McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 39

Question 380

At Harborstone Rail Logistics, while reviewing route policies, the data center fabric team observes: A BGP session is Established but the expected underlay prefix is not learned. What ongoing operational safeguard directly addresses this root issue?

  1. Test announced routes and applied policy alongside session state
  2. Validate symmetric reachability across fabric-to-external boundaries
  3. Capture selected next hops before and after routing policy deployment
  4. Review fast-detection timers against real network jitter and loss

Explanation

Correct Answer

A:

At Harborstone Rail Logistics, while reviewing route policies, the preventive control is: Test announced routes and applied policy alongside session state. It catches the same mechanism (The prefix was not originated or an export policy prevented its advertisement) before the symptom recurs. An appropriate regression observation is: The remote peer receives the expected prefix with the intended next hop.

Incorrect Answers

B:

At Harborstone Rail Logistics, while reviewing route policies, this option proposes: Validate symmetric reachability across fabric-to-external boundaries. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The fabric edge lacks a route toward the external destination or the return subnet. The evidence in the current case requires a different result: The remote peer receives the expected prefix with the intended next hop.

C:

At Harborstone Rail Logistics, while reviewing route policies, this option proposes: Capture selected next hops before and after routing policy deployment. Using that approach would investigate Traffic follows an unexpected spine after a route-policy update instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The prefix was not originated or an export policy prevented its advertisement.

D:

At Harborstone Rail Logistics, while reviewing route policies, this option proposes: Review fast-detection timers against real network jitter and loss. The alternative focuses on BFD detection values are too aggressive for the observed link characteristics, not on the stated defect. For this scenario the expected acceptance result would be: The remote peer receives the expected prefix with the intended next hop.

Question 381

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, the data center fabric team observes: A static default route appears in configuration but never forwards traffic. Which supported remediation most directly addresses the stated failure?

  1. Inspect rejected path attributes and the configured import policy before making a scoped correction
  2. Correct the next-hop-group membership and adjacency reachability
  3. Restore physical interface health and then review peer and route state
  4. Verify peer addressing, routing and permitted control-plane connectivity

Explanation

Correct Answer

B:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, for Riverton Municipal Networks, the applicable change is: Correct the next-hop-group membership and adjacency reachability. The causal issue is: The referenced next-hop group has no reachable selected member. A successful validation would show: The default route resolves to an active next hop and controlled traffic reaches the gateway.

Incorrect Answers

A:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, this option proposes: Inspect rejected path attributes and the configured import policy before making a scoped correction. Using that approach would investigate A leaf receives an underlay route but it is rejected from the active routing table instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The referenced next-hop group has no reachable selected member.

C:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, this option proposes: Restore physical interface health and then review peer and route state. This option assumes the other problem (A routing incident is blamed on BGP even though an interface has no operational carrier) is present. The case instead describes A static default route appears in configuration but never forwards traffic, for which the causal issue is The referenced next-hop group has no reachable selected member.

D:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, this option proposes: Verify peer addressing, routing and permitted control-plane connectivity. It tests a different symptom: Two fabric peers have BGP configured but the session stays Idle with no TCP connection. For the observed case, the relevant distinction is The referenced next-hop group has no reachable selected member, with verification: The default route resolves to an active next hop and controlled traffic reaches the gateway.

Question 382

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, the data center fabric team observes: A static default route appears in configuration but never forwards traffic. Which evidence directly validates the intended repair?

  1. The default route resolves to an active next hop and controlled traffic reaches the gateway
  2. Both peers reach Established using the approved AS assignment
  3. A policy test exports required fabric routes but denies representative tenant prefixes
  4. The session stays stable during acceptable variations and detects actual link failure within objective

Explanation

Correct Answer

A:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, this result is the relevant closure evidence: The default route resolves to an active next hop and controlled traffic reaches the gateway. It checks the effect of: Correct the next-hop-group membership and adjacency reachability. The underlying issue was: The referenced next-hop group has no reachable selected member.

Incorrect Answers

B:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, this option proposes: Both peers reach Established using the approved AS assignment. This option assumes the other problem (A BGP neighbor remains stuck due to a mismatched local or peer autonomous system) is present. The case instead describes A static default route appears in configuration but never forwards traffic, for which the causal issue is The referenced next-hop group has no reachable selected member.

C:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, this option proposes: A policy test exports required fabric routes but denies representative tenant prefixes. It tests a different symptom: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. For the observed case, the relevant distinction is The referenced next-hop group has no reachable selected member, with verification: The default route resolves to an active next hop and controlled traffic reaches the gateway.

D:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, this option proposes: The session stays stable during acceptable variations and detects actual link failure within objective. The option describes a different failure mode: A leaf's BGP session resets repeatedly after a minor interface disturbance. It would address BFD detection values are too aggressive for the observed link characteristics, but here the case reports A static default route appears in configuration but never forwards traffic. The current required evidence is: The default route resolves to an active next hop and controlled traffic reaches the gateway.

Question 383

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, the data center fabric team observes: A static default route appears in configuration but never forwards traffic. Which underlying mechanism best accounts for this symptom?

  1. BFD detection values are too aggressive for the observed link characteristics
  2. The session's source address does not match the remote peer definition and route reachability
  3. The referenced next-hop group has no reachable selected member
  4. A prefix match was broader than the approved route-exchange scope

Explanation

Correct Answer

C:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, the evidence points to: The referenced next-hop group has no reachable selected member. The follow-up test (The default route resolves to an active next hop and controlled traffic reaches the gateway) distinguishes this mechanism from a separate fabric fault.

Incorrect Answers

A:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, this option proposes: BFD detection values are too aggressive for the observed link characteristics. This option assumes the other problem (A leaf's BGP session resets repeatedly after a minor interface disturbance) is present. The case instead describes A static default route appears in configuration but never forwards traffic, for which the causal issue is The referenced next-hop group has no reachable selected member.

B:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, this option proposes: The session's source address does not match the remote peer definition and route reachability. It tests a different symptom: An eBGP leaf peering configuration uses an incorrect update source for loopback peering. For the observed case, the relevant distinction is The referenced next-hop group has no reachable selected member, with verification: The default route resolves to an active next hop and controlled traffic reaches the gateway.

D:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, this option proposes: A prefix match was broader than the approved route-exchange scope. That choice would be more relevant when this different symptom occurs: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. The present scenario instead points to: The referenced next-hop group has no reachable selected member. The correct resolution has its own verification outcome: The default route resolves to an active next hop and controlled traffic reaches the gateway.

Question 384

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, the data center fabric team observes: A static default route appears in configuration but never forwards traffic. Which review gate should be added to prevent the same error?

  1. Check data-plane path programming whenever peer counts change
  2. Review BGP source-interface assumptions for multihop peering
  3. Validate symmetric reachability across fabric-to-external boundaries
  4. Monitor next-hop resolution, not merely static-route configuration presence

Explanation

Correct Answer

D:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, use this repeatable control: Monitor next-hop resolution, not merely static-route configuration presence. Its scope is the problem (The referenced next-hop group has no reachable selected member), not an unrelated network maintenance procedure.

Incorrect Answers

A:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, this option proposes: Check data-plane path programming whenever peer counts change. It tests a different symptom: A network engineer assumes multiple BGP peers automatically imply load-balanced traffic. For the observed case, the relevant distinction is The referenced next-hop group has no reachable selected member, with verification: The default route resolves to an active next hop and controlled traffic reaches the gateway.

B:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, this option proposes: Review BGP source-interface assumptions for multihop peering. The option describes a different failure mode: An eBGP leaf peering configuration uses an incorrect update source for loopback peering. It would address The session's source address does not match the remote peer definition and route reachability, but here the case reports A static default route appears in configuration but never forwards traffic. The current required evidence is: The default route resolves to an active next hop and controlled traffic reaches the gateway.

C:

At Riverton Municipal Networks, while restoring an underlay BGP adjacency, this option proposes: Validate symmetric reachability across fabric-to-external boundaries. That choice would be more relevant when this different symptom occurs: A new server subnet cannot reach external routed services although its gateway replies. The present scenario instead points to: The referenced next-hop group has no reachable selected member. The correct resolution has its own verification outcome: The default route resolves to an active next hop and controlled traffic reaches the gateway.

Question 385

At Windmere Energy Services, while commissioning a routed spine uplink, the data center fabric team observes: A network engineer assumes multiple BGP peers automatically imply load-balanced traffic. What configuration or operational change should the engineer prioritize?

  1. Restrict route origination and export to the required network-service prefixes
  2. Check route origination and the neighbor export policy for the missing prefix
  3. Inspect installed next-hop groups and ECMP eligibility rather than counting neighbors
  4. Correct the local and peer AS values to match the fabric plan

Explanation

Correct Answer

C:

At Windmere Energy Services, while commissioning a routed spine uplink, choose this remediation because it targets the mechanism: The active forwarding table has only one selected path despite several control-plane peers. The supported corrective action is: Inspect installed next-hop groups and ECMP eligibility rather than counting neighbors. Verification requires: The forwarding state lists the intended next-hop set for the test destination.

Incorrect Answers

A:

A leaf exports its connected management subnet into tenant-visible fabric routing. Here, the active forwarding table has only one selected path despite several control-plane peers.

B:

At Windmere Energy Services, while commissioning a routed spine uplink, this option proposes: Check route origination and the neighbor export policy for the missing prefix. This is a valid category of fabric maintenance for another scenario (A BGP session is Established but the expected underlay prefix is not learned), not the targeted action for Windmere Energy Services. The distinction is the actual cause: The active forwarding table has only one selected path despite several control-plane peers.

D:

At Windmere Energy Services, while commissioning a routed spine uplink, this option proposes: Correct the local and peer AS values to match the fabric plan. Using that approach would investigate A BGP neighbor remains stuck due to a mismatched local or peer autonomous system instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The active forwarding table has only one selected path despite several control-plane peers.

Question 386

At Windmere Energy Services, while commissioning a routed spine uplink, the data center fabric team observes: A network engineer assumes multiple BGP peers automatically imply load-balanced traffic. What test result proves the affected fabric function now works?

  1. A policy test exports required fabric routes but denies representative tenant prefixes
  2. The forwarding state lists the intended next-hop set for the test destination
  3. Tenant route tables exclude the management network while underlay reachability remains
  4. An end-to-end test succeeds with routes present in both forward and return directions

Explanation

Correct Answer

B:

At Windmere Energy Services, while commissioning a routed spine uplink, for Windmere Energy Services, accept the repair only after this observation: The forwarding state lists the intended next-hop set for the test destination. The test distinguishes real recovery from a superficial status change.

Incorrect Answers

A:

At Windmere Energy Services, while commissioning a routed spine uplink, this option proposes: A policy test exports required fabric routes but denies representative tenant prefixes. This is a valid category of fabric maintenance for another scenario (A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes), not the targeted action for Windmere Energy Services. The distinction is the actual cause: The active forwarding table has only one selected path despite several control-plane peers.

C:

At Windmere Energy Services, while commissioning a routed spine uplink, this option proposes: Tenant route tables exclude the management network while underlay reachability remains. Using that approach would investigate A leaf exports its connected management subnet into tenant-visible fabric routing instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The active forwarding table has only one selected path despite several control-plane peers.

D:

At Windmere Energy Services, while commissioning a routed spine uplink, this option proposes: An end-to-end test succeeds with routes present in both forward and return directions. The alternative focuses on The fabric edge lacks a route toward the external destination or the return subnet, not on the stated defect. For this scenario the expected acceptance result would be: The forwarding state lists the intended next-hop set for the test destination.

Question 387

At Windmere Energy Services, while commissioning a routed spine uplink, the data center fabric team observes: A network engineer assumes multiple BGP peers automatically imply load-balanced traffic. What specific misconfiguration or design error is most likely?

  1. IPv6 family activation or transport address configuration is missing on that adjacency
  2. The active forwarding table has only one selected path despite several control-plane peers
  3. The fabric edge lacks a route toward the external destination or the return subnet
  4. An unintended discard next-hop or blackhole action was selected

Explanation

Correct Answer

B:

At Windmere Energy Services, while commissioning a routed spine uplink, the specific mechanism is: The active forwarding table has only one selected path despite several control-plane peers. It explains the reported state: A network engineer assumes multiple BGP peers automatically imply load-balanced traffic. The targeted corrective action is: Inspect installed next-hop groups and ECMP eligibility rather than counting neighbors.

Incorrect Answers

A:

At Windmere Energy Services, while commissioning a routed spine uplink, this option proposes: IPv6 family activation or transport address configuration is missing on that adjacency. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: IPv6 family activation or transport address configuration is missing on that adjacency. The evidence in the current case requires a different result: The forwarding state lists the intended next-hop set for the test destination.

C:

At Windmere Energy Services, while commissioning a routed spine uplink, this option proposes: The fabric edge lacks a route toward the external destination or the return subnet. The alternative focuses on The fabric edge lacks a route toward the external destination or the return subnet, not on the stated defect. For this scenario the expected acceptance result would be: The forwarding state lists the intended next-hop set for the test destination.

D:

At Windmere Energy Services, while commissioning a routed spine uplink, this option proposes: An unintended discard next-hop or blackhole action was selected. This option assumes the other problem (A static route sends production traffic into a blackhole after an emergency change) is present. The case instead describes A network engineer assumes multiple BGP peers automatically imply load-balanced traffic, for which the causal issue is The active forwarding table has only one selected path despite several control-plane peers.

Question 388

At Windmere Energy Services, while commissioning a routed spine uplink, the data center fabric team observes: A network engineer assumes multiple BGP peers automatically imply load-balanced traffic. What repeatable acceptance check would reduce recurrence?

  1. Use positive and negative prefix fixtures when revising route policy
  2. Validate AFI/SAFI and IPv6 routes independently from IPv4
  3. Check data-plane path programming whenever peer counts change
  4. Test announced routes and applied policy alongside session state

Explanation

Correct Answer

C:

At Windmere Energy Services, while commissioning a routed spine uplink, for Windmere Energy Services, include the safeguard: Check data-plane path programming whenever peer counts change. It reduces repeat risk from the original mechanism and complements a validation of: The forwarding state lists the intended next-hop set for the test destination.

Incorrect Answers

A:

At Windmere Energy Services, while commissioning a routed spine uplink, this option proposes: Use positive and negative prefix fixtures when revising route policy. Using that approach would investigate A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The active forwarding table has only one selected path despite several control-plane peers.

B:

At Windmere Energy Services, while commissioning a routed spine uplink, this option proposes: Validate AFI/SAFI and IPv6 routes independently from IPv4. The alternative focuses on IPv6 family activation or transport address configuration is missing on that adjacency, not on the stated defect. For this scenario the expected acceptance result would be: The forwarding state lists the intended next-hop set for the test destination.

D:

At Windmere Energy Services, while commissioning a routed spine uplink, this option proposes: Test announced routes and applied policy alongside session state. It tests a different symptom: A BGP session is Established but the expected underlay prefix is not learned. For the observed case, the relevant distinction is The active forwarding table has only one selected path despite several control-plane peers, with verification: The forwarding state lists the intended next-hop set for the test destination.

Question 389

At Brightwater Digital Commerce, while commissioning a routed spine uplink, the data center fabric team observes: A routed subinterface can ping its neighbor but the wrong routing table is being populated. Which action resolves the identified fabric-management issue?

  1. Commit and verify persistent underlay routing configuration prior to controlled reboot
  2. Move the route or BGP neighbor context to the intended IP-VRF network instance
  3. Tune approved BFD timing based on measured path stability and redundancy needs
  4. Configure the required IPv6 address family and approved prefix advertisements

Explanation

Correct Answer

B:

At Brightwater Digital Commerce, while commissioning a routed spine uplink, for Brightwater Digital Commerce, the applicable change is: Move the route or BGP neighbor context to the intended IP-VRF network instance. The causal issue is: The BGP or static route belongs to an incorrect network instance. A successful validation would show: The route appears in the target tenant or underlay table and not elsewhere.

Incorrect Answers

A:

At Brightwater Digital Commerce, while commissioning a routed spine uplink, this option proposes: Commit and verify persistent underlay routing configuration prior to controlled reboot. This option assumes the other problem (An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit) is present. The case instead describes A routed subinterface can ping its neighbor but the wrong routing table is being populated, for which the causal issue is The BGP or static route belongs to an incorrect network instance.

C:

BFD detection values are too aggressive for the observed link characteristics, but here the case reports A routed subinterface can ping its neighbor but the wrong routing table is being populated. Here, the BGP or static route belongs to an incorrect network instance.

D:

An underlay peer advertises only IPv4 while an expected IPv6 reachability test fails. Here, the BGP or static route belongs to an incorrect network instance.

Question 390

At Brightwater Digital Commerce, while commissioning a routed spine uplink, the data center fabric team observes: A routed subinterface can ping its neighbor but the wrong routing table is being populated. Which result would establish that the original defect has been corrected?

  1. The forwarding state lists the intended next-hop set for the test destination
  2. The route appears in the target tenant or underlay table and not elsewhere
  3. The test destination is reached while the blackhole action is absent from the route
  4. A controlled single-link failure leaves remote VTEP loopbacks reachable

Explanation

Correct Answer

B:

At Brightwater Digital Commerce, while commissioning a routed spine uplink, for Brightwater Digital Commerce, accept the repair only after this observation: The route appears in the target tenant or underlay table and not elsewhere. The test distinguishes real recovery from a superficial status change.

Incorrect Answers

A:

At Brightwater Digital Commerce, while commissioning a routed spine uplink, this option proposes: The forwarding state lists the intended next-hop set for the test destination. It tests a different symptom: A network engineer assumes multiple BGP peers automatically imply load-balanced traffic. For the observed case, the relevant distinction is The BGP or static route belongs to an incorrect network instance, with verification: The route appears in the target tenant or underlay table and not elsewhere.

C:

At Brightwater Digital Commerce, while commissioning a routed spine uplink, this option proposes: The test destination is reached while the blackhole action is absent from the route. That choice would be more relevant when this different symptom occurs: A static route sends production traffic into a blackhole after an emergency change. The present scenario instead points to: The BGP or static route belongs to an incorrect network instance. The correct resolution has its own verification outcome: The route appears in the target tenant or underlay table and not elsewhere.

D:

At Brightwater Digital Commerce, while commissioning a routed spine uplink, this option proposes: A controlled single-link failure leaves remote VTEP loopbacks reachable. This is a valid category of fabric maintenance for another scenario (Link failure takes down tenant services even though another physical underlay path is up), not the targeted action for Brightwater Digital Commerce. The distinction is the actual cause: The BGP or static route belongs to an incorrect network instance.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests