McAfee-Secured Website

Exam Bundle

Exam Code: 350-901

Exam Name Designing, Deploying, and Managing Network Automation Systems

Certification Provider: Cisco

Corresponding Certification: DevNet Professional

Cisco 350-901 Bundle $25.00

100% Cisco 350-901 Guaranteed Success With Testking Training Materials

Get Real 350-901 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-901 Questions & Answers

    604 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-901 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-901 Video Course

    350-901 Video Course

    106 Video Lectures

    350-901 Video Course is developed by Cisco Professionals to help you pass the 350-901 exam.

    Description

    This course will improve your knowledge and skills required to pass Designing, Deploying, and Managing Network Automation Systems exam.

Designing, Deploying, and Managing Network Automation Systems (350-901) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    604 Questions

    $124.99
  • 350-901 Video Course

    Video Course

    106 Video Lectures

    $39.99

Cisco 350-901 Practice Test 57

Question 560

A metropolitan transit authority is working on Cisco controller-managed network configuration changes. A retrospective identifies: a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that identical source inputs produce repeatable results in fresh labs; flag recurrence if a simulated configuration works only when test nodes have stale startup configs.
  2. Check that no address conflicts appear in testbed interface and ARP data; flag recurrence if a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes.
  3. Check that fresh runs reproduce expected adjacency changes without prior-test state; flag recurrence if a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship.
  4. Check that simulated link failure and rollback both satisfy expected convergence criteria; flag recurrence if the team tests the desired routing state but has no failed-path or rollback assertions.

Explanation

Correct Answer

C:

The check tests the restored condition, fresh runs reproduce expected adjacency changes without prior-test state, and explicitly flags a recurrence of a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship.

Incorrect Answers

A:

This guard monitors a different regression trigger: a simulated configuration works only when test nodes have stale startup configs. It does not directly validate the recovery condition, fresh runs reproduce expected adjacency changes without prior-test state.

B:

This guard monitors a different regression trigger: a subnet automation test passes in CML but uses conflicting duplicate IP addresses between nodes. It does not directly validate the recovery condition, fresh runs reproduce expected adjacency changes without prior-test state.

D:

This guard monitors a different regression trigger: the team tests the desired routing state but has no failed-path or rollback assertions. It does not directly validate the recovery condition, fresh runs reproduce expected adjacency changes without prior-test state.

Question 561

A bank branch migration team is working on high-availability routing and authentication policies. During deployment, a lab deployment tests only the primary WAN interface and misses a standby-path regression. Which action most directly addresses this specific network automation problem?

  1. Pin known CML images and export a versioned lab definition.
  2. Model both active and standby paths and inject supported link failures.
  3. Enable the supported RESTCONF service and verify image capabilities before tests.
  4. Scope CML tests to functional network logic and measure capacity on supported real gear.

Explanation

Correct Answer

B:

The observed failure is: a lab deployment tests only the primary WAN interface and misses a standby-path regression. The underlying cause is: failure conditions are not represented in the simulation topology. Verify that simulated service remains reachable on failover according to the approved design.

Incorrect Answers

A:

This would address a different condition: engineers cannot reproduce a routing lab after another team modifies base images. Here, the actual issue is: failure conditions are not represented in the simulation topology; it needs a scoped correction rather than this unrelated intervention.

C:

This would address a different condition: network automation runs successfully in production but fails in CML because modeled IOS XE nodes lack RESTCONF. Here, the actual issue is: failure conditions are not represented in the simulation topology; it needs a scoped correction rather than this unrelated intervention.

D:

This would address a different condition: a CML test includes unsupported node throughput assumptions from physical hardware. Here, the actual issue is: failure conditions are not represented in the simulation topology; it needs a scoped correction rather than this unrelated intervention.

Question 562

A bank branch migration team is working on high-availability routing and authentication policies. The team found that a lab deployment tests only the primary WAN interface and misses a standby-path regression. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. Recreated nodes run identical images and baseline configurations.
  2. Lab reports explicitly separate functional validation from performance claims.
  3. Simulated service remains reachable on failover according to the approved design.
  4. The lab endpoint returns the expected modeled management resource.

Explanation

Correct Answer

C:

This evidence directly verifies the scoped correction, model both active and standby paths and inject supported link failures, for the underlying issue: failure conditions are not represented in the simulation topology. It should be checked against actual device or pipeline output.

Incorrect Answers

A:

This would confirm recovery from engineers cannot reproduce a routing lab after another team modifies base images, not necessarily from the reported incident. For the specified issue the relevant confirmation is: simulated service remains reachable on failover according to the approved design.

B:

This would confirm recovery from a CML test includes unsupported node throughput assumptions from physical hardware, not necessarily from the reported incident. For the specified issue the relevant confirmation is: simulated service remains reachable on failover according to the approved design.

D:

This would confirm recovery from network automation runs successfully in production but fails in CML because modeled IOS XE nodes lack RESTCONF, not necessarily from the reported incident. For the specified issue the relevant confirmation is: simulated service remains reachable on failover according to the approved design.

Question 563

A bank branch migration team is working on high-availability routing and authentication policies. The team observes that a lab deployment tests only the primary WAN interface and misses a standby-path regression. Which underlying mechanism best explains this failure?

  1. The simulated images are not configured with the needed management API capability.
  2. Lab node image versions are floating rather than fixed in the scenario specification.
  3. The virtual simulator is used as a production performance benchmark.
  4. Failure conditions are not represented in the simulation topology.

Explanation

Correct Answer

D:

This mechanism explains the reported observation, a lab deployment tests only the primary WAN interface and misses a standby-path regression. The targeted response is to model both active and standby paths and inject supported link failures; the expected confirming result is that simulated service remains reachable on failover according to the approved design.

Incorrect Answers

A:

That mechanism fits a different symptom: network automation runs successfully in production but fails in CML because modeled IOS XE nodes lack RESTCONF. The reported condition instead points to failure conditions are not represented in the simulation topology.

B:

That mechanism fits a different symptom: engineers cannot reproduce a routing lab after another team modifies base images. The reported condition instead points to failure conditions are not represented in the simulation topology.

C:

That mechanism fits a different symptom: a CML test includes unsupported node throughput assumptions from physical hardware. The reported condition instead points to failure conditions are not represented in the simulation topology.

Question 564

A bank branch migration team is working on high-availability routing and authentication policies. A retrospective identifies: a lab deployment tests only the primary WAN interface and misses a standby-path regression. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that simulated service remains reachable on failover according to the approved design; flag recurrence if a lab deployment tests only the primary WAN interface and misses a standby-path regression.
  2. Check that recreated nodes run identical images and baseline configurations; flag recurrence if engineers cannot reproduce a routing lab after another team modifies base images.
  3. Check that lab reports explicitly separate functional validation from performance claims; flag recurrence if a CML test includes unsupported node throughput assumptions from physical hardware.
  4. Check that the lab endpoint returns the expected modeled management resource; flag recurrence if network automation runs successfully in production but fails in CML because modeled IOS XE nodes lack RESTCONF.

Explanation

Correct Answer

A:

The check tests the restored condition, simulated service remains reachable on failover according to the approved design, and explicitly flags a recurrence of a lab deployment tests only the primary WAN interface and misses a standby-path regression.

Incorrect Answers

B:

This guard monitors a different regression trigger: engineers cannot reproduce a routing lab after another team modifies base images. It does not directly validate the recovery condition, simulated service remains reachable on failover according to the approved design.

C:

This guard monitors a different regression trigger: a CML test includes unsupported node throughput assumptions from physical hardware. It does not directly validate the recovery condition, simulated service remains reachable on failover according to the approved design.

D:

This guard monitors a different regression trigger: network automation runs successfully in production but fails in CML because modeled IOS XE nodes lack RESTCONF. It does not directly validate the recovery condition, simulated service remains reachable on failover according to the approved design.

Question 565

A regional technical college is working on Cisco Modeling Labs exercises for production change review. During deployment, a CI job cannot access an isolated CML lab because virtual nodes are still booting. Which action most directly addresses this specific network automation problem?

  1. Model and validate explicit management reachability for the isolated runner.
  2. Poll CML node and service readiness with timeouts before running change validation.
  3. Model independent links/switches and inject a single-link failure.
  4. Reinitialize the CML topology and apply the intended baseline before each experiment.

Explanation

Correct Answer

B:

The observed failure is: a CI job cannot access an isolated CML lab because virtual nodes are still booting. The underlying cause is: test orchestration begins before CML device readiness. Verify that test execution waits for a ready topology and reports a bounded startup failure otherwise.

Incorrect Answers

A:

This would address a different condition: a CML topology is reachable only from the runner's local machine. Here, the actual issue is: test orchestration begins before CML device readiness; it needs a scoped correction rather than this unrelated intervention.

C:

This would address a different condition: a CML simulation claims redundancy although the backup path shares the same virtual switch. Here, the actual issue is: test orchestration begins before CML device readiness; it needs a scoped correction rather than this unrelated intervention.

D:

This would address a different condition: a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship. Here, the actual issue is: test orchestration begins before CML device readiness; it needs a scoped correction rather than this unrelated intervention.

Question 566

A regional technical college is working on Cisco Modeling Labs exercises for production change review. The team found that a CI job cannot access an isolated CML lab because virtual nodes are still booting. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. Fresh runs reproduce expected adjacency changes without prior-test state.
  2. Traffic remains routed through the intended independent recovery path.
  3. Test execution waits for a ready topology and reports a bounded startup failure otherwise.
  4. Authorized CI runner reaches only the designated CML management endpoints.

Explanation

Correct Answer

C:

This evidence directly verifies the scoped correction, poll CML node and service readiness with timeouts before running change validation, for the underlying issue: test orchestration begins before CML device readiness. It should be checked against actual device or pipeline output.

Incorrect Answers

A:

This would confirm recovery from a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship, not necessarily from the reported incident. For the specified issue the relevant confirmation is: test execution waits for a ready topology and reports a bounded startup failure otherwise.

B:

This would confirm recovery from a CML simulation claims redundancy although the backup path shares the same virtual switch, not necessarily from the reported incident. For the specified issue the relevant confirmation is: test execution waits for a ready topology and reports a bounded startup failure otherwise.

D:

This would confirm recovery from a CML topology is reachable only from the runner's local machine, not necessarily from the reported incident. For the specified issue the relevant confirmation is: test execution waits for a ready topology and reports a bounded startup failure otherwise.

Question 567

A regional technical college is working on Cisco Modeling Labs exercises for production change review. The team observes that a CI job cannot access an isolated CML lab because virtual nodes are still booting. Which underlying mechanism best explains this failure?

  1. Test orchestration begins before CML device readiness.
  2. The simulation is not reset to a known initial state between test runs.
  3. The modeled topology fails to represent independent failure domains.
  4. Test network external connector/NAT settings are omitted from CI runtime.

Explanation

Correct Answer

A:

This mechanism explains the reported observation, a CI job cannot access an isolated CML lab because virtual nodes are still booting. The targeted response is to poll CML node and service readiness with timeouts before running change validation; the expected confirming result is that test execution waits for a ready topology and reports a bounded startup failure otherwise.

Incorrect Answers

B:

That mechanism fits a different symptom: a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship. The reported condition instead points to test orchestration begins before CML device readiness.

C:

That mechanism fits a different symptom: a CML simulation claims redundancy although the backup path shares the same virtual switch. The reported condition instead points to test orchestration begins before CML device readiness.

D:

That mechanism fits a different symptom: a CML topology is reachable only from the runner's local machine. The reported condition instead points to test orchestration begins before CML device readiness.

Question 568

A regional technical college is working on Cisco Modeling Labs exercises for production change review. A retrospective identifies: a CI job cannot access an isolated CML lab because virtual nodes are still booting. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that fresh runs reproduce expected adjacency changes without prior-test state; flag recurrence if a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship.
  2. Check that authorized CI runner reaches only the designated CML management endpoints; flag recurrence if a CML topology is reachable only from the runner's local machine.
  3. Check that traffic remains routed through the intended independent recovery path; flag recurrence if a CML simulation claims redundancy although the backup path shares the same virtual switch.
  4. Check that test execution waits for a ready topology and reports a bounded startup failure otherwise; flag recurrence if a CI job cannot access an isolated CML lab because virtual nodes are still booting.

Explanation

Correct Answer

D:

The check tests the restored condition, test execution waits for a ready topology and reports a bounded startup failure otherwise, and explicitly flags a recurrence of a CI job cannot access an isolated CML lab because virtual nodes are still booting.

Incorrect Answers

A:

This guard monitors a different regression trigger: a Cisco Modeling Labs test passes because it starts with a cached OSPF neighbor relationship. It does not directly validate the recovery condition, test execution waits for a ready topology and reports a bounded startup failure otherwise.

B:

This guard monitors a different regression trigger: a CML topology is reachable only from the runner's local machine. It does not directly validate the recovery condition, test execution waits for a ready topology and reports a bounded startup failure otherwise.

C:

This guard monitors a different regression trigger: a CML simulation claims redundancy although the backup path shares the same virtual switch. It does not directly validate the recovery condition, test execution waits for a ready topology and reports a bounded startup failure otherwise.

Question 569

A university research network is working on scheduled changes across campus switches and routing. During deployment, a Compose-defined API container loses collected device inventory after every restart. Which action most directly addresses this specific network automation problem?

  1. Mount a named or bound volume at the application data directory.
  2. Configure an appropriate named volume and verify path ownership.
  3. Pin a verified immutable image digest or version and test upgrades explicitly.
  4. Audit env precedence and configure per-environment protected inputs explicitly.

Explanation

Correct Answer

A:

The observed failure is: a Compose-defined API container loses collected device inventory after every restart. The underlying cause is: the service writes persistent data only to the ephemeral container filesystem. Verify that state survives container recreation and remains isolated to approved storage.

Incorrect Answers

B:

This would address a different condition: a Docker Compose telemetry collector loses its state whenever the container is replaced. Here, the actual issue is: the service writes persistent data only to the ephemeral container filesystem; it needs a scoped correction rather than this unrelated intervention.

C:

This would address a different condition: a Compose update unexpectedly downloads an untested image build. Here, the actual issue is: the service writes persistent data only to the ephemeral container filesystem; it needs a scoped correction rather than this unrelated intervention.

D:

This would address a different condition: a Compose job accepts development credentials in production because a.env override is loaded unexpectedly. Here, the actual issue is: the service writes persistent data only to the ephemeral container filesystem; it needs a scoped correction rather than this unrelated intervention.

Question 570

A university research network is working on scheduled changes across campus switches and routing. The team found that a Compose-defined API container loses collected device inventory after every restart. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. Recreated containers report the approved image identity.
  2. State survives container recreation and remains isolated to approved storage.
  3. Collector state survives a controlled container recreation.
  4. Effective container env contains only the intended production values.

Explanation

Correct Answer

B:

This evidence directly verifies the scoped correction, mount a named or bound volume at the application data directory, for the underlying issue: the service writes persistent data only to the ephemeral container filesystem. It should be checked against actual device or pipeline output.

Incorrect Answers

A:

This would confirm recovery from a Compose update unexpectedly downloads an untested image build, not necessarily from the reported incident. For the specified issue the relevant confirmation is: state survives container recreation and remains isolated to approved storage.

C:

This would confirm recovery from a Docker Compose telemetry collector loses its state whenever the container is replaced, not necessarily from the reported incident. For the specified issue the relevant confirmation is: state survives container recreation and remains isolated to approved storage.

D:

This would confirm recovery from a Compose job accepts development credentials in production because a.env override is loaded unexpectedly, not necessarily from the reported incident. For the specified issue the relevant confirmation is: state survives container recreation and remains isolated to approved storage.