McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 63

Question 620

During an R82 management HA installation review, both peers have different internal IP addresses, and a technician calls the higher-address peer the primary. The deployment record shows which management server was installed first. The controls that address the separate requirement to make configuration changes while the management pair remains healthy are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use the Active Management Server for write operations
  2. Initiate changeover so a healthy standby becomes Active
  3. Treat the first installed management server as the primary
  4. Leave the newly defined secondary Management Server in Standby

Explanation

Correct Answer

C:

Installation sequence defines primary versus secondary roles. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Only the Active server accepts normal management changes, but the current evidence calls for a different R82 operation.

B:

A controlled management changeover restores an Active management server; this does not resolve the observed condition.

D:

Secondary management servers start in Standby by default, yet that applies to assign the default role to newly installed secondary management rather than the observed issue.

Question 621

A SaaS provider publishes rapidly changing network ranges and Check Point maintains its current addresses in a cloud feed. A policy written with last quarter’s manually entered host IPs frequently drops legitimate connections. The controls that address the separate requirement to confirm an external address feed was refreshed successfully are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use an Updatable Object based on the service address feed
  2. Let the Updatable Object update on the Security Gateway
  3. Search Logs & Events for the named object and status Succeeded
  4. Import the Updatable Object into a Destination column

Explanation

Correct Answer

A:

Updatable Objects follow changing externally published addresses. This directly addresses the documented incident evidence.

Incorrect Answers

B:

An Updatable Object membership refresh does not require policy reinstall; this does not resolve the observed condition.

C:

Successful update logs provide feed-specific operational evidence, but the current evidence calls for a different R82 operation.

D:

Access Control can match an Updatable Object as a destination, yet that applies to control cloud-service destinations in the Access Control policy rather than the observed issue.

Question 622

A headquarters R82 gateway must be the central encrypted transit point for three branches. The branches should not build arbitrary direct site-to-site tunnels, and all protected subnets use headquarters as a hub. The operator must distinguish this from a separate requirement to protect traffic between two managed security gateways. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Verify VPN domain definitions and encryption-domain selectors
  2. Use a Mesh VPN community for peer relationships
  3. Use a Star VPN community with the hub as center
  4. Configure both gateways in the appropriate Site-to-Site VPN community

Explanation

Correct Answer

C:

A Star community models branch-to-center connectivity. This directly addresses the documented incident evidence.

Incorrect Answers

A:

VPN domains govern which networks are expected through the tunnel; this does not resolve the observed condition.

B:

A Mesh model supports direct relationships among participating members, yet that applies to connect every gateway in a small trusted group directly to peers rather than the observed issue.

D:

Site-to-Site communities define gateway membership and tunnel policy, but the current evidence calls for a different R82 operation.

Question 623

A new R82 user-defined SmartEvent correlation and reaction was saved in the management editor, but an intentionally generated matching test event is still evaluated under the previous rules. The team confirmed the new definition is not installed. A preliminary suggestion is to define a User-Defined Event and its filters. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Assign appropriate SmartEvent event severity
  2. Save and install the updated SmartEvent Event Policy
  3. Define a User-Defined Event and its filters
  4. Assign an Automatic Reaction to its event definition

Explanation

Correct Answer

B:

Event policy installation publishes event-definition changes. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Event definitions include configurable severity where supported; this does not resolve the observed condition.

C:

User-defined event filters identify relevant log combinations, but the current evidence calls for a different R82 operation.

D:

Automatic Reactions connect event detection to responses, yet that applies to set an incident response when a specified event occurs rather than the observed issue.

Question 624

The central operations team wants to schedule supported software maintenance for a cluster through SmartConsole and track it in Tasks. A new Access Control policy is not the deliverable. A proposed change would be to deploy packages to the explicitly selected target objects, which addresses the different requirement to minimize unintended components in a maintenance rollout. Which action instead addresses the observed incident?

  1. Use the Version Upgrade action on the selected gateway
  2. Use SmartConsole Central Deployment where supported
  3. Deploy packages to the explicitly selected target objects
  4. Use the Gateway & Servers deployment actions in SmartConsole

Explanation

Correct Answer

D:

SmartConsole exposes centrally managed software deployment actions. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The Version Upgrade action deploys supported gateway software, yet that applies to apply an upgrade to a gateway instead of changing policies rather than the observed issue.

B:

Central Deployment is the documented gateway best practice; this does not resolve the observed condition.

C:

Central Deployment scopes actions to selected targets, but the current evidence calls for a different R82 operation.

Question 625

An R82 ElasticXL cluster has one existing site with healthy SMO and two members. A newly discovered appliance is intended solely to add capacity to this same site, not create geographical redundancy. A preliminary suggestion is to remove it then add as a pending member to the target site. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Add the pending appliance to the existing Site
  2. Create a new Site while admitting the pending appliance
  3. Expect the SMO to accept and distribute traffic to members
  4. Remove it then add as a pending member to the target site

Explanation

Correct Answer

A:

Adding to the existing site enables supported load sharing. This directly addresses the documented incident evidence.

Incorrect Answers

B:

A new site is used to establish High Availability sites, yet that applies to add a second ElasticXL Site for availability rather than the observed issue.

C:

The SMO handles distribution to other site members; this does not resolve the observed condition.

D:

The documented workflow removes and re-adds a node to the chosen site, but the current evidence calls for a different R82 operation.

Question 626

A standby R82 Management Server is synchronized and reachable, but SmartConsole opened against that standby lets an auditor view objects without modifying them. An administrator must publish a new outbound access rule without causing an HA role change. An alternate diagnosis concerns the requirement to correct a collision where both Management Servers report Active, for which a colleague suggests use Management HA actions to set one server to Standby. Based on the recorded symptoms, which corrective step should have priority?

  1. Open the Standby Management Server in read-only SmartConsole mode
  2. Initiate changeover so a healthy standby becomes Active
  3. Use the Active Management Server for write operations
  4. Use Management HA actions to set one server to Standby

Explanation

Correct Answer

C:

Only the Active server accepts normal management changes. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Standby permits inspection without competing configuration changes; this does not resolve the observed condition.

B:

A controlled management changeover restores an Active management server, yet that applies to recover administration when the active management node goes offline rather than the observed issue.

D:

One Active server is required for a consistent normal HA state, but the current evidence calls for a different R82 operation.

Question 627

An R82 firewall policy change includes two new Manual NAT rules and an updated associated Access Control rule. SmartConsole still shows the session unpublished; the gateway continues enforcing the previous installed policy. A proposed change would be to open Security Policies > Access Control > NAT, which addresses the different requirement to locate Manual NAT configuration in SmartConsole. Which action instead addresses the observed incident?

  1. Open Security Policies > Access Control > NAT
  2. Publish the session and install the relevant security policy
  3. Use the Translated Services column in a Manual NAT rule
  4. Create an appropriate one-direction Manual NAT policy rule

Explanation

Correct Answer

B:

Published and installed policy activates gateway enforcement changes. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The Access Control NAT policy contains manual translation rules, but the current evidence calls for a different R82 operation.

C:

Manual NAT can translate services as well as addresses, yet that applies to translate the destination service port for one published server rather than the observed issue.

D:

Manual NAT supports direction-specific static translation; this does not resolve the observed condition.

Question 628

A mesh VPN community has five managed Check Point gateways and operations wants every eligible inter-gateway tunnel monitored as permanent. A colleague configured permanence for only one named pair. The controls that address the separate requirement to track failure of a monitored permanent VPN tunnel are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Enable permanent-tunnel tracking or alert behavior
  2. Use periodic tunnel-test responses to determine up status
  3. Use interoperable IKE Dead Peer Detection for supported permanent-tunnel monitoring
  4. Apply the permanent-tunnel setting to the entire community

Explanation

Correct Answer

D:

Community-level settings can mark all eligible tunnels permanent. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Permanent tunnel monitoring can issue logs and alerts on failure, but the current evidence calls for a different R82 operation.

B:

Test packet responses are the basis for permanent tunnel status; this does not resolve the observed condition.

C:

R82 Dead Peer Detection supports third-party gateways, while proprietary tunnel-test packets require Check Point peers, yet that applies to monitor an interoperable third-party IPsec peer without proprietary Check Point tunnel-test packets rather than the observed issue.

Question 629

A new capacity requirement calls for another supported appliance in the existing R82 ElasticXL cluster. The Security Management Server should still see one logical gateway identity and existing policy. The operator must distinguish this from a separate requirement to manage an ElasticXL cluster as one logical gateway in SmartConsole. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Add supported members through ElasticXL admission and cloning
  2. Use insights or show cluster info provision live
  3. Create one Single Management Object for the entire cluster
  4. Review supported platform and cluster membership limits

Explanation

Correct Answer

A:

ElasticXL is designed to scale membership under one gateway object. This directly addresses the documented incident evidence.

Incorrect Answers

B:

ElasticXL provides member onboarding and clone status commands; this does not resolve the observed condition.

C:

ElasticXL exposes one logical Security Gateway management object, but the current evidence calls for a different R82 operation.

D:

ElasticXL has documented platform and membership constraints, yet that applies to check membership count and topology before scaling rather than the observed issue.

Question 630

A management-HA changeover is reported as complete after planned maintenance. Operators can reach both R82 servers and want to ensure that the promotion did not leave a collision. The controls that address the separate requirement to recover administration when the active management node goes offline are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Initiate changeover so a healthy standby becomes Active
  2. Select which node remains Active before resetting its peer
  3. Verify exactly one Active and remaining Standby status
  4. Review which database will be overwritten when setting Standby

Explanation

Correct Answer

C:

One Active peer is the expected result of controlled changeover. This directly addresses the documented incident evidence.

Incorrect Answers

A:

A controlled management changeover restores an Active management server, but the current evidence calls for a different R82 operation.

B:

Collision recovery should establish an authoritative Active node, yet that applies to resolve two active nodes safely during collision troubleshooting rather than the observed issue.

D:

Demoting a server to Standby overwrites its data from the Active peer; this does not resolve the observed condition.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests