McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 41

Question 400

AP coverage and authentication are healthy; a new WLAN-specific policy denies DNS to guests despite successful DHCP. What controller setting most directly explains the problem?

  1. Verify that the WLAN is broadcast on the intended AP radios
  2. Select a suitable WLAN QoS profile for voice/video clients
  3. Check applicable WLAN client ACLs or policy profiles
  4. Create and enable the correct WLAN SSID on the controller

Explanation

Correct Answer

C:

Wireless ACL/policy rules can block DNS or application access after IP assignment.

Incorrect Answers

A:

A WLAN can be administratively enabled but not present on the intended RF band/AP group.

B:

A suitable QoS profile can classify and prioritize latency-sensitive wireless traffic.

D:

The WLAN SSID/profile must exist and be active for clients to discover/connect to the intended service.

Question 401

R-1 at a warehouse distribution floor shows O 172.16.0.0/24 [110/20] via 10.254.12.1 in show ip route. What does the O route code indicate?

  1. O identifies a route learned by OSPF
  2. S identifies a route learned by OSPF
  3. C identifies a route learned by OSPF
  4. L identifies a route learned by OSPF

Explanation

Correct Answer

A:

In Cisco IPv4 routing output, O is the OSPF route code.

Incorrect Answers

B:

S is the static-route code, not OSPF.

C:

C identifies a directly connected network route.

D:

L identifies a local interface host route.

Question 402

R-2 displays S 172.17.1.0/24 [1/0] via 10.254.19.1 in the IPv4 route table. What is the origin of this prefix?

  1. S identifies a directly connected Ethernet subnet
  2. S identifies a local interface /32 route
  3. S identifies an OSPF external route
  4. S identifies a manually configured static route

Explanation

Correct Answer

D:

A Cisco IOS route with code S is a static entry introduced by configuration.

Incorrect Answers

A:

Connected routes use the C code. Connected interface subnets appear with C when the local routed interface is operational; an S entry is a manually defined static route.

B:

Local interface routes use L. An L entry identifies the router’s own assigned interface address as an exact host route; a static entry instead has code S.

C:

OSPF routes are labeled with O-based codes.

Question 403

On R-3, show ip route lists C 172.18.2.0/24 is directly connected, GigabitEthernet0/1. What does the C code tell the engineer?

  1. C means the route was advertised only by BGP
  2. C identifies a subnet directly attached to an up/up routed interface
  3. C means the route is a loopback-only local /32 host entry
  4. C means the route is statically pointed to a remote next hop

Explanation

Correct Answer

B:

C indicates directly connected network reachability associated with a local interface.

Incorrect Answers

A:

BGP routes use B code on IOS.

C:

Local interface host routes commonly use L.

D:

Static routes use S. A route with prefix origin C is installed automatically from an active attached subnet, whereas IOS marks manually configured routes S.

Question 404

After assigning interface address 192.168.3.1/24, R-4 reports an L 192.168.3.1/32 entry. What does this L entry represent?

  1. L identifies a dynamically summarized OSPF route
  2. L identifies the router interface local host route
  3. L identifies routes from LLDP
  4. L identifies every learned default route

Explanation

Correct Answer

B:

L shows a local host route used for the router own interface address, normally /32 in IPv4.

Incorrect Answers

A:

An OSPF summary route is not represented by the local-host code L.

C:

LLDP is Layer 2 neighbor discovery and does not produce an IP L route.

D:

The default route is shown with a candidate-default marker and a prefix such as 0.0.0.0/0.

Question 405

The routing table of R-5 contains O 172.20.4.0/24 [110/20] via 10.254.40.1. How should [110/20] be interpreted?

  1. 20 is the administrative distance and 110 is the metric
  2. 110 is the administrative distance; 20 is the route metric
  3. 110 is the next-hop port and 20 is the VLAN number
  4. Both numbers are IPv4 prefix lengths

Explanation

Correct Answer

B:

IOS bracket notation [AD/metric] for OSPF routes uses 110 as distance and 20 as the OSPF metric.

Incorrect Answers

A:

The order in Cisco bracket route information is administrative distance first, then metric.

C:

These values are routing preference attributes and not L4 ports or VLAN identifiers.

D:

Prefix lengths are part of the /prefix notation, not [AD/metric].

Question 406

On R-6, a manual S 172.21.5.0/24 [1/0] route points toward 10.254.47.1. What does the [1/0] pair show?

  1. 1 is the route administrative distance and 0 is its metric
  2. 1 is a prefix length and 0 is a wildcard mask
  3. 0 is the static route administrative distance
  4. 1 and 0 are the two last octets of the next-hop address

Explanation

Correct Answer

A:

The standard static route entry [1/0] shows default AD 1 and static-route metric 0.

Incorrect Answers

B:

IPv4 prefix lengths and wildcard masks do not appear as an [AD/metric] pair.

C:

The administrative distance is the first value, not the second.

D:

The next hop is separately displayed after via.

Question 407

R-7 shows O 172.22.6.0/24 [110/20] via 10.254.54.1, GigabitEthernet0/2. Which item is the next-hop IP for forwarding to that subnet?

  1. The local exit interface is the route code O
  2. The destination network address is 172.22.6.0
  3. The bracketed metric is the next hop 20
  4. The next-hop router address is 10.254.54.1

Explanation

Correct Answer

D:

The value after via identifies the IP next hop to which the current router forwards packets for 172.22.6.0/24: 10.254.54.1.

Incorrect Answers

A:

A route code identifies the origin of a route rather than the next hop.

B:

A destination prefix describes matching traffic, not the next-hop adjacency.

C:

The route metric is not an IPv4 next-hop address.

Question 408

A routing table on R-8 includes S 172.23.7.0/24 via 10.254.61.1. Which component of this route is the destination prefix that incoming packets are compared against?

  1. The destination prefix 172.23.7.0/24
  2. The default route 0.0.0.0/0
  3. A /32 local interface host route
  4. The next-hop neighbor address 10.254.61.1

Explanation

Correct Answer

A:

The network portion 172.23.7.0/24 defines which destination addresses are eligible to match this routing entry.

Incorrect Answers

B:

A /0 route is the catch-all fallback, not this explicit destination subnet.

C:

A /32 local route matches one interface address rather than this /24 subnet.

D:

The next hop is where matching packets go, not the range of destinations matched by the prefix.

Question 409

R-9 at a training network has gateway of last resort set to 10.254.68.1 and no learned route for an external service. What role does that gateway serve?

  1. The gateway of last resort always overrides a more-specific prefix
  2. The gateway of last resort identifies the next hop for only directly connected hosts
  3. The gateway of last resort is another name for a DNS server
  4. The gateway of last resort provides a route for otherwise unmatched destinations

Explanation

Correct Answer

D:

A default route can be selected when no more specific route matches the destination.

Incorrect Answers

A:

Longest-prefix matching gives more specific routes preference over a default.

B:

Directly connected routes are not exclusively controlled by the default route.

C:

Routing gateways forward IP packets; DNS resolvers translate names.

Question 410

R-10 learns the same /24 prefix 172.25.9.0/24 through two equal-AD OSPF paths with costs 15 and 45. Which route-selection property decides the preferred OSPF path?

  1. The next hop with the highest IP address always wins
  2. An OSPF route with lower metric is preferred over another OSPF route to the same prefix if AD is equal
  3. An unrelated default route overrides both OSPF routes
  4. An OSPF route with larger metric always wins

Explanation

Correct Answer

B:

With identical prefix and route source/distance, the routing protocol metric determines its preferred path; lower OSPF cost wins.

Incorrect Answers

A:

Numerical next-hop IPv4 value is not the OSPF path selection criterion.

C:

The explicit destination prefix is longer and preferred over a default route.

D:

Lower route cost is preferred within OSPF, not higher.