boundary must be explicit even when the underlying provider backbone uses routed transport. Verify success by: A test frame sent between the two UNI endpoints retains the required service VLAN attributes and does not reach any unapproved site.

Incorrect Answers

B:

Engineer the xhaul path using the documented latency, synchronization, capacity and isolation targets for the radio architecture. This would respond to a DIFFERENT fictional service-provider network issue: A 5G fronthaul transport team treats a RAN radio-to-distributed-unit path as an ordinary best-effort internet uplink and sees timing instability during peak load. It does not directly address the current situation: A metro aggregation design places a latency-sensitive enterprise E-Line directly across an IP core with no documented Ethernet service handoff, leading to mismatched expectations for transparent VLAN carriage.

C:

Place an explicit supported SRv6-to-MPLS interworking function at the technology boundary or constrain the SRv6 path to capable nodes. This would respond to a DIFFERENT fictional service-provider network issue: A core team routes an SRv6 service through legacy MPLS-only nodes without defining an interworking point, so traffic loses its intended segment behavior. It does not directly address the current situation: A metro aggregation design places a latency-sensitive enterprise E-Line directly across an IP core with no documented Ethernet service handoff, leading to mismatched expectations for transparent VLAN carriage.

D:

Use supported IOS XR process or application recovery procedures and verify expected route-processing behavior without a blanket chassis reload. This would respond to a DIFFERENT fictional service-provider network issue: An engineer assumes a process restart on an IOS XR control-plane node always reloads the entire router, causing an unnecessary maintenance outage. It does not directly address the current situation: A metro aggregation design places a latency-sensitive enterprise E-Line directly across an IP core with no documented Ethernet service handoff, leading to mismatched expectations for transparent VLAN carriage.

Question 2

For a regional service-provider operations center, operators addressed: A metro aggregation design places a latency-sensitive enterprise E-Line directly across an IP core with no documented Ethernet service handoff, leading to mismatched expectations for transparent VLAN carriage. What is the strongest acceptance evidence?

  1. Link-down and lightpath-loss tests select the intended restoration layer without persistent forwarding loops.
  2. A test frame sent between the two UNI endpoints retains the required service VLAN attributes and does not reach any unapproved site.
  3. Synthetic timing and delay tests remain within the RAN interface limits at full traffic load.
  4. The legitimate adjacent session remains established while a distant test source with unsuitable TTL is rejected.

Explanation

Correct Answer

B:

A test frame sent between the two UNI endpoints retains the required service VLAN attributes and does not reach any unapproved site. This confirms the approved response: Define the Carrier Ethernet E-Line service demarcation and use an appropriate provider Ethernet or pseudowire transport between the designated endpoints. It is relevant because: An E-Line is a point-to-point Ethernet service whose service boundary must be explicit even when the underlying provider backbone uses routed transport.

Incorrect Answers

A:

Link-down and lightpath-loss tests select the intended restoration layer without persistent forwarding loops. This would validate ANOTHER scenario: A provider builds an optical routed backbone but still treats every DWDM wavelength change as independent from IP restoration, creating contradictory failover policies. The specific correction here is: Define the Carrier Ethernet E-Line service demarcation and use an appropriate provider Ethernet or pseudowire transport between the designated endpoints.

C:

Synthetic timing and delay tests remain within the RAN interface limits at full traffic load. This would validate ANOTHER scenario: A 5G fronthaul transport team treats a RAN radio-to-distributed-unit path as an ordinary best-effort internet uplink and sees timing instability during peak load. The specific correction here is: Define the Carrier Ethernet E-Line service demarcation and use an appropriate provider Ethernet or pseudowire transport between the designated endpoints.

D:

The legitimate adjacent session remains established while a distant test source with unsuitable TTL is rejected. This would validate ANOTHER scenario: A BGP session from an adjacent PE can be spoofed by packets arriving many router hops away because the provider leaves TTL-security disabled. The specific correction here is: Define the Carrier Ethernet E-Line service demarcation and use an appropriate provider Ethernet or pseudowire transport between the designated endpoints.

Question 3

Which network protocol or forwarding behavior explains the following issue: A metro aggregation design places a latency-sensitive enterprise E-Line directly across an IP core with no documented Ethernet service handoff, leading to mismatched expectations for transparent VLAN carriage.

  1. DOCSIS and xPON are different access technologies with different physical and control-plane termination systems.
  2. Optical and packet layers can both repair failures, and uncoordinated timers may cause oscillation or unnecessarily prolonged reconvergence.
  3. An E-Line is a point-to-point Ethernet service whose service boundary must be explicit even when the underlying provider backbone uses routed transport.
  4. A VNF requires both compute execution and correctly bound virtual networking to participate in a forwarding chain.

Explanation

Correct Answer

C:

An E-Line is a point-to-point Ethernet service whose service boundary must be explicit even when the underlying provider backbone uses routed transport. This explains the investigated issue: A metro aggregation design places a latency-sensitive enterprise E-Line directly across an IP core with no documented Ethernet service handoff, leading to mismatched expectations for transparent VLAN carriage. The approved corrective response is: Define the Carrier Ethernet E-Line service demarcation and use an appropriate provider Ethernet or pseudowire transport between the designated endpoints.

Incorrect Answers

A:

DOCSIS and xPON are different access technologies with different physical and control-plane termination systems. That explains a DIFFERENT scenario: A wholesale provider expects DOCSIS cable access equipment to terminate xPON optical network units and finds that provisioning never completes. The mechanism to prioritize for this question is: An E-Line is a point-to-point Ethernet service whose service boundary must be explicit even when the underlying provider backbone uses routed transport.

B:

Optical and packet layers can both repair failures, and uncoordinated timers may cause oscillation or unnecessarily prolonged reconvergence. That explains a DIFFERENT scenario: A provider builds an optical routed backbone but still treats every DWDM wavelength change as independent from IP restoration, creating contradictory failover policies. The mechanism to prioritize for this question is: An E-Line is a point-to-point Ethernet service whose service boundary must be explicit even when the underlying provider backbone uses routed transport.

D:

A VNF requires both compute execution and correctly bound virtual networking to participate in a forwarding chain. That explains a DIFFERENT scenario: A service provider moves a virtualized firewall to a new NFV host but neglects to recreate the virtual interfaces and cannot forward subscriber traffic. The mechanism to prioritize for this question is: An E-Line is a point-to-point Ethernet service whose service boundary must be explicit even when the underlying provider backbone uses routed transport.

Question 4

A core network change board wants to avoid: A metro aggregation design places a latency-sensitive enterprise E-Line directly across an IP core with no documented Ethernet service handoff, leading to mismatched expectations for transparent VLAN carriage. Which ongoing safeguard fits best?

  1. Revalidate transport budgets whenever a radio site or functional split is changed.
  2. Maintain an inventory of per-hop encapsulation support and interworking validation tests.
  3. Audit hosted-app resource utilization and release compatibility on upgrades.
  4. Validate UNI and EVC service attributes against an end-to-end circuit acceptance matrix.

Explanation

Correct Answer

D:

Validate UNI and EVC service attributes against an end-to-end circuit acceptance matrix. This helps prevent recurrence of the issue: A metro aggregation design places a latency-sensitive enterprise E-Line directly across an IP core with no documented Ethernet service handoff, leading to mismatched expectations for transparent VLAN carriage. Acceptance evidence should be: A test frame sent between the two UNI endpoints retains the required service VLAN attributes and does not reach any unapproved site.

Incorrect Answers

A:

Revalidate transport budgets whenever a radio site or functional split is changed. That is a sensible control for ANOTHER scenario: A 5G fronthaul transport team treats a RAN radio-to-distributed-unit path as an ordinary best-effort internet uplink and sees timing instability during peak load. It is less targeted to this issue than: Validate UNI and EVC service attributes against an end-to-end circuit acceptance matrix.

B:

Maintain an inventory of per-hop encapsulation support and interworking validation tests. That is a sensible control for ANOTHER scenario: A core team routes an SRv6 service through legacy MPLS-only nodes without defining an interworking point, so traffic loses its intended segment behavior. It is less targeted to this issue than: Validate UNI and EVC service attributes against an end-to-end circuit acceptance matrix.

C:

Audit hosted-app resource utilization and release compatibility on upgrades. That is a sensible control for ANOTHER scenario: An operations team deploys an application container directly onto a router control processor without checking vendor-supported hosting resources or isolation limits. It is less targeted to this issue than: Validate UNI and EVC service attributes against an end-to-end circuit acceptance matrix.

Question 5

A carrier service activation check discovers: A technician deploys IOS XE package commands to an IOS XR route processor, then misinterprets the command rejection as a missing license. Which action best restores the intended behavior?

  1. Classify the actual software platform and supported model-driven capabilities before using a shared configuration adapter.
  2. Identify the running IOS XR platform and follow its supported installation and operational command workflow.
  3. Use supported IOS XR process or application recovery procedures and verify expected route-processing behavior without a blanket chassis reload.
  4. Align supported MACsec connectivity association, keying, cipher settings and operational policy at both link endpoints.

Explanation

Correct Answer

B:

Identify the running IOS XR platform and follow its supported installation and operational command workflow. This directly addresses the fictional service-provider network case: A technician deploys IOS XE package commands to an IOS XR route processor, then misinterprets the command rejection as a missing license. The technical mechanism is: IOS XR has package and operational conventions that differ from traditional IOS and IOS XE. Verify success by: Software inventory and install-state readback confirm the intended package activation on the correct operating system.

Incorrect Answers

A:

Classify the actual software platform and supported model-driven capabilities before using a shared configuration adapter. This would respond to a DIFFERENT fictional service-provider network issue: A mixed fleet automation job expects an IOS XE NETCONF configuration schema to map identically to all classic IOS software releases. It does not directly address the current situation: A technician deploys IOS XE package commands to an IOS XR route processor, then misinterprets the command rejection as a missing license.

C:

Use supported IOS XR process or application recovery procedures and verify expected route-processing behavior without a blanket chassis reload. This would respond to a DIFFERENT fictional service-provider network issue: An engineer assumes a process restart on an IOS XR control-plane node always reloads the entire router, causing an unnecessary maintenance outage. It does not directly address the current situation: A technician deploys IOS XE package commands to an IOS XR route processor, then misinterprets the command rejection as a missing license.

D:

Align supported MACsec connectivity association, keying, cipher settings and operational policy at both link endpoints. This would respond to a DIFFERENT fictional service-provider network issue: MACsec was enabled on only one end of a provider cross-connect, leaving the routed adjacency down with integrity errors. It does not directly address the current situation: A technician deploys IOS XE package commands to an IOS XR route processor, then misinterprets the command rejection as a missing license.

Question 6

Following a supported configuration correction, the original issue was: A technician deploys IOS XE package commands to an IOS XR route processor, then misinterprets the command rejection as a missing license. Which observation verifies success?

  1. Reload verification shows the expected version and package status with the previous image available for controlled rollback.
  2. A controlled process test restores the affected service while unrelated line-card forwarding remains stable where supported.
  3. Software inventory and install-state readback confirm the intended package activation on the correct operating system.
  4. An authorized lab peer establishes an encrypted link and passes the intended L3 adjacency and data traffic.

Explanation

Correct Answer

C:

Software inventory and install-state readback confirm the intended package activation on the correct operating system. This confirms the approved response: Identify the running IOS XR platform and follow its supported installation and operational command workflow. It is relevant because: IOS XR has package and operational conventions that differ from traditional IOS and IOS XE.

Incorrect Answers

A:

Reload verification shows the expected version and package status with the previous image available for controlled rollback. This would validate ANOTHER scenario: After an IOS XE image update, the route processor boots but a router retains an old package set because the team updated the boot variable without verifying install mode. The specific correction here is: Identify the running IOS XR platform and follow its supported installation and operational command workflow.

B:

A controlled process test restores the affected service while unrelated line-card forwarding remains stable where supported. This would validate ANOTHER scenario: An engineer assumes a process restart on an IOS XR control-plane node always reloads the entire router, causing an unnecessary maintenance outage. The specific correction here is: Identify the running IOS XR platform and follow its supported installation and operational command workflow.

D:

An authorized lab peer establishes an encrypted link and passes the intended L3 adjacency and data traffic. This would validate ANOTHER scenario: MACsec was enabled on only one end of a provider cross-connect, leaving the routed adjacency down with integrity errors. The specific correction here is: Identify the running IOS XR platform and follow its supported installation and operational command workflow.

Question 7

At a wholesale transit provider, an engineer examines: A technician deploys IOS XE package commands to an IOS XR route processor, then misinterprets the command rejection as a missing license. Which technical principle is most applicable?

  1. Boot configuration and package activation must match the software installation mode for the given IOS XE platform.
  2. Modular network operating systems may isolate process failures from overall forwarding and supervisor availability.
  3. An E-Line is a point-to-point Ethernet service whose service boundary must be explicit even when the underlying provider backbone uses routed transport.
  4. IOS XR has package and operational conventions that differ from traditional IOS and IOS XE.

Explanation

Correct Answer

D:

IOS XR has package and operational conventions that differ from traditional IOS and IOS XE. This explains the investigated issue: A technician deploys IOS XE package commands to an IOS XR route processor, then misinterprets the command rejection as a missing license. The approved corrective response is: Identify the running IOS XR platform and follow its supported installation and operational command workflow.

Incorrect Answers

A:

Boot configuration and package activation must match the software installation mode for the given IOS XE platform. That explains a DIFFERENT scenario: After an IOS XE image update, the route processor boots but a router retains an old package set because the team updated the boot variable without verifying install mode. The mechanism to prioritize for this question is: IOS XR has package and operational conventions that differ from traditional IOS and IOS XE.

B:

Modular network operating systems may isolate process failures from overall forwarding and supervisor availability. That explains a DIFFERENT scenario: An engineer assumes a process restart on an IOS XR control-plane node always reloads the entire router, causing an unnecessary maintenance outage. The mechanism to prioritize for this question is: IOS XR has package and operational conventions that differ from traditional IOS and IOS XE.

C:

An E-Line is a point-to-point Ethernet service whose service boundary must be explicit even when the underlying provider backbone uses routed transport. That explains a DIFFERENT scenario: A metro aggregation design places a latency-sensitive enterprise E-Line directly across an IP core with no documented Ethernet service handoff, leading to mismatched expectations for transparent VLAN carriage. The mechanism to prioritize for this question is: IOS XR has package and operational conventions that differ from traditional IOS and IOS XE.

Question 8

For a wholesale transit provider, the change record describes: A technician deploys IOS XE package commands to an IOS XR route processor, then misinterprets the command rejection as a missing license. What preventive validation should be standard?

  1. Include platform and release detection before network software maintenance automation.
  2. Document process-level recovery and escalation criteria separately from full reload procedures.
  3. Require postboot image attestation and rollback readiness in change acceptance.
  4. Run secret-scanning checks against network automation and management proxy logs.

Explanation

Correct Answer

A:

Include platform and release detection before network software maintenance automation. This helps prevent recurrence of the issue: A technician deploys IOS XE package commands to an IOS XR route processor, then misinterprets the command rejection as a missing license. Acceptance evidence should be: Software inventory and install-state readback confirm the intended package activation on the correct operating system.

Incorrect Answers

B:

Document process-level recovery and escalation criteria separately from full reload procedures. That is a sensible control for ANOTHER scenario: An engineer assumes a process restart on an IOS XR control-plane node always reloads the entire router, causing an unnecessary maintenance outage. It is less targeted to this issue than: Include platform and release detection before network software maintenance automation.

C:

Require postboot image attestation and rollback readiness in change acceptance. That is a sensible control for ANOTHER scenario: After an IOS XE image update, the route processor boots but a router retains an old package set because the team updated the boot variable without verifying install mode. It is less targeted to this issue than: Include platform and release detection before network software maintenance automation.

D:

Run secret-scanning checks against network automation and management proxy logs. That is a sensible control for ANOTHER scenario: A configuration pipeline invokes router REST APIs with bearer tokens embedded in URL parameters, which are copied into proxy logs. It is less targeted to this issue than: Include platform and release detection before network software maintenance automation.

Question 9

For a multi-region fiber backbone operator, the failure is: A service provider moves a virtualized firewall to a new NFV host but neglects to recreate the virtual interfaces and cannot forward subscriber traffic. Which authorized correction best addresses it?

  1. Persist required configuration in a supported durable data service or mounted volume and redeploy from versioned desired state.
  2. Use only the supported application-hosting environment with explicit CPU, memory, interface and lifecycle controls.
  3. Reapply the documented VNF connectivity, virtual switching and service-chain attachments on the new NFV infrastructure.
  4. Classify or remark traffic at the customer-provider handoff according to the contracted class-of-service policy.

Explanation

Correct Answer

C:

Reapply the documented VNF connectivity, virtual switching and service-chain attachments on the new NFV infrastructure. This directly addresses the fictional service-provider network case: A service provider moves a virtualized firewall to a new NFV host but neglects to recreate the virtual interfaces and cannot forward subscriber traffic. The technical mechanism is: A VNF requires both compute execution and correctly bound virtual networking to participate in a forwarding chain. Verify success by: Test packets traverse each intended virtual function and no alternate path bypasses the security service.

Incorrect Answers

A:

Persist required configuration in a supported durable data service or mounted volume and redeploy from versioned desired state. This would respond to a DIFFERENT fictional service-provider network issue: A provider stores a VNF configuration exclusively on the ephemeral container filesystem and loses subscriber policy after an orchestrator restarts the instance. It does not directly address the current situation: A service provider moves a virtualized firewall to a new NFV host but neglects to recreate the virtual interfaces and cannot forward subscriber traffic.

B:

Use only the supported application-hosting environment with explicit CPU, memory, interface and lifecycle controls. This would respond to a DIFFERENT fictional service-provider network issue: An operations team deploys an application container directly onto a router control processor without checking vendor-supported hosting resources or isolation limits. It does not directly address the current situation: A service provider moves a virtualized firewall to a new NFV host but neglects to recreate the virtual interfaces and cannot forward subscriber traffic.

D:

Classify or remark traffic at the customer-provider handoff according to the contracted class-of-service policy. This would respond to a DIFFERENT fictional service-provider network issue: A customer sends traffic already marked high priority and an access PE trusts every DSCP value, letting uncontracted backups crowd out voice queues. It does not directly address the current situation: A service provider moves a virtualized firewall to a new NFV host but neglects to recreate the virtual interfaces and cannot forward subscriber traffic.

Question 10

After fixing the following network problem, what should the team verify: A service provider moves a virtualized firewall to a new NFV host but neglects to recreate the virtual interfaces and cannot forward subscriber traffic.

  1. A simulated restart restores service with the approved subscriber policy intact.
  2. Peak-load tests meet packet loss and jitter objectives without unexpected host scheduling contention.
  3. Synthetic timing and delay tests remain within the RAN interface limits at full traffic load.
  4. Test packets traverse each intended virtual function and no alternate path bypasses the security service.

Explanation

Correct Answer

D:

Test packets traverse each intended virtual function and no alternate path bypasses the security service. This confirms the approved response: Reapply the documented VNF connectivity, virtual switching and service-chain attachments on the new NFV infrastructure. It is relevant because: A VNF requires both compute execution and correctly bound virtual networking to participate in a forwarding chain.

Incorrect Answers

A:

A simulated restart restores service with the approved subscriber policy intact. This would validate ANOTHER scenario: A provider stores a VNF configuration exclusively on the ephemeral container filesystem and loses subscriber policy after an orchestrator restarts the instance. The specific correction here is: Reapply the documented VNF connectivity, virtual switching and service-chain attachments on the new NFV infrastructure.

B:

Peak-load tests meet packet loss and jitter objectives without unexpected host scheduling contention. This would validate ANOTHER scenario: An NFV cluster oversubscribes CPU cores for a carrier-grade packet gateway, leading to jitter despite abundant average utilization headroom. The specific correction here is: Reapply the documented VNF connectivity, virtual switching and service-chain attachments on the new NFV infrastructure.

C:

Synthetic timing and delay tests remain within the RAN interface limits at full traffic load. This would validate ANOTHER scenario: A 5G fronthaul transport team treats a RAN radio-to-distributed-unit path as an ordinary best-effort internet uplink and sees timing instability during peak load. The specific correction here is: Reapply the documented VNF connectivity, virtual switching and service-chain attachments on the new NFV infrastructure.