McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 63

Question 620

Two links are 10 Gbps and 1 Gbps, but both receive the same default OSPF cost under an old reference bandwidth. Which adjustment enables useful cost distinction?

  1. Change the local OSPF process number from 10 to 1000.
  2. Increase the OSPF dead interval to 40 seconds only on the faster link.
  3. Lower switch access VLAN IDs on the uplinks.
  4. Increase OSPF auto-cost reference-bandwidth consistently on all routers in the domain.

Explanation

Correct Answer

D:

OSPF auto-cost derives interface cost from reference bandwidth; a higher consistent reference can differentiate higher-speed links.

Incorrect Answers

A:

Process ID names local routing instances and does not change interface metric math.

B:

Timers control neighbor liveness and must agree; they do not establish link bandwidth cost.

C:

VLAN numbers do not set OSPF reference bandwidth.

Question 621

The OSPFv2 process already selected router ID 1.1.1.1. An engineer adds `router-id 2.2.2.2` under the process but the operational ID remains unchanged. What is required?

  1. Delete every IPv4 connected route to reassign the router ID.
  2. Restart or clear the OSPF process so the newly configured router ID becomes active.
  3. Change the local switchport voice VLAN number.
  4. Wait for the ARP cache to expire only.

Explanation

Correct Answer

B:

Router ID is chosen when the OSPF process initializes; a newly configured router ID often needs process reset to take effect.

Incorrect Answers

A:

Removing connected routes is destructive and not required for explicit router-id activation.

C:

Voice VLAN settings do not alter OSPF process identity.

D:

ARP cache expiration does not reinitialize the OSPF router ID.

Question 622

OSPF area 0 is enabled on R2 Gi0/1, but `passive-interface default` is configured and the link to R1 remains neighborless. The LAN’s subnet must still be advertised. Which OSPF process action restores adjacency only on that transit?

  1. Remove the network statement for Gi0/1
  2. Configure no passive-interface GigabitEthernet0/1 under router ospf
  3. Set OSPF priority 255 on every user access VLAN
  4. Convert Gi0/1 to a switchport access VLAN

Explanation

Correct Answer

B:

This exception permits Hello exchange on the transit while other passive connected networks remain advertised.

Incorrect Answers

A:

That would stop OSPF participation and advertisement on the transit rather than build a neighbor.

C:

DR eligibility does not override a passive interface’s Hello suppression.

D:

Changing interface mode does not undo the OSPF process passive policy.

Question 623

Two routers use an OSPF point-to-point Ethernet link with R1 at 192.0.2.1/30 and R2 at 192.0.2.6/30. They hear link-layer connectivity but no FULL adjacency. Which IP addressing correction is required?

  1. Keep R1 at .1/30 and R2 at .6/30 and only raise DR priority.
  2. Make both routers use 192.0.2.1/30.
  3. Set a different OSPF process number on both devices.
  4. Place both addresses in the same appropriate IPv4 connected /30 subnet.

Explanation

Correct Answer

D:

The /30 .0–.3 and .4–.7 are separate subnets; neighbors must share the intended link subnet.

Incorrect Answers

A:

DR priority does not fix an IP subnet mismatch on a point-to-point link.

B:

Duplicate IP addresses create an addressing collision rather than a valid two-router adjacency.

C:

Local process numbers may differ and are not the cause of this link subnet mismatch.

Question 624

Two OSPFv2 interfaces are in area 0 with matching timers and masks. Packet captures show authentication failures because their configured OSPF authentication keys differ. What must be aligned?

  1. The DR priority must be zero on both routers.
  2. The ethernet switch trunk native VLAN must change despite a working L3 link.
  3. The local process IDs must be numerically equal.
  4. Compatible authentication method and matching shared keys on the two interfaces.

Explanation

Correct Answer

D:

OSPF authentication must verify successfully on both sides before a trusted adjacency can form.

Incorrect Answers

A:

Making routers DR-ineligible does not fix failed authentication.

B:

A successful IP link does not imply a native VLAN mismatch caused the authentication failure.

C:

Matching process ID is not required across two separate routers.

Question 625

An OSPFv2 broadcast LAN has three routers, and all three interfaces are set to OSPF priority 0. They exchange Hellos but no router is eligible to become DR or BDR. What change restores DR/BDR election eligibility?

  1. Set every router to the same numeric OSPF router ID
  2. Configure a larger local OSPF process number on one router
  3. Make every interface passive so that Hellos stop
  4. Set the OSPF interface priority above zero on at least one eligible router

Explanation

Correct Answer

D:

OSPF priority zero makes an interface ineligible for DR/BDR; a positive priority creates an eligible candidate when normal election occurs.

Incorrect Answers

A:

An OSPF router ID must be unique; making every ID identical breaks the control-plane identity model.

B:

Local OSPF process identifiers do not decide which neighbor is eligible to be DR.

C:

Passive configuration suppresses neighbor discovery and cannot create a broadcast DR election.

Question 626

Two OSPFv2 routers on the same Ethernet broadcast VLAN show the neighbor state 2-WAY/DROTHER. Both already have FULL adjacency with the DR. How should this particular 2-WAY relationship be interpreted?

  1. It proves area IDs on the two routers differ
  2. It can be normal between two DROTHER routers on a broadcast multiaccess network
  3. It means the two routers are simultaneously elected DR
  4. It must be corrected by disabling all OSPF Hellos

Explanation

Correct Answer

B:

Non-DR neighbors do not always build full database adjacency with each other; both normally synchronize with DR/BDR.

Incorrect Answers

A:

An area mismatch normally prevents successful neighbor formation in the first place.

C:

DROTHER explicitly means neither router is the DR or BDR.

D:

Suppressing Hellos would destroy neighbor relationships, not improve a healthy DROTHER state.

Question 627

DIST1 detects that a neighbor in the same OSPF domain advertises the same router ID 10.10.136.1 that DIST1 uses. Which action directly resolves the conflicting router identities?

  1. Increase the OSPF interface cost on DIST1 without changing router identities
  2. Assign a different unique router ID on one router and apply it through a controlled OSPF process restart
  3. Make the local and neighboring OSPF process numbers identical
  4. Disable all OSPF Hello messages while leaving both router IDs unchanged

Explanation

Correct Answer

B:

Router IDs must be unique within an OSPF routing domain; an explicit unique identifier is used after the affected process restarts.

Incorrect Answers

A:

Interface cost influences route preference but leaves the duplicate LSDB router identifier unresolved.

C:

OSPF process IDs are locally significant and do not resolve a duplicate 32-bit router ID.

D:

Disabling Hellos prevents neighbor formation instead of correcting the duplicate router-ID condition.

Question 628

A router receives no Hellos from a previously FULL OSPFv2 peer for longer than the negotiated dead interval. What should it do?

  1. Declare the neighbor down and recalculate affected routes as appropriate.
  2. Turn off the route table to avoid convergence.
  3. Continue using the neighbor indefinitely without tracking liveness.
  4. Change the OSPF process number to the peer’s number.

Explanation

Correct Answer

A:

The OSPF dead interval is the time threshold for neighbor liveness; expiry triggers adjacency loss and SPF updates.

Incorrect Answers

B:

Clearing routing entirely is not normal OSPF neighbor-failure handling.

C:

Ignoring the negotiated liveness threshold risks forwarding toward an unreachable peer.

D:

Process numbering is unrelated to timed neighbor failure detection.

Question 629

R1 has OSPF interface priority 0 on a broadcast LAN, while R2 is DR. Which statement is correct about R1?

  1. R1 may form a FULL adjacency with the DR but cannot be elected DR or BDR.
  2. Priority 0 automatically makes R1 the preferred DR.
  3. R1 is barred from any OSPF neighbor adjacency.
  4. Priority 0 disables all OSPF Hello packets.

Explanation

Correct Answer

A:

Priority zero means DR/BDR ineligibility, not prohibition on discovering or fully adjoining to the elected DR.

Incorrect Answers

B:

DR election prefers higher nonzero priorities, not zero.

C:

A priority-0 DROTHER can still exchange LSAs with a DR.

D:

The interface still runs OSPF Hellos unless separately made passive or disabled.

Question 630

An operator sees inconsistent OSPF neighbor formation on Gi0/1 and wants the effective Hello/Dead interval, area ID, cost, and network type for that interface. Which IOS command best shows them?

  1. `show ip ospf interface GigabitEthernet0/1`
  2. `show ip interface brief` only
  3. `show ip ospf neighbor` only
  4. `show running-config | include hostname`

Explanation

Correct Answer

A:

The detailed OSPF interface view reveals the operative timers, area and network type that affect adjacencies.

Incorrect Answers

B:

Brief IP interface output lacks OSPF timers, cost and area.

C:

Neighbor tables show peer state but not the full local interface timer and network attributes requested.

D:

A hostname filter has no bearing on operational OSPF interface parameters.