McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 54

Question 530

The requirement is to forward only 192.168.99.0/24 through a site VPN, but the engineer enters `ip route 192.168.0.0 255.255.0.0 10.1.1.2`. What issue does the command create?

  1. The /16 route matches a much broader range than the intended /24
  2. It exactly matches the /24 requirement
  3. It creates an IPv6 route to the remote site
  4. It is a /32 host route to 192.168.99.0

Explanation

Correct Answer

A:

The configured mask covers all 192.168.x.x networks, not only 192.168.99.0.

Incorrect Answers

B:

A /16 encompasses 256 distinct /24 networks and is not equivalent to /24.

C:

The command is for an IPv4 static route.

D:

The mask has sixteen one-bits, not thirty-two.

Question 531

A router has a normal static route to 172.18.30.0/24 using neighbor 192.0.2.2 and wants a backup through 198.51.100.2 that installs only after the primary disappears. Which command meets this requirement?

  1. `ip route 172.18.30.0 255.255.255.0 198.51.100.2 200`
  2. `ip route 172.18.30.0 255.255.255.0 198.51.100.2 1`
  3. `ip route 172.18.30.0 255.255.255.0 198.51.100.2`
  4. `ip route 172.18.30.0 255.255.255.0 198.51.100.2 0`

Explanation

Correct Answer

A:

An administratively distant static route (AD 200) stays behind a primary AD 1 static route for the same prefix.

Incorrect Answers

B:

Equal AD 1 creates an equal-distance candidate rather than strictly floating backup.

C:

Omitting AD leaves standard static AD 1, competing with the intended primary.

D:

AD 0 would be preferred, not act as a backup route.

Question 532

A branch must forward all IPv6 traffic with no more-specific match toward its upstream router with global next-hop 2001:db8:feed::2. Which static route serves as the IPv6 default?

  1. ipv6 route ::/0 2001:db8:feed::2
  2. ipv6 route ::/128 2001:db8:feed::2
  3. ip route 0.0.0.0 0.0.0.0 2001:db8:feed::2
  4. ipv6 address 2001:db8:feed::2/64

Explanation

Correct Answer

A:

The destination ::/0 matches any IPv6 address not covered by a more-specific installed route.

Incorrect Answers

B:

The /128 route targets only the unspecified address, not the IPv6 destination space.

C:

IPv4 default-route syntax cannot use an IPv6 next-hop address.

D:

The address command configures an interface identity, not a default route.

Question 533

A remote management server 10.24.10.57 must use an alternate next hop 192.0.2.9, while the rest of 10.24.10.0/24 follows OSPF. Which static route affects only that single server?

  1. ip route 10.24.10.0 255.255.255.0 192.0.2.9
  2. ip route 10.24.10.57 255.255.0.0 192.0.2.9
  3. ip route 10.24.10.57 255.255.255.255 192.0.2.9
  4. ip route 0.0.0.0 0.0.0.0 192.0.2.9

Explanation

Correct Answer

C:

A /32 host route matches only the server, overriding a less-specific /24 for that destination.

Incorrect Answers

A:

A /24 route would cover every host in the subnet, not just the server.

B:

The /16 mask broadens the route to other subnets and is not a single-host override.

D:

A default route cannot selectively divert a single host while preserving other traffic.

Question 534

A router is connected to a multiaccess Ethernet link and the next router is 203.0.113.10. A technician configured `ip route 10.60.0.0 255.255.0.0 Gi0/0`, which causes excessive ARP for remote hosts. What is a more suitable fully specified form?

  1. ip route 10.60.0.0 255.255.0.0 Gi0/0
  2. ip route 10.60.0.0 255.255.0.0 Gi0/0 203.0.113.10
  3. ip route 10.60.0.0 255.255.255.0 Gi0/0 203.0.113.10
  4. ip route 0.0.0.0 0.0.0.0 Gi0/0

Explanation

Correct Answer

B:

The explicit next hop and egress interface direct ARP toward the real neighbor instead of treating remote destinations as directly attached.

Incorrect Answers

A:

The existing exit-interface-only form on Ethernet can lead to undesirable ARP for destinations.

C:

The /24 mask does not cover the required /16 network.

D:

A broad exit-interface-only default does not fix the specific next-hop design concern.

Question 535

Before failure, an OSPF route for 10.55.0.0/16 has AD 110 and a matching static route has AD 210. After the OSPF neighbor fails and the route is withdrawn, what can happen to the static route?

  1. The higher-AD static route can become active if its next hop is reachable
  2. It must remain inactive forever because its AD was once higher
  3. It automatically becomes a connected route with AD 0
  4. It becomes an IPv6 route without configuration changes

Explanation

Correct Answer

A:

The static backup is eligible once the preferred OSPF route is no longer installed.

Incorrect Answers

B:

Administrative distance is compared among currently available routes.

C:

A static route does not change its origin or administrative distance when OSPF withdraws.

D:

An IPv4 route never changes address family due to a neighbor failure.

Question 536

An engineer enters `ip route 10.44.18.61 255.255.255.0 192.0.2.20`. The intent is a static route to the entire 10.44.18.0/24 LAN. Which correction uses the canonical network ID?

  1. ip route 10.44.18.255 255.255.255.0 192.0.2.20
  2. ip route 10.44.18.0 255.255.255.0 192.0.2.20
  3. ip route 10.44.18.61 255.255.255.255 192.0.2.20
  4. ip route 10.44.0.0 255.255.0.0 192.0.2.20

Explanation

Correct Answer

B:

A network route for /24 uses the network address with all host bits zero.

Incorrect Answers

A:

The .255 address is a /24 directed broadcast and is not the canonical network ID.

C:

That installs a host route for .61, not the requested entire /24.

D:

A /16 would route far more addresses than the intended /24 LAN.

Question 537

R2 learns an OSPFv2 default route with administrative distance 110. A secondary ISP path through 192.0.2.21 must act only when that OSPF default disappears. Which candidate static route is appropriate?

  1. `ip route 192.0.2.0 255.255.255.0 192.0.2.21 200`
  2. `ip route 0.0.0.0 0.0.0.0 192.0.2.21 1`
  3. `ip route 0.0.0.0 0.0.0.0 192.0.2.21 200`
  4. `ip route 0.0.0.0 0.0.0.0 192.0.2.21 90`

Explanation

Correct Answer

C:

An administrative distance of 200 is higher than OSPF 110, so this default route floats as backup.

Incorrect Answers

A:

The given /24 route is not the default prefix 0.0.0.0/0.

B:

AD 1 would make the static default preferred ahead of OSPF.

D:

AD 90 is also better than OSPF 110 and would not act as a standby.

Question 538

The router configuration includes `ip route 10.77.1.0 255.255.255.0 192.0.2.230`, but `show ip route static` does not list that prefix. An RIB check cannot resolve 192.0.2.230. What explains the missing installed route?

  1. The static next hop is not recursively resolvable through the active routing table
  2. Every configured static route is automatically present in the RIB
  3. The route cannot be installed because AD 1 is too high for a static route
  4. The static route is invalid because /24 is not supported by IOS

Explanation

Correct Answer

A:

A next-hop static route needs an active path to its next hop before it can be installed for forwarding.

Incorrect Answers

B:

Configuration alone does not imply that a route with an unreachable next hop is active.

C:

AD 1 is the normal low default for static routes and does not cause the stated unresolved next hop.

D:

A /24 network route is perfectly valid; the failure concerns next-hop resolution.

Question 539

An engineer tries to configure an `ip route` on a Layer 2 switch solely to let administrators manage it from a different subnet. IP routing is not enabled. What configuration is commonly required for this L2 management use case?

  1. Enable OSPF on every access port
  2. Configure an IPv6 address on the router and leave the switch with no default gateway
  3. Configure an IP default gateway for the management SVI
  4. Convert every user-facing port into a routed interface

Explanation

Correct Answer

C:

A Layer 2 switch ordinarily uses ip default-gateway for management traffic outside its local management subnet.

Incorrect Answers

A:

OSPF is not needed for a basic Layer 2 management SVI.

B:

An unrelated router address does not let the switch reach off-subnet management hosts.

D:

That changes switching design and is unnecessary for L2 switch management.

Question 540

An IPv6 router must reach 2001:db8:900::/64 using link-local neighbor fe80::5 on Gi0/1. Which route specifies enough next-hop scope?

  1. `ipv6 route 2001:db8:900::/64 fe80::5`
  2. `ip route 2001:db8:900::/64 GigabitEthernet0/1 fe80::5`
  3. `ipv6 route 2001:db8:900::/64 GigabitEthernet0/1 fe80::5`
  4. `ipv6 route ::/0 GigabitEthernet0/1 fe80::5`

Explanation

Correct Answer

C:

Cisco IOS static routing with a link-local IPv6 next hop requires the outgoing interface to resolve link-local scope.

Incorrect Answers

A:

A link-local next hop alone lacks the interface context to identify the intended neighbor.

B:

IPv4 ip route syntax does not configure IPv6 static routes.

D:

::/0 is a default route, broadening the forwarding target beyond 2001:db8:900::/64.