Question 160
During a scheduled deployment at a mining operations site in Salt Lake City, a routing policy needs shared prefix lists and route maps for BGP and OSPF on the advanced engine. The team is verifying its effect on sensor telemetry. Which acceptance outcome addresses the precise requirement?
Explanation
Correct Answer
At a mining operations site in Salt Lake City, this verifies the specific advanced routing engine requirement rather than merely recording an intended configuration: Accepted route lists match the configured filters and disallowed routes remain absent. The associated implementation is: create supported routing filters/profiles and bind them to the appropriate logical router protocol.
Incorrect Answers
The offered observation would confirm the separate intervention: Assign the interfaces to the appropriate advanced logical router rather than mixing router models. It measures: The interface appears in the actual active logical routing instance and forwarding follows its routes. The current advanced routing engine configuration is Create supported routing filters/profiles and bind them to the appropriate logical router protocol, and must demonstrate: Accepted route lists match the configured filters and disallowed routes remain absent. The two acceptance checks are not interchangeable even though they share a feature area.
That observation measures route monitoring after this other intervention: Set appropriate monitoring and route preference for the primary/backup routes. Its result is: The primary wins during normal service and the backup installs when primary monitoring fails. The requested advanced routing engine change is Create supported routing filters/profiles and bind them to the appropriate logical router protocol, which must demonstrate: Accepted route lists match the configured filters and disallowed routes remain absent. The offered evidence does not validate the specified control.
The offered observation would confirm the separate intervention: Enable and configure the supported Advanced Routing Engine with a logical router. It measures: The intended interfaces and prefixes appear under the logical router and advanced route policies take effect. The current advanced routing engine configuration is Create supported routing filters/profiles and bind them to the appropriate logical router protocol, and must demonstrate: Accepted route lists match the configured filters and disallowed routes remain absent. The two acceptance checks are not interchangeable even though they share a feature area.