Question 300
During a scheduled deployment at a utility operations center in Phoenix, a separate security tenant needs BGP sessions without touching another tenant's routing table. The team is verifying its effect on control-system reporting. Which acceptance outcome addresses the precise requirement?
Explanation
Correct Answer
At a utility operations center in Phoenix, this verifies the specific vsys virtual routers requirement rather than merely recording an intended configuration: The BGP peer forms and learned prefixes remain limited to the tenant routing instance. The associated implementation is: configure BGP in its authorized routing instance and define neighbor/prefix filters.
Incorrect Answers
That observation measures inter-vsys routing and policy after this other intervention: Remove the unauthorized cross-VSYS path and preserve only the documented connection. Its result is: Routing and traffic logs show no unauthorized cross-tenant communication after commit. The requested vsys virtual routers change is Configure BGP in its authorized routing instance and define neighbor/prefix filters, which must demonstrate: The BGP peer forms and learned prefixes remain limited to the tenant routing instance. The offered evidence does not validate the specified control.
The offered observation would confirm the separate intervention: Assign their Layer 3 interfaces to suitable isolated virtual routers and control any planned cross-VSYS connectivity. It measures: Each virtual router contains only its intended subnets and no unauthorized route path crosses tenant boundaries. The current vsys virtual routers configuration is Configure BGP in its authorized routing instance and define neighbor/prefix filters, and must demonstrate: The BGP peer forms and learned prefixes remain limited to the tenant routing instance. The two acceptance checks are not interchangeable even though they share a feature area.
The offered observation would confirm the separate intervention: Associate the interface with the correct virtual router and confirm next-hop resolution. It measures: The installed route uses the intended outgoing interface and test packets reach the selected peer. The current vsys virtual routers configuration is Configure BGP in its authorized routing instance and define neighbor/prefix filters, and must demonstrate: The BGP peer forms and learned prefixes remain limited to the tenant routing instance. The two acceptance checks are not interchangeable even though they share a feature area.