McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 2

Question 10

Within Networking Fundamentals, a Junos engineer proposes the following response: Introduce a Layer 3 router or routed switch interface between the two IP networks. Which concept or operating procedure is best illustrated?

  1. TCP three-way handshake
  2. NAT boundary translation
  3. Router versus switch function
  4. Longest-prefix matching

Explanation

Correct Answer

C:

Layer 3 forwarding selects an outgoing path using destination IP prefixes; ordinary Layer 2 switching does not route between subnets. This meets the stated need for router versus switch function.

Incorrect Answers

A:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the router versus switch function need in this question.

B:

The nat boundary translation scenario has a different requirement: Source NAT can translate private source addresses to an outward-facing address for Internet access. It does not directly meet the router versus switch function need in this question.

D:

The longest-prefix matching scenario has a different requirement: IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. It does not directly meet the router versus switch function need in this question.

Question 11

Hosts in two different IP subnets must communicate, but only an unmanaged Layer 2 switch connects them. The proposed response is: Introduce a Layer 3 router or routed switch interface between the two IP networks. Which explanation most accurately supports this response?

  1. The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established.
  2. Source NAT can translate private source addresses to an outward-facing address for Internet access.
  3. IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence.
  4. Layer 3 forwarding selects an outgoing path using destination IP prefixes; ordinary Layer 2 switching does not route between subnets.

Explanation

Correct Answer

D:

Layer 3 forwarding selects an outgoing path using destination IP prefixes; ordinary Layer 2 switching does not route between subnets. This meets the stated need for router versus switch function.

Incorrect Answers

A:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the router versus switch function need in this question.

B:

The nat boundary translation scenario has a different requirement: Source NAT can translate private source addresses to an outward-facing address for Internet access. It does not directly meet the router versus switch function need in this question.

C:

The longest-prefix matching scenario has a different requirement: IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. It does not directly meet the router versus switch function need in this question.

Question 12

Within Networking Fundamentals, a technician selects this approach: Introduce a Layer 3 router or routed switch interface between the two IP networks. Which original requirement or fault would most directly justify it?

  1. Hosts in two different IP subnets must communicate, but only an unmanaged Layer 2 switch connects them.
  2. A packet capture shows SYN, SYN-ACK, and ACK before payload exchange.
  3. Internal 10.10.0.0/16 hosts must reach the public Internet through one edge address.
  4. A router learns 203.0.113.0/24 and the more-specific 203.0.113.128/25, then forwards to 203.0.113.140.

Explanation

Correct Answer

A:

Layer 3 forwarding selects an outgoing path using destination IP prefixes; ordinary Layer 2 switching does not route between subnets. This meets the stated need for router versus switch function.

Incorrect Answers

B:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the router versus switch function need in this question.

C:

The nat boundary translation scenario has a different requirement: Source NAT can translate private source addresses to an outward-facing address for Internet access. It does not directly meet the router versus switch function need in this question.

D:

The longest-prefix matching scenario has a different requirement: IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. It does not directly meet the router versus switch function need in this question.

Question 13

A switch initially has no forwarding entry for a newly connected host's Ethernet address. Which configuration or troubleshooting action most directly meets the need?

  1. Allow the switch to learn the source MAC address and ingress port from frames sent by that host.
  2. Choose the /25 route for that destination when both routes are active.
  3. Allocate an IPv4 /27 subnet for the 30-host segment.
  4. Select TCP with its connection establishment and acknowledgment behavior.

Explanation

Correct Answer

A:

Ethernet switches populate their forwarding database from source MAC addresses observed on ingress frames. This meets the stated need for ethernet source-mac learning.

Incorrect Answers

B:

The longest-prefix matching scenario has a different requirement: IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. It does not directly meet the ethernet source-mac learning need in this question.

C:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the ethernet source-mac learning need in this question.

D:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the ethernet source-mac learning need in this question.

Question 14

Within Networking Fundamentals, a Junos engineer proposes the following response: Allow the switch to learn the source MAC address and ingress port from frames sent by that host. Which concept or operating procedure is best illustrated?

  1. Longest-prefix matching
  2. Ethernet source-MAC learning
  3. IPv4 /27 usable hosts
  4. TCP connection setup

Explanation

Correct Answer

B:

Ethernet switches populate their forwarding database from source MAC addresses observed on ingress frames. This meets the stated need for ethernet source-mac learning.

Incorrect Answers

A:

The longest-prefix matching scenario has a different requirement: IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. It does not directly meet the ethernet source-mac learning need in this question.

C:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the ethernet source-mac learning need in this question.

D:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the ethernet source-mac learning need in this question.

Question 15

A switch initially has no forwarding entry for a newly connected host's Ethernet address. The proposed response is: Allow the switch to learn the source MAC address and ingress port from frames sent by that host. Which explanation most accurately supports this response?

  1. Ethernet switches populate their forwarding database from source MAC addresses observed on ingress frames.
  2. IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence.
  3. A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts.
  4. TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission.

Explanation

Correct Answer

A:

Ethernet switches populate their forwarding database from source MAC addresses observed on ingress frames. This meets the stated need for ethernet source-mac learning.

Incorrect Answers

B:

The longest-prefix matching scenario has a different requirement: IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. It does not directly meet the ethernet source-mac learning need in this question.

C:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the ethernet source-mac learning need in this question.

D:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the ethernet source-mac learning need in this question.

Question 16

Within Networking Fundamentals, a technician selects this approach: Allow the switch to learn the source MAC address and ingress port from frames sent by that host. Which original requirement or fault would most directly justify it?

  1. A router learns 203.0.113.0/24 and the more-specific 203.0.113.128/25, then forwards to 203.0.113.140.
  2. A switch initially has no forwarding entry for a newly connected host's Ethernet address.
  3. A network engineer must choose a subnet with 30 ordinary IPv4 host addresses.
  4. An application needs reliable ordered delivery over an established byte-stream connection.

Explanation

Correct Answer

B:

Ethernet switches populate their forwarding database from source MAC addresses observed on ingress frames. This meets the stated need for ethernet source-mac learning.

Incorrect Answers

A:

The longest-prefix matching scenario has a different requirement: IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. It does not directly meet the ethernet source-mac learning need in this question.

C:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the ethernet source-mac learning need in this question.

D:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the ethernet source-mac learning need in this question.

Question 17

A new Ethernet destination MAC address is absent from a switch's forwarding table. Which configuration or troubleshooting action most directly meets the need?

  1. Validate the path MTU and account for fragmentation or packet-size adjustment where supported.
  2. Classify the sequence as TCP's three-way connection handshake.
  3. Expect unknown unicast frames to be flooded within the VLAN until the destination MAC is learned.
  4. Use an active 0.0.0.0/0 default route toward the upstream gateway.

Explanation

Correct Answer

C:

A bridge cannot select one outgoing port for an unknown destination, so it floods eligible ports in that broadcast domain. This meets the stated need for unknown-unicast flooding.

Incorrect Answers

A:

The ipv4 packet mtu scenario has a different requirement: An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling. It does not directly meet the unknown-unicast flooding need in this question.

B:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the unknown-unicast flooding need in this question.

D:

The ipv4 default route scenario has a different requirement: The IPv4 default route matches any destination without a more-specific active prefix. It does not directly meet the unknown-unicast flooding need in this question.

Question 18

Within Networking Fundamentals, a Junos engineer proposes the following response: Expect unknown unicast frames to be flooded within the VLAN until the destination MAC is learned. Which concept or operating procedure is best illustrated?

  1. IPv4 packet MTU
  2. TCP three-way handshake
  3. IPv4 default route
  4. Unknown-unicast flooding

Explanation

Correct Answer

D:

A bridge cannot select one outgoing port for an unknown destination, so it floods eligible ports in that broadcast domain. This meets the stated need for unknown-unicast flooding.

Incorrect Answers

A:

The ipv4 packet mtu scenario has a different requirement: An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling. It does not directly meet the unknown-unicast flooding need in this question.

B:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the unknown-unicast flooding need in this question.

C:

The ipv4 default route scenario has a different requirement: The IPv4 default route matches any destination without a more-specific active prefix. It does not directly meet the unknown-unicast flooding need in this question.

Question 19

A new Ethernet destination MAC address is absent from a switch's forwarding table. The proposed response is: Expect unknown unicast frames to be flooded within the VLAN until the destination MAC is learned. Which explanation most accurately supports this response?

  1. An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling.
  2. The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established.
  3. A bridge cannot select one outgoing port for an unknown destination, so it floods eligible ports in that broadcast domain.
  4. The IPv4 default route matches any destination without a more-specific active prefix.

Explanation

Correct Answer

C:

A bridge cannot select one outgoing port for an unknown destination, so it floods eligible ports in that broadcast domain. This meets the stated need for unknown-unicast flooding.

Incorrect Answers

A:

The ipv4 packet mtu scenario has a different requirement: An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling. It does not directly meet the unknown-unicast flooding need in this question.

B:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the unknown-unicast flooding need in this question.

D:

The ipv4 default route scenario has a different requirement: The IPv4 default route matches any destination without a more-specific active prefix. It does not directly meet the unknown-unicast flooding need in this question.

Question 20

Within Networking Fundamentals, a technician selects this approach: Expect unknown unicast frames to be flooded within the VLAN until the destination MAC is learned. Which original requirement or fault would most directly justify it?

  1. A new Ethernet destination MAC address is absent from a switch's forwarding table.
  2. A large packet repeatedly fails across a link with an MTU smaller than its total size.
  3. A packet capture shows SYN, SYN-ACK, and ACK before payload exchange.
  4. A branch router has no more specific route for a public destination but has an upstream Internet gateway.

Explanation

Correct Answer

A:

A bridge cannot select one outgoing port for an unknown destination, so it floods eligible ports in that broadcast domain. This meets the stated need for unknown-unicast flooding.

Incorrect Answers

B:

The ipv4 packet mtu scenario has a different requirement: An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling. It does not directly meet the unknown-unicast flooding need in this question.

C:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the unknown-unicast flooding need in this question.

D:

The ipv4 default route scenario has a different requirement: The IPv4 default route matches any destination without a more-specific active prefix. It does not directly meet the unknown-unicast flooding need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests