McAfee-Secured Website

Exam Bundle

Exam Code: 350-901

Exam Name Designing, Deploying, and Managing Network Automation Systems

Certification Provider: Cisco

Corresponding Certification: DevNet Professional

Cisco 350-901 Bundle $25.00

100% Cisco 350-901 Guaranteed Success With Testking Training Materials

Get Real 350-901 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-901 Questions & Answers

    604 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-901 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-901 Video Course

    350-901 Video Course

    106 Video Lectures

    350-901 Video Course is developed by Cisco Professionals to help you pass the 350-901 exam.

    Description

    This course will improve your knowledge and skills required to pass Designing, Deploying, and Managing Network Automation Systems exam.

Designing, Deploying, and Managing Network Automation Systems (350-901) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    604 Questions

    $124.99
  • 350-901 Video Course

    Video Course

    106 Video Lectures

    $39.99

Cisco 350-901 Practice Test 55

Question 540

A health information exchange is working on patient-record network access segmentation. A retrospective identifies: a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that no address conflicts appear in testbed interface and ARP data; flag recurrence if a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes.
  2. Check that lab reports explicitly separate functional validation from performance claims; flag recurrence if a CML test includes unsupported node throughput assumptions from physical hardware.
  3. Check that the lab endpoint returns the expected modeled management resource; flag recurrence if network automation runs successfully in production but fails in CML because modeled IOS XE nodes lack RESTCONF.
  4. Check that test execution waits for a ready topology and reports a bounded startup failure otherwise; flag recurrence if a CI job cannot access an isolated CML lab because virtual nodes are still booting.

Explanation

Correct Answer

A:

The check tests the restored condition, no address conflicts appear in testbed interface and ARP data, and explicitly flags a recurrence of a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes.

Incorrect Answers

B:

This guard monitors a different regression trigger: a CML test includes unsupported node throughput assumptions from physical hardware. It does not directly validate the recovery condition, no address conflicts appear in testbed interface and ARP data.

C:

This guard monitors a different regression trigger: network automation runs successfully in production but fails in CML because modeled IOS XE nodes lack RESTCONF. It does not directly validate the recovery condition, no address conflicts appear in testbed interface and ARP data.

D:

This guard monitors a different regression trigger: a CI job cannot access an isolated CML lab because virtual nodes are still booting. It does not directly validate the recovery condition, no address conflicts appear in testbed interface and ARP data.

Question 541

A port security operations center is working on security-reviewable AI-assisted network changes. During deployment, engineers cannot reproduce a routing lab after another team modifies base images. Which action most directly addresses this specific network automation problem?

  1. Model independent links/switches and inject a single-link failure.
  2. Reinitialize the CML topology and apply the intended baseline before each experiment.
  3. Correct the link endpoints and map them to the modeled interfaces.
  4. Pin known CML images and export a versioned lab definition.

Explanation

Correct Answer

D:

The observed failure is: engineers cannot reproduce a routing lab after another team modifies base images. The underlying cause is: lab node image versions are floating rather than fixed in the scenario specification. Verify that recreated nodes run identical images and baseline configurations.

Incorrect Answers

A:

This would address a different condition: a CML simulation claims redundancy although the backup path shares the same virtual switch. Here, the actual issue is: lab node image versions are floating rather than fixed in the scenario specification; it needs a scoped correction rather than this unrelated intervention.

B:

This would address a different condition: a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship. Here, the actual issue is: lab node image versions are floating rather than fixed in the scenario specification; it needs a scoped correction rather than this unrelated intervention.

C:

This would address a different condition: a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port. Here, the actual issue is: lab node image versions are floating rather than fixed in the scenario specification; it needs a scoped correction rather than this unrelated intervention.

Question 542

A port security operations center is working on security-reviewable AI-assisted network changes. The team found that engineers cannot reproduce a routing lab after another team modifies base images. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. Traffic remains routed through the intended independent recovery path.
  2. CML adjacency and device interface counters reflect the intended peer.
  3. Recreated nodes run identical images and baseline configurations.
  4. Fresh runs reproduce expected adjacency changes without prior-test state.

Explanation

Correct Answer

C:

This evidence directly verifies the scoped correction, pin known CML images and export a versioned lab definition, for the underlying issue: lab node image versions are floating rather than fixed in the scenario specification. It should be checked against actual device or pipeline output.

Incorrect Answers

A:

This would confirm recovery from a CML simulation claims redundancy although the backup path shares the same virtual switch, not necessarily from the reported incident. For the specified issue the relevant confirmation is: recreated nodes run identical images and baseline configurations.

B:

This would confirm recovery from a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port, not necessarily from the reported incident. For the specified issue the relevant confirmation is: recreated nodes run identical images and baseline configurations.

D:

This would confirm recovery from a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship, not necessarily from the reported incident. For the specified issue the relevant confirmation is: recreated nodes run identical images and baseline configurations.

Question 543

A port security operations center is working on security-reviewable AI-assisted network changes. The team observes that engineers cannot reproduce a routing lab after another team modifies base images. Which underlying mechanism best explains this failure?

  1. Lab node image versions are floating rather than fixed in the scenario specification.
  2. The emulated interface mapping does not match the intended topology.
  3. The modeled topology fails to represent independent failure domains.
  4. The simulation is not reset to a known initial state between test runs.

Explanation

Correct Answer

A:

This mechanism explains the reported observation, engineers cannot reproduce a routing lab after another team modifies base images. The targeted response is to pin known CML images and export a versioned lab definition; the expected confirming result is that recreated nodes run identical images and baseline configurations.

Incorrect Answers

B:

That mechanism fits a different symptom: a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port. The reported condition instead points to lab node image versions are floating rather than fixed in the scenario specification.

C:

That mechanism fits a different symptom: a CML simulation claims redundancy although the backup path shares the same virtual switch. The reported condition instead points to lab node image versions are floating rather than fixed in the scenario specification.

D:

That mechanism fits a different symptom: a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship. The reported condition instead points to lab node image versions are floating rather than fixed in the scenario specification.

Question 544

A port security operations center is working on security-reviewable AI-assisted network changes. A retrospective identifies: engineers cannot reproduce a routing lab after another team modifies base images. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that fresh runs reproduce expected adjacency changes without prior-test state; flag recurrence if a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship.
  2. Check that recreated nodes run identical images and baseline configurations; flag recurrence if engineers cannot reproduce a routing lab after another team modifies base images.
  3. Check that CML adjacency and device interface counters reflect the intended peer; flag recurrence if a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port.
  4. Check that traffic remains routed through the intended independent recovery path; flag recurrence if a CML simulation claims redundancy although the backup path shares the same virtual switch.

Explanation

Correct Answer

B:

The check tests the restored condition, recreated nodes run identical images and baseline configurations, and explicitly flags a recurrence of engineers cannot reproduce a routing lab after another team modifies base images.

Incorrect Answers

A:

This guard monitors a different regression trigger: a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship. It does not directly validate the recovery condition, recreated nodes run identical images and baseline configurations.

C:

This guard monitors a different regression trigger: a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port. It does not directly validate the recovery condition, recreated nodes run identical images and baseline configurations.

D:

This guard monitors a different regression trigger: a CML simulation claims redundancy although the backup path shares the same virtual switch. It does not directly validate the recovery condition, recreated nodes run identical images and baseline configurations.

Question 545

A national logistics provider is working on branch edge routers and Catalyst switching upgrades. During deployment, a CML topology is reachable only from the runner's local machine. Which action most directly addresses this specific network automation problem?

  1. Model and validate explicit management reachability for the isolated runner.
  2. Model both active and standby paths and inject supported link failures.
  3. Reset to a clean baseline and version-pin boot configuration for each run.
  4. Generate and check distinct node/IP mappings before node bootstrap.

Explanation

Correct Answer

A:

The observed failure is: a CML topology is reachable only from the runner's local machine. The underlying cause is: test network external connector/NAT settings are omitted from CI runtime. Verify that authorized CI runner reaches only the designated CML management endpoints.

Incorrect Answers

B:

This would address a different condition: a lab deployment tests only the primary WAN interface and misses a standby-path regression. Here, the actual issue is: test network external connector/NAT settings are omitted from CI runtime; it needs a scoped correction rather than this unrelated intervention.

C:

This would address a different condition: a simulated configuration works only when test nodes have stale startup configs. Here, the actual issue is: test network external connector/NAT settings are omitted from CI runtime; it needs a scoped correction rather than this unrelated intervention.

D:

This would address a different condition: a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes. Here, the actual issue is: test network external connector/NAT settings are omitted from CI runtime; it needs a scoped correction rather than this unrelated intervention.

Question 546

A national logistics provider is working on branch edge routers and Catalyst switching upgrades. The team found that a CML topology is reachable only from the runner's local machine. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. Simulated service remains reachable on failover according to the approved design.
  2. Identical source inputs produce repeatable results in fresh labs.
  3. No address conflicts appear in testbed interface and ARP data.
  4. Authorized CI runner reaches only the designated CML management endpoints.

Explanation

Correct Answer

D:

This evidence directly verifies the scoped correction, model and validate explicit management reachability for the isolated runner, for the underlying issue: test network external connector/NAT settings are omitted from CI runtime. It should be checked against actual device or pipeline output.

Incorrect Answers

A:

This would confirm recovery from a lab deployment tests only the primary WAN interface and misses a standby-path regression, not necessarily from the reported incident. For the specified issue the relevant confirmation is: authorized CI runner reaches only the designated CML management endpoints.

B:

This would confirm recovery from a simulated configuration works only when test nodes have stale startup configs, not necessarily from the reported incident. For the specified issue the relevant confirmation is: authorized CI runner reaches only the designated CML management endpoints.

C:

This would confirm recovery from a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes, not necessarily from the reported incident. For the specified issue the relevant confirmation is: authorized CI runner reaches only the designated CML management endpoints.

Question 547

A national logistics provider is working on branch edge routers and Catalyst switching upgrades. The team observes that a CML topology is reachable only from the runner's local machine. Which underlying mechanism best explains this failure?

  1. Failure conditions are not represented in the simulation topology.
  2. Test network external connector/NAT settings are omitted from CI runtime.
  3. Address allocation is not validated against the modeled inventory.
  4. The lab template inherits undeclared persistent device state.

Explanation

Correct Answer

B:

This mechanism explains the reported observation, a CML topology is reachable only from the runner's local machine. The targeted response is to model and validate explicit management reachability for the isolated runner; the expected confirming result is that authorized CI runner reaches only the designated CML management endpoints.

Incorrect Answers

A:

That mechanism fits a different symptom: a lab deployment tests only the primary WAN interface and misses a standby-path regression. The reported condition instead points to test network external connector/NAT settings are omitted from CI runtime.

C:

That mechanism fits a different symptom: a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes. The reported condition instead points to test network external connector/NAT settings are omitted from CI runtime.

D:

That mechanism fits a different symptom: a simulated configuration works only when test nodes have stale startup configs. The reported condition instead points to test network external connector/NAT settings are omitted from CI runtime.

Question 548

A national logistics provider is working on branch edge routers and Catalyst switching upgrades. A retrospective identifies: a CML topology is reachable only from the runner's local machine. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that simulated service remains reachable on failover according to the approved design; flag recurrence if a lab deployment tests only the primary WAN interface and misses a standby-path regression.
  2. Check that no address conflicts appear in testbed interface and ARP data; flag recurrence if a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes.
  3. Check that authorized CI runner reaches only the designated CML management endpoints; flag recurrence if a CML topology is reachable only from the runner's local machine.
  4. Check that identical source inputs produce repeatable results in fresh labs; flag recurrence if a simulated configuration works only when test nodes have stale startup configs.

Explanation

Correct Answer

C:

The check tests the restored condition, authorized CI runner reaches only the designated CML management endpoints, and explicitly flags a recurrence of a CML topology is reachable only from the runner's local machine.

Incorrect Answers

A:

This guard monitors a different regression trigger: a lab deployment tests only the primary WAN interface and misses a standby-path regression. It does not directly validate the recovery condition, authorized CI runner reaches only the designated CML management endpoints.

B:

This guard monitors a different regression trigger: a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes. It does not directly validate the recovery condition, authorized CI runner reaches only the designated CML management endpoints.

D:

This guard monitors a different regression trigger: a simulated configuration works only when test nodes have stale startup configs. It does not directly validate the recovery condition, authorized CI runner reaches only the designated CML management endpoints.

Question 549

A public cloud connectivity integrator is working on hybrid enterprise WAN policy changes. During deployment, the team tests the desired routing state but has no failed-path or rollback assertions. Which action most directly addresses this specific network automation problem?

  1. Add negative/fault-injection tests and defined recovery checks to the CML scenario.
  2. Poll CML node and service readiness with timeouts before running change validation.
  3. Enable the supported RESTCONF service and verify image capabilities before tests.
  4. Pin known CML images and export a versioned lab definition.

Explanation

Correct Answer

A:

The observed failure is: the team tests the desired routing state but has no failed-path or rollback assertions. The underlying cause is: simulation only covers the normal healthy topology. Verify that simulated link failure and rollback both satisfy expected convergence criteria.

Incorrect Answers

B:

This would address a different condition: a CI job cannot access an isolated CML lab because virtual nodes are still booting. Here, the actual issue is: simulation only covers the normal healthy topology; it needs a scoped correction rather than this unrelated intervention.

C:

This would address a different condition: network automation runs successfully in production but fails in CML because modeled IOS XE nodes lack RESTCONF. Here, the actual issue is: simulation only covers the normal healthy topology; it needs a scoped correction rather than this unrelated intervention.

D:

This would address a different condition: engineers cannot reproduce a routing lab after another team modifies base images. Here, the actual issue is: simulation only covers the normal healthy topology; it needs a scoped correction rather than this unrelated intervention.

Question 550

A public cloud connectivity integrator is working on hybrid enterprise WAN policy changes. The team found that the team tests the desired routing state but has no failed-path or rollback assertions. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. Test execution waits for a ready topology and reports a bounded startup failure otherwise.
  2. Recreated nodes run identical images and baseline configurations.
  3. The lab endpoint returns the expected modeled management resource.
  4. Simulated link failure and rollback both satisfy expected convergence criteria.

Explanation

Correct Answer

D:

This evidence directly verifies the scoped correction, add negative/fault-injection tests and defined recovery checks to the CML scenario, for the underlying issue: simulation only covers the normal healthy topology. It should be checked against actual device or pipeline output.

Incorrect Answers

A:

This would confirm recovery from a CI job cannot access an isolated CML lab because virtual nodes are still booting, not necessarily from the reported incident. For the specified issue the relevant confirmation is: simulated link failure and rollback both satisfy expected convergence criteria.

B:

This would confirm recovery from engineers cannot reproduce a routing lab after another team modifies base images, not necessarily from the reported incident. For the specified issue the relevant confirmation is: simulated link failure and rollback both satisfy expected convergence criteria.

C:

This would confirm recovery from network automation runs successfully in production but fails in CML because modeled IOS XE nodes lack RESTCONF, not necessarily from the reported incident. For the specified issue the relevant confirmation is: simulated link failure and rollback both satisfy expected convergence criteria.