McAfee-Secured Website

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

100% Network Appliance NS0-165 Guaranteed Success With Testking Training Materials

Get Real NS0-165 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 52

Question 510

The storage reliability team at Silver Cove Payments are responsible for settlement data volumes and secure backups. Their assessment shows: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. The team reports that the correction is complete. Which observation BEST proves the stated problem is resolved?

  1. A controlled site-failure simulation maintains or restores service within defined RPO and RTO.
  2. The design documents which node or site failures each mechanism covers and proves the selected recovery path.
  3. An application transaction passes after failover and recorded outage duration meets the agreed target.
  4. A representative client mounts the recovered file service through an approved network route after failover.

Explanation

Correct Answer

D:

A representative client mounts the recovered file service through an approved network route after failover. The observation verifies that the chosen action (Include SVM and client access reconfiguration in the end-to-end recovery runbook) has corrected the initiating failure (A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records). This is directly measurable for Silver Cove Payments's settlement data volumes and secure backups rather than merely reporting task completion.

Incorrect Answers

A:

A controlled site-failure simulation maintains or restores service within defined RPO and RTO. This is a valid test for another condition (A mission-critical application requires near-zero interruption after a site outage but the plan provides only asynchronous once-daily SnapMirror updates) after a different correction (Evaluate a supported synchronous or SnapMirror active sync design appropriate to host and platform constraints). It does not establish the necessary result for Silver Cove Payments's settlement data volumes and secure backups: A representative client mounts the recovered file service through an approved network route after failover.

B:

The design documents which node or site failures each mechanism covers and proves the selected recovery path. This is a valid test for another condition (A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions) after a different correction (Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements). It does not establish the necessary result for Silver Cove Payments's settlement data volumes and secure backups: A representative client mounts the recovered file service through an approved network route after failover.

C:

An application transaction passes after failover and recorded outage duration meets the agreed target. This is a valid test for another condition (A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover) after a different correction (Define application-level integrity and transaction probes as continuity acceptance criteria). It does not establish the necessary result for Silver Cove Payments's settlement data volumes and secure backups: A representative client mounts the recovered file service through an approved network route after failover.

Question 511

At Blue Haven Media, the production environment supports large collaborative media project volumes under a documented recovery-time objective. Investigators find: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. Which administrative action BEST addresses the specific problem?

  1. Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements.
  2. Evaluate a supported synchronous or SnapMirror active sync design appropriate to host and platform constraints.
  3. Define application-level integrity and transaction probes as continuity acceptance criteria.
  4. Include SVM and client access reconfiguration in the end-to-end recovery runbook.

Explanation

Correct Answer

D:

Include SVM and client access reconfiguration in the end-to-end recovery runbook. This action addresses the specific failure: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. For Blue Haven Media's large collaborative media project volumes, a successful implementation should produce the following evidence: A representative client mounts the recovered file service through an approved network route after failover.

Incorrect Answers

A:

Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements. That approach targets a different ONTAP condition: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. At Blue Haven Media, for large collaborative media project volumes, the actual failure is: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. That alternative by itself would not prove the needed outcome: A representative client mounts the recovered file service through an approved network route after failover.

B:

Evaluate a supported synchronous or SnapMirror active sync design appropriate to host and platform constraints. That approach targets a different ONTAP condition: A mission-critical application requires near-zero interruption after a site outage but the plan provides only asynchronous once-daily SnapMirror updates. At Blue Haven Media, for large collaborative media project volumes, the actual failure is: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. That alternative by itself would not prove the needed outcome: A representative client mounts the recovered file service through an approved network route after failover.

C:

Define application-level integrity and transaction probes as continuity acceptance criteria. That approach targets a different ONTAP condition: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. At Blue Haven Media, for large collaborative media project volumes, the actual failure is: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. That alternative by itself would not prove the needed outcome: A representative client mounts the recovered file service through an approved network route after failover.

Question 512

At Blue Haven Media, the production environment supports large collaborative media project volumes under a documented recovery-time objective. Investigators find: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. The team reports that the correction is complete. Which observation BEST proves the stated problem is resolved?

  1. A controlled site-failure simulation maintains or restores service within defined RPO and RTO.
  2. The design documents which node or site failures each mechanism covers and proves the selected recovery path.
  3. A representative client mounts the recovered file service through an approved network route after failover.
  4. An application transaction passes after failover and recorded outage duration meets the agreed target.

Explanation

Correct Answer

C:

A representative client mounts the recovered file service through an approved network route after failover. The observation verifies that the chosen action (Include SVM and client access reconfiguration in the end-to-end recovery runbook) has corrected the initiating failure (A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records). This is directly measurable for Blue Haven Media's large collaborative media project volumes rather than merely reporting task completion.

Incorrect Answers

A:

A controlled site-failure simulation maintains or restores service within defined RPO and RTO. This is a valid test for another condition (A mission-critical application requires near-zero interruption after a site outage but the plan provides only asynchronous once-daily SnapMirror updates) after a different correction (Evaluate a supported synchronous or SnapMirror active sync design appropriate to host and platform constraints). It does not establish the necessary result for Blue Haven Media's large collaborative media project volumes: A representative client mounts the recovered file service through an approved network route after failover.

B:

The design documents which node or site failures each mechanism covers and proves the selected recovery path. This is a valid test for another condition (A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions) after a different correction (Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements). It does not establish the necessary result for Blue Haven Media's large collaborative media project volumes: A representative client mounts the recovered file service through an approved network route after failover.

D:

An application transaction passes after failover and recorded outage duration meets the agreed target. This is a valid test for another condition (A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover) after a different correction (Define application-level integrity and transaction probes as continuity acceptance criteria). It does not establish the necessary result for Blue Haven Media's large collaborative media project volumes: A representative client mounts the recovered file service through an approved network route after failover.

Question 513

A storage engineer reviewing Marshfield Bank's regulated transaction records and recovery volumes observes: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. Which administrative action BEST addresses the specific problem?

  1. Include SVM and client access reconfiguration in the end-to-end recovery runbook.
  2. Confirm replication state, latest recoverable checkpoint and approved failover sequence before promoting the destination.
  3. Define application-level integrity and transaction probes as continuity acceptance criteria.
  4. Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements.

Explanation

Correct Answer

C:

Define application-level integrity and transaction probes as continuity acceptance criteria. This action addresses the specific failure: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. For Marshfield Bank's regulated transaction records and recovery volumes, a successful implementation should produce the following evidence: An application transaction passes after failover and recorded outage duration meets the agreed target.

Incorrect Answers

A:

Include SVM and client access reconfiguration in the end-to-end recovery runbook. That approach targets a different ONTAP condition: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. At Marshfield Bank, for regulated transaction records and recovery volumes, the actual failure is: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. That alternative by itself would not prove the needed outcome: An application transaction passes after failover and recorded outage duration meets the agreed target.

B:

Confirm replication state, latest recoverable checkpoint and approved failover sequence before promoting the destination. That approach targets a different ONTAP condition: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. At Marshfield Bank, for regulated transaction records and recovery volumes, the actual failure is: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. That alternative by itself would not prove the needed outcome: An application transaction passes after failover and recorded outage duration meets the agreed target.

D:

Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements. That approach targets a different ONTAP condition: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. At Marshfield Bank, for regulated transaction records and recovery volumes, the actual failure is: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. That alternative by itself would not prove the needed outcome: An application transaction passes after failover and recorded outage duration meets the agreed target.

Question 514

A storage engineer reviewing Marshfield Bank's regulated transaction records and recovery volumes observes: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. The team reports that the correction is complete. Which observation BEST proves the stated problem is resolved?

  1. The design documents which node or site failures each mechanism covers and proves the selected recovery path.
  2. The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.
  3. An application transaction passes after failover and recorded outage duration meets the agreed target.
  4. A representative client mounts the recovered file service through an approved network route after failover.

Explanation

Correct Answer

C:

An application transaction passes after failover and recorded outage duration meets the agreed target. The observation verifies that the chosen action (Define application-level integrity and transaction probes as continuity acceptance criteria) has corrected the initiating failure (A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover). This is directly measurable for Marshfield Bank's regulated transaction records and recovery volumes rather than merely reporting task completion.

Incorrect Answers

A:

The design documents which node or site failures each mechanism covers and proves the selected recovery path. This is a valid test for another condition (A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions) after a different correction (Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements). It does not establish the necessary result for Marshfield Bank's regulated transaction records and recovery volumes: An application transaction passes after failover and recorded outage duration meets the agreed target.

B:

The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary. This is a valid test for another condition (An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current) after a different correction (Confirm replication state, latest recoverable checkpoint and approved failover sequence before promoting the destination). It does not establish the necessary result for Marshfield Bank's regulated transaction records and recovery volumes: An application transaction passes after failover and recorded outage duration meets the agreed target.

D:

A representative client mounts the recovered file service through an approved network route after failover. This is a valid test for another condition (A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records) after a different correction (Include SVM and client access reconfiguration in the end-to-end recovery runbook). It does not establish the necessary result for Marshfield Bank's regulated transaction records and recovery volumes: An application transaction passes after failover and recorded outage duration meets the agreed target.

Question 515

Northbridge University manages research file shares and database LUNs with separately managed development and production resources. A storage incident report states: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. Which administrative action BEST addresses the specific problem?

  1. Define application-level integrity and transaction probes as continuity acceptance criteria.
  2. Confirm replication state, latest recoverable checkpoint and approved failover sequence before promoting the destination.
  3. Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements.
  4. Include SVM and client access reconfiguration in the end-to-end recovery runbook.

Explanation

Correct Answer

A:

Define application-level integrity and transaction probes as continuity acceptance criteria. This action addresses the specific failure: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. For Northbridge University's research file shares and database LUNs, a successful implementation should produce the following evidence: An application transaction passes after failover and recorded outage duration meets the agreed target.

Incorrect Answers

B:

Confirm replication state, latest recoverable checkpoint and approved failover sequence before promoting the destination. That approach targets a different ONTAP condition: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. At Northbridge University, for research file shares and database LUNs, the actual failure is: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. That alternative by itself would not prove the needed outcome: An application transaction passes after failover and recorded outage duration meets the agreed target.

C:

Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements. That approach targets a different ONTAP condition: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. At Northbridge University, for research file shares and database LUNs, the actual failure is: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. That alternative by itself would not prove the needed outcome: An application transaction passes after failover and recorded outage duration meets the agreed target.

D:

Include SVM and client access reconfiguration in the end-to-end recovery runbook. That approach targets a different ONTAP condition: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. At Northbridge University, for research file shares and database LUNs, the actual failure is: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. That alternative by itself would not prove the needed outcome: An application transaction passes after failover and recorded outage duration meets the agreed target.

Question 516

Northbridge University manages research file shares and database LUNs with separately managed development and production resources. A storage incident report states: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. The team reports that the correction is complete. Which observation BEST proves the stated problem is resolved?

  1. An application transaction passes after failover and recorded outage duration meets the agreed target.
  2. The design documents which node or site failures each mechanism covers and proves the selected recovery path.
  3. A representative client mounts the recovered file service through an approved network route after failover.
  4. The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

Explanation

Correct Answer

A:

An application transaction passes after failover and recorded outage duration meets the agreed target. The observation verifies that the chosen action (Define application-level integrity and transaction probes as continuity acceptance criteria) has corrected the initiating failure (A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover). This is directly measurable for Northbridge University's research file shares and database LUNs rather than merely reporting task completion.

Incorrect Answers

B:

The design documents which node or site failures each mechanism covers and proves the selected recovery path. This is a valid test for another condition (A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions) after a different correction (Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements). It does not establish the necessary result for Northbridge University's research file shares and database LUNs: An application transaction passes after failover and recorded outage duration meets the agreed target.

C:

A representative client mounts the recovered file service through an approved network route after failover. This is a valid test for another condition (A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records) after a different correction (Include SVM and client access reconfiguration in the end-to-end recovery runbook). It does not establish the necessary result for Northbridge University's research file shares and database LUNs: An application transaction passes after failover and recorded outage duration meets the agreed target.

D:

The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary. This is a valid test for another condition (An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current) after a different correction (Confirm replication state, latest recoverable checkpoint and approved failover sequence before promoting the destination). It does not establish the necessary result for Northbridge University's research file shares and database LUNs: An application transaction passes after failover and recorded outage duration meets the agreed target.

Question 517

The data protection team at Linden Manufacturing are responsible for factory CAD datasets and ERP volumes. Their assessment shows: A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload. Which administrative action BEST addresses the specific problem?

  1. Verify destination resources, compatibility and protected workload capacity before permitting switchover.
  2. Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements.
  3. Include SVM and client access reconfiguration in the end-to-end recovery runbook.
  4. Validate the supported mediator placement and cluster connectivity for the chosen active sync design.

Explanation

Correct Answer

A:

Verify destination resources, compatibility and protected workload capacity before permitting switchover. This action addresses the specific failure: A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload. For Linden Manufacturing's factory CAD datasets and ERP volumes, a successful implementation should produce the following evidence: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

Incorrect Answers

B:

Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements. That approach targets a different ONTAP condition: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. At Linden Manufacturing, for factory CAD datasets and ERP volumes, the actual failure is: A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload. That alternative by itself would not prove the needed outcome: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

C:

Include SVM and client access reconfiguration in the end-to-end recovery runbook. That approach targets a different ONTAP condition: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. At Linden Manufacturing, for factory CAD datasets and ERP volumes, the actual failure is: A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload. That alternative by itself would not prove the needed outcome: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

D:

Validate the supported mediator placement and cluster connectivity for the chosen active sync design. That approach targets a different ONTAP condition: A two-site SAN continuity design omits the mediator or quorum mechanisms required by its selected SnapMirror active sync topology. At Linden Manufacturing, for factory CAD datasets and ERP volumes, the actual failure is: A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload. That alternative by itself would not prove the needed outcome: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

Question 518

The data protection team at Linden Manufacturing are responsible for factory CAD datasets and ERP volumes. Their assessment shows: A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload. The team reports that the correction is complete. Which observation BEST proves the stated problem is resolved?

  1. The target site accepts the planned workload and capacity telemetry stays within validated thresholds.
  2. A representative client mounts the recovered file service through an approved network route after failover.
  3. An inter-site link interruption follows the expected fenced failover behavior without split-brain writes.
  4. The design documents which node or site failures each mechanism covers and proves the selected recovery path.

Explanation

Correct Answer

A:

The target site accepts the planned workload and capacity telemetry stays within validated thresholds. The observation verifies that the chosen action (Verify destination resources, compatibility and protected workload capacity before permitting switchover) has corrected the initiating failure (A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload). This is directly measurable for Linden Manufacturing's factory CAD datasets and ERP volumes rather than merely reporting task completion.

Incorrect Answers

B:

A representative client mounts the recovered file service through an approved network route after failover. This is a valid test for another condition (A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records) after a different correction (Include SVM and client access reconfiguration in the end-to-end recovery runbook). It does not establish the necessary result for Linden Manufacturing's factory CAD datasets and ERP volumes: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

C:

An inter-site link interruption follows the expected fenced failover behavior without split-brain writes. This is a valid test for another condition (A two-site SAN continuity design omits the mediator or quorum mechanisms required by its selected SnapMirror active sync topology) after a different correction (Validate the supported mediator placement and cluster connectivity for the chosen active sync design). It does not establish the necessary result for Linden Manufacturing's factory CAD datasets and ERP volumes: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

D:

The design documents which node or site failures each mechanism covers and proves the selected recovery path. This is a valid test for another condition (A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions) after a different correction (Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements). It does not establish the necessary result for Linden Manufacturing's factory CAD datasets and ERP volumes: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

Question 519

At Cobalt Aerospace, the production environment supports CAD shares and simulation data volumes under a documented recovery-time objective. Investigators find: A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload. Which administrative action BEST addresses the specific problem?

  1. Validate the supported mediator placement and cluster connectivity for the chosen active sync design.
  2. Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements.
  3. Verify destination resources, compatibility and protected workload capacity before permitting switchover.
  4. Include SVM and client access reconfiguration in the end-to-end recovery runbook.

Explanation

Correct Answer

C:

Verify destination resources, compatibility and protected workload capacity before permitting switchover. This action addresses the specific failure: A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload. For Cobalt Aerospace's CAD shares and simulation data volumes, a successful implementation should produce the following evidence: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

Incorrect Answers

A:

Validate the supported mediator placement and cluster connectivity for the chosen active sync design. That approach targets a different ONTAP condition: A two-site SAN continuity design omits the mediator or quorum mechanisms required by its selected SnapMirror active sync topology. At Cobalt Aerospace, for CAD shares and simulation data volumes, the actual failure is: A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload. That alternative by itself would not prove the needed outcome: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

B:

Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements. That approach targets a different ONTAP condition: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. At Cobalt Aerospace, for CAD shares and simulation data volumes, the actual failure is: A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload. That alternative by itself would not prove the needed outcome: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

D:

Include SVM and client access reconfiguration in the end-to-end recovery runbook. That approach targets a different ONTAP condition: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. At Cobalt Aerospace, for CAD shares and simulation data volumes, the actual failure is: A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload. That alternative by itself would not prove the needed outcome: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

Question 520

At Cobalt Aerospace, the production environment supports CAD shares and simulation data volumes under a documented recovery-time objective. Investigators find: A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload. The team reports that the correction is complete. Which observation BEST proves the stated problem is resolved?

  1. The design documents which node or site failures each mechanism covers and proves the selected recovery path.
  2. The target site accepts the planned workload and capacity telemetry stays within validated thresholds.
  3. An inter-site link interruption follows the expected fenced failover behavior without split-brain writes.
  4. A representative client mounts the recovered file service through an approved network route after failover.

Explanation

Correct Answer

B:

The target site accepts the planned workload and capacity telemetry stays within validated thresholds. The observation verifies that the chosen action (Verify destination resources, compatibility and protected workload capacity before permitting switchover) has corrected the initiating failure (A planned switchover proceeds even though the remote site has insufficient capacity for the protected workload). This is directly measurable for Cobalt Aerospace's CAD shares and simulation data volumes rather than merely reporting task completion.

Incorrect Answers

A:

The design documents which node or site failures each mechanism covers and proves the selected recovery path. This is a valid test for another condition (A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions) after a different correction (Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements). It does not establish the necessary result for Cobalt Aerospace's CAD shares and simulation data volumes: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

C:

An inter-site link interruption follows the expected fenced failover behavior without split-brain writes. This is a valid test for another condition (A two-site SAN continuity design omits the mediator or quorum mechanisms required by its selected SnapMirror active sync topology) after a different correction (Validate the supported mediator placement and cluster connectivity for the chosen active sync design). It does not establish the necessary result for Cobalt Aerospace's CAD shares and simulation data volumes: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

D:

A representative client mounts the recovered file service through an approved network route after failover. This is a valid test for another condition (A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records) after a different correction (Include SVM and client access reconfiguration in the end-to-end recovery runbook). It does not establish the necessary result for Cobalt Aerospace's CAD shares and simulation data volumes: The target site accepts the planned workload and capacity telemetry stays within validated thresholds.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests