McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 51

Question 500

After a new ISP circuit is added, traffic in an R82 VPN community unexpectedly negotiates from a backup WAN interface. The peer has pinned the primary public address. Routing is valid and IKE proposals match. The operator must distinguish this from a separate requirement to choose the outgoing gateway address for VPN traffic. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Change unrelated gateway Automatic Hide NAT rules before checking the selected local VPN interface and advertised address
  2. Configure VPN Load Sharing through Link Selection when supported
  3. Configure supported Enhanced Link Selection interfaces and redundancy for the cloud peer
  4. Confirm chosen local interface and peer-advertised address

Explanation

Correct Answer

D:

Link Selection determines the address advertised and route used. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Changing source Hide NAT does not establish the VPN gateway public-address choice reported by the remote peer.

B:

VPN Link Selection can share VPN traffic across available links, yet that applies to define how VPN traffic is distributed across multiple usable links rather than the observed issue.

C:

Enhanced Link Selection supports cloud IPsec redundancy without proprietary RDP, with DAIP and platform limits; this does not resolve the observed condition.

Question 501

SmartEvent receives 40 matching denied-login logs in a minute. The current custom event fires on one log, overwhelming analysts. They want one correlated event only when at least 25 matching logs occur in 60 seconds. An alternate diagnosis concerns the requirement to correlate suspicious activity across many gateway logs, for which a colleague suggests deploy and configure SmartEvent event correlation. Based on the recorded symptoms, which corrective step should have priority?

  1. Configure a SmartEvent threshold of log count and seconds
  2. Configure the relevant SmartEvent alert reaction
  3. Configure a Time Object for the event definition
  4. Deploy and configure SmartEvent event correlation

Explanation

Correct Answer

A:

SmartEvent threshold combines frequency and interval. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Event alerts are implemented in SmartEvent reactions, yet that applies to notify an operator for a notable event rather than the observed issue.

C:

SmartEvent can use time objects for working-hours events; this does not resolve the observed condition.

D:

SmartEvent correlates log patterns into events, but the current evidence calls for a different R82 operation.

Question 502

For a phased fleet rollout, twenty managed R82 gateways require a coordinated software upgrade. Central Deployment supports selecting a fleet but queues targets beyond the supported concurrent installation limit. Which deployment approach satisfies the batch requirement?

  1. Rely on policy-install concurrency settings to increase the number of simultaneous firmware upgrades
  2. Select Gateway & Server objects under Central Deployment
  3. Use Central Deployment Version Upgrade to Specific Major Version
  4. Use supported Central Deployment parallel target selection

Explanation

Correct Answer

D:

Central Deployment can process several supported targets. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Rely on policy-install concurrency settings to increase the number of simultaneous firmware upgrades. Policy installation is a separate operation; the task requires software-package Central Deployment, not firewall-policy installation.

B:

The deployment selection identifies actual upgrade targets; this does not resolve the observed condition.

C:

Central Deployment offers target-version selection, but the current evidence calls for a different R82 operation.

Question 503

A security management upgrade from an older supported release has been approved, but the migration precheck reports an invalid object name as an error. The team proposes proceeding because export completed. The controls that address the separate requirement to select an appropriate migration pathway between hosts are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use Upgrade with Migration for new-server clean-install cutover
  2. Apply the documented skip_upgrade_tools_check option where appropriate
  3. Run and review the documented Pre-Upgrade Verifier where applicable
  4. Repair reported issues and rerun the verifier

Explanation

Correct Answer

C:

Pre-upgrade checks identify incompatible conditions before cutover. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Migration exports management state and imports to a separate target, but the current evidence calls for a different R82 operation.

B:

Offline workflow supports skipping the online upgrade-tool check; this does not resolve the observed condition.

D:

Re-running checks confirms remediation before target upgrade, yet that applies to resolve reported pre-upgrade verifier errors rather than the observed issue.

Question 504

An ElasticXL cluster has five healthy members and one failed appliance will be permanently removed. The remaining members and their single logical gateway policy must stay available. The operator must distinguish this from a separate requirement to manage an ElasticXL cluster as one logical gateway in SmartConsole. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Create one Single Management Object for the entire cluster
  2. Use Gaia Portal Cluster Management Actions > Delete
  3. Use Gaia gClish for global cluster commands
  4. Use Gaia Portal Cluster Management > Pending Gateways

Explanation

Correct Answer

B:

Cluster Management supports member removal. This directly addresses the documented incident evidence.

Incorrect Answers

A:

ElasticXL exposes one logical Security Gateway management object, but the current evidence calls for a different R82 operation.

C:

gClish supports global member-oriented cluster administration; this does not resolve the observed condition.

D:

Pending Gateways is the supported member-admission workflow, yet that applies to add a powered-on appliance detected on the sync segment rather than the observed issue.

Question 505

An internal audit needs to inspect the currently synchronized R82 Access Control rulebase directly on the standby management peer. The auditors must not modify or publish policy, and the active server will remain in service. The controls that address the separate requirement to protect useful changes before demoting a colliding management node are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Promote the synchronized standby management database
  2. Run the unlock-administrator API action on that Standby Server
  3. Review which database will be overwritten when setting Standby
  4. Open the Standby Management Server in read-only SmartConsole mode

Explanation

Correct Answer

D:

Standby permits inspection without competing configuration changes. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Synchronized standby retains management configuration for changeover, yet that applies to protect policies and rule definitions after active-server failure rather than the observed issue.

B:

A standby-only lock can require local API action on that node; this does not resolve the observed condition.

C:

Demoting a server to Standby overwrites its data from the Active peer, but the current evidence calls for a different R82 operation.

Question 506

A security gateway must rewrite both the source address of a partner request and its destination address toward an internal server for one connection. Automatic object NAT does not express the combined translation criteria. An alternate diagnosis concerns the requirement to understand behavior when several Manual NAT rules could match, for which a colleague suggests place the intended matching rule first in the NAT rule order. Based on the recorded symptoms, which corrective step should have priority?

  1. Create a Manual NAT rule with both translated fields
  2. Use the Translated Services column in a Manual NAT rule
  3. Account for separate matching automatic source and destination rules
  4. Place the intended matching rule first in the NAT rule order

Explanation

Correct Answer

A:

Manual NAT allows simultaneous source and destination translation. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Manual NAT can translate services as well as addresses; this does not resolve the observed condition.

C:

Automatic NAT can enforce matching source and destination rules, yet that applies to handle an automatic source and destination NAT match rather than the observed issue.

D:

Only the first matching Manual NAT rule is enforced, but the current evidence calls for a different R82 operation.

Question 507

A Security Gateway has active and backup external VPN interfaces. The primary next hop becomes unreachable during a maintenance test, but the gateway keeps trying that circuit. The cloud peer is otherwise healthy. A preliminary suggestion is to configure VPN Load Sharing through Link Selection when supported. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Configure the gateway Link Selection settings
  2. Configure Link Selection probing and redundant paths
  3. Configure supported Enhanced Link Selection interfaces and redundancy for the cloud peer
  4. Configure VPN Load Sharing through Link Selection when supported

Explanation

Correct Answer

B:

Availability probes help choose working links. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Link Selection controls VPN interface and address selection, yet that applies to choose the outgoing gateway address for VPN traffic rather than the observed issue.

C:

Enhanced Link Selection supports cloud IPsec redundancy without proprietary RDP, with DAIP and platform limits; this does not resolve the observed condition.

D:

VPN Link Selection can share VPN traffic across available links, but the current evidence calls for a different R82 operation.

Question 508

The SOC needs a correlation event for a new application log field that no predefined SmartEvent rule currently uses. The event must match a specified product and code, then apply its own threshold. A proposed change would be to save and install the updated SmartEvent Event Policy, which addresses the different requirement to activate user-defined event modifications after editing. Which action instead addresses the observed incident?

  1. Configure Event Format field display mapping
  2. Save and install the updated SmartEvent Event Policy
  3. Define a User-Defined Event and its filters
  4. Build a customizable view in SmartView or Logs & Events

Explanation

Correct Answer

C:

User-defined event filters identify relevant log combinations. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Event Format determines which event details are displayed; this does not resolve the observed condition.

B:

Event policy installation publishes event-definition changes, but the current evidence calls for a different R82 operation.

D:

SmartView supports graphical views and log queries, yet that applies to create a custom graphic for log search results rather than the observed issue.

Question 509

A security management server itself needs an R82 in-place update using a supported path. The operator proposes gateway Central Deployment because it updated the network firewalls yesterday. A proposed change would be to consult the R82 supported upgrade methods by component type, which addresses the different requirement to assess available upgrade pathways before execution. Which action instead addresses the observed incident?

  1. Use CPUSE for a compatible management-server in-place upgrade
  2. Consult the R82 supported upgrade methods by component type
  3. Choose a documented management Upgrade or Migration method
  4. Use SmartConsole Central Deployment where supported

Explanation

Correct Answer

A:

CPUSE supports management in-place upgrade workflows. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Upgrade method support differs for gateways and management servers, but the current evidence calls for a different R82 operation.

C:

Management databases use their supported upgrade and migration workflows, yet that applies to plan an upgrade of a management-server database rather than the observed issue.

D:

Central Deployment is the documented gateway best practice; this does not resolve the observed condition.

Question 510

An R82 management replacement is being staged on a new server with equivalent role and a reachable management network. Existing objects, policy revisions, and settings must survive. The vendor migration tools are installed on both systems. The controls that address the separate requirement to quiesce the source during database export are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Close SmartConsole GUI clients on the source server
  2. Invoke migrate_server import for the exported archive
  3. Invoke migrate_server export from the prescribed scripts directory
  4. Export on the source and import on the destination

Explanation

Correct Answer

D:

Management migration preserves the database through export/import. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Closing clients avoids concurrent management modifications, but the current evidence calls for a different R82 operation.

B:

The migration import restores the exported management database; this does not resolve the observed condition.

C:

The management migration tool serializes the management database, yet that applies to run management database export with the R82 migration tool rather than the observed issue.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests