McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 97

Question 960

Within Routing Policy and Firewall Filters, a technician selects this approach: Use a policy from protocol static match condition for the static-route term. Which original requirement or fault would most directly justify it?

  1. A router's management and routing-protocol traffic should be restricted to approved control-plane sources.
  2. An interface filter should identify TCP traffic intended for the SSH service on port 22.
  3. A traffic policy should classify or restrict packets as they leave the interface toward a downstream network.
  4. An export policy must treat static routes differently from OSPF-learned routes.

Explanation

Correct Answer

D:

The from protocol match selects routes based on their protocol origin. This meets the stated need for policy match protocol.

Incorrect Answers

A:

The protect routing engine lo0 scenario has a different requirement: A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges. It does not directly meet the policy match protocol need in this question.

B:

The firewall destination-port match scenario has a different requirement: A destination-port match identifies the transport service being requested by the packet. It does not directly meet the policy match protocol need in this question.

C:

The egress firewall filter scenario has a different requirement: An output filter evaluates eligible packets on egress rather than at ingress. It does not directly meet the policy match protocol need in this question.

Question 961

A policy should match 198.51.100.0/24 but not its /25 subnets or its /23 aggregate. Which configuration or troubleshooting action most directly meets the need?

  1. Apply a supported policer action to matching firewall filter traffic.
  2. Use a supported next-hop action in the correct routing policy context.
  3. Use route-filter 198.51.100.0/24 exact.
  4. Use a policy from protocol static match condition for the static-route term.

Explanation

Correct Answer

C:

The exact route-filter match requires the specified network and prefix length to be the same. This meets the stated need for exact route-filter match.

Incorrect Answers

A:

The firewall policer rate limit scenario has a different requirement: A policer enforces rate or burst constraints for a class of packets according to its configured behavior. It does not directly meet the exact route-filter match need in this question.

B:

The policy next-hop action scenario has a different requirement: Routing policy can alter eligible route attributes, including supported next-hop behavior. It does not directly meet the exact route-filter match need in this question.

D:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the exact route-filter match need in this question.

Question 962

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use route-filter 198.51.100.0/24 exact. Which concept or operating procedure is best illustrated?

  1. Firewall policer rate limit
  2. Policy next-hop action
  3. Policy match protocol
  4. Exact route-filter match

Explanation

Correct Answer

D:

The exact route-filter match requires the specified network and prefix length to be the same. This meets the stated need for exact route-filter match.

Incorrect Answers

A:

The firewall policer rate limit scenario has a different requirement: A policer enforces rate or burst constraints for a class of packets according to its configured behavior. It does not directly meet the exact route-filter match need in this question.

B:

The policy next-hop action scenario has a different requirement: Routing policy can alter eligible route attributes, including supported next-hop behavior. It does not directly meet the exact route-filter match need in this question.

C:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the exact route-filter match need in this question.

Question 963

A policy should match 198.51.100.0/24 but not its /25 subnets or its /23 aggregate. The proposed response is: Use route-filter 198.51.100.0/24 exact. Which explanation most accurately supports this response?

  1. A policer enforces rate or burst constraints for a class of packets according to its configured behavior.
  2. Routing policy can alter eligible route attributes, including supported next-hop behavior.
  3. The from protocol match selects routes based on their protocol origin.
  4. The exact route-filter match requires the specified network and prefix length to be the same.

Explanation

Correct Answer

D:

The exact route-filter match requires the specified network and prefix length to be the same. This meets the stated need for exact route-filter match.

Incorrect Answers

A:

The firewall policer rate limit scenario has a different requirement: A policer enforces rate or burst constraints for a class of packets according to its configured behavior. It does not directly meet the exact route-filter match need in this question.

B:

The policy next-hop action scenario has a different requirement: Routing policy can alter eligible route attributes, including supported next-hop behavior. It does not directly meet the exact route-filter match need in this question.

C:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the exact route-filter match need in this question.

Question 964

Within Routing Policy and Firewall Filters, a technician selects this approach: Use route-filter 198.51.100.0/24 exact. Which original requirement or fault would most directly justify it?

  1. A known packet class should be rate-limited rather than completely dropped at all traffic levels.
  2. A policy needs to set an appropriate routing next-hop attribute for selected eligible routes.
  3. A policy should match 198.51.100.0/24 but not its /25 subnets or its /23 aggregate.
  4. An export policy must treat static routes differently from OSPF-learned routes.

Explanation

Correct Answer

C:

The exact route-filter match requires the specified network and prefix length to be the same. This meets the stated need for exact route-filter match.

Incorrect Answers

A:

The firewall policer rate limit scenario has a different requirement: A policer enforces rate or burst constraints for a class of packets according to its configured behavior. It does not directly meet the exact route-filter match need in this question.

B:

The policy next-hop action scenario has a different requirement: Routing policy can alter eligible route attributes, including supported next-hop behavior. It does not directly meet the exact route-filter match need in this question.

D:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the exact route-filter match need in this question.

Question 965

A routing policy should match 198.51.100.0/24 and any of its more-specific routes. Which configuration or troubleshooting action most directly meets the need?

  1. Use route-filter 198.51.100.0/24 orlonger.
  2. Use then discard in the matching firewall filter term.
  3. Use an interface firewall filter rather than a routing import/export policy.
  4. Use then reject for that term in the appropriate import or export policy.

Explanation

Correct Answer

A:

The orlonger operator matches the named prefix and more-specific routes beneath it. This meets the stated need for orlonger route-filter match.

Incorrect Answers

B:

The firewall filter discard action scenario has a different requirement: Discard drops matched packets without explicitly returning an unreachable response. It does not directly meet the orlonger route-filter match need in this question.

C:

The firewall filter versus routing policy scenario has a different requirement: Firewall filters evaluate packets while routing policies influence route learning or advertisement. It does not directly meet the orlonger route-filter match need in this question.

D:

The policy then reject scenario has a different requirement: A reject action terminates policy processing for that route with a negative decision. It does not directly meet the orlonger route-filter match need in this question.

Question 966

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use route-filter 198.51.100.0/24 orlonger. Which concept or operating procedure is best illustrated?

  1. Firewall filter discard action
  2. Firewall filter versus routing policy
  3. Policy then reject
  4. Orlonger route-filter match

Explanation

Correct Answer

D:

The orlonger operator matches the named prefix and more-specific routes beneath it. This meets the stated need for orlonger route-filter match.

Incorrect Answers

A:

The firewall filter discard action scenario has a different requirement: Discard drops matched packets without explicitly returning an unreachable response. It does not directly meet the orlonger route-filter match need in this question.

B:

The firewall filter versus routing policy scenario has a different requirement: Firewall filters evaluate packets while routing policies influence route learning or advertisement. It does not directly meet the orlonger route-filter match need in this question.

C:

The policy then reject scenario has a different requirement: A reject action terminates policy processing for that route with a negative decision. It does not directly meet the orlonger route-filter match need in this question.

Question 967

A routing policy should match 198.51.100.0/24 and any of its more-specific routes. The proposed response is: Use route-filter 198.51.100.0/24 orlonger. Which explanation most accurately supports this response?

  1. The orlonger operator matches the named prefix and more-specific routes beneath it.
  2. Discard drops matched packets without explicitly returning an unreachable response.
  3. Firewall filters evaluate packets while routing policies influence route learning or advertisement.
  4. A reject action terminates policy processing for that route with a negative decision.

Explanation

Correct Answer

A:

The orlonger operator matches the named prefix and more-specific routes beneath it. This meets the stated need for orlonger route-filter match.

Incorrect Answers

B:

The firewall filter discard action scenario has a different requirement: Discard drops matched packets without explicitly returning an unreachable response. It does not directly meet the orlonger route-filter match need in this question.

C:

The firewall filter versus routing policy scenario has a different requirement: Firewall filters evaluate packets while routing policies influence route learning or advertisement. It does not directly meet the orlonger route-filter match need in this question.

D:

The policy then reject scenario has a different requirement: A reject action terminates policy processing for that route with a negative decision. It does not directly meet the orlonger route-filter match need in this question.

Question 968

Within Routing Policy and Firewall Filters, a technician selects this approach: Use route-filter 198.51.100.0/24 orlonger. Which original requirement or fault would most directly justify it?

  1. A stateless ingress policy should silently drop a known unwanted traffic class.
  2. A network engineer wants to block unwanted TCP packets arriving at an interface, not reject learned prefixes.
  3. A route matched by a deny term must be excluded from the intended routing exchange.
  4. A routing policy should match 198.51.100.0/24 and any of its more-specific routes.

Explanation

Correct Answer

D:

The orlonger operator matches the named prefix and more-specific routes beneath it. This meets the stated need for orlonger route-filter match.

Incorrect Answers

A:

The firewall filter discard action scenario has a different requirement: Discard drops matched packets without explicitly returning an unreachable response. It does not directly meet the orlonger route-filter match need in this question.

B:

The firewall filter versus routing policy scenario has a different requirement: Firewall filters evaluate packets while routing policies influence route learning or advertisement. It does not directly meet the orlonger route-filter match need in this question.

C:

The policy then reject scenario has a different requirement: A reject action terminates policy processing for that route with a negative decision. It does not directly meet the orlonger route-filter match need in this question.

Question 969

A policy must match only more-specifics of 203.0.113.0/24, not the /24 itself. Which configuration or troubleshooting action most directly meets the need?

  1. Check the protocol-specific default import and export rules before adding broad accept terms.
  2. Match the configured BGP community in an appropriate policy term.
  3. Use a policy from protocol static match condition for the static-route term.
  4. Use route-filter 203.0.113.0/24 longer.

Explanation

Correct Answer

D:

The longer operator excludes the stated base prefix while matching routes with additional prefix bits. This meets the stated need for longer-only route-filter match.

Incorrect Answers

A:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the longer-only route-filter match need in this question.

B:

The bgp community match scenario has a different requirement: BGP communities provide route attributes that policies can examine or modify for routing decisions. It does not directly meet the longer-only route-filter match need in this question.

C:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the longer-only route-filter match need in this question.

Question 970

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use route-filter 203.0.113.0/24 longer. Which concept or operating procedure is best illustrated?

  1. Longer-only route-filter match
  2. Default routing-policy behavior
  3. BGP community match
  4. Policy match protocol

Explanation

Correct Answer

A:

The longer operator excludes the stated base prefix while matching routes with additional prefix bits. This meets the stated need for longer-only route-filter match.

Incorrect Answers

B:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the longer-only route-filter match need in this question.

C:

The bgp community match scenario has a different requirement: BGP communities provide route attributes that policies can examine or modify for routing decisions. It does not directly meet the longer-only route-filter match need in this question.

D:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the longer-only route-filter match need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests