McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 46

Question 450

A broad Manual NAT rule sits above a more specific source-and-destination rule in the NAT policy. A connection qualifies for both, and logs show the broad translation being used. The desired per-customer translation exists but is never selected. A proposed change would be to use the Translated Services column in a Manual NAT rule, which addresses the different requirement to translate the destination service port for one published server. Which action instead addresses the observed incident?

  1. Place the intended matching rule first in the NAT rule order
  2. Use the Translated Services column in a Manual NAT rule
  3. Use an Updatable Object based on the service address feed
  4. Create a Manual NAT rule matching the specified address pair

Explanation

Correct Answer

A:

Only the first matching Manual NAT rule is enforced. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Manual NAT can translate services as well as addresses, but the current evidence calls for a different R82 operation.

C:

Updatable Objects follow changing externally published addresses; this does not resolve the observed condition.

D:

Manual NAT can match both original source and destination, yet that applies to restrict address translation to a specific source and destination rather than the observed issue.

Question 451

An R82 gateway maintains a permanent site-to-site tunnel to a third-party IPsec firewall. Traffic becomes idle and Check Point tunnel-test packets receive no useful response. The peer supports standards-based IKE keepalives. The controls that address the separate requirement to mark just one tunnel in a larger community as permanent are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use periodic tunnel-test responses to determine up status
  2. Enable permanent-tunnel tracking or alert behavior
  3. Use interoperable IKE Dead Peer Detection for supported permanent-tunnel monitoring
  4. Select the particular tunnel in community Tunnel Management

Explanation

Correct Answer

C:

R82 Dead Peer Detection supports third-party gateways, while proprietary tunnel-test packets require Check Point peers. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Test packet responses are the basis for permanent tunnel status, yet that applies to verify a permanent VPN tunnel remains reachable rather than the observed issue.

B:

Permanent tunnel monitoring can issue logs and alerts on failure; this does not resolve the observed condition.

D:

Tunnel Management permits specific individual permanent tunnels, but the current evidence calls for a different R82 operation.

Question 452

The SOC needs to inspect real-time Check Point logs from an analyst workstation where installing SmartConsole is prohibited. HTTPS access to the relevant management or event server is allowed. The operator must distinguish this from a separate requirement to access a predefined analytical security view. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Open Logs & Events and select Reports
  2. Access SmartView on the appropriate server web endpoint
  3. Open Logs & Events and select Views
  4. Build a customizable view in SmartView or Logs & Events

Explanation

Correct Answer

B:

SmartView exposes views and reports through its web application. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Reports summarize monitored activity for presentation; this does not resolve the observed condition.

C:

Views present monitored security information and visual queries, but the current evidence calls for a different R82 operation.

D:

SmartView supports graphical views and log queries, yet that applies to create a custom graphic for log search results rather than the observed issue.

Question 453

Before deploying a major R82 gateway upgrade, the change manager needs a recoverable system state and a verified path back if health checks fail. The gateway has enough storage for the documented supported snapshot. An alternate diagnosis concerns the requirement to decide where CDT runs when upgrading remote gateways, for which a colleague suggests run the Central Deployment Tool from the Management Server. Based on the recorded symptoms, which corrective step should have priority?

  1. Capture a supported backup/snapshot and upgrade plan
  2. Choose a documented management Upgrade or Migration method
  3. Run the Central Deployment Tool from the Management Server
  4. Back up the appliance and confirm the target package is supported

Explanation

Correct Answer

A:

Recovery artifacts make a failed upgrade safer to reverse. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Management databases use their supported upgrade and migration workflows; this does not resolve the observed condition.

C:

CDT uses the Management Server to deploy to gateways, but the current evidence calls for a different R82 operation.

D:

Backup and compatibility checks reduce recoverability risk, yet that applies to prepare the gateway before a scheduled release upgrade rather than the observed issue.

Question 454

An R82 replacement management server was installed and can access the network. The export archive copied successfully, but a license audit shows it was issued for the old appliance address. The import runbook requires license readiness first. A preliminary suggestion is to export the management database before upgrading and re-import afterward. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Export the management database before upgrading and re-import afterward
  2. Invoke migrate_server import for the exported archive
  3. Expect the import procedure to restart Check Point services
  4. Verify license state on the destination with cplic print

Explanation

Correct Answer

D:

License validation is part of the documented import preparation. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Advanced Upgrade preserves state through export and import, but the current evidence calls for a different R82 operation.

B:

The migration import restores the exported management database; this does not resolve the observed condition.

C:

The documented import invokes stop/start for Check Point services, yet that applies to plan for service lifecycle when performing migration import rather than the observed issue.

Question 455

A cloned R82 ElasticXL member finishes image transfer but repeatedly transitions from Down to Up during admission. The team needs the messages describing cluster state changes, not the file-copy log. A proposed change would be to review supported platform and cluster membership limits, which addresses the different requirement to check membership count and topology before scaling. Which action instead addresses the observed incident?

  1. Run show cluster info provision in Gaia gClish
  2. Inspect /var/log/lightshot.log on the relevant member
  3. Inspect the $FWDIR/log/blade_config state messages
  4. Review supported platform and cluster membership limits

Explanation

Correct Answer

C:

blade_config records important cluster up/down messages. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The provision command displays detected members and states, yet that applies to inspect discovery and provisioning state from CLI rather than the observed issue.

B:

The lightshot log documents SMO snapshot and image cloning; this does not resolve the observed condition.

D:

ElasticXL has documented platform and membership constraints, but the current evidence calls for a different R82 operation.

Question 456

The failed management HA link has been repaired and SIC tests succeed again. The standby peer was isolated for several published policy revisions; SmartConsole now shows it is behind but still Standby. A proposed change would be to test Secure Internal Communication between the HA peers, which addresses the different requirement to investigate failed management peer authentication. Which action instead addresses the observed incident?

  1. Use Management High Availability database synchronization
  2. Confirm peer state and re-synchronize management databases
  3. Open the Management High Availability status in SmartConsole
  4. Test Secure Internal Communication between the HA peers

Explanation

Correct Answer

B:

Management synchronization restores the appropriate structured peer state. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Management HA synchronizes the management databases and revisions, yet that applies to keep policy and network-object definitions consistent across peers rather than the observed issue.

C:

Management HA status reports peer role and synchronization health; this does not resolve the observed condition.

D:

SIC testing helps isolate authentication or trusted-channel issues, but the current evidence calls for a different R82 operation.

Question 457

The remote R82 gateways must contact a management server at one stable translated address, while the management host retains its original private IP. The managed network device performing translation is already identified. A proposed change would be to create translated objects, NAT rule, and matching Access Control rule, which addresses the different requirement to publish a server using a manually translated address. Which action instead addresses the observed incident?

  1. Create translated objects, NAT rule, and matching Access Control rule
  2. Match Original Services and set corresponding Translated Services
  3. Configure required Proxy ARP entries for the translated address
  4. Configure the Management Server object NAT settings for Static translation

Explanation

Correct Answer

D:

Management-object NAT defines the externally reachable translated address. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Manual NAT workflows also require valid translated objects and access, but the current evidence calls for a different R82 operation.

B:

Manual NAT can restrict rules by service and translated port; this does not resolve the observed condition.

C:

Manual NAT deployments require Proxy ARP where applicable, yet that applies to advertise a Manual NAT translated IP at the local network boundary rather than the observed issue.

Question 458

A Check Point-managed branch tunnel stays idle for hours, so operators do not notice it fails until new application traffic arrives. The organization needs continuous gateway-to-gateway tunnel health and prompt alerting. An alternate diagnosis concerns the requirement to select different egress based on VPN service requirements, for which a colleague suggests review Service Based Link Selection policies. Based on the recorded symptoms, which corrective step should have priority?

  1. Configure the appropriate Permanent Tunnel setting
  2. Enable permanent-tunnel tracking or alert behavior
  3. Use interoperable IKE Dead Peer Detection for supported permanent-tunnel monitoring
  4. Review Service Based Link Selection policies

Explanation

Correct Answer

A:

Permanent tunnels support configured monitoring between Check Point gateways. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Permanent tunnel monitoring can issue logs and alerts on failure, yet that applies to track failure of a monitored permanent VPN tunnel rather than the observed issue.

C:

R82 Dead Peer Detection supports third-party gateways, while proprietary tunnel-test packets require Check Point peers; this does not resolve the observed condition.

D:

Service Based Link Selection addresses bandwidth usage by service, but the current evidence calls for a different R82 operation.

Question 459

An access alert triggers during routine approved overnight maintenance, but the compliance team only wants alerts for unauthorized out-of-hours login activity. The event should use an explicit schedule instead of continually changing thresholds. An alternate diagnosis concerns the requirement to notify an operator for a notable event, for which a colleague suggests configure the relevant SmartEvent alert reaction. Based on the recorded symptoms, which corrective step should have priority?

  1. Configure a SmartEvent threshold of log count and seconds
  2. Configure a Time Object for the event definition
  3. Configure the relevant SmartEvent alert reaction
  4. Deploy and configure SmartEvent event correlation

Explanation

Correct Answer

B:

SmartEvent can use time objects for working-hours events. This directly addresses the documented incident evidence.

Incorrect Answers

A:

SmartEvent threshold combines frequency and interval, yet that applies to create an alert after repeated matching logs in a time window rather than the observed issue.

C:

Event alerts are implemented in SmartEvent reactions, but the current evidence calls for a different R82 operation.

D:

SmartEvent correlates log patterns into events; this does not resolve the observed condition.

Question 460

A maintenance request mandates a named Jumbo Hotfix package because the currently advertised latest package has not passed internal regression testing. The gateway is supported for Central Deployment and reachable. A preliminary suggestion is to search for the named Hotfix/Jumbo package in deployment UI. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Select gateways in SmartConsole and Install Hotfix/Jumbo
  2. Use SmartConsole Central Deployment where supported
  3. Choose Install a Specific Hotfix/Jumbo and enter the filename
  4. Search for the named Hotfix/Jumbo package in deployment UI

Explanation

Correct Answer

C:

Specific package selection targets the intended hotfix. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Central Deployment distributes hotfixes to selected gateway targets, yet that applies to apply a hotfix to a set of Security Gateways rather than the observed issue.

B:

Central Deployment is the documented gateway best practice; this does not resolve the observed condition.

D:

The specific-package lookup matches the approved advisory, but the current evidence calls for a different R82 operation.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests