McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 37

Question 360

At Pinebrook Digital Commerce, while restoring an underlay BGP adjacency, the data center fabric team observes: A new server subnet cannot reach external routed services although its gateway replies. Which recurring validation best prevents this failure mode?

  1. Measure equal-cost route installation after underlay changes
  2. Use positive and negative prefix fixtures when revising route policy
  3. Validate symmetric reachability across fabric-to-external boundaries
  4. Capture selected next hops before and after routing policy deployment

Explanation

Correct Answer

C:

At Pinebrook Digital Commerce, while restoring an underlay BGP adjacency, for Pinebrook Digital Commerce, include the safeguard: Validate symmetric reachability across fabric-to-external boundaries. It reduces repeat risk from the original mechanism and complements a validation of: An end-to-end test succeeds with routes present in both forward and return directions.

Incorrect Answers

A:

At Pinebrook Digital Commerce, while restoring an underlay BGP adjacency, this option proposes: Measure equal-cost route installation after underlay changes. That choice would be more relevant when this different symptom occurs: All spine-to-leaf BGP sessions exist but one leaf uses a single path instead of ECMP. The present scenario instead points to: The fabric edge lacks a route toward the external destination or the return subnet. The correct resolution has its own verification outcome: An end-to-end test succeeds with routes present in both forward and return directions.

B:

At Pinebrook Digital Commerce, while restoring an underlay BGP adjacency, this option proposes: Use positive and negative prefix fixtures when revising route policy. This is a valid category of fabric maintenance for another scenario (A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes), not the targeted action for Pinebrook Digital Commerce. The distinction is the actual cause: The fabric edge lacks a route toward the external destination or the return subnet.

D:

At Pinebrook Digital Commerce, while restoring an underlay BGP adjacency, this option proposes: Capture selected next hops before and after routing policy deployment. Using that approach would investigate Traffic follows an unexpected spine after a route-policy update instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The fabric edge lacks a route toward the external destination or the return subnet.

Question 361

At Stonegate Health Systems, while commissioning a routed spine uplink, the data center fabric team observes: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. Which targeted adjustment best corrects this behavior?

  1. Tune approved BFD timing based on measured path stability and redundancy needs
  2. Restrict the route policy to explicitly approved loopback or underlay prefixes
  3. Correct the tagged subinterface binding and validate neighbor-layer connectivity before BGP changes
  4. Verify peer addressing, routing and permitted control-plane connectivity

Explanation

Correct Answer

B:

At Stonegate Health Systems, while commissioning a routed spine uplink, for Stonegate Health Systems, the applicable change is: Restrict the route policy to explicitly approved loopback or underlay prefixes. The causal issue is: A prefix match was broader than the approved route-exchange scope. A successful validation would show: A policy test exports required fabric routes but denies representative tenant prefixes.

Incorrect Answers

A:

At Stonegate Health Systems, while commissioning a routed spine uplink, this option proposes: Tune approved BFD timing based on measured path stability and redundancy needs. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: BFD detection values are too aggressive for the observed link characteristics. The evidence in the current case requires a different result: A policy test exports required fabric routes but denies representative tenant prefixes.

C:

At Stonegate Health Systems, while commissioning a routed spine uplink, this option proposes: Correct the tagged subinterface binding and validate neighbor-layer connectivity before BGP changes. The alternative focuses on The control-plane frames do not reach the intended tagged subinterface, not on the stated defect. For this scenario the expected acceptance result would be: A policy test exports required fabric routes but denies representative tenant prefixes.

D:

At Stonegate Health Systems, while commissioning a routed spine uplink, this option proposes: Verify peer addressing, routing and permitted control-plane connectivity. This option assumes the other problem (Two fabric peers have BGP configured but the session stays Idle with no TCP connection) is present. The case instead describes A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes, for which the causal issue is A prefix match was broader than the approved route-exchange scope.

Question 362

At Stonegate Health Systems, while commissioning a routed spine uplink, the data center fabric team observes: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. What observation should be required before this case is closed?

  1. The failed path leaves the forwarding set while a healthy path remains selected
  2. The forwarding state lists the intended next-hop set for the test destination
  3. A policy test exports required fabric routes but denies representative tenant prefixes
  4. The interface is up and its expected control-plane session establishes

Explanation

Correct Answer

C:

At Stonegate Health Systems, while commissioning a routed spine uplink, the decisive validation is: A policy test exports required fabric routes but denies representative tenant prefixes. It verifies that the change (Restrict the route policy to explicitly approved loopback or underlay prefixes) resolved the mechanism: A prefix match was broader than the approved route-exchange scope.

Incorrect Answers

A:

At Stonegate Health Systems, while commissioning a routed spine uplink, this option proposes: The failed path leaves the forwarding set while a healthy path remains selected. Using that approach would investigate A route remains installed after its intended physical next hop fails instead. No evidence for that separate failure is supplied here; the reported case is consistent with: A prefix match was broader than the approved route-exchange scope.

B:

At Stonegate Health Systems, while commissioning a routed spine uplink, this option proposes: The forwarding state lists the intended next-hop set for the test destination. The alternative focuses on The active forwarding table has only one selected path despite several control-plane peers, not on the stated defect. For this scenario the expected acceptance result would be: A policy test exports required fabric routes but denies representative tenant prefixes.

D:

At Stonegate Health Systems, while commissioning a routed spine uplink, this option proposes: The interface is up and its expected control-plane session establishes. It tests a different symptom: A routing incident is blamed on BGP even though an interface has no operational carrier. For the observed case, the relevant distinction is A prefix match was broader than the approved route-exchange scope, with verification: A policy test exports required fabric routes but denies representative tenant prefixes.

Question 363

At Stonegate Health Systems, while commissioning a routed spine uplink, the data center fabric team observes: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. What causal finding should the investigation prioritize?

  1. A prefix match was broader than the approved route-exchange scope
  2. The path preference or BGP route attributes changed without validating selected forwarding paths
  3. The BGP or static route belongs to an incorrect network instance
  4. An import policy or preference calculation rejects the proposed route

Explanation

Correct Answer

A:

At Stonegate Health Systems, while commissioning a routed spine uplink, for Stonegate Health Systems, investigate this cause first: A prefix match was broader than the approved route-exchange scope. It is directly linked to the observed symptom rather than another service issue.

Incorrect Answers

B:

At Stonegate Health Systems, while commissioning a routed spine uplink, this option proposes: The path preference or BGP route attributes changed without validating selected forwarding paths. This option assumes the other problem (Traffic follows an unexpected spine after a route-policy update) is present. The case instead describes A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes, for which the causal issue is A prefix match was broader than the approved route-exchange scope.

C:

At Stonegate Health Systems, while commissioning a routed spine uplink, this option proposes: The BGP or static route belongs to an incorrect network instance. It tests a different symptom: A routed subinterface can ping its neighbor but the wrong routing table is being populated. For the observed case, the relevant distinction is A prefix match was broader than the approved route-exchange scope, with verification: A policy test exports required fabric routes but denies representative tenant prefixes.

D:

At Stonegate Health Systems, while commissioning a routed spine uplink, this option proposes: An import policy or preference calculation rejects the proposed route. The option describes a different failure mode: A leaf receives an underlay route but it is rejected from the active routing table. It would address An import policy or preference calculation rejects the proposed route, but here the case reports A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. The current required evidence is: A policy test exports required fabric routes but denies representative tenant prefixes.

Question 364

At Stonegate Health Systems, while commissioning a routed spine uplink, the data center fabric team observes: A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. What ongoing operational safeguard directly addresses this root issue?

  1. Monitor next-hop resolution, not merely static-route configuration presence
  2. Validate ASN topology and peer definitions when adding leaves
  3. Use positive and negative prefix fixtures when revising route policy
  4. Test BFD and BGP failure handling together in maintenance drills

Explanation

Correct Answer

C:

At Stonegate Health Systems, while commissioning a routed spine uplink, for Stonegate Health Systems, include the safeguard: Use positive and negative prefix fixtures when revising route policy. It reduces repeat risk from the original mechanism and complements a validation of: A policy test exports required fabric routes but denies representative tenant prefixes.

Incorrect Answers

A:

At Stonegate Health Systems, while commissioning a routed spine uplink, this option proposes: Monitor next-hop resolution, not merely static-route configuration presence. This option assumes the other problem (A static default route appears in configuration but never forwards traffic) is present. The case instead describes A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes, for which the causal issue is A prefix match was broader than the approved route-exchange scope.

B:

At Stonegate Health Systems, while commissioning a routed spine uplink, this option proposes: Validate ASN topology and peer definitions when adding leaves. It tests a different symptom: A BGP neighbor remains stuck due to a mismatched local or peer autonomous system. For the observed case, the relevant distinction is A prefix match was broader than the approved route-exchange scope, with verification: A policy test exports required fabric routes but denies representative tenant prefixes.

D:

At Stonegate Health Systems, while commissioning a routed spine uplink, this option proposes: Test BFD and BGP failure handling together in maintenance drills. That choice would be more relevant when this different symptom occurs: A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. The present scenario instead points to: A prefix match was broader than the approved route-exchange scope. The correct resolution has its own verification outcome: A policy test exports required fabric routes but denies representative tenant prefixes.

Question 365

At Southridge Rail Logistics, while reviewing route policies, the data center fabric team observes: A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. Which supported remediation most directly addresses the stated failure?

  1. Apply the correct IP prefix and next-hop-group to the static route
  2. Check peer BFD configuration and physical path before adjusting detection policy
  3. Remove the unintended discard action and install the approved reachable next-hop group
  4. Restrict route origination and export to the required network-service prefixes

Explanation

Correct Answer

B:

At Southridge Rail Logistics, while reviewing route policies, for Southridge Rail Logistics, the applicable change is: Check peer BFD configuration and physical path before adjusting detection policy. The causal issue is: BFD connectivity or session parameters are incompatible across the peer pair. A successful validation would show: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

Incorrect Answers

A:

The destination prefix length does not cover the intended address range, but here the case reports A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. Here, bFD connectivity or session parameters are incompatible across the peer pair.

C:

At Southridge Rail Logistics, while reviewing route policies, this option proposes: Remove the unintended discard action and install the approved reachable next-hop group. This is a valid category of fabric maintenance for another scenario (A static route sends production traffic into a blackhole after an emergency change), not the targeted action for Southridge Rail Logistics. The distinction is the actual cause: BFD connectivity or session parameters are incompatible across the peer pair.

D:

At Southridge Rail Logistics, while reviewing route policies, this option proposes: Restrict route origination and export to the required network-service prefixes. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The route export policy fails to distinguish infrastructure and tenant prefixes. The evidence in the current case requires a different result: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

Question 366

At Southridge Rail Logistics, while reviewing route policies, the data center fabric team observes: A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. Which evidence directly validates the intended repair?

  1. Representative addresses within the target subnet follow the expected route
  2. The remote route resolves to a usable forwarding next hop without fallback leakage
  3. The forwarding state lists the intended next-hop set for the test destination
  4. BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction

Explanation

Correct Answer

D:

At Southridge Rail Logistics, while reviewing route policies, bFD establishes and a controlled path failure triggers the intended rapid adjacency reaction. This is linked directly to the observed symptom (A BFD session shows Down while the BGP peer continues waiting for its normal hold timer) and cannot be replaced by an unrelated healthy dashboard.

Incorrect Answers

A:

At Southridge Rail Logistics, while reviewing route policies, this option proposes: Representative addresses within the target subnet follow the expected route. That choice would be more relevant when this different symptom occurs: An engineer configures a static route destination as a host when an entire subnet is needed. The present scenario instead points to: BFD connectivity or session parameters are incompatible across the peer pair. The correct resolution has its own verification outcome: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

B:

At Southridge Rail Logistics, while reviewing route policies, this option proposes: The remote route resolves to a usable forwarding next hop without fallback leakage. This is a valid category of fabric maintenance for another scenario (A neighbor's BGP Established state masks a missing remote gateway next hop), not the targeted action for Southridge Rail Logistics. The distinction is the actual cause: BFD connectivity or session parameters are incompatible across the peer pair.

C:

At Southridge Rail Logistics, while reviewing route policies, this option proposes: The forwarding state lists the intended next-hop set for the test destination. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The active forwarding table has only one selected path despite several control-plane peers. The evidence in the current case requires a different result: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

Question 367

At Southridge Rail Logistics, while reviewing route policies, the data center fabric team observes: A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. Which underlying mechanism best accounts for this symptom?

  1. An import policy or preference calculation rejects the proposed route
  2. The remaining path was omitted from routing adjacencies or next-hop eligibility
  3. A prefix match was broader than the approved route-exchange scope
  4. BFD connectivity or session parameters are incompatible across the peer pair

Explanation

Correct Answer

D:

At Southridge Rail Logistics, while reviewing route policies, bFD connectivity or session parameters are incompatible across the peer pair. That is the cause of the described failure, and a corrective check should demonstrate: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

Incorrect Answers

A:

At Southridge Rail Logistics, while reviewing route policies, this option proposes: An import policy or preference calculation rejects the proposed route. This is a valid category of fabric maintenance for another scenario (A leaf receives an underlay route but it is rejected from the active routing table), not the targeted action for Southridge Rail Logistics. The distinction is the actual cause: BFD connectivity or session parameters are incompatible across the peer pair.

B:

At Southridge Rail Logistics, while reviewing route policies, this option proposes: The remaining path was omitted from routing adjacencies or next-hop eligibility. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The remaining path was omitted from routing adjacencies or next-hop eligibility. The evidence in the current case requires a different result: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

C:

At Southridge Rail Logistics, while reviewing route policies, this option proposes: A prefix match was broader than the approved route-exchange scope. Using that approach would investigate A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes instead. No evidence for that separate failure is supplied here; the reported case is consistent with: BFD connectivity or session parameters are incompatible across the peer pair.

Question 368

At Southridge Rail Logistics, while reviewing route policies, the data center fabric team observes: A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. Which review gate should be added to prevent the same error?

  1. Check encapsulation and interface state before route-policy adjustments
  2. Monitor unresolved next hops separately from BGP state
  3. Test BFD and BGP failure handling together in maintenance drills
  4. Start routing incident triage with local interface and next-hop checks

Explanation

Correct Answer

C:

At Southridge Rail Logistics, while reviewing route policies, for Southridge Rail Logistics, include the safeguard: Test BFD and BGP failure handling together in maintenance drills. It reduces repeat risk from the original mechanism and complements a validation of: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

Incorrect Answers

A:

At Southridge Rail Logistics, while reviewing route policies, this option proposes: Check encapsulation and interface state before route-policy adjustments. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The control-plane frames do not reach the intended tagged subinterface. The evidence in the current case requires a different result: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction.

B:

At Southridge Rail Logistics, while reviewing route policies, this option proposes: Monitor unresolved next hops separately from BGP state. Using that approach would investigate A neighbor's BGP Established state masks a missing remote gateway next hop instead. No evidence for that separate failure is supplied here; the reported case is consistent with: BFD connectivity or session parameters are incompatible across the peer pair.

D:

At Southridge Rail Logistics, while reviewing route policies, this option proposes: Start routing incident triage with local interface and next-hop checks. This option assumes the other problem (A routing incident is blamed on BGP even though an interface has no operational carrier) is present. The case instead describes A BFD session shows Down while the BGP peer continues waiting for its normal hold timer, for which the causal issue is BFD connectivity or session parameters are incompatible across the peer pair.

Question 369

At Harborstone Health Systems, while investigating next-hop reachability, the data center fabric team observes: Two fabric peers have BGP configured but the session stays Idle with no TCP connection. What configuration or operational change should the engineer prioritize?

  1. Verify peer addressing, routing and permitted control-plane connectivity
  2. Review BGP path attributes and ECMP configuration to permit only equivalent eligible paths
  3. Tune approved BFD timing based on measured path stability and redundancy needs
  4. Restrict route origination and export to the required network-service prefixes

Explanation

Correct Answer

A:

At Harborstone Health Systems, while investigating next-hop reachability, verify peer addressing, routing and permitted control-plane connectivity. This addresses the specific failure mechanism (The peer address is unreachable or TCP 179 is blocked by the underlay policy) rather than treating only the visible alarm. The required acceptance evidence is: The BGP TCP session establishes and the peer reaches the expected state.

Incorrect Answers

B:

At Harborstone Health Systems, while investigating next-hop reachability, this option proposes: Review BGP path attributes and ECMP configuration to permit only equivalent eligible paths. This option assumes the other problem (All spine-to-leaf BGP sessions exist but one leaf uses a single path instead of ECMP) is present. The case instead describes Two fabric peers have BGP configured but the session stays Idle with no TCP connection, for which the causal issue is The peer address is unreachable or TCP 179 is blocked by the underlay policy.

C:

At Harborstone Health Systems, while investigating next-hop reachability, this option proposes: Tune approved BFD timing based on measured path stability and redundancy needs. It tests a different symptom: A leaf's BGP session resets repeatedly after a minor interface disturbance. For the observed case, the relevant distinction is The peer address is unreachable or TCP 179 is blocked by the underlay policy, with verification: The BGP TCP session establishes and the peer reaches the expected state.

D:

At Harborstone Health Systems, while investigating next-hop reachability, this option proposes: Restrict route origination and export to the required network-service prefixes. The option describes a different failure mode: A leaf exports its connected management subnet into tenant-visible fabric routing. It would address The route export policy fails to distinguish infrastructure and tenant prefixes, but here the case reports Two fabric peers have BGP configured but the session stays Idle with no TCP connection. The current required evidence is: The BGP TCP session establishes and the peer reaches the expected state.

Question 370

At Harborstone Health Systems, while investigating next-hop reachability, the data center fabric team observes: Two fabric peers have BGP configured but the session stays Idle with no TCP connection. What test result proves the affected fabric function now works?

  1. The forwarding state lists the intended next-hop set for the test destination
  2. The BGP TCP session establishes and the peer reaches the expected state
  3. The default route resolves to an active next hop and controlled traffic reaches the gateway
  4. Representative addresses within the target subnet follow the expected route

Explanation

Correct Answer

B:

At Harborstone Health Systems, while investigating next-hop reachability, for Harborstone Health Systems, accept the repair only after this observation: The BGP TCP session establishes and the peer reaches the expected state. The test distinguishes real recovery from a superficial status change.

Incorrect Answers

A:

At Harborstone Health Systems, while investigating next-hop reachability, this option proposes: The forwarding state lists the intended next-hop set for the test destination. This option assumes the other problem (A network engineer assumes multiple BGP peers automatically imply load-balanced traffic) is present. The case instead describes Two fabric peers have BGP configured but the session stays Idle with no TCP connection, for which the causal issue is The peer address is unreachable or TCP 179 is blocked by the underlay policy.

C:

At Harborstone Health Systems, while investigating next-hop reachability, this option proposes: The default route resolves to an active next hop and controlled traffic reaches the gateway. The option describes a different failure mode: A static default route appears in configuration but never forwards traffic. It would address The referenced next-hop group has no reachable selected member, but here the case reports Two fabric peers have BGP configured but the session stays Idle with no TCP connection. The current required evidence is: The BGP TCP session establishes and the peer reaches the expected state.

D:

At Harborstone Health Systems, while investigating next-hop reachability, this option proposes: Representative addresses within the target subnet follow the expected route. That choice would be more relevant when this different symptom occurs: An engineer configures a static route destination as a host when an entire subnet is needed. The present scenario instead points to: The peer address is unreachable or TCP 179 is blocked by the underlay policy. The correct resolution has its own verification outcome: The BGP TCP session establishes and the peer reaches the expected state.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests