McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 22

Question 210

An access switch carries VLAN 62 to a lab printer. The old port Gi1/0/12 is configured as a trunk; the printer sends only untagged frames and must not see any other VLAN. Which change most directly enforces the design?

  1. Set Gi1/0/12 to switchport mode access and switchport access vlan 62
  2. Keep trunk mode and permit VLANs 1-4094
  3. Configure switchport voice vlan 62 alone
  4. Configure the switch management SVI with VLAN 62

Explanation

Correct Answer

A:

An access interface places untagged printer frames into only VLAN 62 and is not negotiating a trunk.

Incorrect Answers

B:

A trunk potentially transports many VLANs and does not restrict this endpoint to one access VLAN.

C:

The auxiliary voice VLAN is intended for phone tagging and does not assign the untagged printer data VLAN.

D:

An SVI address does not replace the physical port’s Layer 2 VLAN membership.

Question 211

An access switch has only Layer 2 switching enabled and a management SVI at 192.168.170.5/24. A monitoring server is outside that subnet. Which switch-level setting provides the return path?

  1. Set `switchport trunk allowed vlan none` on uplinks
  2. Configure OSPF on every Layer 2 user-facing access port
  3. Add the monitoring host to an unrelated voice VLAN
  4. Configure `ip default-gateway` with the reachable management VLAN router address

Explanation

Correct Answer

D:

A Layer 2-only switch uses the configured default gateway for management traffic leaving its subnet.

Incorrect Answers

A:

Removing allowed VLANs would likely disrupt the management VLAN path.

B:

The L2 switch does not need OSPF to forward its local management traffic.

C:

Voice VLAN membership does not provide management packet routing.

Question 212

A VoIP phone tags its media in VLAN 120 and passes a desktop’s untagged traffic to the same switchport in VLAN 20. The phone loses call connectivity after the switchport voice setting is cleared, but the desktop still works. What should be restored?

  1. switchport access vlan 120 instead of VLAN 20
  2. switchport mode trunk with all VLANs allowed
  3. switchport voice vlan 120 under the existing data access port
  4. ip routing under global configuration

Explanation

Correct Answer

C:

The auxiliary voice VLAN lets the phone tag voice separately while the attached PC remains in untagged data VLAN 20.

Incorrect Answers

A:

This moves the desktop’s untagged traffic into the voice segment and leaves the intended data VLAN wrong.

B:

A phone-facing access-plus-voice design does not require exposing an unrestricted trunk to the desktop.

D:

Layer 3 forwarding has no role in the missing auxiliary voice VLAN membership on this switchport.

Question 213

Router EDGE1 has an enabled GigabitEthernet0/0.84 subinterface with `encapsulation dot1Q 84` and gateway 172.18.84.1/24. The connected switch port to EDGE1 is mistakenly in access mode for VLAN 84. Other router subinterfaces need tagged VLANs too. What switch-side change is required?

  1. Keep `switchport mode access` and assign every VLAN to this same single access VLAN
  2. Disable the switch uplink and rely on router subinterfaces to forward VLANs
  3. Configure the switch uplink as a routed port with a single 172.18.84.0/24 network
  4. Configure an 802.1Q trunk on the switch uplink and allow VLAN 84 and the other required tagged VLANs

Explanation

Correct Answer

D:

An 802.1Q trunk carries the matching tags to the appropriate router subinterfaces; VLAN 84 must be in the permitted set.

Incorrect Answers

A:

An access port carries one ordinary data VLAN and does not transport the multiple tagged VLANs the router subinterfaces expect.

B:

An administratively disabled uplink prevents all traffic to the router and is not a VLAN tagging repair.

C:

A routed switch port does not act as a VLAN trunk to the existing router-on-a-stick subinterfaces.

Question 214

A technician assigns `switchport access vlan 66` to Gi1/0/8, but the network change requires VLAN 66 to exist across several managed switches. What additional configuration must be verified?

  1. Change every PC subnet to 0.0.0.0/0
  2. Disable VLAN 66 on all trunk ports
  3. Configure only a static IPv6 host route on the access switch
  4. Create or propagate VLAN 66 in the appropriate VLAN database on each switch that must carry it

Explanation

Correct Answer

D:

An access-port assignment alone is not sufficient if the VLAN is absent or inactive on transit switches.

Incorrect Answers

A:

A default prefix is not a valid replacement for the VLAN database.

B:

Excluding the intended VLAN prevents carriage across the path.

C:

A routed IPv6 host route does not create the Layer 2 broadcast domain.

Question 215

A virtualization host sends frames tagged for VLANs 150 and 151 over one physical NIC. Which switchport design permits both VLANs on the same link?

  1. Assign an access port to VLAN 150 only
  2. Configure port security sticky as the VLAN transport mechanism
  3. Enable LLDP but leave the port access mode
  4. Configure a trunk that permits VLANs 150 and 151 and matches the host tagging

Explanation

Correct Answer

D:

A trunk can carry multiple 802.1Q-tagged VLANs; a plain access port classifies ordinary untagged traffic into a single VLAN.

Incorrect Answers

A:

An access port cannot normally carry both independent tagged VLANs as intended.

B:

Sticky secure MAC learning does not create an 802.1Q trunk.

C:

Neighbor discovery does not change the forwarding VLAN mode.

Question 216

The `interface vlan 135` gateway is configured with 10.135.0.1/24, but its line protocol stays down. The VLAN exists and every attached access port is administratively shut down. Which operational change is most relevant?

  1. Set the SVI network mask to /32.
  2. Bring an appropriate VLAN 135 Layer 2 member or trunk carrying VLAN 135 into an operational forwarding state.
  3. Add a DNS record for the switch hostname.
  4. Disable VLAN 135 and move users to VLAN 1.

Explanation

Correct Answer

B:

On typical Cisco switches, SVI autostate requires the VLAN and an operational active Layer 2 presence; with all ports shut down it can stay down.

Incorrect Answers

A:

A /32 gateway mask does not make shutdown switchports active.

C:

DNS naming does not change SVI line-protocol state.

D:

Removing the VLAN defeats the requested gateway service.

Question 217

On a multilayer switch, VLAN 74 exists and SVI Vlan74 has the right gateway address. `show ip interface brief` says Vlan74 down/down. All ports assigned to VLAN 74 are administratively shut. What should be fixed before route testing?

  1. Change the SVI mask to /32
  2. Configure a static default route toward the ISP
  3. Add switchport mode trunk directly under interface Vlan74
  4. Enable an operational Layer 2 member or trunk carrying VLAN 74

Explanation

Correct Answer

D:

An SVI with normal autostate needs an active VLAN forwarding port before its line protocol can rise.

Incorrect Answers

A:

A host mask would not bring the dormant VLAN’s Layer 2 line protocol up.

B:

An external route cannot revive an SVI whose underlying VLAN has no active member.

C:

A switch virtual interface is a routed logical interface, not a physical trunk port.

Question 218

A wired phone passes a computer through its built-in switch. The phone should tag voice in VLAN 30 and leave PC traffic untagged in VLAN 10. Which port design accomplishes this?

  1. Configure switchport mode access, switchport access vlan 10, and switchport voice vlan 30.
  2. Disable VLAN 10 on the switch and force static IP addressing.
  3. Place both the phone and PC untagged in VLAN 30.
  4. Configure switchport mode trunk with native VLAN 30 and disallow VLAN 10.

Explanation

Correct Answer

A:

A voice VLAN on an access port allows voice tagged for VLAN 30 while data follows access VLAN 10.

Incorrect Answers

B:

Static addressing does not assign ingress frames to the desired VLANs.

C:

Putting both devices in voice VLAN 30 removes the intended data/voice segmentation.

D:

The trunk/native design does not implement the specified ordinary access/data and phone voice VLAN arrangement.

Question 219

A Cisco multilayer switch has both Vlan18 and Vlan28 interfaces up/up, with hosts using their respective SVI gateway IP addresses. Cross-VLAN traffic still fails, and the global running configuration contains `no ip routing`. Which corrective action is required?

  1. Change every access port to switchport mode trunk
  2. Assign both VLANs the same IPv4 subnet
  3. Enable global ip routing on the multilayer switch
  4. Disable the gateway SVIs and rely on the switch management address

Explanation

Correct Answer

C:

Without global IPv4 routing, active SVIs alone do not make this switch forward traffic between subnets.

Incorrect Answers

A:

End-host access ports need their own data VLAN, not trunks, and this does not enable L3 forwarding.

B:

Overlapping VLAN address spaces are not a substitute for routed inter-VLAN connectivity.

D:

Removing the L3 gateways would eliminate rather than repair the inter-VLAN path.

Question 220

The IP address on `interface Vlan15` was configured, but a routed ping between VLAN 15 and VLAN 25 fails. Which check most directly verifies whether SVI addressing and forwarding are operational?

  1. show ntp status as the only diagnostic
  2. show mac address-table only, ignoring IP interfaces
  3. show wireless client summary on an unrelated WLC
  4. show ip interface brief plus show ip route, checking the SVIs and connected prefixes

Explanation

Correct Answer

D:

This confirms interface protocol state and the presence of connected routes needed for routing.

Incorrect Answers

A:

Time synchronization does not determine whether the connected VLAN routes exist.

B:

MAC learning does not establish whether the routed SVIs are up with correct Layer 3 prefixes.

C:

Wireless client data does not diagnose local switch SVI routing.