McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 52

Question 510

A router has local interface address 10.8.1.1/24, producing L 10.8.1.1/32 and C 10.8.1.0/24. An echo request arrives addressed to 10.8.1.1. What forwarding treatment should take priority?

  1. Forward it out the same LAN via the connected /24
  2. Match the local /32 and process the traffic on the router itself
  3. Forward it to the default next hop
  4. Discard it solely because it matches two installed prefixes

Explanation

Correct Answer

B:

A local L /32 is the most-specific match and represents the router’s own interface address.

Incorrect Answers

A:

The packet is addressed to the router, so the local /32 wins over its covering C /24.

C:

A default /0 is much less specific than the local host route.

D:

Overlapping local and connected prefixes are normal; longest-prefix selection resolves them.

Question 511

A configured static route 10.8.90.0/24 via 192.0.2.10 cannot be installed because the next hop is unresolved. An installed default S* 0.0.0.0/0 via 203.0.113.1 exists. Where does traffic to 10.8.90.7 go?

  1. Toward 192.0.2.10 via the uninstalled static route
  2. To every router on the outgoing Ethernet
  3. To the OSPF designated router by default
  4. To the default next hop 203.0.113.1

Explanation

Correct Answer

D:

The configured but uninstalled /24 does not participate in forwarding; the active /0 is the only match.

Incorrect Answers

A:

Next-hop resolution is required before that /24 can become a forwarding entry.

B:

Routers do not broadcast unknown IPv4 unicast packets to guess a path.

C:

OSPF DR is for multiaccess adjacency, not a universal forwarding fallback.

Question 512

Two equal-cost OSPFv2 paths to 10.70.0.0/24 have AD 110 and cost 30 through separate reachable neighbors; equal-cost multipath is enabled. Which forwarding behavior can the RIB support?

  1. Automatically reject both routes as ambiguous
  2. Select only the path with larger neighbor router ID
  3. Prefer a default route with a lower metric than 30
  4. Install both equal-cost next hops for load sharing

Explanation

Correct Answer

D:

Equal prefix, protocol preference and metric can qualify both OSPF paths for ECMP when multipath is supported and enabled.

Incorrect Answers

A:

Equal OSPF costs can be supported rather than treated as an error.

B:

Router-ID numeric order does not replace normal ECMP eligibility rules.

C:

A less-specific /0 does not override installed /24 paths based on cost.

Question 513

The RIB has S 172.20.4.64/27 via 192.0.2.9 and O 172.20.4.0/24 via 192.0.2.10. The destination is 172.20.4.130, outside the /27. What happens?

  1. Use the OSPF /24 via 192.0.2.10
  2. Use the static /27 solely because static AD is lower
  3. Discard because any /27 in the table excludes the destination
  4. Send to 192.0.2.9 because a longer mask always wins even when it does not match

Explanation

Correct Answer

A:

172.20.4.130 lies outside .64–.95/27 but within the whole 172.20.4.0/24.

Incorrect Answers

B:

A nonmatching /27 cannot be selected by administrative distance.

C:

The broader installed /24 still contains the target.

D:

Longest-prefix matching first requires the destination to fall inside the candidate network.

Question 514

SW2 at a warehouse distribution floor must send IPv4 subnet 172.20.19.0/24 toward adjacent router 192.0.2.2. Which IOS command installs exactly this static network route?

  1. ip route 172.20.19.0 255.255.0.0 192.0.2.2
  2. ipv6 route 172.20.19.0/24 192.0.2.2
  3. ip route 172.20.19.0 255.255.255.0 0.0.0.0
  4. ip route 172.20.19.0 255.255.255.0 192.0.2.2

Explanation

Correct Answer

D:

IPv4 static routes use ip route destination-network subnet-mask next-hop, with a reachable next-hop IPv4 address.

Incorrect Answers

A:

A /16 mask would create a broader route than the requested /24 prefix.

B:

The IPv6 routing command cannot install an IPv4 destination prefix.

C:

0.0.0.0 is not a usable remote IPv4 next-hop router address for this path.

Question 515

A branch at an enterprise data center has no specific route to most Internet prefixes and uses IPv4 ISP next hop 192.0.2.9. Which static IOS command configures its IPv4 gateway of last resort?

  1. ipv6 route ::/0 2001:db8:d::2
  2. ip route 0.0.0.0 0.0.0.0 192.0.2.9
  3. ip route 172.20.24.0 255.255.255.0 192.0.2.9
  4. ip route 255.255.255.255 255.255.255.255 192.0.2.9

Explanation

Correct Answer

B:

The IPv4 default route is destination 0.0.0.0 with a mask of 0.0.0.0, pointing to an adjacent next hop.

Incorrect Answers

A:

An IPv6 default route does not install an IPv4 gateway of last resort.

C:

A /24 static route forwards only that subnet, not every otherwise-unmatched IPv4 destination.

D:

This is an IPv4 host route for the all-ones address, not an IPv4 default.

Question 516

At a disaster-recovery location, ACCESS2 must forward only IPv4 destination 10.29.26.36/32 to next hop 192.0.2.16 without changing the rest of the local /24. Which static route is appropriate?

  1. ip route 10.29.26.36 255.255.255.255 192.0.2.16
  2. ip route 10.29.26.36 0.0.0.0 192.0.2.16
  3. ip route 10.29.26.36 255.255.255.0 192.0.2.16
  4. ip route 0.0.0.0 0.0.0.0 192.0.2.16

Explanation

Correct Answer

A:

An IPv4 /32 mask routes one destination host address only.

Incorrect Answers

B:

A zero subnet mask creates default-like matching, not a one-host /32 route.

C:

A /24 mask affects the entire subnet rather than this single host.

D:

A default route affects all destinations not otherwise matched.

Question 517

BR-RT uses a primary static route to 172.20.34.0/24 via 192.0.2.28 at AD 1. The backup next hop 198.51.100.16 must have administrative distance 200. Which command creates the intended floating backup?

  1. ip route 172.20.34.0 255.255.255.0 198.51.100.16 1
  2. ip route 172.20.34.0 255.255.255.0 198.51.100.16 200
  3. ip route 172.20.34.0 255.255.255.0 198.51.100.16 110
  4. ip route 172.20.34.0 255.255.255.0 198.51.100.16 0

Explanation

Correct Answer

B:

A floating static backup has a higher administrative distance than the primary static route (normally 1), so it is preferred only after the primary path is unavailable.

Incorrect Answers

A:

AD 1 is equal to the main static route and might share preference rather than remain floating.

C:

A distance of 110 is higher than 1 and could float, but the explicit operational design calls for backup AD 200; it does not meet the specified administrative policy.

D:

A distance of 0 would be more preferred rather than floating behind the main static path.

Question 518

IPv6 traffic from a municipal library should use next hop 2001:db8:16::2 when no more-specific IPv6 route exists. Which Cisco IOS command configures the IPv6 default route?

  1. ipv6 route 2001:db8:27::/64 2001:db8:16::2
  2. ip route 0.0.0.0 0.0.0.0 192.0.2.30
  3. ipv6 route ::1/128 2001:db8:16::2
  4. ipv6 route ::/0 2001:db8:16::2

Explanation

Correct Answer

D:

The IPv6 default route uses destination ::/0 and a reachable IPv6 next-hop, directing unmatched IPv6 traffic toward that router.

Incorrect Answers

A:

A /64 static network route does not match all IPv6 destinations.

B:

This is an IPv4 default, not an IPv6 route.

C:

::1/128 refers only to IPv6 loopback and is not a default prefix.

Question 519

CORE1 must reach IPv6 site prefix 2001:db8:2c::/48 through next-hop 2001:db8:19::2, without installing a default route. Which static configuration matches?

  1. ipv6 route 2001:db8:2c::/64 2001:db8:19::2
  2. ipv6 route 2001:db8:2c::/48 2001:db8:19::2
  3. ip route 2001:db8:2c:: 255.255.0.0 192.0.2.37
  4. ipv6 route ::/0 2001:db8:19::2

Explanation

Correct Answer

B:

An IPv6 static network route uses ipv6 route prefix/length next-hop with the required exact /48 destination.

Incorrect Answers

A:

This /64 is more specific than the required /48 allocation and would not match the whole site.

C:

IPv4 ip route syntax and dotted masks cannot configure an IPv6 destination.

D:

::/0 sends all unmatched IPv6 destinations to the next hop, not only the specified /48.

Question 520

A maintenance server at 2001:db8:31::77 needs a one-address static IPv6 path through 2001:db8:1c::2. Which exact IOS route should be installed?

  1. ipv6 route 2001:db8:31::77/64 2001:db8:1c::2
  2. ipv6 route ::/0 2001:db8:1c::2
  3. ip route 2001:db8:31::77 255.255.255.255 192.0.2.44
  4. ipv6 route 2001:db8:31::77/128 2001:db8:1c::2

Explanation

Correct Answer

D:

A /128 IPv6 static route selects exactly one IPv6 address.

Incorrect Answers

A:

A /64 IPv6 route can match many addresses rather than a single host.

B:

An IPv6 /0 default route has far broader scope.

C:

IPv4 ip route commands do not accept IPv6 destination addresses.