McAfee-Secured Website

Exam Bundle

Exam Code: N10-009

Exam Name CompTIA Network+

Certification Provider: CompTIA

Corresponding Certification: CompTIA Network+

CompTIA N10-009 Bundle $44.99

100% CompTIA N10-009 Guaranteed Success With Testking Training Materials

Get Real N10-009 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    N10-009 Questions & Answers

    768 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual N10-009 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • N10-009 Video Course

    N10-009 Video Course

    240 Video Lectures

    N10-009 Video Course is developed by CompTIA Professionals to help you pass the N10-009 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA Network+ exam.
  • Study Guide

    N10-009 Study Guide

    128 PDF Pages

    Developed by industry experts, this 128-page guide spells out in painstaking detail all of the information you need to ace N10-009 exam.

CompTIA Network+ (N10-009) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    768 Questions

    $124.99
  • N10-009 Video Course

    Video Course

    240 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    128 PDF Pages

    $29.99

CompTIA N10-009 Practice Test 25

Question 240

An operations team wants independent accounting of administrator commands on network devices beyond wireless access checks. Which post-change test best demonstrates that the problem is resolved?

  1. A path capture contains no readable configuration secrets and the archive remains encrypted.
  2. Admin clients reject an untrusted impersonator while connecting successfully to managed devices.
  3. Test commands receive expected permit/deny outcomes and produce attributable accounting records.
  4. The risk record correctly separates the defect, attacker capability and potential business harm.

Explanation

Correct Answer

C:

The intended action is: Configure a suitable TACACS+ management-AAA solution with command authorization and accounting where supported. This works because tACACS+ commonly supports granular device administration AAA, unlike generic connectivity controls.

Incorrect Answers

A:

This choice would test a different networking condition: A finance office encrypts stored router configuration backups but sends the same files over plaintext FTP. Its related action is: Protect configuration files in transit using authenticated encryption as well as storage encryption.

B:

This choice would test a different networking condition: A site uses a self-signed management certificate on every router without distributing trusted anchors. Its related action is: Deploy a managed PKI/trusted certificate process and validate endpoint identities.

D:

This choice would test a different networking condition: A security trainee calls a vulnerable router a 'threat' and an exploit attempt a 'risk'. Its related action is: Distinguish vulnerabilities, threats, exploits and likelihood-impact risk in incident classification.

Question 241

A staff member suspects a listening service is reachable from an untrusted network segment. Which verification finding would support closing this network issue?

  1. The expected endpoint appears as ESTABLISHED with the correct destination port.
  2. The corrected IP maps consistently to the authorized interface across hosts.
  3. The prohibited port is unreachable from the test segment while authorized sessions succeed.
  4. The test identifies the exact faulty pair and a replacement passes verification.

Explanation

Correct Answer

C:

The intended action is: Use an authorized limited port/connectivity test and verify firewall state and service listener. This works because port testing establishes observable service exposure but does not prove broader application security.

Incorrect Answers

A:

This choice would test a different networking condition: A Windows client can reach a host but wants to see which TCP connections are established to that server. Its related action is: Inspect netstat or PowerShell Get-NetTCPConnection for local ports and states.

B:

This choice would test a different networking condition: A local switch may have the wrong MAC neighbor associated with a duplicate IPv4 address. Its related action is: Check ARP/neighbor cache and correlate MAC learning information on the switch.

D:

This choice would test a different networking condition: A field installer must determine whether a copper cable is open, shorted or miswired. Its related action is: Use a cable wiremap/continuity tester or qualifying cable certifier.

Question 242

A resolver returns stale DNS records and the engineer wants the authoritative answer, not the browser's cached entry. What observation most directly validates the chosen network solution?

  1. The expected endpoint appears as ESTABLISHED with the correct destination port.
  2. Path output identifies the suspect hop while independent tests account for filtered ICMP responses.
  3. The test identifies the exact faulty pair and a replacement passes verification.
  4. The authoritative response matches the configured record while cache TTL explains the difference.

Explanation

Correct Answer

D:

The intended action is: Use dig or nslookup against a chosen authoritative DNS server and compare recursive results. This works because direct DNS queries help separate zone contents from caching behavior.

Incorrect Answers

A:

This choice would test a different networking condition: A Windows client can reach a host but wants to see which TCP connections are established to that server. Its related action is: Inspect netstat or PowerShell Get-NetTCPConnection for local ports and states.

B:

This choice would test a different networking condition: A remote application fails across several routers and an engineer needs to locate the first hop where the path changes. Its related action is: Use traceroute/tracert and corroborating router path information.

C:

This choice would test a different networking condition: A field installer must determine whether a copper cable is open, shorted or miswired. Its related action is: Use a cable wiremap/continuity tester or qualifying cable certifier.

Question 243

A DFS-sensitive 5-GHz WLAN drops briefly when radar detection forces a channel change. What acceptance result confirms the specified networking requirement is met?

  1. Guests see the portal and cannot reach staff VLANs; staff authenticate through managed credentials.
  2. Standard clients associate to the managed AP and reach the routed network with proper credentials.
  3. AP logs show compliant channel moves and clients recover through the supported transition process.
  4. Roaming clients observe one SSID and distinct BSSIDs without unnecessary reconnections.

Explanation

Correct Answer

C:

The intended action is: Plan for dynamic frequency selection and regulatory channel constraints, including 802.11h behavior. This works because dFS requires vacating specified channels on radar detection in regulated bands.

Incorrect Answers

A:

This choice would test a different networking condition: A restaurant guest WLAN requires a terms-of-use prompt before internet access but employees need certificate authentication. Its related action is: Use separate guest captive portal and enterprise-authenticated employee SSIDs with segmented paths.

B:

This choice would test a different networking condition: A field crew uses client devices in ad hoc mode expecting them to act as normal managed infrastructure WLANs. Its related action is: Deploy an infrastructure-mode AP when clients need managed distribution system access.

D:

This choice would test a different networking condition: Users walk between multiple APs with the same SSID but support mistakes the radio BSSID for the network name. Its related action is: Distinguish SSID network identity from per-radio BSSID and document the enterprise ESS design.

Question 244

A building cable passes continuity but gives intermittent link loss whenever a door closes on the cable. Which verification finding would support closing this network issue?

  1. Repeated door operation no longer changes link state or error counters.
  2. Late collisions and frame errors stop rising after correction.
  3. Both peers establish carrier with correct fiber mapping.
  4. Receive power falls within the supported range and error rate stabilizes.

Explanation

Correct Answer

A:

The intended action is: Correct the mechanical pinch and replace damaged cable while preserving bend radius. This works because stress can cause intermittent conductor or optical faults not evident in a static wiremap.

Incorrect Answers

B:

This choice would test a different networking condition: A switch port negotiates half duplex while the host uses full duplex and many late collisions appear. Its related action is: Match compatible speed/duplex configuration or restore correct autonegotiation.

C:

This choice would test a different networking condition: A network rack uses two identical fiber pairs but one has transmit fibers crossed into transmit on the peer. Its related action is: Correct TX-to-RX polarity and test both directions.

D:

This choice would test a different networking condition: A single-mode circuit receives far more optical power than its short-reach receiver allows after amplifier work. Its related action is: Validate receive-power limits and use an approved attenuator or correct optic to avoid overload.

Question 245

A local switch may have the wrong MAC neighbor associated with a duplicate IPv4 address. After the change, which result is most relevant to the original failure?

  1. The corrected IP maps consistently to the authorized interface across hosts.
  2. Repeated measurements correlate degraded performance to a consistent segment rather than an isolated ICMP filter.
  3. The updated heat map identifies interfering channels and verifies improved signal quality.
  4. The authoritative response matches the configured record while cache TTL explains the difference.

Explanation

Correct Answer

A:

The intended action is: Check ARP/neighbor cache and correlate MAC learning information on the switch. This works because neighbor tables show the IP-to-hardware mapping used for local delivery.

Incorrect Answers

B:

This choice would test a different networking condition: A WAN circuit shows different latency on each branch and operators need round-trip loss over many intermediate hops. Its related action is: Use pathping or sustained traceroute-style probes with awareness of ICMP rate limiting.

C:

This choice would test a different networking condition: A Wi-Fi team needs to locate nearby co-channel APs and compare signal strength across meeting rooms. Its related action is: Use an authorized Wi-Fi analyzer to survey channels, RSSI and utilization.

D:

This choice would test a different networking condition: A resolver returns stale DNS records and the engineer wants the authoritative answer, not the browser's cached entry. Its related action is: Use dig or nslookup against a chosen authoritative DNS server and compare recursive results.

Question 246

A network closet uses consumer power strips despite multiple high-watt switches and UPS loads. What is the most appropriate network configuration or troubleshooting action for this requirement?

  1. Confirm rack-unit height, device depth, front/rear service clearance and cable management before mounting.
  2. Document the intermediate distribution frame and its cross-connect to the main distribution frame.
  3. Design a rated rack PDU, UPS and circuit load distribution within electrical limits.
  4. Route the fiber in protected pathways with appropriate bend radius and strain relief.

Explanation

Correct Answer

C:

This action addresses the specific requirement because overloaded circuits and unsuitable strips create availability and fire risks. The independent acceptance check is: An electrical load assessment and controlled failover show safe operation within ratings.

Incorrect Answers

A:

This action addresses a different situation: A network rack is too shallow for new deep switches, and front cables block airflow. It would not directly resolve the current network requirement because overloaded circuits and unsuitable strips create availability and fire risks.

B:

This action addresses a different situation: An IDF on an upper floor connects horizontal cable runs but its uplink to MDF is unlabeled. It would not directly resolve the current network requirement because overloaded circuits and unsuitable strips create availability and fire risks.

D:

This action addresses a different situation: A new fiber run passes directly through an unprotected door hinge and repeatedly fails inspection. It would not directly resolve the current network requirement because overloaded circuits and unsuitable strips create availability and fire risks.

Question 247

A technician needs to confirm whether a local host can reach its default gateway at all. Which measured outcome provides the strongest evidence of success?

  1. The test identifies the exact faulty pair and a replacement passes verification.
  2. Measured dBm values fall within the vendor's acceptable receiver range.
  3. Repeated measurements correlate degraded performance to a consistent segment rather than an isolated ICMP filter.
  4. Gateway replies and local link state align with the expected network path.

Explanation

Correct Answer

D:

The intended action is: Use ping with the gateway IP and inspect interface/address status. This works because an ICMP echo test is a quick basic reachability check, subject to firewall behavior.

Incorrect Answers

A:

This choice would test a different networking condition: A field installer must determine whether a copper cable is open, shorted or miswired. Its related action is: Use a cable wiremap/continuity tester or qualifying cable certifier.

B:

This choice would test a different networking condition: A fiber uplink reports optical alarms and the team needs receive/transmit power rather than generic ping. Its related action is: Use a calibrated optical power meter and known transceiver specifications.

C:

This choice would test a different networking condition: A WAN circuit shows different latency on each branch and operators need round-trip loss over many intermediate hops. Its related action is: Use pathping or sustained traceroute-style probes with awareness of ICMP rate limiting.

Question 248

A switch's 10-Gbps port has the correct fiber but incompatible SR optics on one side and LR optics on the other. Which verification finding would support closing this network issue?

  1. The optical link negotiates at 10 Gbps and stays within link-budget limits.
  2. Return loss and interface errors meet the approved optical acceptance targets.
  3. NEXT measurements and throughput pass the required category test.
  4. The AP port negotiates the intended multigig speed without errors.

Explanation

Correct Answer

A:

The intended action is: Install matched, vendor-supported optics for the same wavelength and fiber type. This works because sR and LR modules are not interchangeable simply because both indicate 10 Gbps.

Incorrect Answers

B:

This choice would test a different networking condition: A fiber patch has acceptable insertion loss but high optical return loss due to a damaged polished end. Its related action is: Repair or replace the defective connector and verify return-loss specifications.

C:

This choice would test a different networking condition: A cable label says Cat6 but the run's near-end crosstalk fails at high frequency. Its related action is: Diagnose pair twist integrity and termination quality, then recertify or replace the link.

D:

This choice would test a different networking condition: A 2.5-Gbps access point uplink falls back to 100 Mbps over an old two-pair cable. Its related action is: Install a certified four-pair cable and verify endpoint/switch multigig capability.

Question 249

Two warehouses 400 meters apart have clear line of sight and need a stable wireless bridge. Which solution best satisfies the technical constraint without introducing unrelated changes?

  1. Select a narrower channel width where survey evidence favors reuse over peak PHY rate.
  2. Select an autonomous or locally capable AP deployment model with maintainable local security settings.
  3. Reduce unnecessary wireless backhaul hops or use wired uplinks where possible.
  4. Align directional antennas for a point-to-point link using appropriate regulatory power and fade margin.

Explanation

Correct Answer

D:

This action addresses the specific requirement because directional gain improves focus and link budget for a fixed endpoint pair. The independent acceptance check is: Link margin and bidirectional throughput meet the intended long-distance requirement.

Incorrect Answers

A:

This action addresses a different situation: A crowded 5-GHz office increases channel width to 160 MHz and sees fewer viable nonoverlapping channels. It would not directly resolve the current network requirement because directional gain improves focus and link budget for a fixed endpoint pair.

B:

This action addresses a different situation: A standalone remote-office AP must operate without controller connectivity for months. It would not directly resolve the current network requirement because directional gain improves focus and link budget for a fixed endpoint pair.

C:

This action addresses a different situation: A mesh WLAN has too many repeaters in series and throughput falls at the far end. It would not directly resolve the current network requirement because directional gain improves focus and link budget for a fixed endpoint pair.

Question 250

A technician needs to confirm whether a local host can reach its default gateway at all. Which solution best satisfies the technical constraint without introducing unrelated changes?

  1. Inspect ipconfig/ifconfig or ip address plus route print/ip route for addresses and default route.
  2. Use an authorized Wi-Fi analyzer to survey channels, RSSI and utilization.
  3. Use an authorized limited port/connectivity test and verify firewall state and service listener.
  4. Use ping with the gateway IP and inspect interface/address status.

Explanation

Correct Answer

D:

This action addresses the specific requirement because an ICMP echo test is a quick basic reachability check, subject to firewall behavior. The independent acceptance check is: Gateway replies and local link state align with the expected network path.

Incorrect Answers

A:

This action addresses a different situation: An administrator suspects a wrong gateway address is causing all off-subnet traffic to fail. It would not directly resolve the current network requirement because an ICMP echo test is a quick basic reachability check, subject to firewall behavior.

B:

This action addresses a different situation: A Wi-Fi team needs to locate nearby co-channel APs and compare signal strength across meeting rooms. It would not directly resolve the current network requirement because an ICMP echo test is a quick basic reachability check, subject to firewall behavior.

C:

This action addresses a different situation: A staff member suspects a listening service is reachable from an untrusted network segment. It would not directly resolve the current network requirement because an ICMP echo test is a quick basic reachability check, subject to firewall behavior.