McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 24

Question 230

An administrator discovers `show vlan brief` lists VLAN 37 but no port. The new kiosk is connected to Gi1/0/23, currently assigned to access VLAN 1, and must join VLAN 37 without changing trunk links. What direct port action is needed?

  1. Delete VLAN 37 and let the port recreate it implicitly
  2. Set interface Gi1/0/23 switchport access vlan 37
  3. Set the trunk native VLAN to 37 across every uplink
  4. Configure an IPv4 route to subnet 10.37.0.0/24

Explanation

Correct Answer

B:

The VLAN exists but the specific kiosk access port remains in VLAN 1 until reassigned.

Incorrect Answers

A:

Removing the required VLAN does not assign the kiosk to it and risks taking other members offline.

C:

A kiosk access-port assignment does not require changing native VLANs on the network.

D:

Routing rules cannot move an Ethernet switchport from VLAN 1 into VLAN 37.

Question 231

The distribution switch has an SVI for VLAN 46, but access switches carry that VLAN only over a trunk restricted to `allowed vlan 10,20`. Local hosts can talk to each other, yet cannot reach the remote gateway. What specific transport condition is missing?

  1. Set the user access ports to VLAN 20
  2. Permit VLAN 46 on the path’s 802.1Q trunk while keeping its VLAN active
  3. Configure a second DHCP pool for VLAN 46
  4. Disable spanning tree on every uplink

Explanation

Correct Answer

B:

Frames in VLAN 46 need an allowed VLAN path between access hosts and the distribution gateway.

Incorrect Answers

A:

That sends users to a different broadcast domain instead of transporting VLAN 46.

C:

New leases do not create the missing Layer 2 transport toward the remote SVI.

D:

Disabling loop prevention is unsafe and not the solution to an explicitly pruned VLAN.

Question 232

Router-on-a-stick uses Gi0/0.80 for VLAN 80 and Gi0/0.90 for VLAN 90. The link is a trunk, but Gi0/0.90 is configured `encapsulation dot1Q 80`. What should change?

  1. Set `ip default-gateway` on the router subinterface
  2. Change the subinterface tag to `encapsulation dot1Q 90`
  3. Remove the VLAN 90 IP gateway address
  4. Change the native VLAN of every other campus trunk to 80

Explanation

Correct Answer

B:

A router subinterface receiving VLAN 90 frames must use the matching 802.1Q VLAN identifier.

Incorrect Answers

A:

The router should route VLAN traffic; switch management default-gateway syntax does not fix tagging.

C:

That would disable the intended gateway instead of fixing its 802.1Q framing.

D:

An unrelated campus-wide native VLAN change would not correct the subinterface VLAN 90 tag.

Question 233

A workstation’s access port is configured for VLAN 212. The VLAN was removed from the VLAN database, and `show vlan brief` no longer lists it. Which change restores the intended local broadcast domain?

  1. Set the DNS suffix to VLAN212
  2. Disable STP globally on all ports
  3. Recreate VLAN 212 and verify the access-port assignment and trunk path
  4. Change only the source IP subnet mask on every host

Explanation

Correct Answer

C:

A local VLAN must exist and be active for its assigned ports to forward traffic in that VLAN.

Incorrect Answers

A:

DNS configuration does not create a missing Layer 2 VLAN.

B:

Disabling spanning tree is unsafe and cannot create the removed VLAN.

D:

An IP mask does not reinstate a removed VLAN in the switch database.

Question 234

SVIs for VLAN 10 and VLAN 20 are both up with valid /24 interface IP addresses on a multilayer switch. Hosts can ping their own gateways but not each other. Which global setting enables IP forwarding between these SVIs?

  1. `ip routing`
  2. `ip default-gateway 192.0.2.1`
  3. `no ip redirects`
  4. `switchport trunk native vlan 1`

Explanation

Correct Answer

A:

Global ip routing enables L3 forwarding between connected SVI networks on a capable multilayer switch.

Incorrect Answers

B:

ip default-gateway is for management on a nonrouting switch and does not turn on inter-VLAN routing.

C:

Disabling ICMP redirects does not enable IPv4 forwarding.

D:

A trunk native VLAN affects untagged Layer 2 frames, not SVI routing.

Question 235

A Layer 2 switch has management interface Vlan8 at 192.168.8.10/24. A monitoring station on another routed subnet cannot access it even though management works locally. The switch is not a Layer 3 router. What must be configured?

  1. ip routing and a new dynamic OSPF process
  2. switchport mode trunk on the management SVI
  3. ip default-gateway 192.168.8.1 pointing at the management subnet router
  4. An interface Vlan8 address in the monitoring station’s remote subnet

Explanation

Correct Answer

C:

A non-routing Layer 2 switch uses an IPv4 management default gateway to reply to off-subnet management hosts.

Incorrect Answers

A:

Turning a management-only Layer 2 switch into a router is unnecessary and may not be supported.

B:

An SVI is logical and cannot be configured as an Ethernet trunk.

D:

That would break its local management subnet instead of supplying a routed next hop.

Question 236

A workstation on Gi1/0/13 was moved physically to another switch. Both switches have VLAN 77, but the replacement port shows access VLAN 88. Which correction restores the intended L2 broadcast domain?

  1. `ip routing` on the workstation NIC
  2. `switchport access vlan 77` on the replacement access interface
  3. `no spanning-tree vlan 77` globally
  4. `switchport trunk allowed vlan 88` on an unrelated trunk

Explanation

Correct Answer

B:

An access interface assigns untagged workstation ingress frames to its configured access VLAN; the port must use VLAN 77.

Incorrect Answers

A:

IP routing is not an endpoint NIC switchport assignment command.

C:

Disabling STP cannot assign this port to the intended VLAN and creates loop risk.

D:

Changing an unrelated trunk VLAN allowance does not correct this local access port membership.

Question 237

Gi1/0/13 is already an enabled access port configured for VLAN 102, but `show vlan brief` does not list VLAN 102 and the workstation cannot communicate. The campus uses normal-range VLANs and no VTP provisioning. Which action restores the missing data VLAN?

  1. Set the interface to trunk mode so untagged hosts can use VLAN 102
  2. Configure `ip routing` globally instead of defining a VLAN
  3. Create VLAN 102 in the switch VLAN database and keep the port assigned to it
  4. Change the access port to VLAN 1 without creating VLAN 102

Explanation

Correct Answer

C:

The access port can forward for VLAN 102 once that VLAN exists and is active on the switch.

Incorrect Answers

A:

A trunk transports tagged VLANs between compatible peers but does not create the absent VLAN for this ordinary host port.

B:

Layer-3 routing cannot restore an absent Layer-2 VLAN in the local switching database.

D:

Moving to VLAN 1 would abandon the required VLAN 102 segmentation rather than enabling it.

Question 238

SVIs for VLAN 14 and VLAN 24 are up/up with valid gateway addresses, but hosts in the two VLANs cannot route through the multilayer switch; `show running-config` lacks `ip routing`. Which fix is needed?

  1. Configure SPAN mirroring on the core uplink
  2. Add a voice VLAN to every switchport
  3. Enable `ip routing` on the multilayer switch
  4. Enable DHCP snooping on both VLANs

Explanation

Correct Answer

C:

Without Layer 3 forwarding enabled, configured SVIs may provide management but not inter-VLAN routing.

Incorrect Answers

A:

Traffic mirroring changes observation, not routing capability.

B:

Voice VLAN configuration does not enable routing between the user VLANs.

D:

Snooping inspects DHCP messages and cannot substitute for Layer 3 forwarding.

Question 239

A wired IP phone reports it can send calls, but the desktop bridged through the phone has no data connectivity. The switchport correctly uses `switchport voice vlan 220` yet its access VLAN is set to 220 instead of the requested PC VLAN 25. Which fix is appropriate?

  1. Remove switchport voice vlan 220 and keep access VLAN 220
  2. Keep voice VLAN 220 and set switchport access vlan 25
  3. Convert the phone port to a router-on-a-stick subinterface
  4. Configure a floating static route for VLAN 25

Explanation

Correct Answer

B:

The phone tags voice VLAN 220 while the downstream desktop uses untagged data VLAN 25.

Incorrect Answers

A:

This removes the phone’s required tagged voice VLAN and still misplaces desktop frames.

C:

An endpoint switchport does not need routed dot1Q subinterfaces to support an IP phone.

D:

A backup route cannot correct the port’s data VLAN membership.

Question 240

A switch’s access port Gi0/15 is in VLAN 80 and a host has address 10.80.4.44/24. The gateway SVI for VLAN 80 was configured 10.80.4.255/24. What must the administrator change?

  1. Set the host IP to the directed broadcast 10.80.4.255
  2. Set VLAN 80 to the switch’s native VLAN
  3. Configure an OSPF router ID matching 10.80.4.255
  4. Select a usable unicast gateway address such as 10.80.4.1/24 for Vlan80

Explanation

Correct Answer

D:

The .255 address is the directed broadcast of the /24 and cannot serve as an ordinary gateway interface address.

Incorrect Answers

A:

A broadcast destination cannot be assigned as a conventional unicast host identity.

B:

Native tagging is unrelated to the invalid IPv4 SVI address.

C:

An OSPF router ID does not make a broadcast address usable for an SVI.