McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 48

Question 470

Management High Availability shows Sync Error for a standby database. Network connectivity and SIC between the two R82 management peers both pass, and exactly one member is Active. No pending SmartConsole edits remain. The operator must distinguish this from a separate requirement to investigate HA status showing Not Communicating. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Use Management High Availability database synchronization
  2. Check connectivity between management servers first
  3. Open the Management High Availability status in SmartConsole
  4. Initiate a manual synchronization between management peers

Explanation

Correct Answer

D:

A manual sync is the documented response to Sync Error. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Management HA synchronizes the management databases and revisions; this does not resolve the observed condition.

B:

Peer reachability is a first troubleshooting check for lost communication, but the current evidence calls for a different R82 operation.

C:

Management HA status reports peer role and synchronization health, yet that applies to review whether the management HA partner is synchronized rather than the observed issue.

Question 471

An internal application is published through an additional public IP using Manual NAT. The NAT and Access Control rules are installed, but upstream hosts on the gateway LAN cannot resolve the translated address to a MAC. An alternate diagnosis concerns the requirement to set a stable translated address for a management-server object, for which a colleague suggests configure the Management Server object NAT settings for Static translation. Based on the recorded symptoms, which corrective step should have priority?

  1. Create a Manual NAT rule with both translated fields
  2. Configure the Management Server object NAT settings for Static translation
  3. Configure required Proxy ARP entries for the translated address
  4. Create translated objects, NAT rule, and matching Access Control rule

Explanation

Correct Answer

C:

Manual NAT deployments require Proxy ARP where applicable. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Manual NAT allows simultaneous source and destination translation; this does not resolve the observed condition.

B:

Management-object NAT defines the externally reachable translated address, but the current evidence calls for a different R82 operation.

D:

Manual NAT workflows also require valid translated objects and access, yet that applies to publish a server using a manually translated address rather than the observed issue.

Question 472

IKE phase one completes to a partner, but the partner log rejects child security associations because traffic selectors do not agree. Both public endpoints and credentials are correct. A preliminary suggestion is to use the matching IPv6-in-IPv6 tunnel scheme and IKEv2. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Review IKE negotiation settings and authentication on both peers
  2. Verify phase-two traffic selectors and matching policy rules
  3. Configure matching pre-shared keys on both VPN peers
  4. Use the matching IPv6-in-IPv6 tunnel scheme and IKEv2

Explanation

Correct Answer

B:

Data associations still need matching selectors and permitted traffic. This directly addresses the documented incident evidence.

Incorrect Answers

A:

IKE agreement and authentication are prerequisites for tunnel setup; this does not resolve the observed condition.

C:

Both sides need consistent configured IKE authentication secrets, yet that applies to authenticate a third-party IPsec peer with a shared secret rather than the observed issue.

D:

R82 IPv6 VPN tunneling uses IPv6 within IPv6 and IKEv2, but the current evidence calls for a different R82 operation.

Question 473

A custom SmartEvent detection correctly flags unusual authentication activity, but a known approved monitoring subnet must be excluded to prevent daily false positives. The team cannot disable the entire event or reduce detection elsewhere. A proposed change would be to adjust its event threshold after examining the event, which addresses the different requirement to reduce false alerts for a noisy SmartEvent definition. Which action instead addresses the observed incident?

  1. Assign appropriate SmartEvent event severity
  2. Deploy and configure SmartEvent event correlation
  3. Adjust its event threshold after examining the event
  4. Configure a suitable event exception or exclusion

Explanation

Correct Answer

D:

Event definitions support exceptions and exclusions for noisy patterns. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Event definitions include configurable severity where supported, yet that applies to distinguish critical from informational event definitions rather than the observed issue.

B:

SmartEvent correlates log patterns into events; this does not resolve the observed condition.

C:

Tuning event thresholds reduces false-positive correlation, but the current evidence calls for a different R82 operation.

Question 474

A security management server itself needs an R82 in-place update using a supported path. The operator proposes gateway Central Deployment because it updated the network firewalls yesterday. The controls that address the separate requirement to identify a management upgrade that includes database export/import are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use CPUSE for a compatible management-server in-place upgrade
  2. Consult the R82 supported upgrade methods by component type
  3. Use Advanced Upgrade or migration rather than gateway CDT
  4. Capture a supported backup/snapshot and upgrade plan

Explanation

Correct Answer

A:

CPUSE supports management in-place upgrade workflows. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Upgrade method support differs for gateways and management servers, yet that applies to assess available upgrade pathways before execution rather than the observed issue.

C:

Management upgrading can require exporting and importing database content, but the current evidence calls for a different R82 operation.

D:

Recovery artifacts make a failed upgrade safer to reverse; this does not resolve the observed condition.

Question 475

The new R82 Management Server successfully imported its database and will assume the old server’s management role. The old source host still has its network connections active, and both could respond as the controlling manager. An alternate diagnosis concerns the requirement to preserve management server identity and reachability through cutover, for which a colleague suggests plan control-plane addressing and reconnect managed gateways correctly. Based on the recorded symptoms, which corrective step should have priority?

  1. Connect the new management host on the intended network
  2. Disconnect the retired source before activating its replacement
  3. Plan control-plane addressing and reconnect managed gateways correctly
  4. Use Upgrade with Migration for new-server clean-install cutover

Explanation

Correct Answer

B:

Controlled cutover prevents conflicting management authorities. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The new server needs appropriate network connectivity to manage gateways, yet that applies to bring the replacement management server online after import rather than the observed issue.

C:

A migration needs correct management connectivity and trusted identity, but the current evidence calls for a different R82 operation.

D:

Migration exports management state and imports to a separate target; this does not resolve the observed condition.

Question 476

An additional powered-on appliance has the proper Sync connection and is visible under Pending Gateways in Gaia Portal. The current ElasticXL site needs more capacity, not a separate recovery site. An alternate diagnosis concerns the requirement to monitor admission and automatic cloning progress, for which a colleague suggests use insights or show cluster info provision live. Based on the recorded symptoms, which corrective step should have priority?

  1. Use insights or show cluster info provision live
  2. Remove it then add as a pending member to the target site
  3. Use Gaia Portal Cluster Management > Pending Gateways
  4. Use Gaia Portal Cluster Management Actions > Delete

Explanation

Correct Answer

C:

Pending Gateways is the supported member-admission workflow. This directly addresses the documented incident evidence.

Incorrect Answers

A:

ElasticXL provides member onboarding and clone status commands, but the current evidence calls for a different R82 operation.

B:

The documented workflow removes and re-adds a node to the chosen site; this does not resolve the observed condition.

D:

Cluster Management supports member removal, yet that applies to remove a member from an ElasticXL cluster rather than the observed issue.

Question 477

Management High Availability shows Sync Error for a standby database. Network connectivity and SIC between the two R82 management peers both pass, and exactly one member is Active. No pending SmartConsole edits remain. The operator must distinguish this from a separate requirement to restore a standby server after repairing network communication. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Initiate a manual synchronization between management peers
  2. Open the Management High Availability status in SmartConsole
  3. Confirm peer state and re-synchronize management databases
  4. Use Management High Availability database synchronization

Explanation

Correct Answer

A:

A manual sync is the documented response to Sync Error. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Management HA status reports peer role and synchronization health, yet that applies to review whether the management HA partner is synchronized rather than the observed issue.

C:

Management synchronization restores the appropriate structured peer state, but the current evidence calls for a different R82 operation.

D:

Management HA synchronizes the management databases and revisions; this does not resolve the observed condition.

Question 478

A SaaS provider publishes rapidly changing network ranges and Check Point maintains its current addresses in a cloud feed. A policy written with last quarter’s manually entered host IPs frequently drops legitimate connections. An alternate diagnosis concerns the requirement to allow feed updates through the Check Point cloud, for which a colleague suggests verify Management Server and Gateway reachability to Check Point cloud. Based on the recorded symptoms, which corrective step should have priority?

  1. Import the Updatable Object into a Destination column
  2. Verify Management Server and Gateway reachability to Check Point cloud
  3. Let the Updatable Object update on the Security Gateway
  4. Use an Updatable Object based on the service address feed

Explanation

Correct Answer

D:

Updatable Objects follow changing externally published addresses. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Access Control can match an Updatable Object as a destination, yet that applies to control cloud-service destinations in the Access Control policy rather than the observed issue.

B:

The relevant management and gateway components need cloud access, but the current evidence calls for a different R82 operation.

C:

An Updatable Object membership refresh does not require policy reinstall; this does not resolve the observed condition.

Question 479

The partner IPsec log for an R82 site-to-site tunnel records NO_PROPOSAL_CHOSEN during IKE negotiation after its administrator removed an old encryption suite. Both endpoints can exchange UDP 500, and peer credentials have been checked. A preliminary suggestion is to use IKEv2 for IPv6 VPN negotiations. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Configure matching pre-shared keys on both VPN peers
  2. Use IKEv2 for IPv6 VPN negotiations
  3. Compare phase settings, algorithms, and proposals on both peers
  4. Verify phase-two traffic selectors and matching policy rules

Explanation

Correct Answer

C:

Both IKE/IPsec peers must agree on compatible proposals. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Both sides need consistent configured IKE authentication secrets, yet that applies to authenticate a third-party IPsec peer with a shared secret rather than the observed issue.

B:

R82 IPv6 VPN uses IKEv2, but the current evidence calls for a different R82 operation.

D:

Data associations still need matching selectors and permitted traffic; this does not resolve the observed condition.

Question 480

Compliance reviewers ask why a managed gateway’s security rulebase fails specific Check Point best practices. Analysts have only log searches and cannot see configuration-grade rule findings. A proposed change would be to review Regulatory Compliance requirements and scores, which addresses the different requirement to inspect a policy against a regulatory framework. Which action instead addresses the observed incident?

  1. Review Regulatory Compliance requirements and scores
  2. Activate the Compliance Software Blade
  3. Open Logs & Events and select Views
  4. Generate a Compliance Blade report in the Reports view

Explanation

Correct Answer

B:

Compliance evaluates Check Point security best practices. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Compliance maps checks to selected regulatory requirements, but the current evidence calls for a different R82 operation.

C:

Views present monitored security information and visual queries; this does not resolve the observed condition.

D:

Compliance reporting supports a PDF output, yet that applies to prepare a PDF summary of compliance findings rather than the observed issue.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests