McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 51

Question 500

A switch has an operational connected C 10.3.14.0/24 (AD 0), and an engineer configures static S 10.3.14.0/24 (AD 1) via another router. With the local interface up, what is the ordinary route preference?

  1. Connected C route at AD 0
  2. Static S route because it has a manually named next hop
  3. OSPF route with an unrelated lower metric
  4. The gateway of last resort regardless of mask

Explanation

Correct Answer

A:

For the same /24, the active connected route has lower administrative distance than a normal static.

Incorrect Answers

B:

Manual configuration alone does not make AD 1 preferred over AD 0.

C:

No OSPF candidate was supplied; a lower OSPF cost cannot override the existing connected prefix.

D:

The default /0 does not override an exact /24.

Question 501

For prefix 10.65.1.0/24, a router may learn OSPF [110/20], RIP [120/1], and floating static [180/0] from separate reachable peers. Which candidate is highest ranked by source preference?

  1. RIP because hop count 1 is smaller than OSPF cost 20
  2. OSPF at administrative distance 110
  3. The static because its metric is zero
  4. All three candidates are always installed equally

Explanation

Correct Answer

B:

OSPF AD 110 is lower than RIP 120 and the deliberately floating static 180 for this same prefix.

Incorrect Answers

A:

Metrics are protocol-specific and do not override differing AD values.

C:

Static metric zero does not make an explicitly AD 180 route win against AD 110.

D:

Different AD values do not form an equal-preference multipath set.

Question 502

A disaster-recovery route to 192.168.120.0/24 is configured as floating static AD 230, while the same prefix is learned by OSPF AD 110. What happens before OSPF loss?

  1. The OSPF route remains preferred; the floating static is a backup
  2. The static backup is preferred because 230 is closer to 255
  3. The router installs the backup because the word static always beats OSPF
  4. Neither source is installed because their AD values differ

Explanation

Correct Answer

A:

The same-prefix static route has a much higher AD and should wait until the preferred route is unavailable.

Incorrect Answers

B:

Larger AD is less preferred; 255 is unusable.

C:

A configured administrative distance overrides the normal static AD 1.

D:

Differing AD is normal when the RIB selects a best same-prefix path.

Question 503

A route for 203.0.113.0/24 is available as OSPF [110/55] and RIP [120/2], both resolved, with identical prefix length. Which preference rule applies?

  1. OSPF wins because AD 110 is lower than RIP AD 120
  2. RIP wins because 2 is less than 55
  3. Both paths automatically use per-packet load sharing
  4. The local /32 route always wins even though none was listed

Explanation

Correct Answer

A:

Administrative distance compares different routing sources; RIP hop count 2 is not comparable to OSPF cost 55.

Incorrect Answers

B:

Two different protocol metrics are not compared before AD.

C:

Different AD values do not imply equal-cost installed routes.

D:

A local route matters only if it actually matches the destination and is installed.

Question 504

A network engineering change adds a highly untrusted static route to 198.18.10.0/24 with AD 250 while an OSPF AD 110 route for the same prefix works. How does IOS prefer the two?

  1. Use the OSPF candidate with AD 110
  2. Use the static route because static routes always have AD 1
  3. Use the source with fewer configuration commands
  4. Route to the default gateway first because the static AD is 250

Explanation

Correct Answer

A:

The high-AD static is a last-resort candidate compared with the OSPF route for the exact same prefix.

Incorrect Answers

B:

The engineer explicitly overrode its default distance to 250.

C:

Configuration length does not control route source preference.

D:

An installed matching /24 OSPF prefix is more specific than a default route.

Question 505

A normal OSPF route [110/3] and a deliberately preferred static path [90/0] target precisely 10.49.4.0/24. The static next hop is currently reachable. Which route wins?

  1. The custom static route with AD 90
  2. The OSPF route because a metric of 3 denotes three nearby hops
  3. Both routes as equal-cost paths because they share a prefix
  4. The route whose next-hop IP address is numerically smallest

Explanation

Correct Answer

A:

For equal prefixes, administrative distance 90 outranks OSPF AD 110 even if OSPF cost is small.

Incorrect Answers

B:

The OSPF metric is considered within OSPF and does not overcome its worse AD.

C:

Identical prefix alone is insufficient for equal-preference multipath with different AD.

D:

Numerical IP value is not the route-selection preference criterion.

Question 506

A router previously used O 10.12.32.0/24 via 192.0.2.15 for a finance server. The OSPF neighbor fails and withdraws that route; S* 0.0.0.0/0 via 192.0.2.20 remains. No other route covers 10.12.32.40. What happens next?

  1. The packet follows the remaining default next hop 192.0.2.20
  2. It is sent to the withdrawn neighbor 192.0.2.15
  3. It is delivered locally as the router’s own /32
  4. It is dropped immediately because OSPF stopped

Explanation

Correct Answer

A:

Once the /24 route disappears, the installed /0 is the remaining matching route for this destination.

Incorrect Answers

B:

A withdrawn route is not present in the active forwarding table.

C:

No local /32 or interface address is stated for the server.

D:

The active default route still supplies a route for unmatched destinations.

Question 507

A branch has no installed route for 198.51.100.77 and does not have a default route. Its only connected subnet is 10.20.10.0/24. How does normal IPv4 forwarding handle the packet?

  1. Forward toward the numerically lowest configured interface
  2. Generate an automatic 0.0.0.0/0 next hop
  3. Flood the IPv4 packet out every active interface
  4. Discard the packet for lack of a matching route

Explanation

Correct Answer

D:

With no destination match and no default, the router has no forwarding next hop.

Incorrect Answers

A:

Interface names and IP order do not create a route.

B:

IOS does not create a usable default route solely because a destination is unknown.

C:

IP routers do not flood unknown unicast IPv4 destinations like Ethernet broadcasts.

Question 508

Two OSPFv2 candidates for identical 10.30.80.0/24 have the same AD 110 and working next hops. Path A cost is 15, Path B cost 40. Which route is selected by the OSPF metric?

  1. Path B, because its metric value is larger
  2. Path A, because OSPF cost 15 is lower
  3. Whichever route has the larger next-hop IPv4 address
  4. The default route regardless of specific OSPF candidates

Explanation

Correct Answer

B:

When comparing two same-prefix OSPF candidates, lower accumulated OSPF cost is preferred.

Incorrect Answers

A:

Higher OSPF cost represents a less preferred path.

C:

Numeric next-hop value is not used as a standard OSPF cost preference.

D:

An installed /24 is a longer match than an IPv4 default /0.

Question 509

The router has S 172.19.0.0/16 [1/0] via 192.0.2.8 and O 172.19.88.0/24 [110/16] via 192.0.2.9. Both routes are installed and work. Which path handles destination 172.19.88.55?

  1. The static /16 because AD 1 is lower
  2. Both equally, because the destination lies in the /16
  3. The OSPF /24 through 192.0.2.9
  4. The default route, because OSPF cost 16 is not zero

Explanation

Correct Answer

C:

The more-specific /24 wins longest-prefix selection; AD is not compared across different prefix lengths.

Incorrect Answers

A:

AD preference cannot override a more-specific installed /24 match.

B:

Route overlap does not imply load sharing; the longest prefix chooses the /24.

D:

A default /0 is less specific than both matching routes.

Question 510

A router has local interface address 10.8.1.1/24, producing L 10.8.1.1/32 and C 10.8.1.0/24. An echo request arrives addressed to 10.8.1.1. What forwarding treatment should take priority?

  1. Forward it out the same LAN via the connected /24
  2. Match the local /32 and process the traffic on the router itself
  3. Forward it to the default next hop
  4. Discard it solely because it matches two installed prefixes

Explanation

Correct Answer

B:

A local L /32 is the most-specific match and represents the router’s own interface address.

Incorrect Answers

A:

The packet is addressed to the router, so the local /32 wins over its covering C /24.

C:

A default /0 is much less specific than the local host route.

D:

Overlapping local and connected prefixes are normal; longest-prefix selection resolves them.