McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 64

Question 630

An operator sees inconsistent OSPF neighbor formation on Gi0/1 and wants the effective Hello/Dead interval, area ID, cost, and network type for that interface. Which IOS command best shows them?

  1. `show ip ospf interface GigabitEthernet0/1`
  2. `show ip interface brief` only
  3. `show ip ospf neighbor` only
  4. `show running-config | include hostname`

Explanation

Correct Answer

A:

The detailed OSPF interface view reveals the operative timers, area and network type that affect adjacencies.

Incorrect Answers

B:

Brief IP interface output lacks OSPF timers, cost and area.

C:

Neighbor tables show peer state but not the full local interface timer and network attributes requested.

D:

A hostname filter has no bearing on operational OSPF interface parameters.

Question 631

A router uses OSPF to advertise a subnet connected to an interface marked passive. Neighbor Hellos are suppressed there, yet neighbors on another OSPF-enabled link still learn the subnet. Why?

  1. Passive changes the LAN into a switched VLAN trunk
  2. Passive automatically deletes the connected IPv4 route
  3. An interface needs an OSPF neighbor on every LAN to advertise that LAN
  4. Passive-interface controls neighbor formation without necessarily removing the subnet from LSAs

Explanation

Correct Answer

D:

A passive LAN can be advertised through OSPF while preventing adjacencies on the user-facing segment.

Incorrect Answers

A:

The OSPF setting does not determine Ethernet VLAN trunk mode.

B:

Marking an interface passive does not erase its connected route.

C:

OSPF can advertise a passive subnet through other participating interfaces.

Question 632

A router uses OSPF process 4 with `network 10.50.0.0 0.0.255.255 area 0`. It has interfaces 10.50.1.1 and 10.60.1.1. Which interface will the network statement enable for OSPF?

  1. Both interfaces regardless of their configured addresses.
  2. Only the 10.50.1.1 interface, because it matches the specified wildcard range.
  3. Neither interface unless both process numbers equal the area number.
  4. Only 10.60.1.1, because the subnet is numerically higher.

Explanation

Correct Answer

B:

Cisco OSPF network statements match local interface addresses and activate OSPF on matching interfaces.

Incorrect Answers

A:

10.60.1.1 is outside 10.50.0.0/16. An OSPF network statement affects only interfaces whose own IPv4 address matches the configured wildcard.

C:

OSPF process and area numbers do not have to equal each other.

D:

Numerical address ordering is not the wildcard match rule.

Question 633

On a routed point-to-point OSPFv2 interface, `show ip ospf interface` reports the expected area but a neighbor never progresses from DOWN. A packet capture shows no incoming protocol 89 packets from the peer. What is the first useful diagnostic direction?

  1. Re-elect a higher-priority DR on the point-to-point link
  2. Lower the local OSPF path metric by 10
  3. Change the local OSPF router ID to match the peer
  4. Verify peer-side OSPF enablement and that protocol 89 Hellos can traverse the transit

Explanation

Correct Answer

D:

With no OSPF Hellos received, check the peer process, interface participation and any ACL filtering protocol 89.

Incorrect Answers

A:

Point-to-point OSPF does not need DR/BDR election to establish adjacency.

B:

Cost affects path preference, not whether incoming Hellos are received.

C:

Duplicate router IDs break OSPF identity and will not repair missing Hellos.

Question 634

Three routers on a new broadcast segment have OSPF priorities all set to 50, and router IDs are 1.1.1.1, 2.2.2.2 and 3.3.3.3. Which becomes DR after a fresh complete election?

  1. The switch with the lowest Ethernet MAC address wins DR.
  2. All three become DR because priority matches.
  3. The router with 1.1.1.1, because the lowest ID wins.
  4. The router with router ID 3.3.3.3.

Explanation

Correct Answer

D:

With equal nonzero OSPF priorities, the highest router ID is the DR election tie-breaker.

Incorrect Answers

A:

Bridge MAC values affect STP root election, not OSPF DR election.

B:

A broadcast segment elects one DR, not one per equally eligible peer.

C:

OSPF DR router ID tie-break prefers the highest, not lowest ID.

Question 635

Two routed interfaces use the same area and matching timers, but R1 marks its transit Gi0/0 as passive. R2 never receives an OSPF Hello from R1. What fixes neighbor formation?

  1. Change only the OSPF route metric on R2.
  2. Lower R1’s DR priority to zero.
  3. Remove the passive-interface setting from R1’s transit interface.
  4. Make R2 passive as well.

Explanation

Correct Answer

C:

Passive-interface suppresses OSPF Hellos; a transit interface that should peer must be active.

Incorrect Answers

A:

Metric adjustments influence route costs, not whether Hellos are sent.

B:

Priority zero affects DR eligibility and still does not override a passive state.

D:

Making both ends passive would suppress Hellos on both, not form adjacency.

Question 636

A transit link has OSPFv2 area 0 enabled through an interface-level `ip ospf 12 area 0` command. Another engineer adds `network 0.0.0.0 255.255.255.255 area 1` under the process. What should be checked before assuming the interface moved to area 1?

  1. Assume all interface addresses automatically belong to area 1 with no verification
  2. Inspect the effective interface OSPF area and interface-level configuration
  3. Set all OSPF interface costs to zero to override the area
  4. Replace the OSPF process with RIP to confirm the area

Explanation

Correct Answer

B:

Interface-level OSPF activation can determine the specific area independent of a broader router-process network statement.

Incorrect Answers

A:

A broad network statement does not justify ignoring an existing interface-level area assignment.

C:

Interface cost influences SPF path selection, not the area membership setting.

D:

RIP does not use OSPF areas and is not a diagnostic correction.

Question 637

Two distribution switches share a user VLAN. Users need one default gateway that survives the loss of either switch. What architecture should be implemented?

  1. An eligible standby FHRP router can take over if the active member fails
  2. FHRP interface or object tracking to reduce priority after upstream failure
  3. Configure a shared virtual default-gateway IP through a first-hop redundancy group
  4. A current active FHRP router forwards traffic for the virtual gateway

Explanation

Correct Answer

C:

An FHRP virtual gateway provides one stable host-facing next-hop identity with redundancy.

Incorrect Answers

A:

FHRP backup members monitor active service and can assume forwarding on loss; for a two-switch user VLAN needing one survivable default gateway address, the relevant operation is building a redundant gateway identity for the clients, not failover to a surviving standby after active failure.

B:

Tracking can trigger role change when the active router loses important upstream reachability; for a two-switch user VLAN needing one survivable default gateway address, the relevant operation is building a redundant gateway identity for the clients, not reacting to loss of upstream reachability while LAN remains up.

D:

The active forwarding router handles packets for the shared virtual gateway on its VLAN; for a two-switch user VLAN needing one survivable default gateway address, the relevant operation is building a redundant gateway identity for the clients, not identifying which current member forwards gateway traffic.

Question 638

An HSRP group has one active device and one standby device. Which device forwards packets sent to the group virtual MAC under normal operation?

  1. A current active FHRP router forwards traffic for the virtual gateway
  2. An eligible standby FHRP router can take over if the active member fails
  3. VRRP as a standards-based first-hop redundancy protocol
  4. FHRP interface or object tracking to reduce priority after upstream failure

Explanation

Correct Answer

A:

The active HSRP router provides forwarding for the group virtual default gateway.

Incorrect Answers

B:

FHRP backup members monitor active service and can assume forwarding on loss; for normal HSRP packet forwarding to the shared virtual MAC, the relevant operation is identifying which current member forwards gateway traffic, not failover to a surviving standby after active failure.

C:

VRRP is a standards-based first-hop gateway redundancy protocol; for normal HSRP packet forwarding to the shared virtual MAC, the relevant operation is identifying which current member forwards gateway traffic, not meeting the standards-based multi-vendor VRRP requirement.

D:

Tracking can trigger role change when the active router loses important upstream reachability; for normal HSRP packet forwarding to the shared virtual MAC, the relevant operation is identifying which current member forwards gateway traffic, not reacting to loss of upstream reachability while LAN remains up.

Question 639

An HSRP active gateway fails completely; the standby has been receiving hello messages and is eligible. What should happen?

  1. Point each host at the FHRP virtual IP, not one router physical interface IP
  2. An eligible standby FHRP router can take over if the active member fails
  3. A current active FHRP router forwards traffic for the virtual gateway
  4. Preemption when the preferred higher-priority gateway should retake active role

Explanation

Correct Answer

B:

The standby can assume the active role and continue servicing the virtual gateway.

Incorrect Answers

A:

Using a virtual gateway lets hosts keep one default-gateway address during active-router failure; for HSRP standby takeover after the active gateway fails completely, the relevant operation is failover to a surviving standby after active failure, not making each client actually rely on the failover-capable gateway.

C:

The active forwarding router handles packets for the shared virtual gateway on its VLAN; for HSRP standby takeover after the active gateway fails completely, the relevant operation is failover to a surviving standby after active failure, not identifying which current member forwards gateway traffic.

D:

Preempt enables an eligible preferred router to regain the active role after recovery; for HSRP standby takeover after the active gateway fails completely, the relevant operation is failover to a surviving standby after active failure, not restoring a preferred router to active status automatically.

Question 640

A campus standard explicitly requires Cisco's proprietary first-hop redundancy protocol rather than the standards-based VRRP alternative. The two gateways must provide one active/standby virtual IPv4 gateway for clients. Which protocol meets that vendor-specific requirement?

  1. FHRP interface or object tracking to reduce priority after upstream failure
  2. VRRP as a standards-based first-hop redundancy protocol
  3. HSRP as a Cisco first-hop redundancy protocol
  4. Point each host at the FHRP virtual IP, not one router physical interface IP

Explanation

Correct Answer

C:

HSRP is Cisco's proprietary hot-standby protocol for an active/standby virtual gateway. Its Cisco-specific design is the discriminating constraint; VRRP can provide similar redundancy but is standards-based.

Incorrect Answers

A:

Tracking can lower a gateway's effective HSRP priority after upstream loss; it is an adjunct to an FHRP, not the protocol chosen by the stated Cisco-proprietary requirement.

B:

VRRP supplies a standards-defined virtual-router election and could protect a gateway, but the scenario requires Cisco's proprietary HSRP protocol instead.

D:

Pointing clients to a virtual default gateway is required for the redundant design, but changing host settings does not select or instantiate Cisco's HSRP protocol.