McAfee-Secured Website

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

100% Network Appliance NS0-165 Guaranteed Success With Testking Training Materials

Get Real NS0-165 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 51

Question 500

Northbridge University manages research file shares and database LUNs with separately managed development and production resources. A storage incident report states: A two-site SAN continuity design omits the mediator or quorum mechanisms required by its selected SnapMirror active sync topology. The team reports that the correction is complete. Which observation BEST proves the stated problem is resolved?

  1. A controlled site-failure simulation maintains or restores service within defined RPO and RTO.
  2. The design documents which node or site failures each mechanism covers and proves the selected recovery path.
  3. An inter-site link interruption follows the expected fenced failover behavior without split-brain writes.
  4. Post-failover database consistency checks succeed for all related LUNs at one recovery point.

Explanation

Correct Answer

C:

An inter-site link interruption follows the expected fenced failover behavior without split-brain writes. The observation verifies that the chosen action (Validate the supported mediator placement and cluster connectivity for the chosen active sync design) has corrected the initiating failure (A two-site SAN continuity design omits the mediator or quorum mechanisms required by its selected SnapMirror active sync topology). This is directly measurable for Northbridge University's research file shares and database LUNs rather than merely reporting task completion.

Incorrect Answers

A:

A controlled site-failure simulation maintains or restores service within defined RPO and RTO. This is a valid test for another condition (A mission-critical application requires near-zero interruption after a site outage but the plan provides only asynchronous once-daily SnapMirror updates) after a different correction (Evaluate a supported synchronous or SnapMirror active sync design appropriate to host and platform constraints). It does not establish the necessary result for Northbridge University's research file shares and database LUNs: An inter-site link interruption follows the expected fenced failover behavior without split-brain writes.

B:

The design documents which node or site failures each mechanism covers and proves the selected recovery path. This is a valid test for another condition (A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions) after a different correction (Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements). It does not establish the necessary result for Northbridge University's research file shares and database LUNs: An inter-site link interruption follows the expected fenced failover behavior without split-brain writes.

D:

Post-failover database consistency checks succeed for all related LUNs at one recovery point. This is a valid test for another condition (An application spans multiple LUNs but its business-continuity plan protects each volume independently without write-order coordination) after a different correction (Use supported application consistency groups for SnapMirror active sync or suitable coordinated replication). It does not establish the necessary result for Northbridge University's research file shares and database LUNs: An inter-site link interruption follows the expected fenced failover behavior without split-brain writes.

Question 501

The ONTAP administrators at Linden Manufacturing are responsible for factory CAD datasets and ERP volumes. Their assessment shows: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. Which administrative action BEST addresses the specific problem?

  1. Include SVM and client access reconfiguration in the end-to-end recovery runbook.
  2. Define application-level integrity and transaction probes as continuity acceptance criteria.
  3. Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements.
  4. Validate the supported mediator placement and cluster connectivity for the chosen active sync design.

Explanation

Correct Answer

C:

Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements. This action addresses the specific failure: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. For Linden Manufacturing's factory CAD datasets and ERP volumes, a successful implementation should produce the following evidence: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

Incorrect Answers

A:

Include SVM and client access reconfiguration in the end-to-end recovery runbook. That approach targets a different ONTAP condition: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. At Linden Manufacturing, for factory CAD datasets and ERP volumes, the actual failure is: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. That alternative by itself would not prove the needed outcome: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

B:

Define application-level integrity and transaction probes as continuity acceptance criteria. That approach targets a different ONTAP condition: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. At Linden Manufacturing, for factory CAD datasets and ERP volumes, the actual failure is: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. That alternative by itself would not prove the needed outcome: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

D:

Validate the supported mediator placement and cluster connectivity for the chosen active sync design. That approach targets a different ONTAP condition: A two-site SAN continuity design omits the mediator or quorum mechanisms required by its selected SnapMirror active sync topology. At Linden Manufacturing, for factory CAD datasets and ERP volumes, the actual failure is: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. That alternative by itself would not prove the needed outcome: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

Question 502

The ONTAP administrators at Linden Manufacturing are responsible for factory CAD datasets and ERP volumes. Their assessment shows: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. The team reports that the correction is complete. Which observation BEST proves the stated problem is resolved?

  1. A representative client mounts the recovered file service through an approved network route after failover.
  2. The design documents which node or site failures each mechanism covers and proves the selected recovery path.
  3. An application transaction passes after failover and recorded outage duration meets the agreed target.
  4. An inter-site link interruption follows the expected fenced failover behavior without split-brain writes.

Explanation

Correct Answer

B:

The design documents which node or site failures each mechanism covers and proves the selected recovery path. The observation verifies that the chosen action (Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements) has corrected the initiating failure (A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions). This is directly measurable for Linden Manufacturing's factory CAD datasets and ERP volumes rather than merely reporting task completion.

Incorrect Answers

A:

A representative client mounts the recovered file service through an approved network route after failover. This is a valid test for another condition (A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records) after a different correction (Include SVM and client access reconfiguration in the end-to-end recovery runbook). It does not establish the necessary result for Linden Manufacturing's factory CAD datasets and ERP volumes: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

C:

An application transaction passes after failover and recorded outage duration meets the agreed target. This is a valid test for another condition (A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover) after a different correction (Define application-level integrity and transaction probes as continuity acceptance criteria). It does not establish the necessary result for Linden Manufacturing's factory CAD datasets and ERP volumes: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

D:

An inter-site link interruption follows the expected fenced failover behavior without split-brain writes. This is a valid test for another condition (A two-site SAN continuity design omits the mediator or quorum mechanisms required by its selected SnapMirror active sync topology) after a different correction (Validate the supported mediator placement and cluster connectivity for the chosen active sync design). It does not establish the necessary result for Linden Manufacturing's factory CAD datasets and ERP volumes: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

Question 503

At Cobalt Aerospace, the production environment supports CAD shares and simulation data volumes under a documented recovery-time objective. Investigators find: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. Which administrative action BEST addresses the specific problem?

  1. Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements.
  2. Validate the supported mediator placement and cluster connectivity for the chosen active sync design.
  3. Include SVM and client access reconfiguration in the end-to-end recovery runbook.
  4. Define application-level integrity and transaction probes as continuity acceptance criteria.

Explanation

Correct Answer

A:

Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements. This action addresses the specific failure: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. For Cobalt Aerospace's CAD shares and simulation data volumes, a successful implementation should produce the following evidence: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

Incorrect Answers

B:

Validate the supported mediator placement and cluster connectivity for the chosen active sync design. That approach targets a different ONTAP condition: A two-site SAN continuity design omits the mediator or quorum mechanisms required by its selected SnapMirror active sync topology. At Cobalt Aerospace, for CAD shares and simulation data volumes, the actual failure is: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. That alternative by itself would not prove the needed outcome: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

C:

Include SVM and client access reconfiguration in the end-to-end recovery runbook. That approach targets a different ONTAP condition: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. At Cobalt Aerospace, for CAD shares and simulation data volumes, the actual failure is: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. That alternative by itself would not prove the needed outcome: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

D:

Define application-level integrity and transaction probes as continuity acceptance criteria. That approach targets a different ONTAP condition: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. At Cobalt Aerospace, for CAD shares and simulation data volumes, the actual failure is: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. That alternative by itself would not prove the needed outcome: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

Question 504

At Cobalt Aerospace, the production environment supports CAD shares and simulation data volumes under a documented recovery-time objective. Investigators find: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. The team reports that the correction is complete. Which observation BEST proves the stated problem is resolved?

  1. An inter-site link interruption follows the expected fenced failover behavior without split-brain writes.
  2. An application transaction passes after failover and recorded outage duration meets the agreed target.
  3. The design documents which node or site failures each mechanism covers and proves the selected recovery path.
  4. A representative client mounts the recovered file service through an approved network route after failover.

Explanation

Correct Answer

C:

The design documents which node or site failures each mechanism covers and proves the selected recovery path. The observation verifies that the chosen action (Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements) has corrected the initiating failure (A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions). This is directly measurable for Cobalt Aerospace's CAD shares and simulation data volumes rather than merely reporting task completion.

Incorrect Answers

A:

An inter-site link interruption follows the expected fenced failover behavior without split-brain writes. This is a valid test for another condition (A two-site SAN continuity design omits the mediator or quorum mechanisms required by its selected SnapMirror active sync topology) after a different correction (Validate the supported mediator placement and cluster connectivity for the chosen active sync design). It does not establish the necessary result for Cobalt Aerospace's CAD shares and simulation data volumes: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

B:

An application transaction passes after failover and recorded outage duration meets the agreed target. This is a valid test for another condition (A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover) after a different correction (Define application-level integrity and transaction probes as continuity acceptance criteria). It does not establish the necessary result for Cobalt Aerospace's CAD shares and simulation data volumes: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

D:

A representative client mounts the recovered file service through an approved network route after failover. This is a valid test for another condition (A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records) after a different correction (Include SVM and client access reconfiguration in the end-to-end recovery runbook). It does not establish the necessary result for Cobalt Aerospace's CAD shares and simulation data volumes: The design documents which node or site failures each mechanism covers and proves the selected recovery path.

Question 505

A storage engineer reviewing Sapphire Data Systems's multi-tenant NFS volumes and iSCSI databases observes: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. Which administrative action BEST addresses the specific problem?

  1. Include SVM and client access reconfiguration in the end-to-end recovery runbook.
  2. Confirm replication state, latest recoverable checkpoint and approved failover sequence before promoting the destination.
  3. Define application-level integrity and transaction probes as continuity acceptance criteria.
  4. Use supported application consistency groups for SnapMirror active sync or suitable coordinated replication.

Explanation

Correct Answer

B:

Confirm replication state, latest recoverable checkpoint and approved failover sequence before promoting the destination. This action addresses the specific failure: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. For Sapphire Data Systems's multi-tenant NFS volumes and iSCSI databases, a successful implementation should produce the following evidence: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

Incorrect Answers

A:

Include SVM and client access reconfiguration in the end-to-end recovery runbook. That approach targets a different ONTAP condition: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. At Sapphire Data Systems, for multi-tenant NFS volumes and iSCSI databases, the actual failure is: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. That alternative by itself would not prove the needed outcome: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

C:

Define application-level integrity and transaction probes as continuity acceptance criteria. That approach targets a different ONTAP condition: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. At Sapphire Data Systems, for multi-tenant NFS volumes and iSCSI databases, the actual failure is: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. That alternative by itself would not prove the needed outcome: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

D:

Use supported application consistency groups for SnapMirror active sync or suitable coordinated replication. That approach targets a different ONTAP condition: An application spans multiple LUNs but its business-continuity plan protects each volume independently without write-order coordination. At Sapphire Data Systems, for multi-tenant NFS volumes and iSCSI databases, the actual failure is: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. That alternative by itself would not prove the needed outcome: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

Question 506

A storage engineer reviewing Sapphire Data Systems's multi-tenant NFS volumes and iSCSI databases observes: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. The team reports that the correction is complete. Which observation BEST proves the stated problem is resolved?

  1. A representative client mounts the recovered file service through an approved network route after failover.
  2. The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.
  3. Post-failover database consistency checks succeed for all related LUNs at one recovery point.
  4. An application transaction passes after failover and recorded outage duration meets the agreed target.

Explanation

Correct Answer

B:

The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary. The observation verifies that the chosen action (Confirm replication state, latest recoverable checkpoint and approved failover sequence before promoting the destination) has corrected the initiating failure (An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current). This is directly measurable for Sapphire Data Systems's multi-tenant NFS volumes and iSCSI databases rather than merely reporting task completion.

Incorrect Answers

A:

A representative client mounts the recovered file service through an approved network route after failover. This is a valid test for another condition (A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records) after a different correction (Include SVM and client access reconfiguration in the end-to-end recovery runbook). It does not establish the necessary result for Sapphire Data Systems's multi-tenant NFS volumes and iSCSI databases: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

C:

Post-failover database consistency checks succeed for all related LUNs at one recovery point. This is a valid test for another condition (An application spans multiple LUNs but its business-continuity plan protects each volume independently without write-order coordination) after a different correction (Use supported application consistency groups for SnapMirror active sync or suitable coordinated replication). It does not establish the necessary result for Sapphire Data Systems's multi-tenant NFS volumes and iSCSI databases: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

D:

An application transaction passes after failover and recorded outage duration meets the agreed target. This is a valid test for another condition (A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover) after a different correction (Define application-level integrity and transaction probes as continuity acceptance criteria). It does not establish the necessary result for Sapphire Data Systems's multi-tenant NFS volumes and iSCSI databases: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

Question 507

Brightstone Legal manages document management NAS volumes with separately managed development and production resources. A storage incident report states: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. Which administrative action BEST addresses the specific problem?

  1. Use supported application consistency groups for SnapMirror active sync or suitable coordinated replication.
  2. Confirm replication state, latest recoverable checkpoint and approved failover sequence before promoting the destination.
  3. Define application-level integrity and transaction probes as continuity acceptance criteria.
  4. Include SVM and client access reconfiguration in the end-to-end recovery runbook.

Explanation

Correct Answer

B:

Confirm replication state, latest recoverable checkpoint and approved failover sequence before promoting the destination. This action addresses the specific failure: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. For Brightstone Legal's document management NAS volumes, a successful implementation should produce the following evidence: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

Incorrect Answers

A:

Use supported application consistency groups for SnapMirror active sync or suitable coordinated replication. That approach targets a different ONTAP condition: An application spans multiple LUNs but its business-continuity plan protects each volume independently without write-order coordination. At Brightstone Legal, for document management NAS volumes, the actual failure is: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. That alternative by itself would not prove the needed outcome: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

C:

Define application-level integrity and transaction probes as continuity acceptance criteria. That approach targets a different ONTAP condition: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. At Brightstone Legal, for document management NAS volumes, the actual failure is: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. That alternative by itself would not prove the needed outcome: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

D:

Include SVM and client access reconfiguration in the end-to-end recovery runbook. That approach targets a different ONTAP condition: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. At Brightstone Legal, for document management NAS volumes, the actual failure is: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. That alternative by itself would not prove the needed outcome: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

Question 508

Brightstone Legal manages document management NAS volumes with separately managed development and production resources. A storage incident report states: An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current. The team reports that the correction is complete. Which observation BEST proves the stated problem is resolved?

  1. The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.
  2. An application transaction passes after failover and recorded outage duration meets the agreed target.
  3. A representative client mounts the recovered file service through an approved network route after failover.
  4. Post-failover database consistency checks succeed for all related LUNs at one recovery point.

Explanation

Correct Answer

A:

The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary. The observation verifies that the chosen action (Confirm replication state, latest recoverable checkpoint and approved failover sequence before promoting the destination) has corrected the initiating failure (An operator initiates an unplanned disaster recovery cutover without verifying whether the replicated destination is current). This is directly measurable for Brightstone Legal's document management NAS volumes rather than merely reporting task completion.

Incorrect Answers

B:

An application transaction passes after failover and recorded outage duration meets the agreed target. This is a valid test for another condition (A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover) after a different correction (Define application-level integrity and transaction probes as continuity acceptance criteria). It does not establish the necessary result for Brightstone Legal's document management NAS volumes: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

C:

A representative client mounts the recovered file service through an approved network route after failover. This is a valid test for another condition (A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records) after a different correction (Include SVM and client access reconfiguration in the end-to-end recovery runbook). It does not establish the necessary result for Brightstone Legal's document management NAS volumes: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

D:

Post-failover database consistency checks succeed for all related LUNs at one recovery point. This is a valid test for another condition (An application spans multiple LUNs but its business-continuity plan protects each volume independently without write-order coordination) after a different correction (Use supported application consistency groups for SnapMirror active sync or suitable coordinated replication). It does not establish the necessary result for Brightstone Legal's document management NAS volumes: The recovered service uses a measured recovery point and the cutover audit records its data-loss boundary.

Question 509

The storage reliability team at Silver Cove Payments are responsible for settlement data volumes and secure backups. Their assessment shows: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. Which administrative action BEST addresses the specific problem?

  1. Include SVM and client access reconfiguration in the end-to-end recovery runbook.
  2. Define application-level integrity and transaction probes as continuity acceptance criteria.
  3. Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements.
  4. Evaluate a supported synchronous or SnapMirror active sync design appropriate to host and platform constraints.

Explanation

Correct Answer

A:

Include SVM and client access reconfiguration in the end-to-end recovery runbook. This action addresses the specific failure: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. For Silver Cove Payments's settlement data volumes and secure backups, a successful implementation should produce the following evidence: A representative client mounts the recovered file service through an approved network route after failover.

Incorrect Answers

B:

Define application-level integrity and transaction probes as continuity acceptance criteria. That approach targets a different ONTAP condition: A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover. At Silver Cove Payments, for settlement data volumes and secure backups, the actual failure is: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. That alternative by itself would not prove the needed outcome: A representative client mounts the recovered file service through an approved network route after failover.

C:

Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements. That approach targets a different ONTAP condition: A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions. At Silver Cove Payments, for settlement data volumes and secure backups, the actual failure is: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. That alternative by itself would not prove the needed outcome: A representative client mounts the recovered file service through an approved network route after failover.

D:

Evaluate a supported synchronous or SnapMirror active sync design appropriate to host and platform constraints. That approach targets a different ONTAP condition: A mission-critical application requires near-zero interruption after a site outage but the plan provides only asynchronous once-daily SnapMirror updates. At Silver Cove Payments, for settlement data volumes and secure backups, the actual failure is: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. That alternative by itself would not prove the needed outcome: A representative client mounts the recovered file service through an approved network route after failover.

Question 510

The storage reliability team at Silver Cove Payments are responsible for settlement data volumes and secure backups. Their assessment shows: A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records. The team reports that the correction is complete. Which observation BEST proves the stated problem is resolved?

  1. A controlled site-failure simulation maintains or restores service within defined RPO and RTO.
  2. The design documents which node or site failures each mechanism covers and proves the selected recovery path.
  3. An application transaction passes after failover and recorded outage duration meets the agreed target.
  4. A representative client mounts the recovered file service through an approved network route after failover.

Explanation

Correct Answer

D:

A representative client mounts the recovered file service through an approved network route after failover. The observation verifies that the chosen action (Include SVM and client access reconfiguration in the end-to-end recovery runbook) has corrected the initiating failure (A site-level recovery plan restores the replicated volume but neglects protocol LIFs, SVM networking and client DNS records). This is directly measurable for Silver Cove Payments's settlement data volumes and secure backups rather than merely reporting task completion.

Incorrect Answers

A:

A controlled site-failure simulation maintains or restores service within defined RPO and RTO. This is a valid test for another condition (A mission-critical application requires near-zero interruption after a site outage but the plan provides only asynchronous once-daily SnapMirror updates) after a different correction (Evaluate a supported synchronous or SnapMirror active sync design appropriate to host and platform constraints). It does not establish the necessary result for Silver Cove Payments's settlement data volumes and secure backups: A representative client mounts the recovered file service through an approved network route after failover.

B:

The design documents which node or site failures each mechanism covers and proves the selected recovery path. This is a valid test for another condition (A regional continuity plan refers to MetroCluster and ordinary local HA as interchangeable solutions) after a different correction (Match MetroCluster architecture and distance or quorum prerequisites to actual site-level continuity requirements). It does not establish the necessary result for Silver Cove Payments's settlement data volumes and secure backups: A representative client mounts the recovered file service through an approved network route after failover.

C:

An application transaction passes after failover and recorded outage duration meets the agreed target. This is a valid test for another condition (A business-continuity test exercises storage access alone and ignores whether the application can complete transactions after failover) after a different correction (Define application-level integrity and transaction probes as continuity acceptance criteria). It does not establish the necessary result for Silver Cove Payments's settlement data volumes and secure backups: A representative client mounts the recovered file service through an approved network route after failover.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests