McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 53

Question 520

The NAT logs show that a connection matched automatic source translation for an inside network and automatic destination translation for a published service. An operator assumes one manual first-match rule excludes the other automatically created rule. A proposed change would be to create a Manual NAT rule with both translated fields, which addresses the different requirement to translate the source and destination IP in one connection. Which action instead addresses the observed incident?

  1. Open Security Policies > Access Control > NAT
  2. Account for separate matching automatic source and destination rules
  3. Place the intended matching rule first in the NAT rule order
  4. Create a Manual NAT rule with both translated fields

Explanation

Correct Answer

B:

Automatic NAT can enforce matching source and destination rules. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The Access Control NAT policy contains manual translation rules; this does not resolve the observed condition.

C:

Only the first matching Manual NAT rule is enforced, yet that applies to understand behavior when several Manual NAT rules could match rather than the observed issue.

D:

Manual NAT allows simultaneous source and destination translation, but the current evidence calls for a different R82 operation.

Question 521

Two external interfaces provide different VPN qualities and a service-specific policy must select a different link for latency-sensitive traffic than for bulk transfer. Static routing still works for the peer. The controls that address the separate requirement to choose the outgoing gateway address for VPN traffic are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Review Service Based Link Selection policies
  2. Configure the gateway Link Selection settings
  3. Configure VPN Load Sharing through Link Selection when supported
  4. Configure supported Enhanced Link Selection interfaces and redundancy for the cloud peer

Explanation

Correct Answer

A:

Service Based Link Selection addresses bandwidth usage by service. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Link Selection controls VPN interface and address selection, but the current evidence calls for a different R82 operation.

C:

VPN Link Selection can share VPN traffic across available links, yet that applies to define how VPN traffic is distributed across multiple usable links rather than the observed issue.

D:

Enhanced Link Selection supports cloud IPsec redundancy without proprietary RDP, with DAIP and platform limits; this does not resolve the observed condition.

Question 522

Security analysts open an R82 SmartEvent detail panel, but a new enrichment field exists in logs and is absent from the event summary display. The detection definition and severity are already correct. The controls that address the separate requirement to create a custom security event from selected log fields are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Save and install the updated SmartEvent Event Policy
  2. Configure Event Format field display mapping
  3. Define a User-Defined Event and its filters
  4. Edit the relevant Event Definition threshold

Explanation

Correct Answer

B:

Event Format determines which event details are displayed. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Event policy installation publishes event-definition changes, yet that applies to activate user-defined event modifications after editing rather than the observed issue.

C:

User-defined event filters identify relevant log combinations, but the current evidence calls for a different R82 operation.

D:

The event definition controls the correlation trigger; this does not resolve the observed condition.

Question 523

An audit change advisory names a specific CPUSE Jumbo Hotfix rather than the newest available package. The gateway is eligible, but selecting the GUI’s Recommended Major Version would exceed the authorized change. The operator must distinguish this from a separate requirement to install a specific rather than latest hotfix package. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Use the Install Hotfix/Jumbo deployment action
  2. Use SmartConsole Central Deployment where supported
  3. Search for the named Hotfix/Jumbo package in deployment UI
  4. Choose Install a Specific Hotfix/Jumbo and enter the filename

Explanation

Correct Answer

C:

The specific-package lookup matches the approved advisory. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Hotfix deployment targets fixes on the existing release, yet that applies to apply hotfixes without changing a major release rather than the observed issue.

B:

Central Deployment is the documented gateway best practice; this does not resolve the observed condition.

D:

Specific package selection targets the intended hotfix, but the current evidence calls for a different R82 operation.

Question 524

A security management upgrade from an older supported release has been approved, but the migration precheck reports an invalid object name as an error. The team proposes proceeding because export completed. An alternate diagnosis concerns the requirement to resolve reported pre-upgrade verifier errors, for which a colleague suggests repair reported issues and rerun the verifier. Based on the recorded symptoms, which corrective step should have priority?

  1. Back up the current management configuration first
  2. Repair reported issues and rerun the verifier
  3. Use Upgrade with Migration for new-server clean-install cutover
  4. Run and review the documented Pre-Upgrade Verifier where applicable

Explanation

Correct Answer

D:

Pre-upgrade checks identify incompatible conditions before cutover. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The R82 migration procedure begins with source backups; this does not resolve the observed condition.

B:

Re-running checks confirms remediation before target upgrade, but the current evidence calls for a different R82 operation.

C:

Migration exports management state and imports to a separate target, yet that applies to select an appropriate migration pathway between hosts rather than the observed issue.

Question 525

During an ElasticXL cabling audit, a node’s production data ports are joined to the dedicated synchronization VLAN instead of the required network segments. The Sync ports already share a Layer 2 domain. A proposed change would be to do not add or remove an unassigned Sync-bond interface casually, which addresses the different requirement to avoid disrupting ElasticXL internal sync operation. Which action instead addresses the observed incident?

  1. Use Gaia Portal Cluster Management > Pending Gateways
  2. Connect Sync ports through dedicated Layer 2 switching or VLAN
  3. Do not add or remove an unassigned Sync-bond interface casually
  4. Wire data interfaces to traffic networks and Sync ports to sync domain

Explanation

Correct Answer

D:

ElasticXL uses separate data ports and synchronization connectivity. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Pending Gateways is the supported member-admission workflow; this does not resolve the observed condition.

B:

ElasticXL Sync requires a shared suitable Layer 2 domain, yet that applies to provide the transport for cluster member synchronization rather than the observed issue.

C:

Changing unassigned Sync bond members can reset required flags, but the current evidence calls for a different R82 operation.

Question 526

After an R82 management pair is formed, analysts compare object and Access Control revisions on both peers and find only changes published on the active manager appear on the standby. The gateway clustering mechanism is independent. A preliminary suggestion is to plan management-server redundancy separately from gateway clustering. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Plan management-server redundancy separately from gateway clustering
  2. Use Management High Availability database synchronization
  3. Open the Management High Availability status in SmartConsole
  4. Confirm peer state and re-synchronize management databases

Explanation

Correct Answer

B:

Management HA synchronizes the management databases and revisions. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Management HA protects the management database and administration, but the current evidence calls for a different R82 operation.

C:

Management HA status reports peer role and synchronization health, yet that applies to review whether the management HA partner is synchronized rather than the observed issue.

D:

Management synchronization restores the appropriate structured peer state; this does not resolve the observed condition.

Question 527

Only HTTPS traffic from a specified partner to one hosted service should have its destination TCP port rewritten; SSH to the same address must not be translated. The NAT object matches both sources currently. The controls that address the separate requirement to apply newly edited manual NAT definitions to target gateways are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Publish the session and install the relevant security policy
  2. Create translated objects, NAT rule, and matching Access Control rule
  3. Match Original Services and set corresponding Translated Services
  4. Create a Manual NAT rule matching the specified address pair

Explanation

Correct Answer

C:

Manual NAT can restrict rules by service and translated port. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Published and installed policy activates gateway enforcement changes, but the current evidence calls for a different R82 operation.

B:

Manual NAT workflows also require valid translated objects and access; this does not resolve the observed condition.

D:

Manual NAT can match both original source and destination, yet that applies to restrict address translation to a specific source and destination rather than the observed issue.

Question 528

A third-party VPN connection uses certificate-based IKE authentication. The peer presents its certificate, but the R82 gateway rejects the issuer because its trust chain was not configured. Algorithms and reachability are confirmed. The controls that address the separate requirement to protect traffic between two managed security gateways are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Configure accepted peer certificates and trusted issuing authority
  2. Configure both gateways in the appropriate Site-to-Site VPN community
  3. Review IKE negotiation settings and authentication on both peers
  4. Configure matching pre-shared keys on both VPN peers

Explanation

Correct Answer

A:

Certificate authentication relies on valid identities and trust. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Site-to-Site communities define gateway membership and tunnel policy, but the current evidence calls for a different R82 operation.

C:

IKE agreement and authentication are prerequisites for tunnel setup; this does not resolve the observed condition.

D:

Both sides need consistent configured IKE authentication secrets, yet that applies to authenticate a third-party IPsec peer with a shared secret rather than the observed issue.

Question 529

An access alert triggers during routine approved overnight maintenance, but the compliance team only wants alerts for unauthorized out-of-hours login activity. The event should use an explicit schedule instead of continually changing thresholds. The operator must distinguish this from a separate requirement to create an alert after repeated matching logs in a time window. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Configure a Time Object for the event definition
  2. Save and install the updated SmartEvent Event Policy
  3. Configure a SmartEvent threshold of log count and seconds
  4. Deploy and configure SmartEvent event correlation

Explanation

Correct Answer

A:

SmartEvent can use time objects for working-hours events. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Event policy installation publishes event-definition changes; this does not resolve the observed condition.

C:

SmartEvent threshold combines frequency and interval, but the current evidence calls for a different R82 operation.

D:

SmartEvent correlates log patterns into events, yet that applies to correlate suspicious activity across many gateway logs rather than the observed issue.

Question 530

A Check Point gateway still runs R80.30 and the change ticket requests R82 directly. The team has not confirmed whether this source version can follow a single upgrade step, and the package is not yet installed. An alternate diagnosis concerns the requirement to identify a management upgrade that includes database export/import, for which a colleague suggests use Advanced Upgrade or migration rather than gateway CDT. Based on the recorded symptoms, which corrective step should have priority?

  1. Use CPUSE for a compatible management-server in-place upgrade
  2. Use Advanced Upgrade or migration rather than gateway CDT
  3. Run the Central Deployment Tool from the Management Server
  4. Consult the R82 supported upgrade methods by component type

Explanation

Correct Answer

D:

Upgrade method support differs for gateways and management servers. This directly addresses the documented incident evidence.

Incorrect Answers

A:

CPUSE supports management in-place upgrade workflows, yet that applies to perform a management in-place upgrade with supported tooling rather than the observed issue.

B:

Management upgrading can require exporting and importing database content, but the current evidence calls for a different R82 operation.

C:

CDT uses the Management Server to deploy to gateways; this does not resolve the observed condition.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests