McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 62

Question 610

A third-party VPN connection uses certificate-based IKE authentication. The peer presents its certificate, but the R82 gateway rejects the issuer because its trust chain was not configured. Algorithms and reachability are confirmed. The controls that address the separate requirement to connect every gateway in a small trusted group directly to peers are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use a Mesh VPN community for peer relationships
  2. Configure matching pre-shared keys on both VPN peers
  3. Configure accepted peer certificates and trusted issuing authority
  4. Review IKE negotiation settings and authentication on both peers

Explanation

Correct Answer

C:

Certificate authentication relies on valid identities and trust. This directly addresses the documented incident evidence.

Incorrect Answers

A:

A Mesh model supports direct relationships among participating members, but the current evidence calls for a different R82 operation.

B:

Both sides need consistent configured IKE authentication secrets, yet that applies to authenticate a third-party IPsec peer with a shared secret rather than the observed issue.

D:

IKE agreement and authentication are prerequisites for tunnel setup; this does not resolve the observed condition.

Question 611

A threat-hunting team wants a tailored time-series chart grouped by action and source gateway over filtered R82 log results. The ordinary raw list lacks the visual grouping needed for briefings. An alternate diagnosis concerns the requirement to create a custom security event from selected log fields, for which a colleague suggests define a User-Defined Event and its filters. Based on the recorded symptoms, which corrective step should have priority?

  1. Open Logs & Events and select Views
  2. Define a User-Defined Event and its filters
  3. Access SmartView on the appropriate server web endpoint
  4. Build a customizable view in SmartView or Logs & Events

Explanation

Correct Answer

D:

SmartView supports graphical views and log queries. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Views present monitored security information and visual queries, yet that applies to access a predefined analytical security view rather than the observed issue.

B:

User-defined event filters identify relevant log combinations, but the current evidence calls for a different R82 operation.

C:

SmartView exposes views and reports through its web application; this does not resolve the observed condition.

Question 612

A high-availability ClusterXL object contains two members. An operator wants to install an approved R82 software package through SmartConsole Central Deployment but only the standby member appears selectable in a proposed change ticket. A preliminary suggestion is to deploy packages to the explicitly selected target objects. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Select the cluster object in Central Deployment
  2. Use SmartConsole Central Deployment where supported
  3. Use supported Central Deployment parallel target selection
  4. Deploy packages to the explicitly selected target objects

Explanation

Correct Answer

A:

Central Deployment supports choosing a cluster object. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Central Deployment is the documented gateway best practice; this does not resolve the observed condition.

C:

Central Deployment can process several supported targets, yet that applies to upgrade multiple gateway targets efficiently rather than the observed issue.

D:

Central Deployment scopes actions to selected targets, but the current evidence calls for a different R82 operation.

Question 613

A policy change is approved for an ElasticXL cluster with several physical members. The team sees only one logical cluster gateway object in R82 SmartConsole but wants to install separate unrelated rulebases on each appliance. An alternate diagnosis concerns the requirement to initialize a new ElasticXL installation, for which a colleague suggests run Gaia First Time Configuration Wizard on the first appliance only. Based on the recorded symptoms, which corrective step should have priority?

  1. Run Gaia First Time Configuration Wizard on the first appliance only
  2. Use Gaia Portal Cluster Management Actions > Delete
  3. Add supported members through ElasticXL admission and cloning
  4. Install policy on the cluster single gateway object

Explanation

Correct Answer

D:

The SMO represents the entire cluster for policy management. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The first appliance establishes the configuration cloned to members, but the current evidence calls for a different R82 operation.

B:

Cluster Management supports member removal; this does not resolve the observed condition.

C:

ElasticXL is designed to scale membership under one gateway object, yet that applies to scale out the cluster without changing the gateway identity rather than the observed issue.

Question 614

Two management servers each became Active during a link failure. An administrator proposes clicking Set Standby immediately on one node, but it holds unpublished rule changes absent from the other peer. An alternate diagnosis concerns the requirement to protect policies and rule definitions after active-server failure, for which a colleague suggests promote the synchronized standby management database. Based on the recorded symptoms, which corrective step should have priority?

  1. Open the Standby Management Server in read-only SmartConsole mode
  2. Review which database will be overwritten when setting Standby
  3. Promote the synchronized standby management database
  4. Verify exactly one Active and remaining Standby status

Explanation

Correct Answer

B:

Demoting a server to Standby overwrites its data from the Active peer. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Standby permits inspection without competing configuration changes, yet that applies to give analysts access to inspect policies on the standby node rather than the observed issue.

C:

Synchronized standby retains management configuration for changeover, but the current evidence calls for a different R82 operation.

D:

One Active peer is the expected result of controlled changeover; this does not resolve the observed condition.

Question 615

The NAT logs show that a connection matched automatic source translation for an inside network and automatic destination translation for a published service. An operator assumes one manual first-match rule excludes the other automatically created rule. A preliminary suggestion is to configure supported NAT for management control connections. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Create a Manual NAT rule matching the specified address pair
  2. Use an Updatable Object based on the service address feed
  3. Account for separate matching automatic source and destination rules
  4. Configure supported NAT for management control connections

Explanation

Correct Answer

C:

Automatic NAT can enforce matching source and destination rules. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Manual NAT can match both original source and destination, yet that applies to restrict address translation to a specific source and destination rather than the observed issue.

B:

Updatable Objects follow changing externally published addresses; this does not resolve the observed condition.

D:

Management behind NAT is supported with proper address mapping, but the current evidence calls for a different R82 operation.

Question 616

Two R82 managed Security Gateways have the VPN blade enabled and identical proposals, but the partner gateway never appears as a valid peer in traffic selection. SmartConsole shows no shared VPN community containing both nodes. The controls that address the separate requirement to troubleshoot a stable VPN phase-one but no protected data are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Configure both gateways in the appropriate Site-to-Site VPN community
  2. Verify phase-two traffic selectors and matching policy rules
  3. Use a Star VPN community with the hub as center
  4. Use a Mesh VPN community for peer relationships

Explanation

Correct Answer

A:

Site-to-Site communities define gateway membership and tunnel policy. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Data associations still need matching selectors and permitted traffic, but the current evidence calls for a different R82 operation.

C:

A Star community models branch-to-center connectivity, yet that applies to connect multiple branches through a central hub site rather than the observed issue.

D:

A Mesh model supports direct relationships among participating members; this does not resolve the observed condition.

Question 617

Repeated high-confidence malware events require an approved automatic response after correlation succeeds. The detection filter, threshold and severity are correct. Analysts currently receive a report but no response action occurs. The operator must distinguish this from a separate requirement to activate user-defined event modifications after editing. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Save and install the updated SmartEvent Event Policy
  2. Assign appropriate SmartEvent event severity
  3. Adjust its event threshold after examining the event
  4. Assign an Automatic Reaction to its event definition

Explanation

Correct Answer

D:

Automatic Reactions connect event detection to responses. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Event policy installation publishes event-definition changes, but the current evidence calls for a different R82 operation.

B:

Event definitions include configurable severity where supported, yet that applies to distinguish critical from informational event definitions rather than the observed issue.

C:

Tuning event thresholds reduces false-positive correlation; this does not resolve the observed condition.

Question 618

A change window will run Check Point’s Central Deployment Tool to update software on gateway members across remote branches. The installer asks to run the tool directly on a branch firewall with no management authorization. The operator must distinguish this from a separate requirement to retain a recoverable state before a gateway OS change. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Use SmartConsole Central Deployment where supported
  2. Run the Central Deployment Tool from the Management Server
  3. Capture a supported backup/snapshot and upgrade plan
  4. Check Management Server connectivity to selected gateways

Explanation

Correct Answer

B:

CDT uses the Management Server to deploy to gateways. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Central Deployment is the documented gateway best practice; this does not resolve the observed condition.

C:

Recovery artifacts make a failed upgrade safer to reverse, but the current evidence calls for a different R82 operation.

D:

Remote deployment depends on control connectivity to targets, yet that applies to verify network reachability for remote package deployment rather than the observed issue.

Question 619

A customer plans to enable traditional VSX mode on an already installed R82 ElasticXL cluster. The installation guide states that ElasticXL supports VSNext, and the VSNext choice must be made during installation. The controls that address the separate requirement to check membership count and topology before scaling are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Select VSNext rather than unsupported Traditional VSX mode
  2. Keep SecureXL in Kernel Mode (KPPAK) and retain default CoreXL Dynamic Balancing
  3. Use insights or show cluster info provision live
  4. Review supported platform and cluster membership limits

Explanation

Correct Answer

A:

ElasticXL supports VSNext mode. This directly addresses the documented incident evidence.

Incorrect Answers

B:

ElasticXL requires KPPAK and Check Point recommends retaining the default CoreXL Dynamic Balancing configuration, yet that applies to maintain R82-supported acceleration and default scheduling in an ElasticXL Cluster rather than the observed issue.

C:

ElasticXL provides member onboarding and clone status commands; this does not resolve the observed condition.

D:

ElasticXL has documented platform and membership constraints, but the current evidence calls for a different R82 operation.

Question 620

During an R82 management HA installation review, both peers have different internal IP addresses, and a technician calls the higher-address peer the primary. The deployment record shows which management server was installed first. The controls that address the separate requirement to make configuration changes while the management pair remains healthy are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use the Active Management Server for write operations
  2. Initiate changeover so a healthy standby becomes Active
  3. Treat the first installed management server as the primary
  4. Leave the newly defined secondary Management Server in Standby

Explanation

Correct Answer

C:

Installation sequence defines primary versus secondary roles. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Only the Active server accepts normal management changes, but the current evidence calls for a different R82 operation.

B:

A controlled management changeover restores an Active management server; this does not resolve the observed condition.

D:

Secondary management servers start in Standby by default, yet that applies to assign the default role to newly installed secondary management rather than the observed issue.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests