Question 260
A router has subinterfaces for VLANs 10 and 20 over one 802.1Q tagged uplink. After the change, which result is most relevant to the original failure?
Explanation
Correct Answer
The intended action is: Configure matching tagged subinterfaces and appropriate per-VLAN IP gateways. This works because router-on-a-stick uses VLAN tags to route separate Layer 2 segments on one physical link.
Incorrect Answers
This choice would test a different networking condition: A router receives both /25 and /24 routes from the same protocol for a test address inside the /25. Its related action is: Select the /25 longest-prefix route regardless of the /24 having a lower metric.
This choice would test a different networking condition: An edge router has a static route to 203.0.113.0/24 but the remote network moves and the static next hop no longer exists. Its related action is: Replace the stale static next hop or adopt an appropriate dynamic routing process for changing connectivity.
This choice would test a different networking condition: A route table has 10.5.0.0/16 via Router A and 10.5.20.0/24 via Router B for destination 10.5.20.17. Its related action is: Forward using the longest-prefix matching /24 route through Router B.