McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 61

Question 600

A SmartConsole Central Deployment task remains blocked before package verification. The management server cannot reach the chosen gateway, although the package exists in its repository. The job is not a policy-install problem. An alternate diagnosis concerns the requirement to obtain an exact patch required by a change advisory, for which a colleague suggests search for the named Hotfix/Jumbo package in deployment UI. Based on the recorded symptoms, which corrective step should have priority?

  1. Search for the named Hotfix/Jumbo package in deployment UI
  2. Run the Central Deployment Tool from the Management Server
  3. Use SmartConsole Central Deployment where supported
  4. Check Management Server connectivity to selected gateways

Explanation

Correct Answer

D:

Remote deployment depends on control connectivity to targets. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The specific-package lookup matches the approved advisory, but the current evidence calls for a different R82 operation.

B:

CDT uses the Management Server to deploy to gateways, yet that applies to decide where CDT runs when upgrading remote gateways rather than the observed issue.

C:

Central Deployment is the documented gateway best practice; this does not resolve the observed condition.

Question 601

A cloned R82 ElasticXL member finishes image transfer but repeatedly transitions from Down to Up during admission. The team needs the messages describing cluster state changes, not the file-copy log. The operator must distinguish this from a separate requirement to investigate image-cloning progress problems. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Inspect /var/log/lightshot.log on the relevant member
  2. Inspect the $FWDIR/log/blade_config state messages
  3. Run show cluster info provision in Gaia gClish
  4. Create one Single Management Object for the entire cluster

Explanation

Correct Answer

B:

blade_config records important cluster up/down messages. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The lightshot log documents SMO snapshot and image cloning, but the current evidence calls for a different R82 operation.

C:

The provision command displays detected members and states, yet that applies to inspect discovery and provisioning state from CLI rather than the observed issue.

D:

ElasticXL exposes one logical Security Gateway management object; this does not resolve the observed condition.

Question 602

A design document proposes placing two R82 Management Servers in HA and then removing the Security Gateway ClusterXL pair because management is now redundant. Both gateways carry production traffic. The operator must distinguish this from a separate requirement to investigate whether an HA role change completed. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Retain synchronized objects, rules, and management settings
  2. Verify exactly one Active and remaining Standby status
  3. Plan management-server redundancy separately from gateway clustering
  4. Use the Active Management Server for write operations

Explanation

Correct Answer

C:

Management HA protects the management database and administration. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Management HA keeps management configuration aligned on peers, yet that applies to explain the value of management database synchronization rather than the observed issue.

B:

One Active peer is the expected result of controlled changeover, but the current evidence calls for a different R82 operation.

D:

Only the Active server accepts normal management changes; this does not resolve the observed condition.

Question 603

The SOC wants to allow inbound synchronization traffic only when its source belongs to the provider’s changing published cloud ranges. The destination is a fixed management subnet. An alternate diagnosis concerns the requirement to apply updated provider address membership without reinstallation, for which a colleague suggests let the Updatable Object update on the Security Gateway. Based on the recorded symptoms, which corrective step should have priority?

  1. Place an Updatable Object in the Access Control Source column
  2. Let the Updatable Object update on the Security Gateway
  3. Use an Updatable Object as source or destination of an HTTPS rule
  4. Use an Updatable Object based on the service address feed

Explanation

Correct Answer

A:

The Updatable Object is supported as an Access Control source. This directly addresses the documented incident evidence.

Incorrect Answers

B:

An Updatable Object membership refresh does not require policy reinstall, but the current evidence calls for a different R82 operation.

C:

HTTPS Inspection supports Updatable Objects in matching fields; this does not resolve the observed condition.

D:

Updatable Objects follow changing externally published addresses, yet that applies to match a cloud service whose published addresses change often rather than the observed issue.

Question 604

An R82 gateway maintains a permanent site-to-site tunnel to a third-party IPsec firewall. Traffic becomes idle and Check Point tunnel-test packets receive no useful response. The peer supports standards-based IKE keepalives. An alternate diagnosis concerns the requirement to verify a permanent VPN tunnel remains reachable, for which a colleague suggests use periodic tunnel-test responses to determine up status. Based on the recorded symptoms, which corrective step should have priority?

  1. Configure both gateways in the appropriate Site-to-Site VPN community
  2. Configure the appropriate Permanent Tunnel setting
  3. Use periodic tunnel-test responses to determine up status
  4. Use interoperable IKE Dead Peer Detection for supported permanent-tunnel monitoring

Explanation

Correct Answer

D:

R82 Dead Peer Detection supports third-party gateways, while proprietary tunnel-test packets require Check Point peers. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Site-to-Site communities define gateway membership and tunnel policy; this does not resolve the observed condition.

B:

Permanent tunnels support configured monitoring between Check Point gateways, yet that applies to keep important managed-gateway tunnels continuously monitored rather than the observed issue.

C:

Test packet responses are the basis for permanent tunnel status, but the current evidence calls for a different R82 operation.

Question 605

A custom SmartEvent alert counts repeated legitimate health probes as incidents and pages the SOC repeatedly. Analysts confirm the event logic is relevant but the detection threshold is too sensitive. A proposed change would be to save changes and Install Event Policy, which addresses the different requirement to activate a changed SmartEvent event policy. Which action instead addresses the observed incident?

  1. Save changes and Install Event Policy
  2. Deploy and configure SmartEvent event correlation
  3. Configure the relevant SmartEvent alert reaction
  4. Adjust its event threshold after examining the event

Explanation

Correct Answer

D:

Tuning event thresholds reduces false-positive correlation. This directly addresses the documented incident evidence.

Incorrect Answers

A:

An Event Policy installation activates saved definition changes, but the current evidence calls for a different R82 operation.

B:

SmartEvent correlates log patterns into events; this does not resolve the observed condition.

C:

Event alerts are implemented in SmartEvent reactions, yet that applies to notify an operator for a notable event rather than the observed issue.

Question 606

An R82 operations team has a vendor-approved Jumbo Hotfix for several managed Security Gateways and needs deployment status centralized in SmartConsole. Policy rules are already current and must not be mistaken for software packages. The controls that address the separate requirement to install a specific rather than latest hotfix package are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Select Gateway & Server objects under Central Deployment
  2. Use supported Central Deployment parallel target selection
  3. Select gateways in SmartConsole and Install Hotfix/Jumbo
  4. Choose Install a Specific Hotfix/Jumbo and enter the filename

Explanation

Correct Answer

C:

Central Deployment distributes hotfixes to selected gateway targets. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The deployment selection identifies actual upgrade targets, yet that applies to choose target appliances for a SmartConsole hotfix push rather than the observed issue.

B:

Central Deployment can process several supported targets; this does not resolve the observed condition.

D:

Specific package selection targets the intended hotfix, but the current evidence calls for a different R82 operation.

Question 607

An R82 ElasticXL site operates normally until a technician adds a spare unassigned interface into the existing Sync bond for a cabling test. Member detection becomes intermittent and packets are dropped even though production uplinks stay up. A proposed change would be to wire data interfaces to traffic networks and Sync ports to sync domain, which addresses the different requirement to keep data and synchronization links logically separated. Which action instead addresses the observed incident?

  1. Wire data interfaces to traffic networks and Sync ports to sync domain
  2. Do not add or remove an unassigned Sync-bond interface casually
  3. Add supported members through ElasticXL admission and cloning
  4. Connect Sync ports through dedicated Layer 2 switching or VLAN

Explanation

Correct Answer

B:

Changing unassigned Sync bond members can reset required flags. This directly addresses the documented incident evidence.

Incorrect Answers

A:

ElasticXL uses separate data ports and synchronization connectivity, but the current evidence calls for a different R82 operation.

C:

ElasticXL is designed to scale membership under one gateway object; this does not resolve the observed condition.

D:

ElasticXL Sync requires a shared suitable Layer 2 domain, yet that applies to provide the transport for cluster member synchronization rather than the observed issue.

Question 608

A security administrator is locked on the Standby R82 Management Server after repeated failed logins, but the Active server has no lock entry for that user. Clearing the account on Active has no effect. A proposed change would be to use the Active Management Server for write operations, which addresses the different requirement to make configuration changes while the management pair remains healthy. Which action instead addresses the observed incident?

  1. Run the unlock-administrator API action on that Standby Server
  2. Open the Standby Management Server in read-only SmartConsole mode
  3. Initiate changeover so a healthy standby becomes Active
  4. Use the Active Management Server for write operations

Explanation

Correct Answer

A:

A standby-only lock can require local API action on that node. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Standby permits inspection without competing configuration changes, yet that applies to give analysts access to inspect policies on the standby node rather than the observed issue.

C:

A controlled management changeover restores an Active management server; this does not resolve the observed condition.

D:

Only the Active server accepts normal management changes, but the current evidence calls for a different R82 operation.

Question 609

An internal migration needs a static address translation only for inbound sessions to one legacy server. The team must avoid creating a symmetric outbound mapping for every flow. A proposed change would be to use the Translated Services column in a Manual NAT rule, which addresses the different requirement to translate the destination service port for one published server. Which action instead addresses the observed incident?

  1. Use an Updatable Object based on the service address feed
  2. Create an appropriate one-direction Manual NAT policy rule
  3. Create a Manual NAT rule matching the specified address pair
  4. Use the Translated Services column in a Manual NAT rule

Explanation

Correct Answer

B:

Manual NAT supports direction-specific static translation. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Updatable Objects follow changing externally published addresses; this does not resolve the observed condition.

C:

Manual NAT can match both original source and destination, yet that applies to restrict address translation to a specific source and destination rather than the observed issue.

D:

Manual NAT can translate services as well as addresses, but the current evidence calls for a different R82 operation.

Question 610

A third-party VPN connection uses certificate-based IKE authentication. The peer presents its certificate, but the R82 gateway rejects the issuer because its trust chain was not configured. Algorithms and reachability are confirmed. The controls that address the separate requirement to connect every gateway in a small trusted group directly to peers are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use a Mesh VPN community for peer relationships
  2. Configure matching pre-shared keys on both VPN peers
  3. Configure accepted peer certificates and trusted issuing authority
  4. Review IKE negotiation settings and authentication on both peers

Explanation

Correct Answer

C:

Certificate authentication relies on valid identities and trust. This directly addresses the documented incident evidence.

Incorrect Answers

A:

A Mesh model supports direct relationships among participating members, but the current evidence calls for a different R82 operation.

B:

Both sides need consistent configured IKE authentication secrets, yet that applies to authenticate a third-party IPsec peer with a shared secret rather than the observed issue.

D:

IKE agreement and authentication are prerequisites for tunnel setup; this does not resolve the observed condition.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests