McAfee-Secured Website

Exam Bundle

Exam Code: 220-1201

Exam Name CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

CompTIA 220-1201 Bundle $44.99

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    220-1201 Questions & Answers

    527 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 220-1201 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 220-1201 Video Course

    220-1201 Video Course

    106 Video Lectures

    220-1201 Video Course is developed by CompTIA Professionals to help you pass the 220-1201 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA A+ Certification Exam: Core 1 exam.
  • Study Guide

    220-1201 Study Guide

    2615 PDF Pages

    Developed by industry experts, this 2615-page guide spells out in painstaking detail all of the information you need to ace 220-1201 exam.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    527 Questions

    $124.99
  • 220-1201 Video Course

    Video Course

    106 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    2615 PDF Pages

    $29.99

CompTIA 220-1201 Practice Test 48

Question 470

An SSD exposes a SMART critical warning and a rapidly rising media error count. After the appropriate change, which observation BEST verifies the intended result?

  1. The installed operating system launches without disk replacement.
  2. Multiple cold boots enumerate the NVMe drive consistently.
  3. The new drive completes diagnostics without critical media errors.
  4. Firmware detects the drive at the intended interface.

Explanation

Correct Answer

C:

SMART health warnings can precede irreversible storage failure. The outcome “The new drive completes diagnostics without critical media errors.” verifies the action “Back up immediately and replace the suspect SSD.” for this situation: An SSD exposes a SMART critical warning and a rapidly rising media error count.

Incorrect Answers

A:

Firmware enumeration proves a storage device exists; wrong boot selection can still stop startup. For the situation described—An SSD exposes a SMART critical warning and a rapidly rising media error count—this would not demonstrate the specified intervention. The relevant evidence is “The new drive completes diagnostics without critical media errors.”.

B:

Poor electrical seating can produce intermittent storage detection. For the situation described—An SSD exposes a SMART critical warning and a rapidly rising media error count—this would not demonstrate the specified intervention. The relevant evidence is “The new drive completes diagnostics without critical media errors.”.

D:

M.2 slot shape does not guarantee NVMe protocol support. For the situation described—An SSD exposes a SMART critical warning and a rapidly rising media error count—this would not demonstrate the specified intervention. The relevant evidence is “The new drive completes diagnostics without critical media errors.”.

Question 471

A new PC sees an SSD in UEFI but reports no bootable device because the boot order targets an empty disk. Which action is MOST appropriate for this situation?

  1. Repair the correct UEFI/EFI boot configuration on the cloned device.
  2. Restore partition metadata or the system image from a trusted backup.
  3. Rebalance I/O or upgrade the storage performance tier for the workload.
  4. Select the correct OS boot entry in firmware.

Explanation

Correct Answer

D:

Firmware enumeration proves a storage device exists; wrong boot selection can still stop startup. In this situation—A new PC sees an SSD in UEFI but reports no bootable device because the boot order targets an empty disk—the right response is “Select the correct OS boot entry in firmware.”. A confirming result would be “The installed operating system launches without disk replacement.”.

Incorrect Answers

A:

Cloning data does not always preserve a working firmware boot registration. That does not directly address the condition described—A new PC sees an SSD in UEFI but reports no bootable device because the boot order targets an empty disk. “Select the correct OS boot entry in firmware.” is the appropriate response because firmware enumeration proves a storage device exists; wrong boot selection can still stop startup.

B:

Logical corruption can prevent boot without physical media failure. That does not directly address the condition described—A new PC sees an SSD in UEFI but reports no bootable device because the boot order targets an empty disk. “Select the correct OS boot entry in firmware.” is the appropriate response because firmware enumeration proves a storage device exists; wrong boot selection can still stop startup.

C:

Healthy disks can still be performance-bottlenecked by excessive demand. That does not directly address the condition described—A new PC sees an SSD in UEFI but reports no bootable device because the boot order targets an empty disk. “Select the correct OS boot entry in firmware.” is the appropriate response because firmware enumeration proves a storage device exists; wrong boot selection can still stop startup.

Question 472

A new PC sees an SSD in UEFI but reports no bootable device because the boot order targets an empty disk. After the appropriate change, which observation BEST verifies the intended result?

  1. The installed operating system launches without disk replacement.
  2. The correct partitions mount and file-system checks pass.
  3. The new drive completes diagnostics without critical media errors.
  4. Recovered files validate against backup hashes on healthy storage.

Explanation

Correct Answer

A:

Firmware enumeration proves a storage device exists; wrong boot selection can still stop startup. The outcome “The installed operating system launches without disk replacement.” verifies the action “Select the correct OS boot entry in firmware.” for this situation: A new PC sees an SSD in UEFI but reports no bootable device because the boot order targets an empty disk.

Incorrect Answers

B:

Logical corruption can prevent boot without physical media failure. For the situation described—A new PC sees an SSD in UEFI but reports no bootable device because the boot order targets an empty disk—this would not demonstrate the specified intervention. The relevant evidence is “The installed operating system launches without disk replacement.”.

C:

SMART health warnings can precede irreversible storage failure. For the situation described—A new PC sees an SSD in UEFI but reports no bootable device because the boot order targets an empty disk—this would not demonstrate the specified intervention. The relevant evidence is “The installed operating system launches without disk replacement.”.

D:

Mechanical clicking plus failed reads suggests physical drive failure. For the situation described—A new PC sees an SSD in UEFI but reports no bootable device because the boot order targets an empty disk—this would not demonstrate the specified intervention. The relevant evidence is “The installed operating system launches without disk replacement.”.

Question 473

A workstation boots slowly after an NVMe drive was accidentally installed into a SATA-only M.2 slot and is not detected. Which action is MOST appropriate for this situation?

  1. Power off, reseat and secure the NVMe module.
  2. Repair the correct UEFI/EFI boot configuration on the cloned device.
  3. Move to a compatible PCIe/NVMe slot or use a supported device.
  4. Provide the supported power feed or powered enclosure.

Explanation

Correct Answer

C:

M.2 slot shape does not guarantee NVMe protocol support. In this situation—A workstation boots slowly after an NVMe drive was accidentally installed into a SATA-only M.2 slot and is not detected—the right response is “Move to a compatible PCIe/NVMe slot or use a supported device.”. A confirming result would be “Firmware detects the drive at the intended interface.”.

Incorrect Answers

A:

Poor electrical seating can produce intermittent storage detection. That does not directly address the condition described—A workstation boots slowly after an NVMe drive was accidentally installed into a SATA-only M.2 slot and is not detected. “Move to a compatible PCIe/NVMe slot or use a supported device.” is the appropriate response because m.2 slot shape does not guarantee NVMe protocol support.

B:

Cloning data does not always preserve a working firmware boot registration. That does not directly address the condition described—A workstation boots slowly after an NVMe drive was accidentally installed into a SATA-only M.2 slot and is not detected. “Move to a compatible PCIe/NVMe slot or use a supported device.” is the appropriate response because m.2 slot shape does not guarantee NVMe protocol support.

D:

Spinning disks can draw more power than a weak USB port supplies. That does not directly address the condition described—A workstation boots slowly after an NVMe drive was accidentally installed into a SATA-only M.2 slot and is not detected. “Move to a compatible PCIe/NVMe slot or use a supported device.” is the appropriate response because m.2 slot shape does not guarantee NVMe protocol support.

Question 474

A workstation boots slowly after an NVMe drive was accidentally installed into a SATA-only M.2 slot and is not detected. After the appropriate change, which observation BEST verifies the intended result?

  1. Multiple cold boots enumerate the NVMe drive consistently.
  2. The drive remains mounted during spin-up and sustained transfers.
  3. The cloned system boots and accessible files match the source.
  4. Firmware detects the drive at the intended interface.

Explanation

Correct Answer

D:

M.2 slot shape does not guarantee NVMe protocol support. The outcome “Firmware detects the drive at the intended interface.” verifies the action “Move to a compatible PCIe/NVMe slot or use a supported device.” for this situation: A workstation boots slowly after an NVMe drive was accidentally installed into a SATA-only M.2 slot and is not detected.

Incorrect Answers

A:

Poor electrical seating can produce intermittent storage detection. For the situation described—A workstation boots slowly after an NVMe drive was accidentally installed into a SATA-only M.2 slot and is not detected—this would not demonstrate the specified intervention. The relevant evidence is “Firmware detects the drive at the intended interface.”.

B:

Spinning disks can draw more power than a weak USB port supplies. For the situation described—A workstation boots slowly after an NVMe drive was accidentally installed into a SATA-only M.2 slot and is not detected—this would not demonstrate the specified intervention. The relevant evidence is “Firmware detects the drive at the intended interface.”.

C:

Cloning data does not always preserve a working firmware boot registration. For the situation described—A workstation boots slowly after an NVMe drive was accidentally installed into a SATA-only M.2 slot and is not detected—this would not demonstrate the specified intervention. The relevant evidence is “Firmware detects the drive at the intended interface.”.

Question 475

A RAID 1 controller reports one failed member while the volume remains online. Which action is MOST appropriate for this situation?

  1. Replace the failed member and allow a monitored mirror rebuild.
  2. Stop rebuild attempts and use backups or specialist recovery.
  3. Rebalance I/O or upgrade the storage performance tier for the workload.
  4. Keep remaining healthy disks online until the rebuild completes and investigate non-disruptively.

Explanation

Correct Answer

A:

RAID 1 tolerates a single member failure through mirroring. In this situation—A RAID 1 controller reports one failed member while the volume remains online—the right response is “Replace the failed member and allow a monitored mirror rebuild.”. A confirming result would be “The array returns to healthy mirrored status with data intact.”.

Incorrect Answers

B:

RAID 5 parity cannot reconstruct data after two independent member failures. That does not directly address the condition described—A RAID 1 controller reports one failed member while the volume remains online. “Replace the failed member and allow a monitored mirror rebuild.” is the appropriate response because rAID 1 tolerates a single member failure through mirroring.

C:

Healthy disks can still be performance-bottlenecked by excessive demand. That does not directly address the condition described—A RAID 1 controller reports one failed member while the volume remains online. “Replace the failed member and allow a monitored mirror rebuild.” is the appropriate response because rAID 1 tolerates a single member failure through mirroring.

D:

Removing additional members during a degraded rebuild risks data loss. That does not directly address the condition described—A RAID 1 controller reports one failed member while the volume remains online. “Replace the failed member and allow a monitored mirror rebuild.” is the appropriate response because rAID 1 tolerates a single member failure through mirroring.

Question 476

A RAID 1 controller reports one failed member while the volume remains online. After the appropriate change, which observation BEST verifies the intended result?

  1. Restored data passes application integrity checks on a new healthy array.
  2. The array returns to healthy mirrored status with data intact.
  3. Recovered files validate against backup hashes on healthy storage.
  4. The controller reports a completed healthy rebuild.

Explanation

Correct Answer

B:

RAID 1 tolerates a single member failure through mirroring. The outcome “The array returns to healthy mirrored status with data intact.” verifies the action “Replace the failed member and allow a monitored mirror rebuild.” for this situation: A RAID 1 controller reports one failed member while the volume remains online.

Incorrect Answers

A:

RAID 5 parity cannot reconstruct data after two independent member failures. For the situation described—A RAID 1 controller reports one failed member while the volume remains online—this would not demonstrate the specified intervention. The relevant evidence is “The array returns to healthy mirrored status with data intact.”.

C:

Mechanical clicking plus failed reads suggests physical drive failure. For the situation described—A RAID 1 controller reports one failed member while the volume remains online—this would not demonstrate the specified intervention. The relevant evidence is “The array returns to healthy mirrored status with data intact.”.

D:

Removing additional members during a degraded rebuild risks data loss. For the situation described—A RAID 1 controller reports one failed member while the volume remains online—this would not demonstrate the specified intervention. The relevant evidence is “The array returns to healthy mirrored status with data intact.”.

Question 477

A RAID 5 controller warns of two failed disks and the volume is offline. Which action is MOST appropriate for this situation?

  1. Move to a compatible PCIe/NVMe slot or use a supported device.
  2. Stop rebuild attempts and use backups or specialist recovery.
  3. Repair the correct UEFI/EFI boot configuration on the cloned device.
  4. Rebalance I/O or upgrade the storage performance tier for the workload.

Explanation

Correct Answer

B:

RAID 5 parity cannot reconstruct data after two independent member failures. In this situation—A RAID 5 controller warns of two failed disks and the volume is offline—the right response is “Stop rebuild attempts and use backups or specialist recovery.”. A confirming result would be “Restored data passes application integrity checks on a new healthy array.”.

Incorrect Answers

A:

M.2 slot shape does not guarantee NVMe protocol support. That does not directly address the condition described—A RAID 5 controller warns of two failed disks and the volume is offline. “Stop rebuild attempts and use backups or specialist recovery.” is the appropriate response because rAID 5 parity cannot reconstruct data after two independent member failures.

C:

Cloning data does not always preserve a working firmware boot registration. That does not directly address the condition described—A RAID 5 controller warns of two failed disks and the volume is offline. “Stop rebuild attempts and use backups or specialist recovery.” is the appropriate response because rAID 5 parity cannot reconstruct data after two independent member failures.

D:

Healthy disks can still be performance-bottlenecked by excessive demand. That does not directly address the condition described—A RAID 5 controller warns of two failed disks and the volume is offline. “Stop rebuild attempts and use backups or specialist recovery.” is the appropriate response because rAID 5 parity cannot reconstruct data after two independent member failures.

Question 478

A RAID 5 controller warns of two failed disks and the volume is offline. After the appropriate change, which observation BEST verifies the intended result?

  1. Restored data passes application integrity checks on a new healthy array.
  2. The array returns to healthy mirrored status with data intact.
  3. The controller reports a completed healthy rebuild.
  4. Measured I/O latency and queue depth fall under representative transactions.

Explanation

Correct Answer

A:

RAID 5 parity cannot reconstruct data after two independent member failures. The outcome “Restored data passes application integrity checks on a new healthy array.” verifies the action “Stop rebuild attempts and use backups or specialist recovery.” for this situation: A RAID 5 controller warns of two failed disks and the volume is offline.

Incorrect Answers

B:

RAID 1 tolerates a single member failure through mirroring. For the situation described—A RAID 5 controller warns of two failed disks and the volume is offline—this would not demonstrate the specified intervention. The relevant evidence is “Restored data passes application integrity checks on a new healthy array.”.

C:

Removing additional members during a degraded rebuild risks data loss. For the situation described—A RAID 5 controller warns of two failed disks and the volume is offline—this would not demonstrate the specified intervention. The relevant evidence is “Restored data passes application integrity checks on a new healthy array.”.

D:

Healthy disks can still be performance-bottlenecked by excessive demand. For the situation described—A RAID 5 controller warns of two failed disks and the volume is offline—this would not demonstrate the specified intervention. The relevant evidence is “Restored data passes application integrity checks on a new healthy array.”.

Question 479

A storage array reports rebuild in progress and a technician proposes removing another apparently slow disk. Which action is MOST appropriate for this situation?

  1. Rebalance I/O or upgrade the storage performance tier for the workload.
  2. Stop stressing the drive and recover data from backups or specialist service.
  3. Stop rebuild attempts and use backups or specialist recovery.
  4. Keep remaining healthy disks online until the rebuild completes and investigate non-disruptively.

Explanation

Correct Answer

D:

Removing additional members during a degraded rebuild risks data loss. In this situation—A storage array reports rebuild in progress and a technician proposes removing another apparently slow disk—the right response is “Keep remaining healthy disks online until the rebuild completes and investigate non-disruptively.”. A confirming result would be “The controller reports a completed healthy rebuild.”.

Incorrect Answers

A:

Healthy disks can still be performance-bottlenecked by excessive demand. That does not directly address the condition described—A storage array reports rebuild in progress and a technician proposes removing another apparently slow disk. “Keep remaining healthy disks online until the rebuild completes and investigate non-disruptively.” is the appropriate response because removing additional members during a degraded rebuild risks data loss.

B:

Mechanical clicking plus failed reads suggests physical drive failure. That does not directly address the condition described—A storage array reports rebuild in progress and a technician proposes removing another apparently slow disk. “Keep remaining healthy disks online until the rebuild completes and investigate non-disruptively.” is the appropriate response because removing additional members during a degraded rebuild risks data loss.

C:

RAID 5 parity cannot reconstruct data after two independent member failures. That does not directly address the condition described—A storage array reports rebuild in progress and a technician proposes removing another apparently slow disk. “Keep remaining healthy disks online until the rebuild completes and investigate non-disruptively.” is the appropriate response because removing additional members during a degraded rebuild risks data loss.

Question 480

A storage array reports rebuild in progress and a technician proposes removing another apparently slow disk. After the appropriate change, which observation BEST verifies the intended result?

  1. Recovered files validate against backup hashes on healthy storage.
  2. The controller reports a completed healthy rebuild.
  3. Measured I/O latency and queue depth fall under representative transactions.
  4. The array returns to healthy mirrored status with data intact.

Explanation

Correct Answer

B:

Removing additional members during a degraded rebuild risks data loss. The outcome “The controller reports a completed healthy rebuild.” verifies the action “Keep remaining healthy disks online until the rebuild completes and investigate non-disruptively.” for this situation: A storage array reports rebuild in progress and a technician proposes removing another apparently slow disk.

Incorrect Answers

A:

Mechanical clicking plus failed reads suggests physical drive failure. For the situation described—A storage array reports rebuild in progress and a technician proposes removing another apparently slow disk—this would not demonstrate the specified intervention. The relevant evidence is “The controller reports a completed healthy rebuild.”.

C:

Healthy disks can still be performance-bottlenecked by excessive demand. For the situation described—A storage array reports rebuild in progress and a technician proposes removing another apparently slow disk—this would not demonstrate the specified intervention. The relevant evidence is “The controller reports a completed healthy rebuild.”.

D:

RAID 1 tolerates a single member failure through mirroring. For the situation described—A storage array reports rebuild in progress and a technician proposes removing another apparently slow disk—this would not demonstrate the specified intervention. The relevant evidence is “The controller reports a completed healthy rebuild.”.