McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 41

Question 400

At Evercrest Health Systems, while planning a link-failure test, the data center fabric team observes: A BGP session is Established but the expected underlay prefix is not learned. Which review gate should be added to prevent the same error?

  1. Test announced routes and applied policy alongside session state
  2. Validate symmetric reachability across fabric-to-external boundaries
  3. Monitor unresolved next hops separately from BGP state
  4. Capture selected next hops before and after routing policy deployment

Explanation

Correct Answer

A:

At Evercrest Health Systems, while planning a link-failure test, the preventive control is: Test announced routes and applied policy alongside session state. It catches the same mechanism (The prefix was not originated or an export policy prevented its advertisement) before the symptom recurs. An appropriate regression observation is: The remote peer receives the expected prefix with the intended next hop.

Incorrect Answers

B:

At Evercrest Health Systems, while planning a link-failure test, this option proposes: Validate symmetric reachability across fabric-to-external boundaries. Using that approach would investigate A new server subnet cannot reach external routed services although its gateway replies instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The prefix was not originated or an export policy prevented its advertisement.

C:

At Evercrest Health Systems, while planning a link-failure test, this option proposes: Monitor unresolved next hops separately from BGP state. The alternative focuses on The received route's next hop cannot be resolved in the relevant routing instance, not on the stated defect. For this scenario the expected acceptance result would be: The remote peer receives the expected prefix with the intended next hop.

D:

At Evercrest Health Systems, while planning a link-failure test, this option proposes: Capture selected next hops before and after routing policy deployment. This option assumes the other problem (Traffic follows an unexpected spine after a route-policy update) is present. The case instead describes A BGP session is Established but the expected underlay prefix is not learned, for which the causal issue is The prefix was not originated or an export policy prevented its advertisement.

Question 401

At Westbrook Health Systems, while verifying multiple equal-cost paths, the data center fabric team observes: An eBGP leaf peering configuration uses an incorrect update source for loopback peering. What configuration or operational change should the engineer prioritize?

  1. Commit and verify persistent underlay routing configuration prior to controlled reboot
  2. Align the BGP source address, peer target and required routing path
  3. Apply the correct IP prefix and next-hop-group to the static route
  4. Inspect installed next-hop groups and ECMP eligibility rather than counting neighbors

Explanation

Correct Answer

B:

At Westbrook Health Systems, while verifying multiple equal-cost paths, for Westbrook Health Systems, the applicable change is: Align the BGP source address, peer target and required routing path. The causal issue is: The session's source address does not match the remote peer definition and route reachability. A successful validation would show: The remote peer sees the expected source and the session reaches Established.

Incorrect Answers

A:

At Westbrook Health Systems, while verifying multiple equal-cost paths, this option proposes: Commit and verify persistent underlay routing configuration prior to controlled reboot. The alternative focuses on The required routing configuration existed only in uncommitted candidate state, not on the stated defect. For this scenario the expected acceptance result would be: The remote peer sees the expected source and the session reaches Established.

C:

At Westbrook Health Systems, while verifying multiple equal-cost paths, this option proposes: Apply the correct IP prefix and next-hop-group to the static route. It tests a different symptom: An engineer configures a static route destination as a host when an entire subnet is needed. For the observed case, the relevant distinction is The session's source address does not match the remote peer definition and route reachability, with verification: The remote peer sees the expected source and the session reaches Established.

D:

The active forwarding table has only one selected path despite several control-plane peers, but here the case reports An eBGP leaf peering configuration uses an incorrect update source for loopback peering. Here, the session's source address does not match the remote peer definition and route reachability.

Question 402

At Westbrook Health Systems, while verifying multiple equal-cost paths, the data center fabric team observes: An eBGP leaf peering configuration uses an incorrect update source for loopback peering. What test result proves the affected fabric function now works?

  1. The remote peer sees the expected source and the session reaches Established
  2. The approved route enters the intended route table without leaking unwanted prefixes
  3. The forwarding table matches the approved spine preference and still has required backup paths
  4. An end-to-end test succeeds with routes present in both forward and return directions

Explanation

Correct Answer

A:

At Westbrook Health Systems, while verifying multiple equal-cost paths, this result is the relevant closure evidence: The remote peer sees the expected source and the session reaches Established. It checks the effect of: Align the BGP source address, peer target and required routing path. The underlying issue was: The session's source address does not match the remote peer definition and route reachability.

Incorrect Answers

B:

At Westbrook Health Systems, while verifying multiple equal-cost paths, this option proposes: The approved route enters the intended route table without leaking unwanted prefixes. It tests a different symptom: A leaf receives an underlay route but it is rejected from the active routing table. For the observed case, the relevant distinction is The session's source address does not match the remote peer definition and route reachability, with verification: The remote peer sees the expected source and the session reaches Established.

C:

At Westbrook Health Systems, while verifying multiple equal-cost paths, this option proposes: The forwarding table matches the approved spine preference and still has required backup paths. The option describes a different failure mode: Traffic follows an unexpected spine after a route-policy update. It would address The path preference or BGP route attributes changed without validating selected forwarding paths, but here the case reports An eBGP leaf peering configuration uses an incorrect update source for loopback peering. The current required evidence is: The remote peer sees the expected source and the session reaches Established.

D:

At Westbrook Health Systems, while verifying multiple equal-cost paths, this option proposes: An end-to-end test succeeds with routes present in both forward and return directions. That choice would be more relevant when this different symptom occurs: A new server subnet cannot reach external routed services although its gateway replies. The present scenario instead points to: The session's source address does not match the remote peer definition and route reachability. The correct resolution has its own verification outcome: The remote peer sees the expected source and the session reaches Established.

Question 403

At Westbrook Health Systems, while verifying multiple equal-cost paths, the data center fabric team observes: An eBGP leaf peering configuration uses an incorrect update source for loopback peering. What specific misconfiguration or design error is most likely?

  1. The required routing configuration existed only in uncommitted candidate state
  2. The active forwarding table has only one selected path despite several control-plane peers
  3. The referenced next-hop group has no reachable selected member
  4. The session's source address does not match the remote peer definition and route reachability

Explanation

Correct Answer

D:

At Westbrook Health Systems, while verifying multiple equal-cost paths, the session's source address does not match the remote peer definition and route reachability. That is the cause of the described failure, and a corrective check should demonstrate: The remote peer sees the expected source and the session reaches Established.

Incorrect Answers

A:

At Westbrook Health Systems, while verifying multiple equal-cost paths, this option proposes: The required routing configuration existed only in uncommitted candidate state. It tests a different symptom: An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit. For the observed case, the relevant distinction is The session's source address does not match the remote peer definition and route reachability, with verification: The remote peer sees the expected source and the session reaches Established.

B:

At Westbrook Health Systems, while verifying multiple equal-cost paths, this option proposes: The active forwarding table has only one selected path despite several control-plane peers. The option describes a different failure mode: A network engineer assumes multiple BGP peers automatically imply load-balanced traffic. It would address The active forwarding table has only one selected path despite several control-plane peers, but here the case reports An eBGP leaf peering configuration uses an incorrect update source for loopback peering. The current required evidence is: The remote peer sees the expected source and the session reaches Established.

C:

At Westbrook Health Systems, while verifying multiple equal-cost paths, this option proposes: The referenced next-hop group has no reachable selected member. That choice would be more relevant when this different symptom occurs: A static default route appears in configuration but never forwards traffic. The present scenario instead points to: The session's source address does not match the remote peer definition and route reachability. The correct resolution has its own verification outcome: The remote peer sees the expected source and the session reaches Established.

Question 404

At Westbrook Health Systems, while verifying multiple equal-cost paths, the data center fabric team observes: An eBGP leaf peering configuration uses an incorrect update source for loopback peering. What repeatable acceptance check would reduce recurrence?

  1. Include post-reboot persistence in routing change acceptance
  2. Validate symmetric reachability across fabric-to-external boundaries
  3. Review BGP source-interface assumptions for multihop peering
  4. Use positive and negative prefix fixtures when revising route policy

Explanation

Correct Answer

C:

At Westbrook Health Systems, while verifying multiple equal-cost paths, for Westbrook Health Systems, include the safeguard: Review BGP source-interface assumptions for multihop peering. It reduces repeat risk from the original mechanism and complements a validation of: The remote peer sees the expected source and the session reaches Established.

Incorrect Answers

A:

At Westbrook Health Systems, while verifying multiple equal-cost paths, this option proposes: Include post-reboot persistence in routing change acceptance. The option describes a different failure mode: An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit. It would address The required routing configuration existed only in uncommitted candidate state, but here the case reports An eBGP leaf peering configuration uses an incorrect update source for loopback peering. The current required evidence is: The remote peer sees the expected source and the session reaches Established.

B:

At Westbrook Health Systems, while verifying multiple equal-cost paths, this option proposes: Validate symmetric reachability across fabric-to-external boundaries. That choice would be more relevant when this different symptom occurs: A new server subnet cannot reach external routed services although its gateway replies. The present scenario instead points to: The session's source address does not match the remote peer definition and route reachability. The correct resolution has its own verification outcome: The remote peer sees the expected source and the session reaches Established.

D:

At Westbrook Health Systems, while verifying multiple equal-cost paths, this option proposes: Use positive and negative prefix fixtures when revising route policy. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: A prefix match was broader than the approved route-exchange scope. The evidence in the current case requires a different result: The remote peer sees the expected source and the session reaches Established.

Question 405

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, the data center fabric team observes: A network team reuses private ASNs but forgets the peer policy needed at a domain boundary. Which action resolves the identified fabric-management issue?

  1. Tune approved BFD timing based on measured path stability and redundancy needs
  2. Check supported peer and AS-path handling against the documented autonomous system plan
  3. Restrict the route policy to explicitly approved loopback or underlay prefixes
  4. Move the route or BGP neighbor context to the intended IP-VRF network instance

Explanation

Correct Answer

B:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, for Suncrest Rail Logistics, the applicable change is: Check supported peer and AS-path handling against the documented autonomous system plan. The causal issue is: The external BGP adjacency's accepted AS-path behavior was not reviewed for the topology. A successful validation would show: Approved routes traverse the intended boundary without accepting unrelated AS paths.

Incorrect Answers

A:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, this option proposes: Tune approved BFD timing based on measured path stability and redundancy needs. This is a valid category of fabric maintenance for another scenario (A leaf's BGP session resets repeatedly after a minor interface disturbance), not the targeted action for Suncrest Rail Logistics. The distinction is the actual cause: The external BGP adjacency's accepted AS-path behavior was not reviewed for the topology.

C:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, this option proposes: Restrict the route policy to explicitly approved loopback or underlay prefixes. Using that approach would investigate A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The external BGP adjacency's accepted AS-path behavior was not reviewed for the topology.

D:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, this option proposes: Move the route or BGP neighbor context to the intended IP-VRF network instance. The alternative focuses on The BGP or static route belongs to an incorrect network instance, not on the stated defect. For this scenario the expected acceptance result would be: Approved routes traverse the intended boundary without accepting unrelated AS paths.

Question 406

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, the data center fabric team observes: A network team reuses private ASNs but forgets the peer policy needed at a domain boundary. Which result would establish that the original defect has been corrected?

  1. The approved route enters the intended route table without leaking unwanted prefixes
  2. The session stays stable during acceptable variations and detects actual link failure within objective
  3. Approved routes traverse the intended boundary without accepting unrelated AS paths
  4. The remote route resolves to a usable forwarding next hop without fallback leakage

Explanation

Correct Answer

C:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, the decisive validation is: Approved routes traverse the intended boundary without accepting unrelated AS paths. It verifies that the change (Check supported peer and AS-path handling against the documented autonomous system plan) resolved the mechanism: The external BGP adjacency's accepted AS-path behavior was not reviewed for the topology.

Incorrect Answers

A:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, this option proposes: The approved route enters the intended route table without leaking unwanted prefixes. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: An import policy or preference calculation rejects the proposed route. The evidence in the current case requires a different result: Approved routes traverse the intended boundary without accepting unrelated AS paths.

B:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, this option proposes: The session stays stable during acceptable variations and detects actual link failure within objective. Using that approach would investigate A leaf's BGP session resets repeatedly after a minor interface disturbance instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The external BGP adjacency's accepted AS-path behavior was not reviewed for the topology.

D:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, this option proposes: The remote route resolves to a usable forwarding next hop without fallback leakage. This option assumes the other problem (A neighbor's BGP Established state masks a missing remote gateway next hop) is present. The case instead describes A network team reuses private ASNs but forgets the peer policy needed at a domain boundary, for which the causal issue is The external BGP adjacency's accepted AS-path behavior was not reviewed for the topology.

Question 407

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, the data center fabric team observes: A network team reuses private ASNs but forgets the peer policy needed at a domain boundary. Which root cause fits the reported state?

  1. The active forwarding table has only one selected path despite several control-plane peers
  2. A prefix match was broader than the approved route-exchange scope
  3. An import policy or preference calculation rejects the proposed route
  4. The external BGP adjacency's accepted AS-path behavior was not reviewed for the topology

Explanation

Correct Answer

D:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, the external BGP adjacency's accepted AS-path behavior was not reviewed for the topology. That is the cause of the described failure, and a corrective check should demonstrate: Approved routes traverse the intended boundary without accepting unrelated AS paths.

Incorrect Answers

A:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, this option proposes: The active forwarding table has only one selected path despite several control-plane peers. Using that approach would investigate A network engineer assumes multiple BGP peers automatically imply load-balanced traffic instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The external BGP adjacency's accepted AS-path behavior was not reviewed for the topology.

B:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, this option proposes: A prefix match was broader than the approved route-exchange scope. The alternative focuses on A prefix match was broader than the approved route-exchange scope, not on the stated defect. For this scenario the expected acceptance result would be: Approved routes traverse the intended boundary without accepting unrelated AS paths.

C:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, this option proposes: An import policy or preference calculation rejects the proposed route. This option assumes the other problem (A leaf receives an underlay route but it is rejected from the active routing table) is present. The case instead describes A network team reuses private ASNs but forgets the peer policy needed at a domain boundary, for which the causal issue is The external BGP adjacency's accepted AS-path behavior was not reviewed for the topology.

Question 408

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, the data center fabric team observes: A network team reuses private ASNs but forgets the peer policy needed at a domain boundary. Which recurring validation best prevents this failure mode?

  1. Exercise next-hop failure against all critical static routes
  2. Include discard-route inspection before promoting static changes
  3. Review ASN and AS-path policy when merging fabrics
  4. Test BFD and BGP failure handling together in maintenance drills

Explanation

Correct Answer

C:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, for Suncrest Rail Logistics, include the safeguard: Review ASN and AS-path policy when merging fabrics. It reduces repeat risk from the original mechanism and complements a validation of: Approved routes traverse the intended boundary without accepting unrelated AS paths.

Incorrect Answers

A:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, this option proposes: Exercise next-hop failure against all critical static routes. The alternative focuses on The static next hop is not being withdrawn or tracked through a supported reachability mechanism, not on the stated defect. For this scenario the expected acceptance result would be: Approved routes traverse the intended boundary without accepting unrelated AS paths.

B:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, this option proposes: Include discard-route inspection before promoting static changes. This option assumes the other problem (A static route sends production traffic into a blackhole after an emergency change) is present. The case instead describes A network team reuses private ASNs but forgets the peer policy needed at a domain boundary, for which the causal issue is The external BGP adjacency's accepted AS-path behavior was not reviewed for the topology.

D:

At Suncrest Rail Logistics, while restoring an underlay BGP adjacency, this option proposes: Test BFD and BGP failure handling together in maintenance drills. The option describes a different failure mode: A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. It would address BFD connectivity or session parameters are incompatible across the peer pair, but here the case reports A network team reuses private ASNs but forgets the peer policy needed at a domain boundary. The current required evidence is: Approved routes traverse the intended boundary without accepting unrelated AS paths.

Question 409

At Oakline Municipal Networks, while commissioning a routed spine uplink, the data center fabric team observes: Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes. Which targeted adjustment best corrects this behavior?

  1. Restore the redundant underlay peer and route selection according to design
  2. Check peer BFD configuration and physical path before adjusting detection policy
  3. Apply the correct IP prefix and next-hop-group to the static route
  4. Correct the tagged subinterface binding and validate neighbor-layer connectivity before BGP changes

Explanation

Correct Answer

D:

At Oakline Municipal Networks, while commissioning a routed spine uplink, the targeted correction is: Correct the tagged subinterface binding and validate neighbor-layer connectivity before BGP changes. The reported symptom is explained by: The control-plane frames do not reach the intended tagged subinterface. Confirm the change by testing this outcome: The appropriate Layer 3 adjacency forms and exchanges required routes.

Incorrect Answers

A:

At Oakline Municipal Networks, while commissioning a routed spine uplink, this option proposes: Restore the redundant underlay peer and route selection according to design. It tests a different symptom: Link failure takes down tenant services even though another physical underlay path is up. For the observed case, the relevant distinction is The control-plane frames do not reach the intended tagged subinterface, with verification: The appropriate Layer 3 adjacency forms and exchanges required routes.

B:

At Oakline Municipal Networks, while commissioning a routed spine uplink, this option proposes: Check peer BFD configuration and physical path before adjusting detection policy. The option describes a different failure mode: A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. It would address BFD connectivity or session parameters are incompatible across the peer pair, but here the case reports Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes. The current required evidence is: The appropriate Layer 3 adjacency forms and exchanges required routes.

C:

At Oakline Municipal Networks, while commissioning a routed spine uplink, this option proposes: Apply the correct IP prefix and next-hop-group to the static route. That choice would be more relevant when this different symptom occurs: An engineer configures a static route destination as a host when an entire subnet is needed. The present scenario instead points to: The control-plane frames do not reach the intended tagged subinterface. The correct resolution has its own verification outcome: The appropriate Layer 3 adjacency forms and exchanges required routes.

Question 410

At Oakline Municipal Networks, while commissioning a routed spine uplink, the data center fabric team observes: Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes. What observation should be required before this case is closed?

  1. The default route resolves to an active next hop and controlled traffic reaches the gateway
  2. The session stays stable during acceptable variations and detects actual link failure within objective
  3. The appropriate Layer 3 adjacency forms and exchanges required routes
  4. A controlled single-link failure leaves remote VTEP loopbacks reachable

Explanation

Correct Answer

C:

At Oakline Municipal Networks, while commissioning a routed spine uplink, the decisive validation is: The appropriate Layer 3 adjacency forms and exchanges required routes. It verifies that the change (Correct the tagged subinterface binding and validate neighbor-layer connectivity before BGP changes) resolved the mechanism: The control-plane frames do not reach the intended tagged subinterface.

Incorrect Answers

A:

The referenced next-hop group has no reachable selected member, but here the case reports Underlay BGP sessions appear stable but a wrong VLAN tag prevents one adjacency from exchanging routes. Here, the control-plane frames do not reach the intended tagged subinterface.

B:

A leaf's BGP session resets repeatedly after a minor interface disturbance. Here, the control-plane frames do not reach the intended tagged subinterface.

D:

At Oakline Municipal Networks, while commissioning a routed spine uplink, this option proposes: A controlled single-link failure leaves remote VTEP loopbacks reachable. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The remaining path was omitted from routing adjacencies or next-hop eligibility. The evidence in the current case requires a different result: The appropriate Layer 3 adjacency forms and exchanges required routes.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests