McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 49

Question 480

Compliance reviewers ask why a managed gateway’s security rulebase fails specific Check Point best practices. Analysts have only log searches and cannot see configuration-grade rule findings. A proposed change would be to review Regulatory Compliance requirements and scores, which addresses the different requirement to inspect a policy against a regulatory framework. Which action instead addresses the observed incident?

  1. Review Regulatory Compliance requirements and scores
  2. Activate the Compliance Software Blade
  3. Open Logs & Events and select Views
  4. Generate a Compliance Blade report in the Reports view

Explanation

Correct Answer

B:

Compliance evaluates Check Point security best practices. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Compliance maps checks to selected regulatory requirements, but the current evidence calls for a different R82 operation.

C:

Views present monitored security information and visual queries; this does not resolve the observed condition.

D:

Compliance reporting supports a PDF output, yet that applies to prepare a PDF summary of compliance findings rather than the observed issue.

Question 481

A managed gateway still runs the old major Check Point release. The approved change is to upgrade that gateway to the documented compatible R82 major version, not apply a Jumbo Hotfix and not change policy. The controls that address the separate requirement to validate installed hotfix levels after deployment are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use the Gateway & Servers deployment actions in SmartConsole
  2. Review the package installation and gateway version result
  3. Use the Version Upgrade action on the selected gateway
  4. Use the Install Hotfix/Jumbo deployment action

Explanation

Correct Answer

C:

The Version Upgrade action deploys supported gateway software. This directly addresses the documented incident evidence.

Incorrect Answers

A:

SmartConsole exposes centrally managed software deployment actions; this does not resolve the observed condition.

B:

Actual installed version proves the deployment target state, but the current evidence calls for a different R82 operation.

D:

Hotfix deployment targets fixes on the existing release, yet that applies to apply hotfixes without changing a major release rather than the observed issue.

Question 482

A replacement R82 Management Server database archive has passed integrity and license checks, and the cutover team plans to import it into the target. They assumed existing Check Point services would remain continuously available throughout the import. An alternate diagnosis concerns the requirement to confirm a valid management license before import, for which a colleague suggests verify license state on the destination with cplic print. Based on the recorded symptoms, which corrective step should have priority?

  1. Expect the import procedure to restart Check Point services
  2. Invoke migrate_server import for the exported archive
  3. Verify license state on the destination with cplic print
  4. Back up the current management configuration first

Explanation

Correct Answer

A:

The documented import invokes stop/start for Check Point services. This directly addresses the documented incident evidence.

Incorrect Answers

B:

The migration import restores the exported management database, yet that applies to import the exported R82 database on the replacement server rather than the observed issue.

C:

License validation is part of the documented import preparation, but the current evidence calls for a different R82 operation.

D:

The R82 migration procedure begins with source backups; this does not resolve the observed condition.

Question 483

An ElasticXL cluster has five healthy members and one failed appliance will be permanently removed. The remaining members and their single logical gateway policy must stay available. A proposed change would be to use Gaia gClish for global cluster commands, which addresses the different requirement to enter cluster-aware Gaia configuration context. Which action instead addresses the observed incident?

  1. Use Gaia Portal Cluster Management > Pending Gateways
  2. Use Gaia Portal Cluster Management Actions > Delete
  3. Create one Single Management Object for the entire cluster
  4. Use Gaia gClish for global cluster commands

Explanation

Correct Answer

B:

Cluster Management supports member removal. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Pending Gateways is the supported member-admission workflow, yet that applies to add a powered-on appliance detected on the sync segment rather than the observed issue.

C:

ElasticXL exposes one logical Security Gateway management object; this does not resolve the observed condition.

D:

gClish supports global member-oriented cluster administration, but the current evidence calls for a different R82 operation.

Question 484

A standby R82 Management Server is synchronized and reachable, but SmartConsole opened against that standby lets an auditor view objects without modifying them. An administrator must publish a new outbound access rule without causing an HA role change. An alternate diagnosis concerns the requirement to identify the initial primary management server during installation, for which a colleague suggests treat the first installed management server as the primary. Based on the recorded symptoms, which corrective step should have priority?

  1. Treat the first installed management server as the primary
  2. Use Management HA actions to set one server to Standby
  3. Initiate changeover so a healthy standby becomes Active
  4. Use the Active Management Server for write operations

Explanation

Correct Answer

D:

Only the Active server accepts normal management changes. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Installation sequence defines primary versus secondary roles, but the current evidence calls for a different R82 operation.

B:

One Active server is required for a consistent normal HA state; this does not resolve the observed condition.

C:

A controlled management changeover restores an Active management server, yet that applies to recover administration when the active management node goes offline rather than the observed issue.

Question 485

An Access Control rule refers to an Updatable Object representing a cloud provider. A provider adds addresses overnight and the gateway updates its membership without a SmartConsole policy-install task. A proposed change would be to reference the object directly in eligible policy rule columns, which addresses the different requirement to maintain supported membership for an Updatable Object. Which action instead addresses the observed incident?

  1. Let the Updatable Object update on the Security Gateway
  2. Use an Updatable Object in Protected Scope
  3. Use an Updatable Object based on the service address feed
  4. Reference the object directly in eligible policy rule columns

Explanation

Correct Answer

A:

An Updatable Object membership refresh does not require policy reinstall. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Threat Prevention supports updatable membership for Protected Scope, yet that applies to scope Threat Prevention protections to a dynamic cloud service rather than the observed issue.

C:

Updatable Objects follow changing externally published addresses; this does not resolve the observed condition.

D:

Updatable Objects can be used directly in supported policy fields, but the current evidence calls for a different R82 operation.

Question 486

Two R82 managed Security Gateways have the VPN blade enabled and identical proposals, but the partner gateway never appears as a valid peer in traffic selection. SmartConsole shows no shared VPN community containing both nodes. The operator must distinguish this from a separate requirement to connect multiple branches through a central hub site. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Use a Star VPN community with the hub as center
  2. Verify phase-two traffic selectors and matching policy rules
  3. Configure both gateways in the appropriate Site-to-Site VPN community
  4. Use a Mesh VPN community for peer relationships

Explanation

Correct Answer

C:

Site-to-Site communities define gateway membership and tunnel policy. This directly addresses the documented incident evidence.

Incorrect Answers

A:

A Star community models branch-to-center connectivity, but the current evidence calls for a different R82 operation.

B:

Data associations still need matching selectors and permitted traffic, yet that applies to troubleshoot a stable VPN phase-one but no protected data rather than the observed issue.

D:

A Mesh model supports direct relationships among participating members; this does not resolve the observed condition.

Question 487

The SOC needs to inspect real-time Check Point logs from an analyst workstation where installing SmartConsole is prohibited. HTTPS access to the relevant management or event server is allowed. The controls that address the separate requirement to create a custom graphic for log search results are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Build a customizable view in SmartView or Logs & Events
  2. Open Logs & Events and select Reports
  3. Open Logs & Events and select Views
  4. Access SmartView on the appropriate server web endpoint

Explanation

Correct Answer

D:

SmartView exposes views and reports through its web application. This directly addresses the documented incident evidence.

Incorrect Answers

A:

SmartView supports graphical views and log queries, but the current evidence calls for a different R82 operation.

B:

Reports summarize monitored activity for presentation; this does not resolve the observed condition.

C:

Views present monitored security information and visual queries, yet that applies to access a predefined analytical security view rather than the observed issue.

Question 488

An R82 administrator wants to push an approved software package to two members of a managed high-availability gateway cluster. They are selecting targets in SmartConsole and accidentally highlight the Management Server object alone. The operator must distinguish this from a separate requirement to upgrade multiple gateway targets efficiently. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Select gateways in SmartConsole and Install Hotfix/Jumbo
  2. Select Gateway & Server objects under Central Deployment
  3. Use supported Central Deployment parallel target selection
  4. Use SmartConsole Central Deployment where supported

Explanation

Correct Answer

B:

The deployment selection identifies actual upgrade targets. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Central Deployment distributes hotfixes to selected gateway targets, yet that applies to apply a hotfix to a set of Security Gateways rather than the observed issue.

C:

Central Deployment can process several supported targets, but the current evidence calls for a different R82 operation.

D:

Central Deployment is the documented gateway best practice; this does not resolve the observed condition.

Question 489

The new R82 Management Server successfully imported its database and will assume the old server’s management role. The old source host still has its network connections active, and both could respond as the controlling manager. A preliminary suggestion is to close SmartConsole GUI clients on the source server. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Use Upgrade with Migration for new-server clean-install cutover
  2. Disconnect the retired source before activating its replacement
  3. Close SmartConsole GUI clients on the source server
  4. Connect the new management host on the intended network

Explanation

Correct Answer

B:

Controlled cutover prevents conflicting management authorities. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Migration exports management state and imports to a separate target; this does not resolve the observed condition.

C:

Closing clients avoids concurrent management modifications, but the current evidence calls for a different R82 operation.

D:

The new server needs appropriate network connectivity to manage gateways, yet that applies to bring the replacement management server online after import rather than the observed issue.

Question 490

An administrator needs to move a member from ElasticXL Site 1 into Site 2. It already appears as a managed member of Site 1, so it is not pending for enrollment in the second site. A preliminary suggestion is to do not add or remove an unassigned Sync-bond interface casually. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Do not add or remove an unassigned Sync-bond interface casually
  2. Create a new Site while admitting the pending appliance
  3. Add the pending appliance to the existing Site
  4. Remove it then add as a pending member to the target site

Explanation

Correct Answer

D:

The documented workflow removes and re-adds a node to the chosen site. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Changing unassigned Sync bond members can reset required flags, but the current evidence calls for a different R82 operation.

B:

A new site is used to establish High Availability sites; this does not resolve the observed condition.

C:

Adding to the existing site enables supported load sharing, yet that applies to increase capacity inside an existing ElasticXL Site rather than the observed issue.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests