McAfee-Secured Website

Exam Bundle

Exam Code: 350-901

Exam Name Designing, Deploying, and Managing Network Automation Systems

Certification Provider: Cisco

Corresponding Certification: DevNet Professional

Cisco 350-901 Bundle $25.00

100% Cisco 350-901 Guaranteed Success With Testking Training Materials

Get Real 350-901 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-901 Questions & Answers

    604 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-901 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-901 Video Course

    350-901 Video Course

    106 Video Lectures

    350-901 Video Course is developed by Cisco Professionals to help you pass the 350-901 exam.

    Description

    This course will improve your knowledge and skills required to pass Designing, Deploying, and Managing Network Automation Systems exam.

Designing, Deploying, and Managing Network Automation Systems (350-901) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    604 Questions

    $124.99
  • 350-901 Video Course

    Video Course

    106 Video Lectures

    $39.99

Cisco 350-901 Practice Test 53

Question 520

A payment-switch service team is working on sensitive network secrets and signed deployment artifacts. A retrospective identifies: a GitLab pipeline downloads untrusted dependencies during a production release job. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that unapproved pipeline runs stop before issuing device write operations; flag recurrence if a pipeline enters deploy when the intended manual approval gate has not been passed.
  2. Check that a test fork cannot access secrets or trigger protected environment changes; flag recurrence if a new GitLab pipeline exposes production controller credentials to arbitrary feature branches.
  3. Check that production deploy uses only checksummed artifacts from the approved build stage; flag recurrence if a GitLab pipeline downloads untrusted dependencies during a production release job.
  4. Check that invalid YANG fixture changes block deployment in CI; flag recurrence if tests pass on code changes that do not include newly added YANG fixtures.

Explanation

Correct Answer

C:

The check tests the restored condition, production deploy uses only checksummed artifacts from the approved build stage, and explicitly flags a recurrence of a GitLab pipeline downloads untrusted dependencies during a production release job.

Incorrect Answers

A:

This guard monitors a different regression trigger: a pipeline enters deploy when the intended manual approval gate has not been passed. It does not directly validate the recovery condition, production deploy uses only checksummed artifacts from the approved build stage.

B:

This guard monitors a different regression trigger: a new GitLab pipeline exposes production controller credentials to arbitrary feature branches. It does not directly validate the recovery condition, production deploy uses only checksummed artifacts from the approved build stage.

D:

This guard monitors a different regression trigger: tests pass on code changes that do not include newly added YANG fixtures. It does not directly validate the recovery condition, production deploy uses only checksummed artifacts from the approved build stage.

Question 521

An international freight forwarder is working on standardized routed network deployment approvals. During deployment, a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port. Which action most directly addresses this specific network automation problem?

  1. Add negative/fault-injection tests and defined recovery checks to the CML scenario.
  2. Generate and check distinct node/IP mappings before node bootstrap.
  3. Model both active and standby paths and inject supported link failures.
  4. Correct the link endpoints and map them to the modeled interfaces.

Explanation

Correct Answer

D:

The observed failure is: a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port. The underlying cause is: the emulated interface mapping does not match the intended topology. Verify that CML adjacency and device interface counters reflect the intended peer.

Incorrect Answers

A:

This would address a different condition: the team tests the desired routing state but has no failed-path or rollback assertions. Here, the actual issue is: the emulated interface mapping does not match the intended topology; it needs a scoped correction rather than this unrelated intervention.

B:

This would address a different condition: a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes. Here, the actual issue is: the emulated interface mapping does not match the intended topology; it needs a scoped correction rather than this unrelated intervention.

C:

This would address a different condition: a lab deployment tests only the primary WAN interface and misses a standby-path regression. Here, the actual issue is: the emulated interface mapping does not match the intended topology; it needs a scoped correction rather than this unrelated intervention.

Question 522

An international freight forwarder is working on standardized routed network deployment approvals. The team found that a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. CML adjacency and device interface counters reflect the intended peer.
  2. Simulated service remains reachable on failover according to the approved design.
  3. Simulated link failure and rollback both satisfy expected convergence criteria.
  4. No address conflicts appear in testbed interface and ARP data.

Explanation

Correct Answer

A:

This evidence directly verifies the scoped correction, correct the link endpoints and map them to the modeled interfaces, for the underlying issue: the emulated interface mapping does not match the intended topology. It should be checked against actual device or pipeline output.

Incorrect Answers

B:

This would confirm recovery from a lab deployment tests only the primary WAN interface and misses a standby-path regression, not necessarily from the reported incident. For the specified issue the relevant confirmation is: CML adjacency and device interface counters reflect the intended peer.

C:

This would confirm recovery from the team tests the desired routing state but has no failed-path or rollback assertions, not necessarily from the reported incident. For the specified issue the relevant confirmation is: CML adjacency and device interface counters reflect the intended peer.

D:

This would confirm recovery from a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes, not necessarily from the reported incident. For the specified issue the relevant confirmation is: CML adjacency and device interface counters reflect the intended peer.

Question 523

An international freight forwarder is working on standardized routed network deployment approvals. The team observes that a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port. Which underlying mechanism best explains this failure?

  1. Failure conditions are not represented in the simulation topology.
  2. The emulated interface mapping does not match the intended topology.
  3. Address allocation is not validated against the modeled inventory.
  4. Simulation only covers the normal healthy topology.

Explanation

Correct Answer

B:

This mechanism explains the reported observation, a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port. The targeted response is to correct the link endpoints and map them to the modeled interfaces; the expected confirming result is that CML adjacency and device interface counters reflect the intended peer.

Incorrect Answers

A:

That mechanism fits a different symptom: a lab deployment tests only the primary WAN interface and misses a standby-path regression. The reported condition instead points to the emulated interface mapping does not match the intended topology.

C:

That mechanism fits a different symptom: a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes. The reported condition instead points to the emulated interface mapping does not match the intended topology.

D:

That mechanism fits a different symptom: the team tests the desired routing state but has no failed-path or rollback assertions. The reported condition instead points to the emulated interface mapping does not match the intended topology.

Question 524

An international freight forwarder is working on standardized routed network deployment approvals. A retrospective identifies: a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that no address conflicts appear in testbed interface and ARP data; flag recurrence if a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes.
  2. Check that simulated link failure and rollback both satisfy expected convergence criteria; flag recurrence if the team tests the desired routing state but has no failed-path or rollback assertions.
  3. Check that CML adjacency and device interface counters reflect the intended peer; flag recurrence if a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port.
  4. Check that simulated service remains reachable on failover according to the approved design; flag recurrence if a lab deployment tests only the primary WAN interface and misses a standby-path regression.

Explanation

Correct Answer

C:

The check tests the restored condition, CML adjacency and device interface counters reflect the intended peer, and explicitly flags a recurrence of a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port.

Incorrect Answers

A:

This guard monitors a different regression trigger: a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes. It does not directly validate the recovery condition, CML adjacency and device interface counters reflect the intended peer.

B:

This guard monitors a different regression trigger: the team tests the desired routing state but has no failed-path or rollback assertions. It does not directly validate the recovery condition, CML adjacency and device interface counters reflect the intended peer.

D:

This guard monitors a different regression trigger: a lab deployment tests only the primary WAN interface and misses a standby-path regression. It does not directly validate the recovery condition, CML adjacency and device interface counters reflect the intended peer.

Question 525

A media broadcasting provider is working on studio uplinks and streaming-path configuration. During deployment, a simulated configuration works only when test nodes have stale startup configs. Which action most directly addresses this specific network automation problem?

  1. Poll CML node and service readiness with timeouts before running change validation.
  2. Pin known CML images and export a versioned lab definition.
  3. Scope CML tests to functional network logic and measure capacity on supported real gear.
  4. Reset to a clean baseline and version-pin boot configuration for each run.

Explanation

Correct Answer

D:

The observed failure is: a simulated configuration works only when test nodes have stale startup configs. The underlying cause is: the lab template inherits undeclared persistent device state. Verify that identical source inputs produce repeatable results in fresh labs.

Incorrect Answers

A:

This would address a different condition: a CI job cannot access an isolated CML lab because virtual nodes are still booting. Here, the actual issue is: the lab template inherits undeclared persistent device state; it needs a scoped correction rather than this unrelated intervention.

B:

This would address a different condition: engineers cannot reproduce a routing lab after another team modifies base images. Here, the actual issue is: the lab template inherits undeclared persistent device state; it needs a scoped correction rather than this unrelated intervention.

C:

This would address a different condition: a CML test includes unsupported node throughput assumptions from physical hardware. Here, the actual issue is: the lab template inherits undeclared persistent device state; it needs a scoped correction rather than this unrelated intervention.

Question 526

A media broadcasting provider is working on studio uplinks and streaming-path configuration. The team found that a simulated configuration works only when test nodes have stale startup configs. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. Recreated nodes run identical images and baseline configurations.
  2. Lab reports explicitly separate functional validation from performance claims.
  3. Identical source inputs produce repeatable results in fresh labs.
  4. Test execution waits for a ready topology and reports a bounded startup failure otherwise.

Explanation

Correct Answer

C:

This evidence directly verifies the scoped correction, reset to a clean baseline and version-pin boot configuration for each run, for the underlying issue: the lab template inherits undeclared persistent device state. It should be checked against actual device or pipeline output.

Incorrect Answers

A:

This would confirm recovery from engineers cannot reproduce a routing lab after another team modifies base images, not necessarily from the reported incident. For the specified issue the relevant confirmation is: identical source inputs produce repeatable results in fresh labs.

B:

This would confirm recovery from a CML test includes unsupported node throughput assumptions from physical hardware, not necessarily from the reported incident. For the specified issue the relevant confirmation is: identical source inputs produce repeatable results in fresh labs.

D:

This would confirm recovery from a CI job cannot access an isolated CML lab because virtual nodes are still booting, not necessarily from the reported incident. For the specified issue the relevant confirmation is: identical source inputs produce repeatable results in fresh labs.

Question 527

A media broadcasting provider is working on studio uplinks and streaming-path configuration. The team observes that a simulated configuration works only when test nodes have stale startup configs. Which underlying mechanism best explains this failure?

  1. The virtual simulator is used as a production performance benchmark.
  2. The lab template inherits undeclared persistent device state.
  3. Lab node image versions are floating rather than fixed in the scenario specification.
  4. Test orchestration begins before CML device readiness.

Explanation

Correct Answer

B:

This mechanism explains the reported observation, a simulated configuration works only when test nodes have stale startup configs. The targeted response is to reset to a clean baseline and version-pin boot configuration for each run; the expected confirming result is that identical source inputs produce repeatable results in fresh labs.

Incorrect Answers

A:

That mechanism fits a different symptom: a CML test includes unsupported node throughput assumptions from physical hardware. The reported condition instead points to the lab template inherits undeclared persistent device state.

C:

That mechanism fits a different symptom: engineers cannot reproduce a routing lab after another team modifies base images. The reported condition instead points to the lab template inherits undeclared persistent device state.

D:

That mechanism fits a different symptom: a CI job cannot access an isolated CML lab because virtual nodes are still booting. The reported condition instead points to the lab template inherits undeclared persistent device state.

Question 528

A media broadcasting provider is working on studio uplinks and streaming-path configuration. A retrospective identifies: a simulated configuration works only when test nodes have stale startup configs. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that identical source inputs produce repeatable results in fresh labs; flag recurrence if a simulated configuration works only when test nodes have stale startup configs.
  2. Check that lab reports explicitly separate functional validation from performance claims; flag recurrence if a CML test includes unsupported node throughput assumptions from physical hardware.
  3. Check that test execution waits for a ready topology and reports a bounded startup failure otherwise; flag recurrence if a CI job cannot access an isolated CML lab because virtual nodes are still booting.
  4. Check that recreated nodes run identical images and baseline configurations; flag recurrence if engineers cannot reproduce a routing lab after another team modifies base images.

Explanation

Correct Answer

A:

The check tests the restored condition, identical source inputs produce repeatable results in fresh labs, and explicitly flags a recurrence of a simulated configuration works only when test nodes have stale startup configs.

Incorrect Answers

B:

This guard monitors a different regression trigger: a CML test includes unsupported node throughput assumptions from physical hardware. It does not directly validate the recovery condition, identical source inputs produce repeatable results in fresh labs.

C:

This guard monitors a different regression trigger: a CI job cannot access an isolated CML lab because virtual nodes are still booting. It does not directly validate the recovery condition, identical source inputs produce repeatable results in fresh labs.

D:

This guard monitors a different regression trigger: engineers cannot reproduce a routing lab after another team modifies base images. It does not directly validate the recovery condition, identical source inputs produce repeatable results in fresh labs.

Question 529

A disaster recovery network group is working on tested failover topology automation. During deployment, network automation runs successfully in production but fails in CML because modeled IOS XE nodes lack RESTCONF. Which action most directly addresses this specific network automation problem?

  1. Correct the link endpoints and map them to the modeled interfaces.
  2. Model and validate explicit management reachability for the isolated runner.
  3. Reinitialize the CML topology and apply the intended baseline before each experiment.
  4. Enable the supported RESTCONF service and verify image capabilities before tests.

Explanation

Correct Answer

D:

The observed failure is: network automation runs successfully in production but fails in CML because modeled IOS XE nodes lack RESTCONF. The underlying cause is: the simulated images are not configured with the needed management API capability. Verify that the lab endpoint returns the expected modeled management resource.

Incorrect Answers

A:

This would address a different condition: a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port. Here, the actual issue is: the simulated images are not configured with the needed management API capability; it needs a scoped correction rather than this unrelated intervention.

B:

This would address a different condition: a CML topology is reachable only from the runner's local machine. Here, the actual issue is: the simulated images are not configured with the needed management API capability; it needs a scoped correction rather than this unrelated intervention.

C:

This would address a different condition: a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship. Here, the actual issue is: the simulated images are not configured with the needed management API capability; it needs a scoped correction rather than this unrelated intervention.

Question 530

A disaster recovery network group is working on tested failover topology automation. The team found that network automation runs successfully in production but fails in CML because modeled IOS XE nodes lack RESTCONF. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. The lab endpoint returns the expected modeled management resource.
  2. Fresh runs reproduce expected adjacency changes without prior-test state.
  3. Authorized CI runner reaches only the designated CML management endpoints.
  4. CML adjacency and device interface counters reflect the intended peer.

Explanation

Correct Answer

A:

This evidence directly verifies the scoped correction, enable the supported RESTCONF service and verify image capabilities before tests, for the underlying issue: the simulated images are not configured with the needed management API capability. It should be checked against actual device or pipeline output.

Incorrect Answers

B:

This would confirm recovery from a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship, not necessarily from the reported incident. For the specified issue the relevant confirmation is: the lab endpoint returns the expected modeled management resource.

C:

This would confirm recovery from a CML topology is reachable only from the runner's local machine, not necessarily from the reported incident. For the specified issue the relevant confirmation is: the lab endpoint returns the expected modeled management resource.

D:

This would confirm recovery from a CML test shows BGP down but the lab router's virtual link is connected to the wrong node port, not necessarily from the reported incident. For the specified issue the relevant confirmation is: the lab endpoint returns the expected modeled management resource.