McAfee-Secured Website

Exam Bundle

Exam Code: N10-009

Exam Name CompTIA Network+

Certification Provider: CompTIA

Corresponding Certification: CompTIA Network+

CompTIA N10-009 Bundle $44.99

100% CompTIA N10-009 Guaranteed Success With Testking Training Materials

Get Real N10-009 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    N10-009 Questions & Answers

    768 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual N10-009 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • N10-009 Video Course

    N10-009 Video Course

    240 Video Lectures

    N10-009 Video Course is developed by CompTIA Professionals to help you pass the N10-009 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA Network+ exam.
  • Study Guide

    N10-009 Study Guide

    128 PDF Pages

    Developed by industry experts, this 128-page guide spells out in painstaking detail all of the information you need to ace N10-009 exam.

CompTIA Network+ (N10-009) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    768 Questions

    $124.99
  • N10-009 Video Course

    Video Course

    240 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    128 PDF Pages

    $29.99

CompTIA N10-009 Practice Test 28

Question 270

A research cluster has direct links between all critical nodes to eliminate a single central switch dependency. What is the most appropriate network configuration or troubleshooting action for this requirement?

  1. Evaluate a full or partial mesh topology based on required alternate paths and port cost.
  2. Distinguish east-west data-center flows from north-south external-boundary flows.
  3. Preserve distinct access, distribution and core functions with appropriate routing boundaries.
  4. Use a spine-leaf fabric design with bounded hops and appropriate equal-cost paths.

Explanation

Correct Answer

A:

This action addresses the specific requirement because mesh increases path redundancy at the expense of links and operational complexity. The independent acceptance check is: The defined node-to-node routes survive an individual interconnect failure.

Incorrect Answers

B:

This action addresses a different situation: A security dashboard misclassifies internal service-to-service traffic as internet ingress and egress. It would not directly resolve the current network requirement because mesh increases path redundancy at the expense of links and operational complexity.

C:

This action addresses a different situation: A campus has separate access, distribution and core tiers and needs scalable routed aggregation. It would not directly resolve the current network requirement because mesh increases path redundancy at the expense of links and operational complexity.

D:

This action addresses a different situation: A data center runs many east-west server transactions and wants predictable leaf-to-leaf paths at scale. It would not directly resolve the current network requirement because mesh increases path redundancy at the expense of links and operational complexity.

Question 271

An IP phone and desktop share one switch access port but voice must receive separate VLAN policy. What acceptance result confirms the specified networking requirement is met?

  1. Phone frames appear in the voice VLAN while the PC remains in its data VLAN.
  2. The intended link is forwarding and the redundant path is safely controlled after cabling repair.
  3. The mismatch warning clears and untagged test frames map consistently.
  4. The guest cannot reach tagged internal VLANs while approved access traffic works.

Explanation

Correct Answer

A:

The intended action is: Configure a supported voice VLAN and data access VLAN with LLDP-MED or equivalent phone discovery. This works because voice VLAN tagging separates phone traffic without requiring a second physical desk port.

Incorrect Answers

B:

This choice would test a different networking condition: Two access switches have redundant uplinks but spanning tree blocks both expected paths due to mis-wired loops. Its related action is: Audit the physical topology and STP root/port roles before overriding loop prevention.

C:

This choice would test a different networking condition: Two trunk peers use different native VLANs, allowing untagged frames to land in the wrong segment. Its related action is: Set matching native VLAN policy on both ends and limit unused VLAN exposure.

D:

This choice would test a different networking condition: A switch port unexpectedly forwards tagged frames from a guest laptop configured as an access endpoint. Its related action is: Force access mode and suitable VLAN and disable unwanted dynamic trunk negotiation.

Question 272

A WPA2-Enterprise SSID uses a RADIUS certificate that clients do not validate. Which post-change test best demonstrates that the problem is resolved?

  1. Link margin and bidirectional throughput meet the intended long-distance requirement.
  2. RSSI and roaming tests meet targets across the intended public area.
  3. AP logs show compliant channel moves and clients recover through the supported transition process.
  4. A fake RADIUS endpoint is rejected and authorized network authentication succeeds.

Explanation

Correct Answer

D:

The intended action is: Enforce trusted server certificate validation in supplicants and correct RADIUS/EAP provisioning. This works because without server identity validation clients can leak credentials to rogue authentication servers.

Incorrect Answers

A:

This choice would test a different networking condition: Two warehouses 400 meters apart have clear line of sight and need a stable wireless bridge. Its related action is: Align directional antennas for a point-to-point link using appropriate regulatory power and fade margin.

B:

This choice would test a different networking condition: A shopping mall wants broad coverage from APs mounted in corridors rather than a focused building-to-building link. Its related action is: Use suitable omnidirectional antennas and validate signal coverage with a site survey.

C:

This choice would test a different networking condition: A DFS-sensitive 5-GHz WLAN drops briefly when radar detection forces a channel change. Its related action is: Plan for dynamic frequency selection and regulatory channel constraints, including 802.11h behavior.

Question 273

Network technicians use SNMPv2c 'public' and permit remote configuration from any VLAN. Which solution best satisfies the technical constraint without introducing unrelated changes?

  1. Apply a secure device baseline, change default credentials and disable unneeded listeners and ports.
  2. Enforce 802.1X network access control and restrict ports by authenticated identity and posture.
  3. Segment IoT/OT and general IT systems into enforced trust zones with monitored permitted flows.
  4. Restrict management sources and replace weak community access with SNMPv3 where supported.

Explanation

Correct Answer

D:

This action addresses the specific requirement because unauthenticated/readable management data increases discovery and modification risk. The independent acceptance check is: An unapproved VLAN cannot query devices while approved authenticated polling succeeds.

Incorrect Answers

A:

This action addresses a different situation: A core switch has factory-default credentials and unused services enabled even though it carries sensitive traffic. It would not directly resolve the current network requirement because unauthenticated/readable management data increases discovery and modification risk.

B:

This action addresses a different situation: A switch port serving an untrusted kiosk can plug into a sensitive VLAN when an employee swaps the cable. It would not directly resolve the current network requirement because unauthenticated/readable management data increases discovery and modification risk.

C:

This action addresses a different situation: A manufacturing site puts cameras, industrial controllers, and office laptops on one Layer 2 broadcast domain. It would not directly resolve the current network requirement because unauthenticated/readable management data increases discovery and modification risk.

Question 274

A core switch has factory-default credentials and unused services enabled even though it carries sensitive traffic. What is the most appropriate network configuration or troubleshooting action for this requirement?

  1. Segment IoT/OT and general IT systems into enforced trust zones with monitored permitted flows.
  2. Publish the specific API through a restricted reverse proxy or application gateway rather than wide routed VPN access.
  3. Apply a secure device baseline, change default credentials and disable unneeded listeners and ports.
  4. Apply appropriate port-security MAC limits and violation response.

Explanation

Correct Answer

C:

This action addresses the specific requirement because unneeded management services and default secrets expand the attack surface. The independent acceptance check is: A scan shows only approved services and factory credentials no longer work.

Incorrect Answers

A:

This action addresses a different situation: A manufacturing site puts cameras, industrial controllers, and office laptops on one Layer 2 broadcast domain. It would not directly resolve the current network requirement because unneeded management services and default secrets expand the attack surface.

B:

This action addresses a different situation: A company must allow an external supplier to query one HTTPS API but not browse the whole private network. It would not directly resolve the current network requirement because unneeded management services and default secrets expand the attack surface.

D:

This action addresses a different situation: A guest access port learns hundreds of MAC addresses behind an unauthorized unmanaged switch. It would not directly resolve the current network requirement because unneeded management services and default secrets expand the attack surface.

Question 275

A website has low throughput only during asymmetric traffic across a stateful firewall pair. What is the most appropriate network configuration or troubleshooting action for this requirement?

  1. Determine whether queue congestion or capacity is the cause and adjust shaping or upgrade capacity.
  2. Correct return-path symmetry and state synchronization where required.
  3. Validate path TCP option handling and allow supported window scaling without compromising policy.
  4. Check tunnel overhead and end-to-end path MTU, then adjust MSS or MTU appropriately.

Explanation

Correct Answer

B:

This action addresses the specific requirement because stateful inspection may drop packets when forward/reverse flows traverse unsynchronized devices. The independent acceptance check is: Both directions follow accepted firewall state and sessions remain stable under load.

Incorrect Answers

A:

This action addresses a different situation: An ISP reports 1% packet loss only at peak traffic, and firewall drop queues spike at the same time. It would not directly resolve the current network requirement because stateful inspection may drop packets when forward/reverse flows traverse unsynchronized devices.

C:

This action addresses a different situation: A user experiences slow downloads because a firewall blocks TCP window scaling options on long-delay links. It would not directly resolve the current network requirement because stateful inspection may drop packets when forward/reverse flows traverse unsynchronized devices.

D:

This action addresses a different situation: A firewall logs many small packets dropped after a tunnel was added, especially with the DF bit set. It would not directly resolve the current network requirement because stateful inspection may drop packets when forward/reverse flows traverse unsynchronized devices.

Question 276

A network switch has no usable IP configuration after a factory reset, so remote SSH cannot yet work. What should the network administrator implement first to meet this requirement?

  1. Use authenticated client-to-site VPN with suitable MFA and endpoint policy.
  2. Use an authenticated local console connection to establish bootstrap management and then enable secure remote access.
  3. Provide a clientless portal or application access gateway if the application supports it.
  4. Use a supported API/automation interface with authenticated scoped access when available.

Explanation

Correct Answer

B:

This action addresses the specific requirement because initial console access can configure networking before in-band management becomes available. The independent acceptance check is: The switch receives a reachable management address, and authorized SSH works after setup.

Incorrect Answers

A:

This action addresses a different situation: Remote staff need a VPN client that exposes authorized internal subnets only after user and device verification. It would not directly resolve the current network requirement because initial console access can configure networking before in-band management becomes available.

C:

This action addresses a different situation: A contractor needs browser-only access to a specific internal dashboard without a full routed VPN connection. It would not directly resolve the current network requirement because initial console access can configure networking before in-band management becomes available.

D:

This action addresses a different situation: Operations needs to update switch VLANs using automation and asks whether a GUI screen scraper is a reliable integration. It would not directly resolve the current network requirement because initial console access can configure networking before in-band management becomes available.

Question 277

A branch router learns an EIGRP route but the design team claims it is simply a variant of OSPF link-state. What should the network administrator implement first to meet this requirement?

  1. Treat EIGRP as its own advanced distance-vector routing protocol and verify its learned successors and metrics.
  2. Evaluate an appropriate IGP such as OSPF or EIGRP for internal reachability and verify neighbor failure detection.
  3. Replace the stale static next hop or adopt an appropriate dynamic routing process for changing connectivity.
  4. Validate FHRP virtual MAC behavior, gratuitous ARP and switch learning during failover.

Explanation

Correct Answer

A:

This action addresses the specific requirement because eIGRP uses DUAL-based neighbor and route computation rather than OSPF's link-state LSDB. The independent acceptance check is: The EIGRP topology shows a valid successor while OSPF LSDB state is not assumed.

Incorrect Answers

B:

This action addresses a different situation: An enterprise wants routing changes to converge automatically after a branch circuit fails but has only static routes and no tracking. It would not directly resolve the current network requirement because eIGRP uses DUAL-based neighbor and route computation rather than OSPF's link-state LSDB.

C:

This action addresses a different situation: An edge router has a static route to 203.0.113.0/24 but the remote network moves and the static next hop no longer exists. It would not directly resolve the current network requirement because eIGRP uses DUAL-based neighbor and route computation rather than OSPF's link-state LSDB.

D:

This action addresses a different situation: A campus default gateway VIP fails over but client ARP caches still point to the old hardware address. It would not directly resolve the current network requirement because eIGRP uses DUAL-based neighbor and route computation rather than OSPF's link-state LSDB.

Question 278

Users can reach the local subnet but not other prefixes after the gateway IP was mistyped in DHCP option 3. After the change, which result is most relevant to the original failure?

  1. A connected client receives the intended routes and resolves internal names.
  2. New leases show the valid gateway and remote routes respond.
  3. A client on the remote subnet receives a lease after relay restoration.
  4. Lease free-count stays healthy through peak arrival and valid clients get addresses.

Explanation

Correct Answer

B:

The intended action is: Correct the distributed DHCP default-router option and renew client leases. This works because wrong default gateway directs off-subnet packets to an unusable first hop.

Incorrect Answers

A:

This choice would test a different networking condition: A VPN tunnel is up but clients cannot use applications because permitted routes were never pushed to remote devices. Its related action is: Verify client route distribution, split/full tunnel rules and internal DNS settings.

C:

This choice would test a different networking condition: A DHCP relay was removed during switch replacement and only the remote subnet cannot obtain leases. Its related action is: Restore DHCP relay forwarding for the routed VLAN and validate option delivery.

D:

This choice would test a different networking condition: A DHCP scope exhausts addresses at 9 a.m. because wireless guests retain week-long leases after leaving. Its related action is: Resize the eligible scope or shorten guest lease duration to reflect churn.

Question 279

A WAN circuit shows different latency on each branch and operators need round-trip loss over many intermediate hops. What is the most appropriate network configuration or troubleshooting action for this requirement?

  1. Inspect netstat or PowerShell Get-NetTCPConnection for local ports and states.
  2. Use pathping or sustained traceroute-style probes with awareness of ICMP rate limiting.
  3. Use dig or nslookup against a chosen authoritative DNS server and compare recursive results.
  4. Use traceroute/tracert and corroborating router path information.

Explanation

Correct Answer

B:

This action addresses the specific requirement because multiple-hop loss/latency tools provide hints to link conditions beyond a single echo. The independent acceptance check is: Repeated measurements correlate degraded performance to a consistent segment rather than an isolated ICMP filter.

Incorrect Answers

A:

This action addresses a different situation: A Windows client can reach a host but wants to see which TCP connections are established to that server. It would not directly resolve the current network requirement because multiple-hop loss/latency tools provide hints to link conditions beyond a single echo.

C:

This action addresses a different situation: A resolver returns stale DNS records and the engineer wants the authoritative answer, not the browser's cached entry. It would not directly resolve the current network requirement because multiple-hop loss/latency tools provide hints to link conditions beyond a single echo.

D:

This action addresses a different situation: A remote application fails across several routers and an engineer needs to locate the first hop where the path changes. It would not directly resolve the current network requirement because multiple-hop loss/latency tools provide hints to link conditions beyond a single echo.

Question 280

A DNS response is truncated over UDP and the firewall currently blocks TCP 53 fallback to the resolver. Which solution best satisfies the technical constraint without introducing unrelated changes?

  1. Use the provider's supported authenticated submission service, typically TCP 587 with TLS.
  2. Use SFTP over SSH on TCP 22 rather than FTP control/data ports.
  3. Configure SNMP traps/informs toward the manager using the supported notification destination such as UDP 162.
  4. Allow authorized DNS TCP 53 fallback in addition to ordinary UDP 53 queries.

Explanation

Correct Answer

D:

This action addresses the specific requirement because dNS may require TCP for truncated responses and certain larger exchanges even when typical queries use UDP. The independent acceptance check is: An oversized test query succeeds on TCP 53 while ordinary UDP name lookups also work.

Incorrect Answers

A:

This action addresses a different situation: A mail server submits authenticated outgoing user mail to its provider and port 25 is filtered for clients. It would not directly resolve the current network requirement because dNS may require TCP for truncated responses and certain larger exchanges even when typical queries use UDP.

B:

This action addresses a different situation: A file-management utility must upload securely over one SSH-based channel and avoid unencrypted FTP credentials. It would not directly resolve the current network requirement because dNS may require TCP for truncated responses and certain larger exchanges even when typical queries use UDP.

C:

This action addresses a different situation: Monitoring software polls counters on UDP 161 while urgent alarms are expected to appear automatically. It would not directly resolve the current network requirement because dNS may require TCP for truncated responses and certain larger exchanges even when typical queries use UDP.