McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 53

Question 520

A maintenance server at 2001:db8:31::77 needs a one-address static IPv6 path through 2001:db8:1c::2. Which exact IOS route should be installed?

  1. ipv6 route 2001:db8:31::77/64 2001:db8:1c::2
  2. ipv6 route ::/0 2001:db8:1c::2
  3. ip route 2001:db8:31::77 255.255.255.255 192.0.2.44
  4. ipv6 route 2001:db8:31::77/128 2001:db8:1c::2

Explanation

Correct Answer

D:

A /128 IPv6 static route selects exactly one IPv6 address.

Incorrect Answers

A:

A /64 IPv6 route can match many addresses rather than a single host.

B:

An IPv6 /0 default route has far broader scope.

C:

IPv4 ip route commands do not accept IPv6 destination addresses.

Question 521

After installing a backup route to 172.20.54.0/24 on SW1, the operator needs to verify installed IPv4 static entries, not just interface line status. Which command should be used?

  1. show spanning-tree summary
  2. show vlan brief
  3. show ip route static
  4. show interfaces status

Explanation

Correct Answer

C:

show ip route static specifically displays IPv4 static routing entries in the IP forwarding table.

Incorrect Answers

A:

Spanning-tree controls loop prevention, not IPv4 static route entries.

B:

VLAN lists do not show the installed Layer 3 static route table.

D:

Ethernet interface status does not identify the entire static routing table.

Question 522

On R1, an IPv4 static route for 172.20.59.0/24 points at 192.0.2.58, but no connected or learned route reaches 192.0.2.58. What prerequisite should be corrected?

  1. Assume an unreachable next hop still gives a working forwarding path
  2. Ensure the configured next hop is reachable through a valid connected or recursively resolved route
  3. Set the static route destination to the router hostname
  4. Delete all connected interfaces to prioritize the static route

Explanation

Correct Answer

B:

A recursive static route requires a resolvable path to its next hop or egress interface before it can forward.

Incorrect Answers

A:

An unreachable next hop leaves the static route unresolved or unusable for forwarding.

C:

Static route destinations are IP prefixes, not router hostnames.

D:

Removing connected routes can prevent next-hop resolution.

Question 523

At a retail store, ACCESS1 has a point-to-point routed interface Gi0/0 to the next router. What IPv4 static-route form forwards 172.20.64.0/24 out that interface?

  1. ip route 172.20.64.0 0.0.0.0 GigabitEthernet0/0
  2. ip route 172.20.64.0 255.255.255.0 Vlan 64
  3. ip route 172.20.64.0 255.255.255.0 GigabitEthernet0/0
  4. ipv6 route 172.20.64.0/24 GigabitEthernet0/0

Explanation

Correct Answer

C:

A directly attached point-to-point egress can be specified as the outgoing interface in an IPv4 static route.

Incorrect Answers

A:

A 0.0.0.0 mask does not encode the required /24 destination route.

B:

This syntax is invalid for the desired egress interface and could select a different logical port.

D:

The ipv6 route command cannot install an IPv4 destination prefix.

Question 524

A router needs a narrowly scoped backup path for subnet 172.20.69.0/24 through router 192.0.2.72 without changing any other destinations. Which route design matches the requirement?

  1. Configure only a MAC-table static entry for the next-hop device
  2. Use a static 0.0.0.0/0 route and ignore more-specific reachability to 172.20.69.0
  3. Set destination mask to /16 so the static covers unrelated networks
  4. Use a static route with destination prefix 172.20.69.0/24 and next hop 192.0.2.72, then verify with show ip route

Explanation

Correct Answer

D:

A specific routed destination and a reachable next hop determine deterministic Layer 3 forwarding toward that subnet.

Incorrect Answers

A:

MAC table entries affect Layer 2 forwarding and cannot substitute for an IPv4 static route.

B:

A default route is unnecessarily broad and may alter other traffic, unlike the requested /24.

C:

A /16 route covers many subnets and violates the limited prefix requirement.

Question 525

An OSPF route to 10.82.0.0/16 has AD 110. The branch needs an IPv4 backup via 192.0.2.14 that is installed only after that OSPF route disappears. Which command sets an appropriate floating static route?

  1. ip route 10.82.0.0 255.255.0.0 192.0.2.14 150
  2. ip route 10.82.0.0 255.255.0.0 192.0.2.14 1
  3. ip route 10.82.0.0 255.255.255.0 192.0.2.14 150
  4. ip route 10.82.0.0 255.255.0.0 192.0.2.14 100

Explanation

Correct Answer

A:

AD 150 is worse than OSPF AD 110 for the same prefix, so it can serve as the backup when OSPF withdraws.

Incorrect Answers

B:

AD 1 would normally displace the OSPF route rather than float behind it.

C:

A /24 destination is not the requested /16 and would alter forwarding coverage.

D:

AD 100 is better than 110 and therefore not a backup to this OSPF path.

Question 526

R1 has a point-to-point serial WAN interface Serial0/0/0 to the only ISP. Policy requires a default IPv4 route naming that exit interface directly rather than an IP next hop. Which command fits?

  1. `ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/1`
  2. `ipv6 route ::/0 Serial0/0/0`
  3. `ip route 0.0.0.0 0.0.0.0 Serial0/0/0`
  4. `ip route 0.0.0.0 255.255.255.255 Serial0/0/0`

Explanation

Correct Answer

C:

The requested IPv4 default route is a /0 and the point-to-point serial interface is its configured exit.

Incorrect Answers

A:

Gi0/1 is not the specified ISP transit interface in this topology.

B:

ipv6 route configures an IPv6 default, not the required IPv4 one.

D:

A /32 mask would describe one address, not the IPv4 default route.

Question 527

An IPv6 static route to 2001:db8:90::/48 uses next hop fe80::2 on Ethernet0/0. IOS rejects the route if the next-hop address alone is provided. Which form specifies the scoped neighbor correctly?

  1. ipv6 route 2001:db8:90::/48 Ethernet0/0 fe80::2
  2. ipv6 route 2001:db8:90::/48 fe80::2
  3. ip route 2001:db8:90::/48 Ethernet0/0 fe80::2
  4. ipv6 address 2001:db8:90::/48 Ethernet0/0

Explanation

Correct Answer

A:

A link-local IPv6 next hop needs the outgoing interface to resolve its link scope correctly.

Incorrect Answers

B:

A bare link-local next hop is ambiguous across interfaces and is insufficient on IOS.

C:

The IPv4 ip route command does not accept IPv6 prefixes or next hops.

D:

This assigns an address rather than installing a destination route.

Question 528

An IPv4 static route is configured using only an Ethernet exit interface toward a shared multiaccess LAN. Why might specifying a valid next-hop IP also be beneficial?

  1. It identifies the intended neighboring router instead of relying on ARP resolution for remote destinations
  2. It converts the route into an OSPF route
  3. It disables Ethernet ARP entirely for every packet
  4. It makes the prefix more specific without changing its mask

Explanation

Correct Answer

A:

On Ethernet, specifying a concrete next hop avoids unnecessary per-destination ARP behavior associated with interface-only static routes.

Incorrect Answers

B:

The route remains statically configured regardless of next-hop notation.

C:

Ethernet next-hop forwarding still uses neighbor Layer 2 resolution.

D:

Next-hop selection does not alter route destination prefix length.

Question 529

Branch-1 reaches 10.60.20.0/23 through a transit neighbor 192.0.2.10. Which Cisco IOS command creates the network static route without overriding other destinations?

  1. `ip route 0.0.0.0 0.0.0.0 192.0.2.10`
  2. `ip route 10.60.20.0 255.255.255.0 192.0.2.10`
  3. `ipv6 route 10.60.20.0/23 192.0.2.10`
  4. `ip route 10.60.20.0 255.255.254.0 192.0.2.10`

Explanation

Correct Answer

D:

/23 corresponds to 255.255.254.0 and the neighbor is the IPv4 next hop for only that network.

Incorrect Answers

A:

A default route affects unmatched destinations beyond the requested site.

B:

/24 covers only half of the requested /23 segment.

C:

ipv6 route cannot configure an IPv4 prefix or IPv4 next hop.

Question 530

The requirement is to forward only 192.168.99.0/24 through a site VPN, but the engineer enters `ip route 192.168.0.0 255.255.0.0 10.1.1.2`. What issue does the command create?

  1. The /16 route matches a much broader range than the intended /24
  2. It exactly matches the /24 requirement
  3. It creates an IPv6 route to the remote site
  4. It is a /32 host route to 192.168.99.0

Explanation

Correct Answer

A:

The configured mask covers all 192.168.x.x networks, not only 192.168.99.0.

Incorrect Answers

B:

A /16 encompasses 256 distinct /24 networks and is not equivalent to /24.

C:

The command is for an IPv4 static route.

D:

The mask has sixteen one-bits, not thirty-two.